Error while saving the FM8 XML file

Hello,
While saving the FM8 XML file, an error message appears (see attached screen shot).
Is there a solution to resolve this issue? Please suggest.

Hi,
This type of error is non-descript and could be caused by any number of things. It is impossible to troubleshoot from here based solely on that message. Let me ask a couple of questions, though:
- Are you using structured FrameMaker? If so, are you using a structured app that has worked successfully before? In other words, did this just suddenly start happening to an otherwise-stable process?
- Is there anything unusual about your layout; that is, anything other than a single text flow with graphics?
Russ

Similar Messages

Error while Saving the report

Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)

As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written.

Error while saving the excise invoice

Hi All,
I am getting the following error while saving the excise invoice.
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.
I have read all the posts with regards to the error before, however still after doing the required settings I am getting the error. Please let me know for the same.
Kind Regards
Atul Keshav

Dear All,
The issue stands resolved please find below the required settings which need to be done.
You need to maintain the following entries in J_1ITRNACC table
100 DLFC 01 CR PLAAED
100 DLFC 01 CR PLABED
100 DLFC 01 CR PLACESS
100 DLFC 01 CR PLASED
100 DLFC 01 CR PLAAT1
100 DLFC 01 CR RG23AAt1
100 DLFC 01 CR RG23AED
100 DLFC 01 CR RG23BED
100 DLFC 01 CR RG23SED
100 DLFC 01 DR MSUSP
Also the table J_1ITRNACC should include entries for GRPO, CAPE, DIEX, EWPO,
TR6C with subtransaction type 01.
We need to maintain GL Accounts accordingly in the table J_1IEXCACC.
If still the error persists then you need to apply the following notes.
1018071
978186
1032813
The SAP note 1032813 contains the correction for the program MJ1IINF01
you will have to apply this manually.
Kind Regards
Atul Keshav

PSC 2510 - Wireless setup - "Error while saving the settings to the device."

While trying to setup my PSC 2510 to be wireless I get an error message "Error while saving the settings to the device.". This comes after selecting connecting Through Network, selecting printer device, selecting WEP, entering key, and clicking next.
PSC 2510
Windows Vista
Using latest sfotware from HP to install
Thanks
Dennis
This question was solved.
View Solution.

ISSUE RESOLVED .. based on responce from PrintDoc to penn (refrence topic "C4385 Printer - Netgear DGN2000 - wireless setup".
PrintDoc responce helped me find my problem (to reset network settings on the printer to factory) even though diffrent printer.
Thanks

Error While saving the Production Order

Dear Experts
Pls let me know why am getting the below error while saving the production order after release..
PSFC_STD_LAYOUT does not exist
Message no. SSFCOMPOSER004

Dear,
Please check have you assigned the scheduling profile in work scheduling view of materail master?
Then go to OPKP check the same scheduling profile where you have activited the On realese execute printing remove this tick mark and then try with new order.
Or you can do the configuration in Tocde :OPK8 here assign the PSFC_STD_LAYOUT in forum.
Regards,
R.Brahmankar

Error while accessing the application server file

Hello,
When I try to load the data from CSV file to PSA , I am getting following error message
"Error while accessing the application server file"
"Errors in source system"
I gave the right file path
I am not sure about this error message.
Thanks,

Hi ram,
if you have more than one application server running in your BI system (see at transaction SM51) be aware that your infopackage will be executed on the right one. Each application server has its own file system and your job need to run on the server your file is stored on.
Also check if the os user of the SAP system itself (<sid>adm on Unix) has rights to read that file.
Bye
Frank

"The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file

Hi Techys,
can you give me the suugestions for below error in sharepoint 2010.
Error: "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file.
User having the contribute permission.
as a admin i can open the document without any error.
user wants to open the document via online and VPN connection.
while the user seeing the document info the below error is indicationg .
Offline Copy, Work book is readonly Mode.
The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file which was upto date.
Many Thanks,
Madhu

Make sure that the user is able to access workstream from the site collection through VPN. If the user is able to access already, try to download the file locally and see if the data is getting loaded and upload again.
--Cheers

I am getting some errors while distilling the post script file.

