Error while scheduling data collector: Error adding routine 'SAPTOOLS.DBH_FWK_CLEANUP' to task scheduler

Error Detail
Exception CX_DBA_ADBC in program RAGS_SISE_ACTIVITY_JOB line 0
Kernel Error ID:
WP ID: 23
WP PID: 28977
SYSID: CR5
SY-SUBRC: 0
SQL statement:
Database: CR5
caused by
Exception CX_SQL_EXCEPTION in class CL_SQL_STATEMENT
Kernel Error ID:
DB Error: Yes
SQL Code: 444-
SQL Message: SQL0444N Routine "*TASK_ADD" (specific name "SQL140704080729140") is implemented with code in library or path "...ib/function/SYSPROC.ADMIN_TASK_ADD", function "*" which cannot be accessed. Reason code: "4". SQLSTATE=42724 row=1
DB Object Exists: No
Duplicated Key: No
Internal Error: 1
Invalid Cursor: No
Unknown Connection: No
Connection Closed: No
System Detail:
Solman 7.1
ST    710    0010    SAPKITL710    SAP Solution Manager Tool
SAP_BASIS    702    0013    SAPKB70213    SAP Basis Component
Managed system:
SAP CRM ABAP 7.0
SAP_BASIS    701    0005    SAPKB70105    SAP Basis Component
SAP_ABA    701    0005    SAPKA70105    Cross-Application Component
PI_BASIS    701    0005    SAPK-70105INPIBASIS    Basis Plug-In
ST-PI    2008_1_700    0008    SAPKITLRD8    SAP Solution Tools Plug-In
CRMLOY    700    0005    SAPK-70005INCRMLOY    CRM Loyalty Management 700
SAP_BS_FND    701    0005    SAPK-70105INSAPBSFND    SAP Business Suite Foundation
SAP_BW    701    0005    SAPKW70105    SAP Business Warehouse
LCAPPS    2005_700    0007    SAPKIBHD07    LC Applications (LCAPPS) 2005_700
Database DB2
db2level
DB21085I Instance "db2cr5" uses "64" bits and DB2 code release "SQL09016" with
level identifier "01070107".
Informational tokens are "DB2 v9.1.0.6", "s081007", "U817474", and Fix Pack
"6".
Activity detail:
We are performing managed system configuration for CRM into Solman by using solman_setup transaction. While performing the Database Extractor Setup in step 8 we have observed above error.
Action take at our end:
1. Clean the LMDB and restart the configuration. - no luck
2. Upgrade the hostagent at CRM - No luck
3. Update the SLD for CRM entry - no luck
4. implemented SAP notes:
875986    Note Assistant: Important notes for SAP_BASIS up to 702
1246964    Note Assistant: Master language of notes incorrect
1262653    SPAU: New object is deleted after note is reset
1309424    DB6: DBA Cockpit Correction Collection SAP Basis 7.01 / 7.11
1335017    DB6:"Remove Redundant Restrictions" can return wrong results
1349277    Note Assistant: Method cannot be implemented
1365677    Note Assistant: Runtime error MOVE_CAST_ERROR during implmtn
1372652    DB6: Short dump when viewing diaglog due to NULL bytes
1373957    DB6: CX_SY_CONVERSION_OVERFLOW in new EXPLAIN
1376543    DB6: OPTIONS parameters for backup jobs in DB13
1378499    DB6: CLI error CLI0112E with "REORGCK_ALL" job
1379260    DB6: Add BW query name as comment to SQL statements
1379346    DB6: Scheduling of data collectors fails
1381179    DB6: Incorrect values for 'number of objects in tablespace'
1382634    DB6: Unable to create view 'SAPTOOLS.DBH_TABCLASS'
1382996    DB6: Update of DPW Back-End in Monitored DBs does not work
1384238    DB6: Defect scheduler on DB2 9.1 FP7/FP8 for LUW on Linux
1387022    DBA Cockpit: Month displayed incorrectly in DB13C
1387297    DB6: SQL-Fehler 901 during RUNSTATS and REORGCHK
1397709    Ignore Dynpro element fields AGLT and ADEZ in SNOTE/CWB
1398258    DB6: Job REORGCK_ALL places load on package cache
1400843    DB6: Incorrect display of key fields in EXPLAIN
1412719    SNOTE: error when implementing enhancement implementations
1413008    DB6: SQL0206N in function module DB6_PM_LOCKSNAP
