Error while sending email via APEX
I get the following error message when trying to send an email to a WORKSPACE owner via APEX:
ORA-29279: SMTP permanent error: 501 Syntax error, parameters in command "MAIL FROM:" unrecognized or missing
This is very weird, when I go to the email queue the column "from" appears as empty and it should come from the email configured from "Administration Email Address".
Any help will be welcome,
Thanks.
post ur code plz
Similar Messages
-
Error while sending email to external mail - Urgent
Hi All,
I am getting error while sending email with attachement. The Error code is 02.
I am not able to identify the error. bold Please help me in solving this problem.
Is it anything wrong with the code or Any Configuration with SCOT/SOST.bold
the code i am using is :
REPORT YVR_F MESSAGE-ID XX .
TABLES : EDIDC, EDIDS, EDPAR.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS : P_STATUS LIKE EDIDC-STATUS DEFAULT '51'.
SELECT-OPTIONS : S_DIRECT FOR EDIDC-DIRECT,
S_MESTYP FOR EDIDC-MESTYP,
S_CREDAT FOR EDIDC-CREDAT.
SELECTION-SCREEN END OF BLOCK B1 .
PARAMETER: P_EMAIL LIKE SOMLRECI1-RECEIVER,
P_SENDER LIKE SOMLRECI1-RECEIVER no-display,
P_DELSPL AS CHECKBOX,
P_ONLINE NO-DISPLAY.
DATA : TB_EDIDC LIKE STANDARD TABLE OF EDIDC INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_EDPAR LIKE STANDARD TABLE OF EDPAR INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_KNA1 LIKE STANDARD TABLE OF KNA1 INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_ADRC LIKE STANDARD TABLE OF ADRC INITIAL SIZE 0 WITH HEADER
LINE.
DATA: INT_PDF TYPE TABLE OF TLINE WITH HEADER LINE.
DATA : BEGIN OF TB_ED OCCURS 0,
SNDPRN LIKE EDIDC-SNDPRN,
LOC LIKE ADRC-BUILDING,
DOCNUM LIKE EDIDC-DOCNUM,
IDOCTP LIKE EDIDC-IDOCTP,
MESTYP LIKE EDIDC-MESTYP,
DIRECT LIKE EDIDC-DIRECT,
CREDAT LIKE EDIDC-CREDAT,
STATUS LIKE EDIDC-STATUS,
END OF TB_ED.
DATA: IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
Job Runtime Parameters
DATA: GD_EVENTID LIKE TBTCM-EVENTID,
GD_EVENTPARM LIKE TBTCM-EVENTPARM,
GD_EXTERNAL_PROGRAM_ACTIVE LIKE TBTCM-XPGACTIVE,
GD_JOBCOUNT LIKE TBTCM-JOBCOUNT,
GD_JOBNAME LIKE TBTCM-JOBNAME,
GD_STEPCOUNT LIKE TBTCM-STEPCOUNT,
GD_ERROR TYPE SY-SUBRC,
GD_RECIEVER TYPE SY-SUBRC.
DATA: W_RECSIZE TYPE I,
W_SPOOL_NR LIKE SY-SPONO.
%_print LIKE pri_params.
DATA: GD_SUBJECT LIKE SODOCCHGI1-OBJ_DESCR,
IT_MESS_BOD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
IT_MESS_ATT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
GD_SENDER_TYPE LIKE SOEXTRECI1-ADR_TYP,
GD_ATTACHMENT_DESC TYPE SO_OBJ_NAM,
GD_ATTACHMENT_NAME TYPE SO_OBJ_DES.
Spool to PDF conversions
DATA: GD_SPOOL_NR LIKE TSP01-RQIDENT,
GD_DESTINATION LIKE RLGRAP-FILENAME,
GD_BYTECOUNT LIKE TST01-DSIZE,
GD_BUFFER TYPE STRING.
Binary store for PDF
DATA: BEGIN OF IT_PDF_OUTPUT OCCURS 0.
INCLUDE STRUCTURE TLINE.
DATA: END OF IT_PDF_OUTPUT.
DATA: GD_RECSIZE TYPE I.
CONSTANTS: C_DEV LIKE SY-SYSID VALUE 'DEV',
C_NO(1) TYPE C VALUE ' ',
C_DEVICE(4) TYPE C VALUE 'LOCL'.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1.
