Error while saving RTOM based campagin when creating the rules
Hi Experts,
My requirement is to configure RTOM in the system. I have created RTOM based campaign and when I maintain conditions in u201CEligibility and Agent skills Rulesu201D assignment block, I am unable to save the campaign. It throws the following error despite maintaining all the required settings in spro.
u201C Error while saving the rule; Contact technical support
Error in rule; navigate to rule details screen to correct it
Data not saved; save log u201D
Looking forward for your responses.
Kindly guide me to a way out for resolving this issue.
Thanks in Advance,
Shruthi
Hi Shruthi,
I know this has been a long while since you posted the question, how did you resolve this error because I am getting the same error.
Many thanks,
Garikai.
Similar Messages
-
Error while saving text as attachment
Hi All,
When a layout is generated. I get the following error :
Error while saving text as attachment , Size of the attachment is maximun than the size allowed.
I guess the generated layout is automatically saved as attachment. Can any one suggest how to disable the option of automatic saving as attachment
Thanks ,
KaushikHi,
if you want to keep the automatic saving as attachment you might check note 599680.
The saving is done normally in method TextGeneration in the underlying Business Object, e.g. BOSALESDOCGEN, BOACTIVITY or BOSERVICETRANSACTION. There you will find the according code lines in the end.
Regards,
Wolfhard -
Error while saving date value in Java dictionary
Hello Everybody,
I got following error while saving date value in one of the fields of the Java table.
Internal error occured in submit request: Error in method updateRequestContact : The object of type java.sql.Date with the value '2005-12-04 08:00:00.0' assigned to host variable 9 is not normalized. It must not contain time components in the time zone running the virtual machine.
I can't find why it is taking time value in the date object.
This value is coming from the RFC as a date value, and I am saving this value in Java dictionary table.
Same code for this was working fine earlier. But, now suddenly it gives error like this.
Even if I provide date on the screen from webdynpro application, this date value can't save in the Java dictionary and gives same error.
What should be the problem behind this?
Regards,
BhavikHi Satyajit,
I am getting date value from the screen of the webdynpro application from date picker control and passing this value in Java dictionary.
More Information:
I have dat value in the Date object: <b>target_date</b>
But Now I have made new Date object as following:
Date target_Date1 = new Date(target_date.getYear(),target_date.getMonth(),target_date.getDate());
Then I am passing this object to Java dictionary. Still it gives same error.
Then I have changed code as following:
int l_year;
int l_month;
int l_days;
l_year = target_Date.getYear();
l_month = target_Date.getMonth();
l_days = target_Date.getDate();
Date target_Date1 = new Date(l_year,l_month,l_days);
Now it works for me.
But I guess this is not the perment solution. It looks very strange. I have used so many date objects at various palces. So, this solution is not the final for me.
I want to findout the main cause of it.
One more thing: This code was working for a mornth or two. But, now suddenly it is giving this error.
Please help me if anybody knows.
Regards,
Bhavik -
Error while saving FYV : Gaps in financial year variant periods
Hello Experts,
We are getting an error while saving a new FYV as:
Gaps in financial year variant periods XY
Message no. FGV556
Diagnosis
The period specification has gaps. The periods must be sequentially numbered without any gaps.
System Response
Only a correctly defined period assignment can be saved.
Procedure
Define the periods with consecutive numbers.
Details: The new FYV has 52/53 weeks as posting periods depending on calendar year.
For example, we are trying to define Fisc 2009 as follows. (Fiscal year 2009 = Nov 01 2008 to Oct 31 2009).
