Error while saving the same model in the

Hi,
I have created a model in one package and deleted the model due to some problem.Now i have created the same model but in the different package.Now,in the default webdynpro generated code i am getting errors.
Can any one provide solution.
Thanks in advance.
Kiranmai.S

Hi,
try this procedure once.
from navigator go to your dc and find out the "gen_wdp" folder and from "packages" folder find out the deleted model name folder "modelName" and remove it.
rebuild the dc.
delete it from the nwds.
now from the "development configurations perspective" create project for the dc.
now run the application.
Regards,
ramesh

Similar Messages

Error while saving a Sales Order in the CRM Mobile Application

Hi,
I am facing issues while saving a Sales Order in the CRM Mobile Application. I am getting the error message "Value Field KvLangu is not valid (Error: 236 / 1102)".
I would be very grateful if somebody had faced this issue before and this way could help me with some information.
Best Regards,
Rogerio Prado.

Hi Rogerio,
You should put mobile sales related messages in the forum "CRM Mobile applications"
This error message is coming because the language table SMOT002 might be empty in your mobile client OR it does not have all the values which have been customized in the system.
You need to have subscription based on publication "customizing objects" assigned to your site.
Regards
Vivek

Does 1067mhz ram is the same model with the 1066mhz ram

Just noticed that the RAM speed in my (MBP 15 inch 2.66 i7 - mid 2010 version) specs is 1067MHz and from what i know is all the ram that are available in the market are 1066 mhz, so is it the 1066mhz and 1067mhz is the same or is different model. Just curious if i get the 1066 ram to replace on my mcp will it cause any problem?

I'm not 100% sure about this one, but afaik this difference is simply an issue of different rounding behaviours. The real frequency will probably be somewhere 'round 1066,66 MHz, which is interpreted as 1067 by your system profiler.
So if you make sure the timings are the same, you'll be just fine. To be on the safe side, just open your MB and have a look on the label of the RAM that's already inside, and buy similar bars.

Error while saving

Hello Experts,
I am facing an issue while saving a BO. We have a Z-BO which works very well in 4.0. We have upgraded to 7.0 and we are facing the issue while trying to save an entry from the list tile.
The BO is configured as a child segment of BDOC CAPGEN_OBJECT_WRITE. We have a Z-table which should be populated with the grid entry details.
When I try to save, it raises an error "Error while saving", and if I check the error from the Windows menu, I can see the context as "UI_CORE_SAVE_FAILED_STA". Any idea if there may be issue with Anchor mapping or something else?
I tried debugging it and it does not stop anywhere. It seems that this is not due to programming logic. I am stuck here for quite sometime. Kindly advise.
Appreciate your valuable feedback on this. Thanks in advance.
Regards
Pijush

Hi Wolfhard,
Thanks for your reply.
The table is generated successfully in the laptop - there is no error when I generated the table using client console. Do I need to check anything else in this regard?
Regarding the BDOC, this Z-table (and BO) is mapped as a child segment of BDOC CAPGEN_OBJECT_WRITE (which is a Synchronization (Write) BDoc). When the system is upgraded (from 4.0 -> 7.0), the Z-segment was missing in Sandbox system. I have added the Z-segment again to BDOC CAPGEN_OBJECT_WRITE based on the old system (4.0) details.
Will there be a chance of impact due to that due to upgrade? Any other things to check? Appreciate your help.
Regards
Pijush

Error while saving the excise invoice

Hi All,
I am getting the following error while saving the excise invoice.
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.
I have read all the posts with regards to the error before, however still after doing the required settings I am getting the error. Please let me know for the same.
Kind Regards
Atul Keshav

Dear All,
The issue stands resolved please find below the required settings which need to be done.
You need to maintain the following entries in J_1ITRNACC table
100 DLFC 01 CR PLAAED
100 DLFC 01 CR PLABED
100 DLFC 01 CR PLACESS
100 DLFC 01 CR PLASED
100 DLFC 01 CR PLAAT1
100 DLFC 01 CR RG23AAt1
100 DLFC 01 CR RG23AED
100 DLFC 01 CR RG23BED
100 DLFC 01 CR RG23SED
100 DLFC 01 DR MSUSP
Also the table J_1ITRNACC should include entries for GRPO, CAPE, DIEX, EWPO,
TR6C with subtransaction type 01.
We need to maintain GL Accounts accordingly in the table J_1IEXCACC.
If still the error persists then you need to apply the following notes.
1018071
978186
1032813
The SAP note 1032813 contains the correction for the program MJ1IINF01
you will have to apply this manually.
Kind Regards
Atul Keshav

Error While saving the Production Order

Dear Experts
Pls let me know why am getting the below error while saving the production order after release..
PSFC_STD_LAYOUT does not exist
Message no. SSFCOMPOSER004

Dear,
Please check have you assigned the scheduling profile in work scheduling view of materail master?
Then go to OPKP check the same scheduling profile where you have activited the On realese execute printing remove this tick mark and then try with new order.
Or you can do the configuration in Tocde :OPK8 here assign the PSFC_STD_LAYOUT in forum.
Regards,
R.Brahmankar

Error while saving RTOM based campagin when creating the rules

Hi Experts,
My requirement is to configure RTOM in the system. I have created RTOM based campaign and when I maintain conditions in u201CEligibility and Agent skills Rulesu201D assignment block, I am unable to save the campaign. It throws the following error despite maintaining all the required settings in spro.
u201C Error while saving the rule; Contact technical support
Error in rule; navigate to rule details screen to correct it
Data not saved; save log u201D
Looking forward for your responses.
Kindly guide me to a way out for resolving this issue.
Thanks in Advance,
Shruthi

Hi Shruthi,
I know this has been a long while since you posted the question, how did you resolve this error because I am getting the same error.
Many thanks,
Garikai.