DATA : MSTR_PRINT_PARMS LIKE PRI_PARAMS,
MC_VALID,
P_REPID LIKE SY-REPID,
WF_ID LIKE TSP01-RQIDENT,
LOC_BYTECOUNT TYPE I.
*start-of-selection.
MSTR_PRINT_PARMS-PDEST = 'LOCL'.
P_REPID = SY-REPID.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
authority= ' '
COPIES = '1'
COVER_PAGE = SPACE
DATA_SET = SPACE
DEPARTMENT = SPACE
DESTINATION = 'LP01'
EXPIRATION = '1'
IMMEDIATELY = 'X'
LAYOUT = 'X_65_132'
MODE = SPACE
NEW_LIST_ID = 'X'
NO_DIALOG = 'X'
USER = SY-UNAME
IMPORTING
OUT_PARAMETERS = MSTR_PRINT_PARMS
VALID = MC_VALID
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4.
SUBMIT (P_REPID) TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS MSTR_PRINT_PARMS.
AND RETURN.
NEW-PAGE PRINT ON NO DIALOG PARAMETERS
MSTR_PRINT_PARMS.
perform data.
NEW-PAGE PRINT OFF. "This marks the end of the screen for which the
*SPOOL NO WAS GENERATED.
WF_ID = SY-SPONO.
*converting spool to pdf
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = WF_ID "SPOOL NUMBER
NO_DIALOG = SPACE
PDF_DESTINATION = 'X'
IMPORTING
PDF_BYTECOUNT =
LOC_BYTECOUNT "NUMBER OF BYTES TRANSFERRED
TABLES
PDF = INT_PDF "TABLE FOR PDF REPORT
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12.
*CALL FUNCTION 'DOWNLOAD'
*EXPORTING
*bin_filesize = loc_bytecount "NO. OF BYTES
*filename = 'C:/EMAILPDF.PDF'
*filetype = 'BIN'
**IMPORTING
**act_filename = loc_filename
*TABLES
*data_tab = int_pdf.
IF P_DELSPL EQ 'X'.
PERFORM DELETE_SPOOL.
ENDIF.
Transfer the 132-long strings to 255-long strings
LOOP AT INT_PDF.
TRANSLATE INT_PDF USING ' ~'.
CONCATENATE GD_BUFFER INT_PDF INTO GD_BUFFER.
ENDLOOP.
TRANSLATE GD_BUFFER USING '~ '.
DO.
IT_MESS_ATT = GD_BUFFER.
APPEND IT_MESS_ATT.
SHIFT GD_BUFFER LEFT BY 255 PLACES.
IF GD_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
DESCRIBE TABLE IT_MESS_ATT LINES GD_RECSIZE.
CHECK GD_RECSIZE > 0.
PERFORM SENDMAIL USING P_EMAIL..
*& Form sendmail
text
--> p1 text
<-- p2 text
FORM SENDMAIL USING P_EMAIL.
CHECK NOT ( P_EMAIL IS INITIAL ).
REFRESH IT_MESS_BOD.
Default subject matter
GD_SUBJECT = 'Subject'.
GD_ATTACHMENT_DESC = 'IDOC LIST'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
If no sender specified - default blank
IF P_SENDER EQ SPACE.
GD_SENDER_TYPE = SPACE.
ELSE.
GD_SENDER_TYPE = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESS_BOD
IT_MESS_ATT
USING P_EMAIL
'Document attachment'
'PDF'
GD_ATTACHMENT_NAME
GD_ATTACHMENT_DESC
P_SENDER
GD_SENDER_TYPE
CHANGING GD_ERROR
GD_RECIEVER.
ENDFORM. " sendmail
*& Form DELETE_SPOOL
text
--> p1 text
<-- p2 text
FORM DELETE_SPOOL.
DATA: LD_SPOOL_NR TYPE TSP01_SP0R-RQID_CHAR.
LD_SPOOL_NR = WF_ID. "GD_SPOOL_NR.
CHECK P_DELSPL <> C_NO.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
SPOOLID = LD_SPOOL_NR.