Month-Day-Period-Yearshift
11 --- 7 --- 1 --- +1
11 --- 14 --- 2 --- +1
11 --- 21 --- 3 --- +1
11 --- 28 --- 4 --- +1
12 --- 5 --- 5 --- +1
12 --- 12 --- 6 --- +1
12 --- 19 --- 7 --- +1
12 --- 26 --- 8 --- +1
12 --- 31 --- 9 --- +1
1 --- 3 --- 9 --- 0
1 --- 10 --- 10 --- 0
1 --- 17 --- 11 --- 0
1 --- 24 --- 12 --- 0
1 --- 31 --- 13 --- 0
2 --- 7 --- 14 --- 0
2 --- 14 --- 15 --- 0
2 --- 21 --- 16 --- 0
2 --- 28 --- 17 --- 0
3 --- 7 --- 18 --- 0
3 --- 14 --- 19 --- 0
3 --- 21 --- 20 --- 0
3 --- 28 --- 21 --- 0
4 --- 4 --- 22 --- 0
4 --- 11 --- 23 --- 0
4 --- 18 --- 24 --- 0
4 --- 25 --- 25 --- 0
4 --- 2 --- 26 --- 0
5 --- 9 --- 27 --- 0
5 --- 16 --- 28 --- 0
5 --- 23 --- 29 --- 0
5 --- 30 --- 30 --- 0
6 --- 6 --- 31 --- 0
6 --- 13 --- 32 --- 0
6 --- 20 --- 33 --- 0
6 --- 27 --- 34 --- 0
7 --- 4 --- 35 --- 0
7 --- 11 --- 36 --- 0
7 --- 18 --- 37 --- 0
7 --- 25 --- 38 --- 0
8 --- 1 --- 39 --- 0
8 --- 8 --- 40 --- 0
8 --- 15 --- 41 --- 0
8 --- 22 --- 42 --- 0
8 --- 29 --- 43 --- 0
9 --- 5 --- 44 --- 0
9 --- 12 --- 45 --- 0
9 --- 19 --- 46 --- 0
9 --- 26 --- 47 --- 0
10 --- 3 --- 48 --- 0
10 --- 10 --- 49 --- 0
10 --- 17 --- 50 --- 0
10 --- 24 --- 51 --- 0
10 --- 31 --- 52 --- 0
The above entries cover all the dates in calendar year 2009, that is, Jan 2009 to Oct 2009 is covered by periods 10 to 52 and Nov 01 2009 to Dec 31 2009 is covered by period 1 to 9 of the following fiscal year 2010.
Inspite of making sure that all the days of 2009 are covered by periods 1 to 52. We are still unable to save the FYV.
Please help!
SusanHello, I am getting this error while saving the FSV. My FSV is based on Weeks. Below is what I am inputting for this. Other details are Calender Year - 2017, No. of posting periods - 53, checked year dependent. Also, I have FSV for previous years also where weeks are 52 but configured as 53. So, hope that this is not creating this issue. Solicit your early response.
Month
Day
Period
Year Shift
1
7
1
0
1
14
2
0
1
21
3
0
1
28
4
0
2
4
5
0
2
11
6
0
2
18
7
0
2
25
8
0
3
4
9
0
3
11
10
0
3
18
11
0
3
25
12
0
4
1
13
0
4
8
14
0
4
15
15
0
4
22
16
0
4
29
17
0
5
6
18
0
5
13
19
0
5
20
20
0
5
27
21
0
6
3
22
0
6
10
23
0
6
17
24
0
6
24
25
0
7
1
26
0
7
8
27
0
7
15
28
0
7
22
29
0
7
29
30
0
8
5
31
0
8
12
32
0
8
19
33
0
8
26
34
0
9
2
35
0
9
9
36
0
9
16
37
0
9
23
38
0
9
30
39
0
10
7
40
0
10
14
41
0
10
21
42
0
10
28
43
0
11
4
44
0
11
11
45
0
11
18
46
0
11
25
47
0
12
2
48
0
12
9
49
0
12
16
50
0
12
23
51
0
12
30
52
0
12
31
1
+1
Thanks
Deepankar -
Hello Experts,
I am facing an issue while saving a BO. We have a Z-BO which works very well in 4.0. We have upgraded to 7.0 and we are facing the issue while trying to save an entry from the list tile.
The BO is configured as a child segment of BDOC CAPGEN_OBJECT_WRITE. We have a Z-table which should be populated with the grid entry details.
When I try to save, it raises an error "Error while saving", and if I check the error from the Windows menu, I can see the context as "UI_CORE_SAVE_FAILED_STA". Any idea if there may be issue with Anchor mapping or something else?
I tried debugging it and it does not stop anywhere. It seems that this is not due to programming logic. I am stuck here for quite sometime. Kindly advise.
Appreciate your valuable feedback on this. Thanks in advance.
Regards
PijushHi Wolfhard,
Thanks for your reply.
The table is generated successfully in the laptop - there is no error when I generated the table using client console. Do I need to check anything else in this regard?
Regarding the BDOC, this Z-table (and BO) is mapped as a child segment of BDOC CAPGEN_OBJECT_WRITE (which is a Synchronization (Write) BDoc). When the system is upgraded (from 4.0 -> 7.0), the Z-segment was missing in Sandbox system. I have added the Z-segment again to BDOC CAPGEN_OBJECT_WRITE based on the old system (4.0) details.
Will there be a chance of impact due to that due to upgrade? Any other things to check? Appreciate your help.
Regards
Pijush -
RUn time error while saving po Field symbol has not yet been assigned.