1414624    DB6: Performance views if database monitors are deactivated
1414626    DB6: Incorrect display of file system sizes of containers
1415680    Note Assistant: Incorrect status in subsequent systems
1421157    DB6: SQL error 204 when accessing table DBSTATC
1425487    SE24: Error regarding READ-ONLY for complex attributes
1426092    DB6: Incorrect DROPPED TABLE clause for tablespaces
1426480    DB2: Incorrect display of registry values for DPF systems
1427030    DB6: Container specifications for tablespaces not changeable
1429082    DB6: No REORG after deactivating compression
1429687    DB6: SQL cache performance
1438168    DB6: REORGCHK recommendations for indexes are missing
1444373    DB6: Loading the package cache with monitor functions
1449482    DB6: Error message 'Command LIST_DB2DUMP failed'
1451958    DBA Cockpit: Incorrect start time for jobs
1452197    DB6: SQL error 100 in job REORGCK_ALL
1452502    DBA Cockpit: Jobs are missing in central planning calendar
1455897    DB6: Display of data classes is not updated
1456379    DB6: No display of indexes in data classes
1460895    DB6: SQL0104N during creation of WLM threshold
1462415    DB6: SQL -444 error messages in system log
1462855    DB6: Incorrect database name in HA environment
1464800    DB6: SQL Commands executes automatically on system change
1464858    DB6: COMPUTE_BCD_OVERFLOW during EXPLAIN Test Execute
1469515    DB6: Runtime error GETWA_NOT_ASSIGNED_RANGE in SAPLSDB6MON
1485313    DBA Cockpit: Incomplete system entries after SLD import
1486972    DB6: Parameters for DB/DBM configuration cannot be changed
1489968    DBA: DBA Cockpit WebDynpro does not care about HTTPURLLOC
1496515    DB6: SQL error 1428N when starting the DBA Cockpit
1501130    DB6: SQL error 802 in DB6_DIAG_COUNT_TABLE_ENTRIES
1508074    RZ20: 'Connection' attribute does not report alerts
1509121    DBA Cockpit: Endless loop occurs when starting DBA Cockpit
1511803    DB6: DB_TABLE_DATA_READ does not return data
1521525    DB6: Table display is not sorted
1522617    DB6: Availability of BW-specific functions in DBA Cockpit
1532114    DB6: Too many locks when collecting table history
1536787    DBA Cockpit: WebDynpro Explain - LOADDATA requires a model
1542311    DB6: Runtime error BCD_OVERFLOW in auto maintenance display
1546866    DB6: Runstats_DBSTATC interprets runtime param. incorrectly
1551729    DB6: Incorrect number of key fields in EXPLAIN
1552812    DB6: Use of db2sap functions
1559699    DB6: Missing data in SQL cache display
1559967    DB6: SQL error 206 when collecting the table history
1563327    DB6: SQL error SQL0551N when accessing SYSSTAT.TABLES
1568800    DB6: Error when deleting alert messages
1569592    DB6: SQL error SQL0433N in EXPLAIN
1569669    DB6: Incomplete history for performance data
1571365    DB6: SQL error SQL0443N in alert monitoring of DPF system
1576094    DB6: Database error SQL1751N in partitioning wizard
1597281    DB6: Incorrect compression displays for tables
1599764    DB6: SQL error 1428 when calling transaction SM50
1602403    DB6: No VOLATILE attribute after RUNSTATS or REORG job
1613270    DB6: Runtime error DYNPRO_FIELD_CONVERSION in DBA cockpit
1615698    DBA Cockpit: Incorrect date selection in DB13C
1619084    DBA Cockpit: Runtime err MESSAGE_TYPE_X when alert displayed
1619636    DBA Cockpit: Daily scheduling is not deleted
1624436    DBA Cockpit: Errors when accessing SHM area CL_DBA_SHM_AREA
1639631    DBA Cockpit: Failed schedulings in DB13
1720495    Invalid deimplementation of obsolete notes by Snote tool
Kindly suggest the correct solution to fix the issue.