ENDFORM. " DELETE_SPOOL
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
text
-->P_IT_MESS_BOD text
-->P_IT_MESS_ATT text
-->P_P_EMAIL text
-->P_0846 text
-->P_0847 text
-->P_GD_ATTACHMENT_NAME text
-->P_GD_ATTACHMENT_DESC text
-->P_P_SENDER text
-->P_GD_SENDER_TYPE text
<--P_GD_ERROR text
<--P_GD_RECIEVER text
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = IT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = p_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
W_SENT_ALL = 'X'.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
object_header = objhead
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
IF SY-SUBRC NE 0.
MESSAGE E000 WITH 'Error occurred while sending'.
ELSE.
MESSAGE I000 WITH 'The document was sent'.
ENDIF.
ENDFORM. " SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form data
text
--> p1 text
<-- p2 text
FORM data.
SELECT SNDPRN
DOCNUM
IDOCTP
MESTYP
DIRECT
CREDAT
STATUS
FROM EDIDC
INTO CORRESPONDING FIELDS
OF TABLE TB_EDIDC
WHERE STATUS = P_STATUS
AND MESTYP IN S_MESTYP
AND DIRECT IN S_DIRECT
AND CREDAT IN S_CREDAT.
SELECT KUNNR
INPNR
FROM EDPAR
INTO CORRESPONDING FIELDS
OF TABLE TB_EDPAR
FOR ALL ENTRIES IN TB_EDIDC
WHERE KUNNR = TB_EDIDC-SNDPRN.
SELECT KUNNR
ADRNR
FROM KNA1
INTO CORRESPONDING FIELDS
OF TABLE TB_KNA1
FOR ALL ENTRIES IN TB_EDPAR
WHERE KUNNR = TB_EDPAR-INPNR.
SELECT ADDRNUMBER
BUILDING
FROM ADRC
INTO CORRESPONDING FIELDS
OF TABLE TB_ADRC
FOR ALL ENTRIES IN TB_KNA1
WHERE ADDRNUMBER = TB_KNA1-ADRNR.
LOOP AT TB_EDIDC WHERE STATUS = P_STATUS
AND MESTYP IN S_MESTYP
AND DIRECT IN S_DIRECT
AND CREDAT IN S_CREDAT.
TB_ED-SNDPRN = TB_EDIDC-SNDPRN.
TB_ED-DOCNUM = TB_EDIDC-DOCNUM.
TB_ED-IDOCTP = TB_EDIDC-IDOCTP.
TB_ED-MESTYP = TB_EDIDC-MESTYP.
TB_ED-DIRECT = TB_EDIDC-DIRECT.
TB_ED-CREDAT = TB_EDIDC-CREDAT.
TB_ED-STATUS = TB_EDIDC-STATUS.
READ TABLE TB_EDPAR WITH KEY KUNNR = TB_EDIDC-SNDPRN.
READ TABLE TB_KNA1 WITH KEY KUNNR = TB_EDPAR-INPNR.
READ TABLE TB_ADRC WITH KEY ADDRNUMBER = TB_KNA1-ADRNR.
TB_ED-LOC = TB_ADRC-BUILDING.
APPEND TB_ED.
ENDLOOP.
WRITE :/02 'CustomerNo',
15 'Location Code',
30 'Idoc Number',
55 'Basic Type',
70 'Message Type',
95 'Direction',
110 'Received Date',
130 'Status'.
ULINE.
LOOP AT TB_ED.
WRITE :/02 TB_ED-SNDPRN,
15 TB_ED-LOC,
30 TB_ED-DOCNUM,
55 TB_ED-IDOCTP,
70 TB_ED-MESTYP,
95 TB_ED-DIRECT,
110 TB_ED-CREDAT,
130 TB_ED-STATUS.
ENDLOOP.
ENDFORM. " data
Kindly help me in solving the issue.
Thanks in advance.
Suki.Hi,
Check in transaction SCOT. If your mail is in error status in SCOT, you can assure that there is no problem with your code. If your message has not reached till SCOT, then the problem will be with the code.
If the mail is there in scot with error status tell the BASIS to configure it. I feel this could be the problem.