Hi Experts,
I am getting abap dump while saving PO in ME21N plz seee the below dump plzzzzzzzzzzzzzzzzzzzzz help me
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 19.06.2009 11:24:46
Short dump has not been completely stored (too big)
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 106).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"SAPLKKBL" or "LKKBLF99"
"GEN_FIELD_OUT2"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
em environment
SAP-Release 700
Application server... "gplqty"
Network address...... "128.12.0.19"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "GPLQTY"
Database type..... "MSSQL"
Database name..... "GPQ"
Database user ID.. "gpq"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 4 2008 02:33:25"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 172
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 237568
MM Used. 12036016
MM Free. 530432
er and Transaction
Client.............. 410
User................ "SAP_SUPPORT"
Language key........ "E"
Transaction......... "ME21N "
Transactions ID..... "9E955CDE97CBF1648B4C001A64C7B85A"
Program............. "SAPLKKBL"
Screen.............. "SAPLKKBL 0500"
Screen line......... 3
Information on where terminated
Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
The main program was "RM_MEPO_GUI ".
In the source code you have the termination point in line 2908
of the (Include) program "LKKBLF99".
Source Code Extract
Line SourceCde
2878 else.
2879 assign <fs11> to <field>.
2880 gs_fc = gs_sfc11.
2881 endif.
2882 when 012.
2883 if gs_out_flags-slave ne 'X'.
2884 assign <fm12> to <field>.
2885 gs_fc = gs_mfc12.
2886 else.
2887 assign <fs12> to <field>.
2888 gs_fc = gs_sfc12.
2889 endif.
2890 when 013.
2891 if gs_out_flags-slave ne 'X'.
2892 assign <fm13> to <field>.
2893 gs_fc = gs_mfc13.
2894 else.
2895 assign <fs13> to <field>.
2896 gs_fc = gs_sfc13.
2897 endif.
2898 when 014.
2899 if gs_out_flags-slave ne 'X'.Hi,
this error occurs when you try to address a field-symbol before it has been assigned to a field or
the assignment has failed.
Use following code to remove this dump
Assign <mara-matnr> to <fs>.
if sy-subrc <> 0.
Error Message.
Endif.
Hope it helps,
Raj -
Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed
Dear All,
I am working on BPM 11g.
I installed the following products for BPM 11g
OS: Windows 7 SP1 Professional Edition all with 32 bit
Installed s/w:
JDeveloper 11.1.1.6.0 Generic Version
OracleXE 11.2 Win32
ofm soa generic 11.1.1.6.0
wls 10.3.5
RCU 11.1.1.6 for schemas dev_soainfra, dev_sdpm and dev_mds - Utility run successfully.
Overall Installation is successful wth no issues.
Configuration of Weblogic server for domain is ok with admin server, soa_server1 and bam_server1 with test connections is ok.
I am using browser as Internet Explorer 9
In Jdeveloper 11.1.1.6.0 after creating application, project and process
From BPM MDS Navigator I configured the connection for Database 11g XE as well using
Override Application Server user/password
For SOA MDS I included the dev_mds user with MDS partition as obpm
tested connections all ok (weblogic and soa_server1 up and running)
In Jdeveloper I am able to export the BPM successfully.
In the BPM Project Navigator when I use the Project --> SalesQuote.jpr --> right clicking with
option as Save to BPM MDS the following error is occured as
"Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed".
If the error is resolved than I can see the project in BPM composer.
My queries on this error are
1) Has soa_server anything to do with this error
2) Is dev_mds schema to be reviewed
what can be the possibility to resolve the BPM-70801 error.
Please provide the solution ASAP or send me the reply to my [email protected]
Regards
Ajaz AhmedHello Ajaz,
BPM-70801 is a very generic error that can have multiple causes. Please provide the error log from servers log file. From what I understand, you are using a separate soa_server1, so watch out /your_domain/servers/soa_server1/logs/soa_server1.log
Regards
km -
Hello
We are using SRM7 Extended classic scenario.
We don't use shopping carts, rather create POs directly in SRM which will be transferred to ECC as per the standard.
Error:
I am getting an error "Error while saving Long Texts" during my PO creation. I get this message in a small pop-up screen. As soon as i click ok or close the pop up screen it kicks me out of the PO creation screen back into the main SRM screen.
When:
During the PO Creation
Any specific situation:
Yes, only for Material POs
This is happening when I am creating the PO with a Material code. I can create free text PO without any issues.
This is a standard message and the message number is 022.
Thaks for the help guys.Hi,
To confirm can you check commeting "getOADBTransaction().commit();" gives any error message?
If yes then you can try the following option:
Have you checked whether the "/" is changed to "\" in the dbc file?