I am getting some errors while distilling the post script file. please check and suggest me, how to control this?
<PDFX ISO="15930-1:2001" COMPLIANT="true">
PDF/X Compliance Report
1. Summary
   Warnings: The total found in this document was 0.
   Violations: The total found in this document was 0.
   No problems were found in the document.
   This document passes PDF/X-1a:2001 compliance checks.
</PDFX>
Regards,
Jack

@Jack – you were using a joboptions file by Distiller to convert a PostScript file to a PDF/X-1a.
What you get is no error message, just a report, that everything went ok. And in this case I cannot see any advantage using PDF Export for printing to PostScript/distilling to PDF. Ok, maybe one, CS5 and above would export in a background process.
To prevent InDesign flattening transparency, you could use PDF/X-4 as your export setting. You cannot use writing to PostScript for that task.
Check including tags for tagged export to prevent misalignment of text because of a strange bug with PDF Export when you are using 9pt text on 12pt leading or text with a ratio of 9/12 for point size and leading in multicolumn text frames.
Uwe

Automatic Picking giving error while saving the Delivery

Hi
We have done the configuration for doing automatic picking while saving the delivery.
Steps done are
1. TCode V/38
2. TCode OVLT where we have changed the Time value form 3 to 4 for Send Immediate
3. TCode VP01SHP where all shipping points are maintained.
we are getting the following error while saving the delivery.

Execute ST22 and go through the explanation given under the tab "Error analysis" and "How to correct the error". Ask your ABAP team to look into this if you are not able to find out the root cause of the issue.
G. Lakshmipathi

Error while saving the excel file

hai all,
i had an requirement to upload customer master data through lsmw while saving the data in excel file with extension as) text( tab delimeted)(.txt) it is not saving and displaying the message as " the selected file type doesnot support workbooks that contain multiple sheets. to save only the active sheet click ok."
regards,
karthik

Ensure that you have not opened any excel file or text file with similar name.
thanks
G. Lakshmipathi

Error while saving the GTC

Hi All,
I am getting below error message, when I try to save GTC created.
"An error occurred while saving the information for generic technology connector S2TSI TRUSTED CONNECTOR. Check the application logs for more details. "
Even I am getting the same error when I try to modify the existing GTC connectors.
Can someone please let me know how to resolve this issue. I am not able to locate the log files where I need to check.
Thanks in advance.....
Regards
Arun

Hi Arun,
what type of GTC you are creating (Flat file / Database)?
Regards,
Sheik

Error while importing data from XML file to a Oracle database

I am getting the following error while importing data
*** atg.xml.XMLFileException: No XML files were found for "/Dynamusic/config/dynamusic/songs-data.xml".
The files must be located under the name "/Dynamusic/config/dyna
*** java.io.FileNotFoundException: D:\MyApp\ATG\ATG10.0.3 (Access is denied)
java.io.FileNotFoundException: D:\MyApp\ATG\ATG10.0.3 (Access is denied)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:120)
        at atg.adapter.gsa.xml.TemplateParser.importFiles(TemplateParser.java:6675)
        at atg.adapter.gsa.xml.TemplateParser.runParser(TemplateParser.java:5795)
        at atg.adapter.gsa.xml.TemplateParser.main(TemplateParser.java:5241)
I have placed the FakeXADataSource and JTDataSource properties files as required. In fact I have been able to import data in all machines. Just this one machine is giving problems. I have also checked out the access rights. Can someone help me please?

Confirm that you have access to D:\MyApp\ATG\ATG10.0.3 and existence of Dynamusic/config/dynamusic/songs-data.xm

Getting Brain Error while saving the query--Need Immediate solution

Hello Experte
I designed query like this.
G/L account structure is defined in Rows. Before explaining about columns Let me Explain u about my ORG structure.
Company codes are defined in R/3 like this.
Company Code
1000 for Local Currency(HSL01)
2000 to 7000,IEL for group Currency(KSL01).
Iu2019m extracting the data as it is from R/3 to DSO and again by writing routine I splitter the data for months(EX: HSL01 is ApriL,Hsl02 May,u2026u2026u2026u2026u2026u2026.KSL01 April, KSL02 may,u2026u2026u2026. Upto to 16 periods) this is R/3 data. This data I differentiated based upon currency types. If currency type is 10 then Local Currency 30 Means Group Currency.
Again Iu2019m receiving the data from Flat Files for subsidiaries(IEAI,IEG,IEEL,ISSCI,IHAL,TTM-US,TTM-INDIA,TTIT). This data I loaded first into DSO by writing Routine at field Level for G/L account to convert G/L Descriptions into Numbers.
After that I loaded data from first DSO to Second DSO by writing to convert respective currencies into INR and again loaded to cube by Direct mapping.
Again Iu2019m receiving the eliminations data from R/3 through Ztable. This also Iu2019m extracting from R/3 and loaded into dso and again into cube.
Now I will Explain about my Report.
In Columns I defined 3 selections for each month. U can observe that in Document. Like that for each month Iu2019m getting three selections and for subsidiaries 2 selections for each month. If we observe total Iu2019m getting 13 selections for India and 9 selections for each subsidiary. If subsidiaries increase I need to increase selections, automatically columns will increase. Now for Q4 2 new subsidiaries are added I need to added. After adding and while saving the query then only Iu2019m getting brain error.
Could any one sort out this.
Thanks,
Sony