Regards,
Renjith Michael. -
Error while sending email using TemplateEmailSender in CSC server
Hi,
We are trying to send email using TemplateEmailSender from CSC server. But it is giving Null Pointer Exception in ProfiledMessageSource like below. The same code is working fine in commerce instance but it is failing in CSC instance. We are using ATG2007.1p3
Any pointers would be helpful.
Below is the error.
Error while sending email
java.lang.NullPointerException
at atg.userprofiling.dms.ProfiledMessageSource.isConfiguredForProfileSubject(ProfiledMessageSource.java:196)
at atg.userprofiling.dms.DPSMessageSource.fireEndSessionMessage(DPSMessageSource.java:864)
at atg.userprofiling.dms.DPSMessageSource.fireEndSessionMessage(DPSMessageSource.java:848)
at atg.userprofiling.SessionEventTrigger.nameContextElementPreUnbound(SessionEventTrigger.java:553)
at atg.nucleus.GenericContext.sendPreUnboundEvent(GenericContext.java:200)
at atg.nucleus.GenericContext.preNotifyRemovedObject(GenericContext.java:528)
at atg.nucleus.GenericContext.removeElement(GenericContext.java:566)
at atg.servlet.SessionNameContext.unbindFromNameContext(SessionNameContext.java:557)
at atg.servlet.SessionNameContext.stopSession(SessionNameContext.java:534)
at atg.servlet.SessionNameContext.decrementWrapperCount(SessionNameContext.java:242)
at atg.servlet.SessionBindingReporter.valueUnbound(SessionBindingReporter.java:206)
at org.apache.catalina.session.StandardSession.removeAttributeInternal(StandardSession.java:1625)
at org.apache.catalina.session.StandardSession.expire(StandardSession.java:749)
at org.apache.catalina.session.StandardSession.expire(StandardSession.java:655)
at org.apache.catalina.session.StandardSession.invalidate(StandardSession.java:1100)
at org.apache.catalina.session.StandardSessionFacade.invalidate(StandardSessionFacade.java:150)
at atg.userprofiling.email.TemplateInvoker$TemplateSession.endSession(TemplateInvoker.java:935)
at atg.userprofiling.email.TemplateEmailSender.createMessage(TemplateEmailSender.java:2387)Thanks for the reply.
My issue is fixed now. It is JBOSS configuration issue. Sessions are not maintained properly that's why we are getting NULL profile in the session. Our application has multiple WARs so we fixed it by setting emptySessionPath to TRUE. If emptySessionPath attribute in server.xml is false, then each WAR will have its own jsessionid cookie.
I did not touch ProfiledMessageSource as its required for session triggering. -
Authentication Error while Sending Email from SMTP server.
Authentication Error while Sending Email from SMTP server. Can receive emails but cannot send emails from this account.
no email account was setup on the phone unless it was issued by your company.
gmail is required but no server address ports to enter.
my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
i doubt if it's a verizon issue. -
Error while sending emails from SOA 11G BPEL
Hi All,
I have configured an error email in my catch/catch-all blocks. Incase I dont have any retry action in my faultpolicies.xml file, the error email is sent fine. However if any remote/binding fault occurs and retry is done on partnerlink, in those cases the Error Notification service fails with below error:
ORABPEL-31015
Error while sending notification.
Error while sending notification to email.
Possible causes : SDPMessaging Driver not configured; Invalid To Address is used; Email server/Messaging gateway is down; using IP address as part of email ID instead of domain name;.
Caused by: javax.naming.NameNotFoundException: While trying to look up comp/env/ejb/services/NotificationServiceBean in /app/ejb/ejb_ob_engine_wls.jar#BPELActivityManagerBean.; remaining name 'comp/env/ejb/services/NotificationServiceBean'
sendEmailNotification WSIF Exception occured. Please check stack trace "Cannot get Object part 'Responses'. No parts are set on the message"
If I throw a remote/binding fault (throw activity), the error email gets sent. However whenever the retry happens incase of a fault, the above error comes.
Any idea what can be reason behing this...
Regards
Subhankartry to call a sub process from your catch all block and use the email activity in that subprocess. this should work
-
Error while sending email from MOSS portal
Hi,
I have configured email settings on my MOSS central admin, still MOSS throws error while trying to send emails to AD users. I tried to give permission for a user in a site and it threw this error:
The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(PeopleEditor picker, String subject, String message)
at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I have provided outbound smtp server address and the email addresses as well.
