Error while saving user Query

I am generating a simle query from query generator, and trying to save it, it gives the following error message
"To generate this document first define the numbering series in the Administration module"
I am using SAP 2007 B PL 00

Hi!
This is the Authorization Pblm for the particular user in SAP B1.
Try to give Full Authorization to
Query Generator under
Administration > System initialization > Authorization > General Autho > Reports > Query Generator
To give this, u should log in as a super user in sap b1.

Similar Messages

Getting Brain Error while saving the query--Need Immediate solution

Hello Experte
I designed query like this.
G/L account structure is defined in Rows. Before explaining about columns Let me Explain u about my ORG structure.
Company codes are defined in R/3 like this.
Company Code
1000 for Local Currency(HSL01)
2000 to 7000,IEL for group Currency(KSL01).
Iu2019m extracting the data as it is from R/3 to DSO and again by writing routine I splitter the data for months(EX: HSL01 is ApriL,Hsl02 May,u2026u2026u2026u2026u2026u2026.KSL01 April, KSL02 may,u2026u2026u2026. Upto to 16 periods) this is R/3 data. This data I differentiated based upon currency types. If currency type is 10 then Local Currency 30 Means Group Currency.
Again Iu2019m receiving the data from Flat Files for subsidiaries(IEAI,IEG,IEEL,ISSCI,IHAL,TTM-US,TTM-INDIA,TTIT). This data I loaded first into DSO by writing Routine at field Level for G/L account to convert G/L Descriptions into Numbers.
After that I loaded data from first DSO to Second DSO by writing to convert respective currencies into INR and again loaded to cube by Direct mapping.
Again Iu2019m receiving the eliminations data from R/3 through Ztable. This also Iu2019m extracting from R/3 and loaded into dso and again into cube.
Now I will Explain about my Report.
In Columns I defined 3 selections for each month. U can observe that in Document. Like that for each month Iu2019m getting three selections and for subsidiaries 2 selections for each month. If we observe total Iu2019m getting 13 selections for India and 9 selections for each subsidiary. If subsidiaries increase I need to increase selections, automatically columns will increase. Now for Q4 2 new subsidiaries are added I need to added. After adding and while saving the query then only Iu2019m getting brain error.
Could any one sort out this.
Thanks,
Sony

HI Ravi,
Thanks for the reply.
While saving the query in BEX i'm getting this error.
Diagnosis
Query ZQ3_MISGRPSUMMARYREPORT_010209 contains 8192 differing selection cells. However, only 8191 selection cells can be processed in a query.
Procedure
Please simplify query definition ZQ3_MISGRPSUMMARYREPORT_010209.
This was the error i'm getting. How to simplify this....
Any answers please.
Thanks,
Sony

Unknown Error while saving the query to My Portfolio

Hi,
We have a report published on the portal and users are accesing these reports completely through portal. After running the report user is trying to save the report to My Portfolio on the portal and it is giving an error as "Unknown Error". Anybody who faced this particular error, please give your suggestion.
Regards
Vijay

Hi Mike,
Please follow the following steps to resolve the issue:
a. Identify the list of users who are getting the unknown error while saving to My Portfolio
b. Provide a role called COM.SAP.IP.BI.Business_Explorer_Showcase
c. Once the role is provided to the users, they will get a new tab called Business Explorer in the portal and ask them to click on that tab and then click on My Portfolio button in the subsequent screens
d. Once the user clicks the My Portfolio tab this will create the KM folders in the backend for the users to save the report at the run time
e. Once this is done, ask the user to log off and log in again in to the portal
f. There after users will be able to save the queries to My Portfolio
g. Once this is resolved ask the security team to remove the COM.SAP.IP.BI.Business_Explorer_Showcase role (this role need not be given for a long time).Points.
Regards
Vijay

Errors while saving the query

We are getting the following errors after saving the query:
1)The system tried to insert a data record, even though a data record with the same primary key already exists 0
2)An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause 0
3)Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION 0.
Not able to save the changes in Query also.
Always welcome for any ideas please...
Thanks in advance.
Bala

Hi,
Please apply the corrections from Note 1015402 using SNOTE transaction.
Regards,
Selva

Error while saving the query A299 Urgent

I had created a Query on Multi provider and when i am making changes to it while creating and saving the same it is giving me a error "[A299(BRAIN)] Terminate:System error in program Cl_RSD_MULTIPROV and the form GET_PART_iOBJNM_CMP-01 "
Please Help in resolving the same thanks.\

