Error while saving Production Order

Hi all
I am getting the following error while saving the Production Order -
"Class for order classification has not been generated".
I went into the custiomization settings and tried to generate the class. But I get another error "No batch input data for screen SAPMSSY3 0131". The line items are also all in red and green.
Any help would be highly appreciated.
Thanks in advance.
Hrishi

Solved.

Similar Messages

  • Base unit of measurement while saving production order

    Hi
    While saving production order I am getting following problems:
    "Material has no base unit of measure"
    Whereas UOM is there, I also can see that as soon as I  enter qty while creating the order. System automatically prompts the UOM.
    I also donot find any problem in MRP run, planned order creation etc
    So what can be the problem?
    Edited by: BNR on Nov 24, 2008 5:22 AM

    Dear,
    It may be data base problem as you are getting this problem fequently so please check with Basis person.
    Have you defined the any production unit in both material master WS view & in routing or any other alternative unit of measurement please check?
    Regards,
    R.Brahmankar

  • Error while saving Prod order - "Class for order classification"

    Hi all
    I am getting the following error while saving the Production Order -
    "Class for order classification has not been generated".
    I went into the custiomization settings and tried to generate the class. But I get another error "No batch input data for screen SAPMSSY3 0131". The line items are also all in red and green.
    Any help would be highly appreciated.
    Thanks in advance.
    Hrishi

    Solved

  • ERROR DURING SAVING PRODUCTION ORDER

    Hi GURUS,
    WHILE SAVING A PRODUCTION ORDER I AM GETTING AN ERROR START_FORM,OPEN_FORM MISSING.MSG NO IS TD423
    REGARDS
    RAMKUMAR WARIYAR

    Hi Ram
    You might have assigned print shop floor paper while saving prod order in Production Scheduling profile.  .
    You might not have defined output printer for this. If you want paper to print, set printer for this. Also check have you assgined order type in scheduling profile at the bottom for MTS, MTO, Rework. Order type for production order is picked from scheduling profile.
    Check this order is the one which you are using.
    If you do not want to print shop floor paper remove the tick.
    Regards
    J . Saravan
    Edited by: J. Saravanan on Apr 10, 2008 6:29 AM
    Edited by: J. Saravanan on Apr 10, 2008 6:30 AM

  • Error while creating Production order without BOM

    Hi Guys,
    While creating production order without a BOM i am getting the following error in the error log.
    Error: BOM for material xxxxxx does not contain any valid items
    Message no. CO636
    Kindly help.
    Regards,
    Sid

    Dear customer,
    could you check in the master data screen of the order if one BOM has been selected?
    please coudl you check your customizing the following transactions:
    OPJM
    OPJI
    what do you have in 'BOM slection field' MRP4 view of the header material?
    Please check if with this info you can find the missing data to explode the BOM
    regards
    Maria

  • Error while saving purchase order

    Hi all,
    While saving purchase order i am getting the following error.
    Syntax error in program SAPLV61A
    in include RV64A932
    in line 10
    Statement"*&"is not defined.check your spelling.
    Thanks& Regards,
    Hari.

    Hi Hari,
    I've just encountered the same problem as you have now in your latest post.
    Normally the include that you mentioned is a formula condition value include which you can modify but you probably have
    to register this object first on the SAP OSS pages to get an Access key to modify it.
    After you've obtained a key launch transaction VOFM and comment out the line "TABLES: VBRK, VBAK".
    As you see below SAP did exactly the same thing in several other includes.
    Include FV64A582
    -> is a formula condition value
        tx VOFM
                -> Formulas
         -> Condition Value
         -> Routine number 582
    At line 37 I commented out "TABLES: VBRK, VBAK." which is not used
    anyway in this include.
    On top of that SAP commented out these definitions in several other
    includes: eg. FOICH002, FOICH002, OI_LV61ATOI.
    If other persons have comments on this topic please respond/advise.
    Hari, inform us if this resolved your problem.
    Also reward points if my post aided you in resolving your issue.
    Thank you for feedback.
    Best regards,
    Tom Cockaert.

  • Error while saving service order?

    Dear SAPIENTS,
    While saving service order system is throwing error in commitment check
    message number  CO634
    can anybody tell where i need to check to resolve this problem?
    Regards,
    Kaushal Rai

    hi
    In FMAVCR01 you can see the amount avaialble for the fund center and commitment item combination ,
    in the maintenance order itself from the menu Goto>Assignments>fund center
    i think you are using the funds management where the system picks up the commitement item for the respective material in the order you specified ,kindly consult with your FICO person also
    regards
    thyagarajan

  • Error while saving sales order

    Hi I am encountering below error message while saving sales order:
    Warehouse
    Specify export data in material master
    Then I go to material master to check foreign trade export tab, and I had maintained commodity code export group, country of origin and region of origin, what did I miss? Help.

    Hi,
    Check whether you have activated legal control data for the Sales Order type configuration in Foreign Trade.
    If the Order type is activated then the following error message can pop up unless you maintain in material master.
    See whether export legal control data is activated or not for the order type.
    In IMG Sales and Distribution>Foreign trade>Legal control section
    Regards,
    Saju.S

  • Abap dump error while release Production order

    Dear Gurus,
                          Abap dump error is creating while release production order , pour some light on this issue.
    Regards,
    Kamal

    Hello,
      use transaction ST22 to analyze the error type. There you have the detail of the error message, the program and the line of the ABAP code where the dump was triggered.
    Best regards,
    Andrea

  • Error while releasing Production order

    Dear experts
    I am getting error "JV Object Type Is Required by JV Parameters for Company '1000'", message =  Message no. GJ118 while releasing Production order. Plz help me on this issue.