Regards,
ManojOk, issue solved!! The issue was that I had to set anonymous connection directly to server. Error provided by SharePoint didn't help at all. After hours of hair-pulling and head-banging, I found a nice article that detailed how to troubleshoot e-mail issues:
http://www.tonytestasworld.com/post/2009/04/09/SharePoint-2007-Outgoing-E-mail-Troubleshooting-Tips.aspx
In the above article, the troubleshooting step 5 was the breaking point. As suggested in the blog:
http://www.sharepointblogs.com/johnwpowell/archive/2007/07/10/alerts-failing-cannot-connect-to-smtp-host.aspx
I created a C# console application and it gave me the correct error:
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1 Client was not authenticated
So I used this code to create an SMTP test application:
using System;
using System.Collections.Generic;
using System.Text;
using System.Net.Mail;
public class Program
public static void Main(string[] args)
try
// Check arguments
if (args.Length != 3)
ShowUsage();
return;
// Create message
MailMessage mmMessage = new MailMessage();
mmMessage.To.Add(new MailAddress(args[2] as string));
mmMessage.From = new MailAddress(args[1] as string);
mmMessage.Subject = "TestMail";
mmMessage.Body = "This is a test";
// Send message
SmtpClient sc = new SmtpClient(args[0] as string);
sc.Send(mmMessage);
catch (Exception ex)
Console.WriteLine(ex);
finally
//Pause
Console.WriteLine();
Console.Write("Press a key >");
Console.ReadKey();
private static void ShowUsage()
Console.WriteLine("Usage");
Console.WriteLine("TestMail [SmtpServer] [FromAddress] [ToAddress]");
} // end Program
This command saved lots of trouble for me and solved the email issue:
http://forums.msexchange.org/m_1800412705/mpage_1/key_/tm.htm
set-ReceiveConnector "default sfzcombx" -permissiongroups:"ExchangeUsers,ExchangeServers,ExchangeLegacyServers,AnonymousUsers"
Hope this helps somebody!
Regards,
Manoj -
Error while sending email to distribution list
Hello All,
I am not able to send the email to Shared & Private distribution list.
It is giving an error "Function <Send> not possible"
I can send the email to users by specyfying their email id & recepient type as Internet address while sending mail from the Business Workplace. But we want to send it to users in shared/private distribution list.
SCOT, SMTP are properly configured as per SAP Note 455140.
Interestingly Routing Test in the SAPConnect shows no errors. Also the internal traces are enabled, but it shows nothing for the outbound traces.
Response starting with "220", in the telnet results (for both SAP server & Exchange server) confirms that the SCOT configuration is correct for Mail Host & Mail Port.
We are on ECC6 on Oracle 10g & Windows.
I have searched this forum but couldnot find relevant answer.
If anybody has faced such problem, let me know how to resolve this.
Regards,
VivdhaHi,
Check in transaction SCOT. If your mail is in error status in SCOT, you can assure that there is no problem with your code. If your message has not reached till SCOT, then the problem will be with the code.
If the mail is there in scot with error status tell the BASIS to configure it. I feel this could be the problem.
Regards,
Renjith Michael. -
Error while sending email to Multiple Recipients
Hi,
I am trying to send email to multiple recipients .It works fine if all the email-addresses are valid. If even one is invalid throws exception .I wish to send it all the valid addresses even if some are invalid as this email will be going to 3000 users some of them will be wrong addresses.
Help is greatly appreciated.
-ksg
Exception thrown:
Exception in SendEmail.setAddress as :javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 550 <[email protected]>... User unknown
Here is the main piece of code:
message.saveChanges();
Transport transport = session.getTransport("smtp");
transport.connect("myhost", "", "");
transport.sendMessage(message, message.getAllRecipients());
transport.close();Hi there,
Well I find the easiest way is to use a comma delimited string with the following bit of code.
msg.setRecipients(
addrType,
InternetAddress.parse(smtpAddress, false));
addrType will be TO,CC or BCC
smtpAddress is a comma delimited string that I get from the results of a SQL Select request (looks something like "[email protected],[email protected],....,....,...."