Dear Deepak
Thanks for quick response.
Note 1462415 - DB6: SQL -444 error messages in system log ( SAP_BW 701 SP7 suggested)
This is already implemented and updated in my 1st message.
Note 978319 - DB6: Incorrectly cataloged table functions
This note can not be implemented due to version issue.
Kindly suggest some more hints on top of what I already did.
Regards
Bipin

Similar Messages

Invalid character error while activating data in DSO.

Hi Experts,
We are facing an issue with presence of invalid characters in data from source. This throws SID generation error while activating data in DSO. Long text of error shows like this:
"Value " ĠĠĠĠĠĠĠĠĠĠĠĠĠĠĠ" (HEX 000D0120012001200120012001200120012001200120012001) of characteristic contains an error at position 1"
Also we've tried adding the character " Ġ " in TCode RSKC, but it then shows as a rectangle box which I'm not able to copy manually(looks like a blank space or something of that sort).
We've tried implementing routine to remove special characters while loading data, but still it fails. Due to huge amounts of data, its practically unfeasible to check each record manually.
Any useful suggestions will be acknowledged.
regards,
anoop

Hi,
We are using following code for the same purpose. U can use it at infoobject level mapping. This code will check value of each character in the data coming, whether it is in RSKC, if it is a allowed one then it will be passed as it is. Otherwise it will replace that character by space.
    data: l_d_length like sy-index,
             l_d_char type c,
             l_d_index type sy-index,
          l oopx like sy-tabix.
    data : xinfobj(30) type c value 'RABC'.    -> this is ur infoobject name
    clear : result.
    call function 'CONVERSION_EXIT_ALPHA_INPUT'
      exporting
        input = tran_strucutre-XYZ     -> object name in ur structure
      importing
        output = result.
    l_d_length = strlen( result ).
    do l_d_length times.
      l_d_index = sy-index - 1.
      l_d_char = result+l_d_index(1).
      call function 'RSKC_CHAVL_OF_IOBJ_CHECK'
        exporting
          i_chavl                 = l_d_char
          i_iobjnm                = xinfobj
    I_S_COB_PRO             =
    I_T_COB_PRO_CMP         =
       exceptions
         chavl_not_allowed       = 1
         others                  = 2
      if sy-subrc <> 0.
        result+l_d_index(1) = ' '.
      endif.
    enddo.
Regards;
Jitendra

Error while copying data from infoprovider to planning area

Hi,
Error for COM routine using application program (return code 40,075)
Message no. /SAPAPO/OM102
Diagnosis
An application program has called a COM routine. During the process, an error occurred.
I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
How to resolve this?

Hi,
Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
Below are the programs for the same.
/SAPAPO/TS_lcm_cons_check
/SAPAPO/TS_PSTRU_TOOL
/SAPAPO/TS_PSTRU_CONS_CHECK
Regards
Kishore

Error while loading data from a file on application server

Hi all,
Facing an error while loading data from a flat file.
Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
Can you please tell me what could be the problem?
Thank you all,
Praveen

Hi all,
As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
10/21/2006 5:11:48 AM which i need to change to 10/21/2006
one more note is i have some of the fields as NULL in this field
Last Updated Date
10/21/2006 5:11:48 AM
10/21/2006 5:11:48 AM
NULL
NULL
10/21/2006 5:11:48 AM
NULL
I want to display the values as 10/21/2006 and NULL as it is.
Please let me know if we have a conversion routine in datasource which can solve my problem.
Regards,
Praveen

Error while loading data to ODS

Hello BW folks ,
I am getting an error while loading data to ODS from R/3 data source.
The error message is " Error in PSA".
We have deleted yesterday data from PSA for the related infosource/data source successfully .
Since then this error is occuring. Previously data upload was successful.
In Detail tab of monitor we are getting error message in Request option ( red Mark )
and the same request is not going to R/3 .
<b>The related Job itself is not present in R/3 .</b>
This looks very strange and new to me .
Could anyone help me in rectifying this issue ?
Thanks in Advance.
Best Regards ,
Amol.

Hello All,
Thanks for reply.
I tried to replicate the data source once again and activate the transfer rules in BW Production by running program in SE38 = RS_TRANS* activate all tranfer sturctures , then I got an error message that one infoobject is added to transfer rules in BW Production .
But interestingly the same Transfer rules do not have this infoobject in BW Development server . So I create once again a request for Transfer rules in Dev and transported it to BW production.
and This solved the problem
The error message in Monitor was " Error in PSA " and then request itself was not going to R/3 . But the real issue was with Transfer rules. So after rectifying it we have solved the problem of data upload.
Best Regards ,
Amol Kulkarni.