In the following two entries the slash has to be made as shown below:
APPS_JDBC_URL=jdbc\:oracle\:thin\:@(DESCRIPTION\=(ADDRESS_LIST\=(LOAD_BALANCE\=YES)(FAILOVER\=YES)(ADDRESS\=(PROTOCOL\=tcp)(HOST\=10.100.503.6)(PORT\=1521)))(CONNECT_DATA\=(SERVICE_NAME\=VIS)))
JDBC\:processEscapes=true
Thanks and Regards,
Lacman -
Error while saving ARE1 if print option is selected
dear all ,
i am getting below error while saving the ARE 1 document if i select the print ARE 1 document
if i am not selecting the document is getting posted but not able to take print out as its going for dump error
Specify either address number or address handle(AM053)
Kindly do needful
THanksHi ,
thanks i have checked with my abaper . but the major problem is when tick the check box while creating the ARE 1 above issue is coming so that may be the reason why the dump is coming in the form and now when i checked for ARE 3 the same issue is coming again.
i checked the configuration with other client related to CIN but everything is same but the issue is only with this client.
Regards -
Error while saving config in MSY
Hi,
I am working on taking MSA 5.0 SP7 go-live. I am working in MDW. I posted a SDN post long back regarding the custom partner functions in MSA and got it resolved (followed the note 521871). I am trying to do the same in the PROD system and i am facing errors:
-> When i goto Cross-Component Settings->Relationship Categoty-> click on NEW i am getting the errors:
1. 'MTBLLFW-The attribute destination of the business object
relation type is not valid'.
2. 'MTBLLFW-the attribute source of the business object relation
types is not valid'
But it is allowing me to add an entry. When i save my customer entry i am getting the error :
3. 'UI_CORE_SAVE_FAILED_STA-Errors while saving'.
I ran the consolidated prefill for 5.0 and SP07. I followed the same procedure as i did in DEV. In DEV i never got these errors. I was able to create them in the first attempt.
If anyone has any idea please let me know.
Thanks in advance,
Karuna.Hi,
did you already check i.e. compare the customizing subscriptions for both DEV MDW and PROD MDW sites?
Also you should check & compare the download monitor for CDB load in the CRM system(s).
I assume sth is missing there (see also your other post).
Regards,
Wolfhard -
WCM Error while saving Project
Hi,
I am getting following error while saving new created project in cProject.
Saving is not possible because the WFM Core data could not be adjusted
Message no. PRP086
Diagnosis
When checking the project role or project role staffing, differences to the related WFM Core data were found. The project cannot be saved because the data cannot be adjusted. Possible causes for this include:
The WFM Core is not installed locally. When working with the application, the WFM Core service is suddenly no longer available.
The WFM Core configuration has been changed in Customizing.
The WFM Core is only activated after projects have been created. During the automatic adjustment of data, it is determined that resources unknown in the WFM Core are assigned to existing project role staffing.
When working with the application, an existing resource already assigned in the WFM Core is deleted.
System Response
The project cannot be saved.
Procedure
Contact the system administrator if the required resource is not known in the WFM Core. The project can be saved as soon as the resource is created.
Let me know how to resolve this issue??
Thanks in advance,
Atul.hi Atul,
Are you using WFD server for your resource planning in cProjects???
If yes, you have to do settings in customizing for the same in Workforce deployment server under Resource Management in cProjects.
If not, then do following settings to remove the error you are getting:
1) SPRO -> Collaboration Projects -> Resource management-> Business Partner-> Set Up Integration of HR,
Maintain following setting:
Group Sem. abbr Value abbr Description
HRALX HRAC X Activate HR Integration
2) SPRO -> Collaboration Projects -> Resource management Qualification Management-> Activate Qualification Search and Matchup Using WFM Core
In this, deactivate the use of WFD Core for the qualification match up and the search by deleting the X under Value abbr. in the activity Activate Qualification Match up and Search Using WFM Core.
Hope this will be helpful to you.
Regards,
Niraj Sikligar -
CAD Integration - Error While Saving file
Hi,
Im having One Document type "DRW" which was working fine with all the functionalities.
After that i created another document type "PDW". Now all the functionalities are working fine for this Document type and not for "DRW".
Im getting an error while saving the drawing file in AutoCAD.
For DRW Type, I can able to create a DIR. After creating DIR if i click save button im getting this error.
