Error while saving Reward rule version

Hi When trying to save reward rule after creaion of rule version , error while saving rule version U-00000062 001 , contact technical support. I have attached document below. Kindly advice what needs to be done.

Thanks for your fast reply.
This error is occurring in our development environment as well. Production is fine.
I had the users get out of the system last night and I tried restarting services and eventually restarting each server but nothing has cleared the error yet.

Similar Messages

Error while saving Business Rule EAS Java

Hi there all, I get the following errror when saving a business rule that actually was working fine just yesterday. Something tells me it's about network issues but i'll appreciate if anyone got the same and how to solve this. Thanks.
Error while sending command to HBR Server running within the EAS server.
Detail:com.hyperion.hbr.excp.DatabaseException.<init>(java.lang.String, [Ljava.lang.Object;, com.hyperion.hbr.excp.ExceptionSeverity, java.lang.Throwable)

Thanks for your fast reply.
This error is occurring in our development environment as well. Production is fine.
I had the users get out of the system last night and I tried restarting services and eventually restarting each server but nothing has cleared the error yet.

Improper Format error while saving for previous version

Hi all,
I have been developing some Daq code with LabView 8.5. Recently I needed to open the vi on a computer which has Labview 8. I used the save for previous version option. I used low-level vi's in my code which are both available to 8.5 and 8 instead of using new express vi's. LV warned me about converting fixed point numbers to double precision while saving, which in my opinion should not cause a problem.
I have also enabled "Show front panel when called" and "Show front panel when loaded" options from VI Properties dialog (as adviced by previous threads http://forums.ni.com/ni/board/message?board.id=170&thread.id=369331).
However I was not able to solve the problem. Are there any suggestions to solve my problems?
Thanks.
Gokcen

I dont understand exactly what the problem is.
Have you used fixed point numbers in your code? and if so does it matter if LabVIEW converts them to DBL? If not then dont worry about it.
What problem do you have with the 'show front panel when called' as it isnt clear from your message.
Also, if you can post your problem code as it makes it easier for people to see the problem
David
www.controlsoftwaresolutions.com

Error while saving RTOM based campagin when creating the rules

Hi Experts,
My requirement is to configure RTOM in the system. I have created RTOM based campaign and when I maintain conditions in u201CEligibility and Agent skills Rulesu201D assignment block, I am unable to save the campaign. It throws the following error despite maintaining all the required settings in spro.
u201C Error while saving the rule; Contact technical support
Error in rule; navigate to rule details screen to correct it
Data not saved; save log u201D
Looking forward for your responses.
Kindly guide me to a way out for resolving this issue.
Thanks in Advance,
Shruthi

Hi Shruthi,
I know this has been a long while since you posted the question, how did you resolve this error because I am getting the same error.
Many thanks,
Garikai.

Error while saving new Version

Hi,
I am creating a new version in DRM by using Copy to New feature but I am getting an error while saving that version.
The version gets created successfully but it does not allow me to save the same and gives the following error.
Serve was unable to process request--->ORA-02291:Integreity constarint (MDM_SYS_C0047065)-violated - parent key not found
Please help.

Hi,
I am creating a new version in DRM by using Copy to New feature but I am getting an error while saving that version.
The version gets created successfully but it does not allow me to save the same and gives the following error.
Serve was unable to process request--->ORA-02291:Integreity constarint (MDM_SYS_C0047065)-violated - parent key not found
Please help.

Error while saving service entry sheet

Hi Gurus
I m getting the following error while saving service entry sheet
Account determination for entry MGCA WRX not possible
Req. for help
Eldee

Hi,
Use T.code:OMWB,
Enter Chart of Account,Now you will have new screen,
Click WRX, sys will take to new screen
Click Rules,select check box of debit and credit only and save.
Now enter you G/L accounts(GR/IR) in debit and credit field and save.
Now try your transaction.
If helpful to you then reward.
Regards,
Biju K

Error while saving list workflow in sharepoint designer 2013

Hi,
I am trying to create custom workflow using sharepoint workflow 2013 at client side.While i am saving this,it thowas error-"Server side activities have been updated.you need to restart sharepoint designer to use the updated version
of activites"
I have installed 32-bit sharepoint designer 2013 in my system and i have no access to server.
I have also followed the solution and deleted the contents in the below location.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
Please help to solve the error.
Thank you

You need to install updated version of SharePoint designer.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f255f4b4-1828-4ccb-983a-5efbf0e020ae/sharepoint-designer-2013-server-side-activties-have-been-updated-prompt?forum=sharepointcustomization
Try below:
http://stackoverflow.com/questions/19652391/error-while-saving-a-workflow-via-sharepoint-designer-server-side-activities-ha

Error while saving any workflow in database

hi
i had created a simple workflow and i was trying to save in database, but i faced following problem while saving...
plz help for this
1700: Could not connect with username/password 'system/myadmin@orcl' ('ORA-12154: TNS:could not resolve the connect identifier specified
-----------------------------------------------------------------------------------------------------------------------

You need to install updated version of SharePoint designer.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f255f4b4-1828-4ccb-983a-5efbf0e020ae/sharepoint-designer-2013-server-side-activties-have-been-updated-prompt?forum=sharepointcustomization
Try below:
http://stackoverflow.com/questions/19652391/error-while-saving-a-workflow-via-sharepoint-designer-server-side-activities-ha

Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed

Dear All,
I am working on BPM 11g.
I installed the following products for BPM 11g
OS: Windows 7 SP1 Professional Edition all with 32 bit
Installed s/w:
    JDeveloper 11.1.1.6.0 Generic Version
    OracleXE 11.2 Win32
    ofm soa generic 11.1.1.6.0
    wls 10.3.5
    RCU 11.1.1.6 for schemas dev_soainfra, dev_sdpm and dev_mds - Utility run successfully.
Overall Installation is successful wth no issues.
Configuration of Weblogic server for domain is ok with admin server, soa_server1 and bam_server1 with test connections is ok.
I am using browser as Internet Explorer 9
In Jdeveloper 11.1.1.6.0 after creating application, project and process
From BPM MDS Navigator I configured the connection for Database 11g XE as well using
Override Application Server user/password
For SOA MDS I included the dev_mds user with MDS partition as obpm
tested connections all ok (weblogic and soa_server1 up and running)
In Jdeveloper I am able to export the BPM successfully.
In the BPM Project Navigator when I use the Project --> SalesQuote.jpr --> right clicking with
option as Save to BPM MDS the following error is occured as
"Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed".
If the error is resolved than I can see the project in BPM composer.
My queries on this error are
1) Has soa_server anything to do with this error
2) Is dev_mds schema to be reviewed
what can be the possibility to resolve the BPM-70801 error.
Please provide the solution ASAP or send me the reply to my [email protected]
Regards
Ajaz Ahmed

Hello Ajaz,
BPM-70801 is a very generic error that can have multiple causes. Please provide the error log from servers log file. From what I understand, you are using a separate soa_server1, so watch out /your_domain/servers/soa_server1/logs/soa_server1.log
Regards
km

Error while saving territory

Hi Experts
while saving territory, i am getting below error.
Error while saving rule score; contact technical support
Wait and try to activate the changes later
Details Could not lock object Application 'Territory Management' for processing-relevant changes due to user <user name>
Activation error for Decision Table 'table[BP_Z_SCORE,TERRITORY(Res...'; see following messages for details
Activation error for Function '005056010AED1EE48BB6A35289225BE3 : s...'; see following messages for details
I have attached screenshot to refer the error. Please get me some pointer to resolve this error..
Thanks
Chand

Did user SCBASHA lock something? You could check in transaction SM12.
Best regards,
Thomas Wagner

Error while saving agreement

Hi
I am getting an error while saving the scheduling agreement.
This is IS Auto related version.
After entering all the details required in the JIT related scheduling agreement; when i am trying to save it gives error "Call usages for xxxxand JIT customer xxxxxx do not match" and the system makes an exit. Cant save the agreement
what could be the reason.
Priyanka

Hello,
Go to JITV t-code input your Sold to Party and your JIT customer ID; select that line and click on view / display details.
Here you will have Call Type and "Usage". If the usage is E / S / M then it should be the same in your Sales Agreement.
Go to VA31 T-code input your Sold to Party (same as JITV) and then material and other details.
Then go to header "Sales" tab page. There you will find "Usage". This should be same as your JITV usage. E / S / M. Once this matches; then try saving the document.
Hope this will resolve your issue;
Regards,
Syed Nasir

Error while migrating business rules

While trying to use the export/import option in EAS to migrate business rules, we have run into an error.
The export itself is fine. When trying to import, it says this:(even though it lets me select the proper xml file for importing)
Error while migrating business rules.
Detail: The import file specified is not a valid business rules xml file. Import will be terminated.
Detail:Exception occured. Please check your log file for details.
I am pretty sure I used the inherent format specified for exporting the business rules.
Both the old and new systems are version 11.1.2.
The LCM method also failed for the business rules migration.
Any suggetions?
Thanks,
Sujani

When you export them make sure you don't have "For Calc Mgr" checked, if you do then the import with fail.
Cheers
John
http://john-goodwin.blogspot.com/

Rule Execution : Error while executing a rule session unit of work

Error while executing a rule session unit of work.
The rule session CreditRule:130002 failed to execute a unit of work.
Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
I have created a simple rule and using a decision service and a decide process activity I have tried to run the orchestration.
After compiling and saving and re-opening the orchestration flow looks correct.
When I execute the process I get the above error.
Is this something wrong with the Rule ?
Can anyone offer any advice
Thanks
Cliff

Hi.
Any further advice on this issue?
Getting the same problem and cannot figure out a solution.
How do I check the "underlying exception" btw?

Error While saving a iBot

Hi All ,
I am getting the below error while saving a iBot.
Oracle BI Scheduler Error: [nQSError: 16001] ODBC error state: S1C00 code: 106 message: [Microsoft][ODBC Excel Driver]Optional feature not implemented . at stage of execute transaction command with data source: Procurement_Demo
I am using xls as a datasource to create Repository. I have created scheduler tables for iBot in the same datasource.
Can i not use XLS as a datasource for iBot?
If i can use , what is the solution of this problem.
Thanks in advance.
-- Ashish

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error while Saving the report

Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)

As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written.

Error while saving Reward rule version

Similar Messages

Maybe you are looking for