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

'Error while signing data-Private key or certificate of signer not availabl

Hello All,
In my message mapping I need to call a web service to which I need to send a field value consist of SIGNED DATA.
I am using SAP SSF API to read the certificate stored in NWA and Signing the Data as explained in
http://help.sap.com/saphelp_nw04/helpdata/en/a4/d0201854fb6a4cb9545892b49d4851/frameset.htm,
when I have tested using Test tab of message mapping it is working fine and I am able to access the certificate Keystore of NWA(we have created a keystore view and keystore entry to store the certificate) and generate the signed data ,but when I test end to end scenario from ECC system,it is getting failed in mapping with the error
' Error while signing data - Private key or certificate of signer not availableu2019.
Appreciate your expert help to resolve this issue urgently please.
Regards,
Shivkumar

Hi Shivkuar,
Could you please let me know how you were trying to achieve the XML signature.
We have a requirement where we have to sign the XML document and need to generate the target document as following structure.
<Signature>
     <SignedInfo>
         <CanonicalizationMethod />
         <SignatureMethod />
         <Reference>
                 <Transforms>
                 <DigestMethod>
                 <DigestValue>
         </Reference>
    <Reference /> etc.
</SignedInfo>
<SignatureValue />
<KeyInfo />
<Object>ACTUAL PAYLOAD</Object>
</Signature>
I am analyzing the possibility of using the approach that is given in the help sap link that you have posted above. Any inputs will be apprecited.
Thanks and Regards,
Sami.

Error while saving date value in Java dictionary

Hello Everybody,
I got following error while saving date value in one of the fields of the Java table.
Internal error occured in submit request: Error in method updateRequestContact : The object of type java.sql.Date with the value '2005-12-04 08:00:00.0' assigned to host variable 9 is not normalized. It must not contain time components in the time zone running the virtual machine.
I can't find why it is taking time value in the date object.
This value is coming from the RFC as a date value, and I am saving this value in Java dictionary table.
Same code for this was working fine earlier. But, now suddenly it gives error like this.
Even if I provide date on the screen from webdynpro application, this date value can't save in the Java dictionary and gives same error.
What should be the problem behind this?
Regards,
Bhavik

Hi Satyajit,
I am getting date value from the screen of the webdynpro application from date picker control and passing this value in Java dictionary.
More Information:
I have dat value in the Date object: <b>target_date</b>
But Now I have made new Date object as following:
Date target_Date1 = new Date(target_date.getYear(),target_date.getMonth(),target_date.getDate());
Then I am passing this object to Java dictionary. Still it gives same error.
Then I have changed code as following:
          int l_year;
          int l_month;
          int l_days;
          l_year = target_Date.getYear();
          l_month = target_Date.getMonth();
          l_days = target_Date.getDate();
     Date target_Date1 = new Date(l_year,l_month,l_days);
Now it works for me.
But I guess this is not the perment solution. It looks very strange. I have used so many date objects at various palces. So, this solution is not the final for me.
I want to findout the main cause of it.
One more thing: This code was working for a mornth or two. But, now suddenly it is giving this error.
Please help me if anybody knows.
Regards,
Bhavik

Error while generating Data provider

We are facing a weird issue while using Design Studio 1.2. Locally the tool works fine but when we use it from BI-Launchpad or through BI Enterprise it gives intermittent error "Error while generating Data Provider"
Same setup works fine in our Validation Environment.
We have tried running repair for Design Studio, redeploy the war files, creating new view but issue still exist.
We have BI 4.0 SP7 installed on Windows 2008 R2 system.
4 CMS running in cluster, Design Studio 1.2 is installed on 3 Nodes out of 4.
For now we are using 1 tomcat to access the system to narrow down the issue.
Experts please help us to resolve this issue.
Attach is the error message we are receiving

I am not clear what your data source is, but I recommend checking the PAM https://websmp102.sap-ag.de/~sapidb/011000358700001013822013E because there are some limitations with Design Studio and BI4.0

Error while selecting date from external table

Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2        SE_CUST_ID NUMBER(38),
3        SE_TRAN_AMT_LCY FLOAT(126),
4        SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6    TYPE ORACLE_LOADER
7    DEFAULT DIRECTORY ext_tables
8    ACCESS PARAMETERS (
9      RECORDS DELIMITED BY NEWLINE
10      FIELDS TERMINATED BY ','
11      MISSING FIELD VALUES ARE NULL
12      (
13        country_code      CHAR(5),
14        country_name      CHAR(50),
15        country_language CHAR(50)
16      )
17    )
18    LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19

It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell --

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Error While entering data in VA01