Hello Sreekanth,
Generally this error is due to inconsistency in Multiprovider. Could you please do a dummy change for this
multiprovider and re-activate it.
This will resolve your issue,
Regards,
Arvind

Datatype : 25 not supported error while saving Logical Query in BIP Dataset

Hi All,
I have created a nested logical Query in OBIEE Publisher Datamodel using parameters.
Here is the simple query :
Select name, revenue, date from
select "SubjectAreaName"."TableName"."Name" name,
case when :Date > date '2012-01-01' then "SubjectAreaName"."TableName"."Revenue" else NULL end Revenue,
date date
from
"SubjectAreaName"
where
date = :Date
) T1
Note - :Date is the parameter. When I try saving this dataset as-is, it throws me Datatype : 25 not supported error. But, when i replace the parameter :Date with actual date, then the query works. Also, the inner query works with or without parameters. The issue arises when I use the outer query and the parameters.
Please let me know if you have come across such a problem ?
Any help on this regard would be highly appreciated.
Thanks
Swarna

ya i can understand we wont do the sql logic at the data model part as some time performance issue may come when comparaed to sql run in package and sql running in data model . so i have mostly done using package and i will just do select * from table in the data set of data model so i didn't face any issue's like this .
once check this tutorial may be you already
i use to create parameters like this i didn't face any issue
SELECT * from TEST where ID=:p_id
http://st-curriculum.oracle.com/obe/fmw/bi/bip/bip11g/gettingstarted/gettingstarted.htm

Error While Saving a Query in Bex

Hi All,
When I am trying to Save a query Its throwing me this error.
"An unexpected 'object variable or with block variable not set' error occured in wdbrlog."
Any pointers would be helpful.
Regards,
Mayank

Hi Manyank,
Are you using any variables, if so, please check the variables are built right manner.
Check on the Text variables also, if you are using
Regards,
Ravi Kanth

Error While Saving a query

Hi All,
When I am trying to Save a query Its throwing me this error.
"An unexpected 'object variable or with block variable not set' error occured in wdbrlog."
Any pointers would be helpful.
Regards,
Mayank

Hi Mayank,
Please check this thread..
'object variable or with block variable not set
Might help you..!!
-Pradnya

ERROR While Saving the Query

Hi
I am trying to save a a query, as YP_XXXXXXXXXX. it is giving me an error "Namespace /BIC/ must be set to changable". would anyone be able to help me out with the same
Regards
M

Hi This has been solved.
We needed to change the Object type"Query Element" to "Changeable Original". This solved our problem. there is also a realted note 337950 that can help in similar kind of problems.
Thought of sharing it with you all.
Regards
M

Error while saving Bex Query

Hi all
I created a Global RKF in Query desinger and when i click on Save button, it is throwing error
[Query name] contains errors do you want to save anyway?
why i am not able to create RKF, If i delete that RKF and click SAVE its working fine, but if I create a Global RKF it's throwing error.
What i Did is I select the option No, and tried to create again the same RKF with same Technical name then it says already RKF exists but i dont see that in any other query's too, then i logout and once again login and tried with same technical name and same RKF then it worked but for only one RKF, when i create another RKF and save query same error is showing up.
Did any one face this issue before?
Thanks

In SAP we can't create any of the objects with the same Technical name, but you can create the objects with same description with different Technical names...
You might have checked the Description which is same for the other RKF you are referring too...
Why you want to create the RKF with the same name? why don't you make use of already existing one?
If you are not able to find it ,,some body might have created and later they had deleted it. but the entry is still there in the tables.
Give a try and check out your self...

Error while saving a query view

Hi All,
I am trying to save a query view in my favourites and it is failing with below message:
Namespace '/BIC/' must be set to 'changeable' (transaction SE06)
I have created many query view so far, this issue has just started. Could you please help us with this, as it is very urgent.
Thanks and regards,
Shashidhar.

Hi,
Please set the setting as described in note 337950, it will help to fix the issue.
solution:
Releasing the object changeability
This setting is only intended for production or test systems that are
set to not changeable. It is not suitable for development systems. For
this reason, this setting is only effective if at least one of the
conditions specified under 'Cause and prerequisites' is met.
Go to the Administrator Workbench (Data Warehousing Workbench,
transaction RSA1) -> 'Goto' -> 'Transport Connection' and choose 'Object
Changeability'. To display the function, you may have to enlarge the
window or press the arrow keys nearby.
In the following dialog box you can select the object types that you
want to be changeable, even though the system is set to not changeable.
These objects are not connected to the transport system; this means that
no transport dialog boxes are displayed. This only applies, however, if
the preconditions mentioned under 'Cause and prerequisites' are met.
First, after releasing an object type, only objects that are original,
that is, those that were created in this system can be changed. This
prevents changes to objects that were imported into the system. However,
changes to these objects may be overwritten again during a new
transport.
You can set all objects to changeable (even the ones imported into the
system) using the context menu (right mouse button), although this
setting is not recommended for the reasons mentioned above.
Thanks,
Venkat