"An error occured while working on the Data Model in the workbook" on some workbooks published to Power BI site

Hello,
I am using the Power BI for Office 365, and I have published several Excel 2013 workbooks having Power Pivot Data Models.
I have a problem on some of the workbooks, once a slicer is selected, I get the error: "An error occurred while working on the Data Model in the workbook" and the slicers do not affect the charts.
Some workbooks work perfectly fine. I am using the same user for all workbooks when creating and publishing. I tried with small workbooks less than < 10 MB size and larger workbooks > 10 MB. There is no rule, some workbooks larger than 10 MB work perfectly
with the slicers effecting the charts, and some don't. Similarly for smaller size.
Any ideas of how I can debug the cause of the issue?
Appreciate any feedback,
Thanks,
Grace

Hi Grace,
I assume that the experience in the Excel client is working fine, right?
Are you getting a correlation id with the error?
Please send us a bit more information / samples to reproduce over email to
this address.
thanks,
Guy
GALROY

Error while Saving the report

Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)

As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written.

Error while saving the Sales Order

Hi experts,
i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
Thanks.

I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
If you see what they are, you can check to see what the usages represent. Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc. In our system, we only have A entries.
What are the usages for the 521 entries? Do they relate to Free Goods/Pricing???
Does the table KOTN521 exist in the ABAP Dictionary?
Answering these questions may get you closer to the answer.
Can you compare the values in these entries to what you have in different SIDs?
Is this problem happening in Production, or is it still in a development or Quality Assurance client?
If it is still in development or Q, then it may be that a recent customization change was made.
Compare the entries across your systems, if possible.
Good luck
Brian

Error while saving after changing the date of a parked invoice document in MIR7

DUPREC:POS&INCOMINGINVOICE&(Invoice Number)(Fiscal Year)
Message no. CD328

Hi,
Hope you are getting the dump Please check this note 1687903 - MIR4: Dump while saving parked invoice
also check the dump at ST21 for the ABAP statement whare it is getting an issue and rectify the same .
Regards,

PSC 2510 - Wireless setup - "Error while saving the settings to the device."

While trying to setup my PSC 2510 to be wireless I get an error message "Error while saving the settings to the device.". This comes after selecting connecting Through Network, selecting printer device, selecting WEP, entering key, and clicking next.
PSC 2510
Windows Vista
Using latest sfotware from HP to install
Thanks
Dennis
This question was solved.
View Solution.

ISSUE RESOLVED .. based on responce from PrintDoc to penn (refrence topic "C4385 Printer - Netgear DGN2000 - wireless setup".
PrintDoc responce helped me find my problem (to reset network settings on the printer to factory) even though diffrent printer.
Thanks

Error while saving the documents in Transactions MIRO,VA02, VA01, ects

Hi SAP Gurus,
i am geting an popup error while saving or after changing the documents in MIRO VA01, VA02 transactions..
The error is * " Condition Table Missing : Access JST1 60 ( Pricing Taxes ) " *
can u please help me out.
Regards
Kumar m

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

Automatic Picking giving error while saving the Delivery

Hi
We have done the configuration for doing automatic picking while saving the delivery.
Steps done are
1. TCode V/38
2. TCode OVLT where we have changed the Time value form 3 to 4 for Send Immediate
3. TCode VP01SHP where all shipping points are maintained.
we are getting the following error while saving the delivery.

Execute ST22 and go through the explanation given under the tab "Error analysis" and "How to correct the error". Ask your ABAP team to look into this if you are not able to find out the root cause of the issue.
G. Lakshmipathi

Unknown Error while saving the query to My Portfolio

Hi,
We have a report published on the portal and users are accesing these reports completely through portal. After running the report user is trying to save the report to My Portfolio on the portal and it is giving an error as "Unknown Error". Anybody who faced this particular error, please give your suggestion.
Regards
Vijay

Hi Mike,
Please follow the following steps to resolve the issue:
a. Identify the list of users who are getting the unknown error while saving to My Portfolio
b. Provide a role called COM.SAP.IP.BI.Business_Explorer_Showcase
c. Once the role is provided to the users, they will get a new tab called Business Explorer in the portal and ask them to click on that tab and then click on My Portfolio button in the subsequent screens
d. Once the user clicks the My Portfolio tab this will create the KM folders in the backend for the users to save the report at the run time
e. Once this is done, ask the user to log off and log in again in to the portal
f. There after users will be able to save the queries to My Portfolio
g. Once this is resolved ask the security team to remove the COM.SAP.IP.BI.Business_Explorer_Showcase role (this role need not be given for a long time).Points.
Regards
Vijay

Error while saving the same model in the

Similar Messages

Maybe you are looking for