Hi,
I get the following error while entering data for "Plant" in Sales order creation (VA01). Can anyone please tell me how to solve this problem.
Runtime Errors SAPSQL_INVALID_TABLENAME
Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time 27.04.2009 12:57:13
Short dump has not been completely stored (too big)
Short text
A table name, specified in an SQL command, is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An invalid table name "A996" was specified in an Open SQL command:
Due to one of the following reasons, the error occurs only at runtime:
- the table name was specified dynamically, or
- the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
ORDER-BY clause was specified dynamically.
Missing RAISING Clause in Interface
Program SAPLV61Z
Include LV61ZU01
Row 260
Module type (FORM)
Module Name SEL_KONDTAB
Trigger Location of Exception
Program SAPLV61Z
Include LV61ZU01
Row 724
Module type (FORM)
Module Name SEL_KONDTAB
Source Code Extract
Line SourceCde
694 and kschl = se_kschl
695 and datbi >= se_date
696 and datab <= se_date
697 and (coding_tab).
698 endif.
699 endif.
700 else.
701 if t681-ksdat is initial.
702 if not <entrytab> is assigned.
703 select * from (t681-kotab) appending table <cond_tab>
704 where kappl = se_kappl
705 and kschl = se_kschl
706 and (coding_tab).
707 else.
708 select * from (t681-kotab) appending table <cond_tab>
709 for all entries in <entrytab>
710 where kappl = se_kappl
711 and kschl = se_kschl
712 and (coding_tab).
713 endif.
714 h_subrc = sy-subrc.
715 if select_split ne 0.
716 modify coding_tab from coding_alter index select_split.
717 select * from (t681-kotab) appending table <cond_tab>
718 where kappl = se_kappl
719 and kschl = se_kschl
720 and (coding_tab).
721 endif.
722 else.
723 if not <entrytab> is assigned.
>>>>> select * from (t681-kotab) appending table <cond_tab>
725 where kappl = se_kappl
726 and kschl = se_kschl
727 and datbi >= se_date
728 and datab <= se_date
729 and (coding_tab).
730 else.
731 select * from (t681-kotab) appending table <cond_tab>
732 for all entries in <entrytab>
733 where kappl = se_kappl
734 and kschl = se_kschl
735 and datbi >= se_date
736 and datab <= se_date
737 and (coding_tab).
738 endif.
739 h_subrc = sy-subrc.
740 if select_split ne 0.
741 modify coding_tab from coding_alter index select_split.
742 select * from (t681-kotab) appending table <cond_tab>
743 where kappl = se_kappl
Thank you in advance....
Regards,
Sriram.

An invalid table name "A996" was specified
in an Open SQL command
Find out the transport request pertaining to Table A996 and ensure that both that request and the configuration request pertaining to that table are moved simultaneously.
thanks
G. Lakshmipathi

Error while creating data warehouse tables.

Hi,
I am getting an error while creating data warehouse tables.
I am using OBIA 7.9.5.
The contents of the generate_clt log are as below.
>>>>>>>>>>>>>>>>>>>>>>>>>>
Schema will be created from the following containers:
Oracle 11.5.10
Universal
Conflict(s) between containers:
Table Name : W_BOM_ITEM_FS
Column Name: INTEGRATION_ID.
The column properties that are different :[keyTypeCode]
Success!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
There are two rows in the DAC repository schema for the column and the table.
The w_etl_table_col.KEY_TYPE_CD value for DW application is UNKNOWN and for the ORA_11i application it is NULL.
Could this be the cause of the issue? If yes, why could the values be different and how to resolve this?
If not, then what could be the problem?
Any responses will be appreciated.
Thanks and regards,
Manoj.

Strange. The OBIA 7.9.5 Installation and Configuration Guide says the following:
4.3.4.3 Create ODBC Database Connections
Note: You must use the Oracle Merant ODBC driver to create the ODBC connections. The Oracle Merant ODBC driver is installed by the Oracle Business Intelligence Applications installer. Therefore, you will need to create the ODBC connections after you have run the Oracle Business Intelligence Applications installer and have installed the DAC Client.
Several other users are getting the same message creating DW tables.

Error While loading data for LIS InfoSources.

Hi All,
I am repeatedly receiving load failure errors while loading data using 2lis_01_s001 (This is the case with all the InfoSources).
The error message is:
An error occurred in the source system.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
in our Quality system, we disabled the LIS Updation to No Update(R3) and loaded data and then again changed the Update Mode for No Updating to Asynchronous Update(R3). But now we are doing dataloading in Production. How to proceed. Should we have to disable the LIS Updating whenever we have to load the loads from R3 to BW.
Regards
Jay

Hi Jayanthy,
Pls. check the order of the fields in the two set up tables for the S001 structure. The order of fields in both the tables should be the same.
You can see the structure in the TCode - SE11.
If the order is different, then you bneed to ask the BASIS person to change the order so that the order of fields in both the setup tables is same. This should fix the issue.
Thanks,
Raj

Error while scheduling data collector: Error adding routine 'SAPTOOLS.DBH_FWK_CLEANUP' to task scheduler

Similar Messages

Maybe you are looking for