Error while saving user customizations

I am getting following error when trying to hit "Apply" from portlet customization page. It is a jpdk portlet:
[27/05/2003 14:02:30:839 CDT] page/Unexpected exception in servlet
java.lang.NullPointerException
at oracle.webdb.page.DataProcessor308.generatePage(Compiled Code)
at oracle.webdb.page.DataProcessor308.process(DataProcessor308.java:3085)
at oracle.webdb.page.PageBuilder.process(PageBuilder.java:804)
at oracle.webdb.page.ParallelServlet.doGet(ParallelServlet.java:98)
at oracle.webdb.page.ParallelServlet.doPost(ParallelServlet.java:149)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:521)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at org.apache.jserv.JServConnection.processRequest(Compiled Code)
at org.apache.jserv.JServConnection.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
how do I know where the null exception is coming from.

Vikas,
From the stack trace, it seems that this error is coming from the Parallel Page Engine (PPE) & not from the provider midtier where your portlet code is residing. However, to be sure just open up the application.log file under application-deployments/portletContextRoot/application.log & see the stack trace.
btw, whats your portlet behavior on clicking "APPLY" or "OK" from the customize mode?
Regards,
Abhinav

Error while saving query

While saving any query in the system i receive an error:
First define the numbering series in administration module.
I have licence but the PL is 0. Is this the reason?
Plz solve it.
thanks

hi
Did you Set the current Posting Period on General Settings?
Did you assign the Period Indication is the same Selected for the Posting Period?
Else,
You did not select Full Authorization for Document Numbering Series in the Authorization Window for USER code you are using.
The problem caused by Series 1 until last Series is set to No Authorization.
Regards,
Madhan.

Error while saving record "User:johndoe": Error -14071

I have added my augmented users from the AD server. When I select user and to apply a setting under Preferences I get this on attempting an "Apply", Error while saving record "User:johndoe":Error -14071. I'm authenticating to my LDAP not AD/All Domains.
I have the server bound correctly to the AD server. Bound to AD, then promoted to OD master.
Tried WGM from another Mac, same error.
I recall my AD admin extending the ad schema last year for OS X 10.4.
Thoughts? Thanks.

Thanks David and Mabel, and all for the suggestions. I did go through "Leveraging Active..." prior to posting. I did try your method of canceling the authorization to WGM and viewing Directories. I would select a user from this method and try to apply something from MCX, but still got the -14070 error. Yes, I do have my client bound 1st OD, 2nd AD, with OD first on the search policy for the client.
I though I had solved my issue by authenticating to WGM and LDAP. Then selecting Groups and the Members tab, I define an OD group and select that group. I can then click the "+" towards the right of the window. Then select my AD there which populates. I can add my AD groups or single users to my OD group. Then I'm able to apply MCX settings. But, no "blue" circle next to the group's silhouette. How is my method possibly incorrect?
Also, at some point I unbound my client from AD and it seems the client is ok with getting AD info off my OD server. Example, my AD sharepoint mounts for PHD.
But, I do have a pause of 20 secs. are more when logging into the client as well as accessing applications. Side effect of my method?

Error while saving workbook or query

Hi guys. After upgrade to 7.0 we are experiencing error while saving workbook or query.
We are using BEx 3.5.
Here is the error:
"Program error in class SAPMSSY1 method: UNCAUGHT_EXEPTION.
An exeption with the type CX_SY_PROGRAM_NOT_FOUND occured, but was neighter handled locally, nor declared in a RAISING clause.
Program CP9QUC052Y8TXQ0C2TM5KB0T92K does not exist"
What can be the cause of this error?

Hi Jose!
It was easy.
The problem can be solved by reactivating the personalization
for the BEx.
To reactivate the personilization go to transaction SPRO and navigate:
SAP Reference IMG -> SAP Customizing Implementation Guide -> SAP
NetWeaver -> Business Intelligence -> Settings for Reporting and
Analysis -> General Settings for Reportiung and Analysis
or
open the transaction RS_PERS_ACTIVATE
Check all boxes and execute.
Hope it helps.
Vad.

Error while saving user Query

Similar Messages

Maybe you are looking for