    Hi Harish,
    Please refer the below link, hope should be helpful
    Creating a Cost Center

  • To set an error while saving the order when the item categor changed in CRM

    Hello SAP Gurus,
    As per our current system set up, whenever the order created in CRM once replicated to ERP should not change the item category in CRM .If the item category is changed( allows the system) and saved, it gives an error as u201CItem category should not be changedu201D. We have been encountering  this type of issue since long back
    To avoid this type of issue, an error should through while saving the order when the user changes the item category in CRM.
    Can someone help me to achieve this.
    Thanks in advance.
    Cheers
    Sreedhar

    Sreedhar,
    Can't you control it by Item Category determination?
    JD

  • Cost calculation error while creating production order

    Hi, "version 0 is not defined in controlling area xxxx for the fiscal year 2008, maintain the fiscal area dependent version parameters for the version o".the above error message appears at the time of saving my production order with co01 t-code. i have tried to rectify this by okez t-code, but it gives message that "activation of the indicator is notallowed". the same message appears while releasing the order, while doing the GI . Pls suggest.

    Hi,
    Please refer the below thread.
    https://forums.sdn.sap.com/watches!add.jspa?forumID=144&threadID=484386
    Regards,
    Senthilkumar

  • Error while raising Production Order

    Experts
    I get an error for a particular Item while raising a PRODUCTION ORDER
    'Location Input does not match the warehouse location of Item'
    I work in SAP B1 2007B - PL 18
    It will be great if someone can give me the reason/solution for the above ERROR.
    REGARDS
    KARTHIK

    Hi,
    Parent item and child items warehouses location should be same.......
    Regards
    Deepak Tyagi

  • Update error while creating production order (TCODE CO01)

    Hello,
    We have created new plant into development server for testing. We have created production Order few days back at that time we have not faced any problem. But from last two days , when we create new production Order , system gives following error:
    ORA-00947: not enough values
    DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB
    SAPLCOVB" or "LCOVBF10"
    HEADER_POST"
    and
    Update was terminated
    System ID....   DEV
    Client.......   500
    User.....   HPLSU
    Transaction..   CO01
    Update key...   4B6E4F48C08D027FE1008000C0A802F3
    Generated....   08.02.2010, 10:35:48
    Completed....   08.02.2010, 10:35:49
    Error Info...   00 671: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
    Our work is held up.
    Please also note that If we increase the QTY in the existing Order ( already created few days back) , System accept the same and Order is saved.
    We are looking for the solution for the above.
    Early reply will be highly appreciated.
    thanks
    harish

    Hi Rishi,
    You better check with your BASIS team.
    Check this link also
    Supervisor Error ADM0015
    Regards,
    Satyajit Kumar
    Edited by: Satyajit Kumar on Feb 8, 2010 7:47 AM

  • Error while creating Production Order

    HI Experts,
    While creating a production order for a material with planning stratagy 82, I am getting an error saying "Error occured in number assignment for object" AUF_PLAN.
    Can you pls tell me what was the exact problem!!
    Regards
    Prasanna

    Prasanna,
    Just a basic doubt, when you are saying that the material is assigned with Planning strategy "82", what is the need to create a Production Order manually? I am not sure whether this has an effect at all...but lets try.
    Remove the strategy from Material Master MRP 3 view and then try creating the Production Order with Order type PP04, as you were trying earlier. This is just to see whether is this something related to Order type definations or Assembly Processing.
    You also try creating a sales order, when the planning strategy "82" is still exists is the material master to see whether production order is getting created automatically by system.
    Please let us know the feedback on the above
    Regards,
    Prasobh

Maybe you are looking for

  • Can I install iTunes on a virtual drive

    wondering is it possible to install iTunes on a virtual hard drive, not a USB device of any? The music library is huge and I'd like to try to conserve space on the hard drive. Thanks! Message was edited by: CoolFinalFan

  • Truncating last three characters in Mainfram GDG dataset.

    Hi Folks, I had developed a scenario IDOC - > XI -> File and this file is generated on Mainframe system as a GDG dataset . I was able to generate the file but last three characters are getting truncated for each record in the file(dataset). From XI w

  • When I import music, I don't know where its being saved.

    I have done many successful imports in my time, but suddenly my 'recently added' file has just dissapeared and the music I import isn't saved in the library file either! Any tips on where it might have gone?

  • I can't locate my downloaded files

    Yesterday I downloaded a .zip file, And today when I woke up, I tried to open the file but it didn't work. I can't locate it. Nothing happens when I press the little folder button at the left (http://i.gyazo.com/9e5b651b9050c6f3a335d52312497166.png).

  • Acrobat 8 crashes

    Acrobat 8 on Windows: Every time I open Acrobat it crashes. The error reads  "C++ Runtime Error. This application has requested the Runtime to terminate it in an unusual way." I went online and found a Solution (rename Updater) but it didn't work. I