The boolean false is to prevent the parse checking the validity of the SMTP addresses as I prefer to deal with this by letting the SMTP server tell me which addresses are no good.
Hope this helps,
SH -
Problem: Error while sending Email.(Java Mail API)
Hi to ALL
I am trying to build Application to send Email
Below code is primary code to send Email to other smtp host.
& also debug information is as shown below.
If possible, then please send the solution.
-------------------------------Code :-----------------------------------------
URLName urlN=new URLName("smtps://"+userNm+":"+passwd+"@"+host);
Properties props = System.getProperties();
Session session = Session.getDefaultInstance(props);
session.setDebug(true);
Message msg = new MimeMessage(session);
msg.setFrom(new InternetAddress(from));
InternetAddress[] address= InternetAddress.parse(to, false);
msg.setRecipients(MimeMessage.RecipientType.TO, address);
msg.setSubject("subject");
msg.setContent("messageSend Hi", "text/plain");
Transport transport=session.getTransport(urlN);
transport.connect();
transport.sendMessage(msg, address);
---------- Java Run ----------
DEBUG: setDebug: JavaMail version 1.3.2
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth false
DEBUG SMTP: trying to connect to host "hostName", port 465, isSSL true
220 smtp110.mail.mud.yahoo.com ESMTP
DEBUG SMTP: connected to host "hostName", port: 465
EHLO patil
250-smtp110.mail.mud.yahoo.com
250-AUTH LOGIN PLAIN XYMCOOKIE
250-PIPELINING
250 8BITMIME
DEBUG SMTP: Found extension "AUTH", arg "LOGIN PLAIN XYMCOOKIE"
DEBUG SMTP: Found extension "PIPELINING", arg ""
DEBUG SMTP: Found extension "8BITMIME", arg ""
DEBUG SMTP: use8bit false
MAIL FROM:<from email address>
530 authentication required - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html
com.sun.mail.smtp.SMTPSendFailedException: 530 authentication required - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html
at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1275)
at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:895)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:524)
at SendEmail2.<init>(SendEmail2.java:46)
at SendEmail2.main(SendEmail2.java:23)
Exception : com.sun.mail.smtp.SMTPSendFailedException: 530 authentication required - for help go to
http://help.yahoo.com/help/us/mail/pop/pop-11.htmls
-------------------------------------------------------------------------------------It's possible. It's only software, after all.
But it's not easy. It effectively involves
screen scraping the HTML pages.
There used to be a third party JavaMail provider
that did all the hard work, but it has disappeared. -
Error while sending email from ABAP
Hi
I am using function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send the email to an external id.
In the debugging mode i can see the function module is getting executed successfully i.e sy-surc value is 0.
But i am getting a sucess message i.e "No message sent".
Has anybody faced this kind of problem.Please let me know how to rectify this error
Thanks
DebrajHi Deb,
Have you done the relevant configuration in SCOT transaction to connect to a SMTP server and also as per note 455140???
Also this blog from Thomas Jung could help you...
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
Cheers
JK -
Error while sending images via messages
Hi there,
everytime i try to send an image (small size) from my macbook pro using osx mavericks to an iPhone i get an error that ist was not able to send the image.
How can i fix it or is it impossible to send images from macbook (OSX) to iPhone?
RegardsHi,
Are you using anything like Little Snitch (An app that monitors and tells you both incoming and outgoing connections for any App and lists ports and IP addresses involved) ?
This may be blocking the File transfer part of the iMessages side.
DO you happen to have an AIM ID set up in Messages ?
If so can you Transfer Files and pics in an AIM chat ?
(this involves a different File Transfer assistant "app")
9:11 pm Wednesday; April 9, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Error while sending Email through Java Code in OIM
Hi All,
I have created a java code using tcEmailNotificationUtil, and integrated the same with the adapter.
I am triggering this adapter when an approval process gets completed.
As soon as the approval process gets completed my email task is triggering but the task is getting rejected.
I have checked my system configuration for mail server settings.Everything seems working fine.
Can you please help me in this issue how to debug?
Thanks in advance.Hi,
Here is my log file:
DEBUG,25 Apr 2011 10:40:00,099,[XELLERATE.SERVER] - Class/Method: QuartzWrapper/insertTaskHistory left.