HI Ravi,
Thanks for the reply.
While saving the query in BEX i'm getting this error.
Diagnosis
Query ZQ3_MISGRPSUMMARYREPORT_010209 contains 8192 differing selection cells. However, only 8191 selection cells can be processed in a query.
Procedure
Please simplify query definition ZQ3_MISGRPSUMMARYREPORT_010209.
This was the error i'm getting. How to simplify this....
Any answers please.
Thanks,
Sony

Error while saving the Sales Order

Hi experts,
i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
Thanks.

I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
If you see what they are, you can check to see what the usages represent. Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc. In our system, we only have A entries.
What are the usages for the 521 entries? Do they relate to Free Goods/Pricing???
Does the table KOTN521 exist in the ABAP Dictionary?
Answering these questions may get you closer to the answer.
Can you compare the values in these entries to what you have in different SIDs?
Is this problem happening in Production, or is it still in a development or Quality Assurance client?
If it is still in development or Q, then it may be that a recent customization change was made.
Compare the entries across your systems, if possible.
Good luck
Brian

RE: GETTING AN ERROR WHILE LOADING ACL USING XML FILE

I have generated several XML files (ACL) to load in the share services but when I do I get the following error message:
"Errors occured during syncrhonization: [com.hyperion.planning.DuplicateUserException: Another user with the name admin already exists.]."
I am not sure how to resolve this issue. Any help and/or assistant is greatly appreciate it.
fsanchez

Let me take that back. I have one or more user with admin privileges. Here is one of the sample XML files that I created.
<? xml version = "1.0" encoding = "UTF-8" ?>
<acls>
<acl>
<name>ABN_NW_PD</name>
<objectName>ABN-NW PD</objectName>
<objectType>SL_DIMENSION</objectType>
<accessMode>READWRITE</accessMode>
<flag>@IDESCENDANTS</flag>
<isUser>N</isUser>
</acl>
<acl>
<name>ABN_NW_PD</name>
<objectName>Actual</objectName>
<objectType>SL_DIMENSION</objectType>
<accessMode>READ</accessMode>
<flag>MEMBER</flag>
<isUser>N</isUser>
</acl>
<acl>
<name>ABN_NW_PD</name>
<objectName>Balance Sheet</objectName>
<objectType>SL_DIMENSION</objectType>
<accessMode>READWRITE</accessMode>
<flag>@IDESCENDANTS</flag>
<isUser>N</isUser>
</acl>
<acl>
<name>ABN_NW_PD</name>
<objectName>Budget</objectName>
<objectType>SL_DIMENSION</objectType>
<accessMode>READWRITE</accessMode>
<flag>MEMBER</flag>
<isUser>N</isUser>
</acl>
<acl>
<name>ABN_NW_PD</name>
<objectName>Final</objectName>
<objectType>SL_DIMENSION</objectType>
<accessMode>READ</accessMode>
<flag>MEMBER</flag>
<isUser>N</isUser>
</acl>
<acl>
<name>ABN_NW_PD</name>
<objectName>Income Statement</objectName>
<objectType>SL_DIMENSION</objectType>
<accessMode>READWRITE</accessMode>
<flag>@IDESCENDANTS</flag>
<isUser>N</isUser>
</acl>
<acl>
<name>ABN_NW_PD</name>
<objectName>Property Director Budget Process</objectName>
<objectType>SL_TASKLIST</objectType>
<accessMode>READ</accessMode>
<flag>MEMBER</flag>
<isUser>N</isUser>
</acl>
<acl>
<name>ABN_NW_PD</name>
<objectName>Property Directors</objectName>
<objectType>SL_FORMFOLDER</objectType>
<accessMode>READWRITE</accessMode>
<flag>@IDESCENDANTS</flag>
<isUser>N</isUser>
</acl>
<acl>
<name>ABN_NW_PD</name>
<objectName>Statistical Accounts</objectName>
<objectType>SL_DIMENSION</objectType>
<accessMode>READWRITE</accessMode>
<flag>@IDESCENDANTS</flag>
<isUser>N</isUser>
</acl>
<acl>
<name>ABN_NW_PD</name>
<objectName>Working</objectName>
<objectType>SL_DIMENSION</objectType>
<accessMode>READWRITE</accessMode>
<flag>MEMBER</flag>
<isUser>N</isUser>
</acl>
</acls>

Error while saving the FM8 XML file

Similar Messages

Maybe you are looking for