RFC_SYS_EXCEPTION
SAP RFC error
Operation: BAPI_DOCUMENT_CHANGE2
Group : 104
Key : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Reading titleblock data for 0000000000000010000000458/DRW/000/00...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: CAD_GET_TITLE_BLOCK_DATA
Group : 104
Key : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Reading titleblock data for 0000000000000010000000458/DRW/000/00...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: CAD_GET_TITLE_BLOCK_DATA
Group : 104
Key : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Reading titleblock data for 0000000000000010000000458/DRW/000/00...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: CAD_GET_TITLE_BLOCK_DATA
Group : 104
Key : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Reading titleblock data for 0000000000000010000000458/DRW/000/00...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: CAD_GET_TITLE_BLOCK_DATA
Group : 104
Key : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Updating document info record 0000000000000010000000458/DRW/000/00 ...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: BAPI_DOCUMENT_CHANGE2
Group : 104
Key : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Command:
Command: Conversion to JPG done.
Checkin file into the existing storage category ZMRK ...
E26 253 Error while checking in and storing:
C:\SapWorkDir\AcadM\ConvertTempPath\10000000458_DR
But there is no error in "PDW" document type.
Anybody have any idea on this?
Regards,
MRK.Hi MRK,
Check the Status in DC10.
Also make sure you have configured in dc30
If possible send me the config file (.cfg)* to [email protected]
I ll check n revert back...
Have you done any settings based on document type in CFG file?
Niranjan
Award points if useful...
Edited by: Niranjan Dandekar on Mar 7, 2008 1:42 PM -
I keep getting "Unknown Error while saving"
I keep getting "Unknown Error while saving"
Using APE-11 on Windows 7- This error is a first for me, after many years of using Premiere. The product is a mix of photos (jpg and png), video clips (mpg-2 and mp4), and audio clips (all mp3). When I try to publish as Standard DVD- MPEG-2. I get the error. Error repeats saving as MP4. Error gives no location on the timeline where it is running into an obstacle to saving, so I do not know where to begin looking to remove repair or replace the item causing the 'unknown error'. The prel runs fine, start to finish, giving no indication that the save may run into a problem on final rendering.
I have tried many different options like rendering the entire timeline prior to saving, converting the clips to all be the same format, with no resolution to the problem.
I have worked many long hours for many weeks on this project, and I am not going to give it up, especially when the majority of the clips were created on APE in the first place, and the images are all Photoshop edited images
HELP PLEASE!!
DougNScreenshot of error message for above issue
Also: Since first report, I have attempted render with all sound clips removed (easiest to to with hundreds of clips/photos), with no help. Same error appears.
I will continue removing aspects of the project until I get a completed save, or until I get an answer here!
After removing the sound and video clips, video saved ok, with blank spots where the missing video clips were. So I reopened the original prel file, and began checking them individually.
When I checked the clip properties, it correctly identified the path to the source video, but when I asked it to 'reveal in project', I got this error
So I assume this is where the SAVE error is happening, but as I am not an Adobe coder, I have no idea what it is telling me.
I did check to insure that the source video from which this clip originates, is in the project assets. I checked all the other clips as well, and any clip from this source video, generates the same error.
The source video runs fine on its own and is an mpeg-2 file.
Properties of the source video are: -
Hi All ,
I am getting the below error while saving a iBot.
Oracle BI Scheduler Error: [nQSError: 16001] ODBC error state: S1C00 code: 106 message: [Microsoft][ODBC Excel Driver]Optional feature not implemented . at stage of execute transaction command with data source: Procurement_Demo
I am using xls as a datasource to create Repository. I have created scheduler tables for iBot in the same datasource.
Can i not use XLS as a datasource for iBot?
If i can use , what is the solution of this problem.
Thanks in advance.
-- AshishHi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written.
Maybe you are looking for
-
Premiere Timelines - Best Practice and Workflows
Hello all, I am wondering if you can offer some advice. I have been a Final Cut Pro 7 user my whole life - and more recently FCP X. We are currently looking into the possibility of switching some of our programs over to Premiere because it seems to h
-
How can i paste text from Numbers too Pages without getting the box/frames?
I have a big list in numbers with a lot of text in each line. I need to copy/paste it in to a pages document but i don't want the frames to come along.
-
Cobol and C Compiler for Sun OS 5.9
Hi, We need to install the following on our Sun Sparc 9 (5.9) OS 1. Cobol Compiler 2. "C" Compiler Could someone please help us find out where to get these from . If no freeware is available for both these compilrers, then could you please direct us
-
Re : Multiple Workitem Execution
Hi , I'm using sap 4.7 and created a workflow for plant wise material release . I would like to execute multiple workitems in one go. Just gone thru postings in SDN , SAP Help and i could not able find much information on this topic. Do w
-
Hello, I need adobe air for open a software but there is an error : "Unhandled exception Error: Directory can't be written to" errorID=5006. Somebody has solution? Thanks for your help.