DEBUG,25 Apr 2011 10:40:00,099,[XELLERATE.SCHEDULER.TASK] - Class/Method: SchedulerBaseTask/run entered.
DEBUG,25 Apr 2011 10:40:00,099,[XELLERATE.SCHEDULER.TASK] - Class/Method: ReIssueAuditMessage/execute entered.
DEBUG,25 Apr 2011 10:40:00,099,[XELLERATE.SCHEDULER.TASK] - Class/Method: ReIssueAuditMessage/initialize entered.
DEBUG,25 Apr 2011 10:40:00,099,[XELLERATE.SCHEDULER.TASK] - Class/Method: SchedulerBaseTask/getAttribute entered.
DEBUG,25 Apr 2011 10:40:00,099,[XELLERATE.SCHEDULER.TASK] - Class/Method: SchedulerBaseTask/getAttribute left.
DEBUG,25 Apr 2011 10:40:00,099,[XELLERATE.SCHEDULER.TASK] - Class/Method: SchedulerBaseTask/getUtility entered.
DEBUG,25 Apr 2011 10:40:00,099,[XELLERATE.SCHEDULER.TASK] - Class/Method: SchedulerBaseTask/getUtility left.
DEBUG,25 Apr 2011 10:40:00,099,[XELLERATE.ACCOUNTMANAGEMENT] - Class/Method: tcUtilityFactory/getRemoteUtility - Data: moUtil - Value: Thor.API.Operations.tcAuditOperationsClient
DEBUG,25 Apr 2011 10:40:00,099,[XELLERATE.SCHEDULER.TASK] - Class/Method: ReIssueAuditMessage/initialize left.
DEBUG,25 Apr 2011 10:40:00,099,[XELLERATE.SCHEDULER.TASK] - Class/Method: ReIssueAuditMessage/processAllByIdentifier entered.
DEBUG,25 Apr 2011 10:40:00,099,[XELLERATE.SCHEDULER.TASK] - Class/Method: SchedulerBaseTask/isStopped entered.
DEBUG,25 Apr 2011 10:40:00,099,[XELLERATE.SCHEDULER.TASK] - Class/Method: SchedulerBaseTask/isStopped left.
DEBUG,25 Apr 2011 10:40:00,100,[XELLERATE.DATABASE] - select A.* from (select aud_jms_key, aud_class, identifier from aud_jms order by aud_jms_key) A where rownum <= ?
INFO,25 Apr 2011 10:40:00,101,[XELLERATE.PERFORMANCE] - Query: DB: 1, LOAD: 0, TOTAL: 1
DEBUG,25 Apr 2011 10:40:00,102,[XELLERATE.SCHEDULER.TASK] - Class/Method: SchedulerBaseTask/isStopped entered.
DEBUG,25 Apr 2011 10:40:00,102,[XELLERATE.SCHEDULER.TASK] - Class/Method: SchedulerBaseTask/isStopped left.
DEBUG,25 Apr 2011 10:40:00,102,[XELLERATE.SCHEDULER.TASK] - Class/Method: SchedulerBaseTask/isStopped entered.
DEBUG,25 Apr 2011 10:40:00,102,[XELLERATE.SCHEDULER.TASK] - Class/Method: SchedulerBaseTask/isStopped left.
DEBUG,25 Apr 2011 10:40:00,102,[XELLERATE.SCHEDULER.TASK] - Class/Method: ReIssueAuditMessage/execute left.
DEBUG,25 Apr 2011 10:40:00,102,[XELLERATE.SCHEDULER.TASK] - Class/Method: SchedulerBaseTask/run left.
DEBUG,25 Apr 2011 10:40:00,102,[XELLERATE.SCHEDULER.TASK] - Class/Method: SchedulerBaseTask/isSuccess entered.
DEBUG,25 Apr 2011 10:40:00,102,[XELLERATE.SCHEDULER.TASK] - Class/Method: SchedulerBaseTask/isSuccess left.
DEBUG,25 Apr 2011 10:40:00,102,[XELLERATE.SERVER] - Class/Method: SchedulerTaskLocater /removeLocalTask entered.
DEBUG,25 Apr 2011 10:40:00,102,[XELLERATE.SERVER] - Class/Method: SchedulerTaskLocater /removeLocalTask left.
DEBUG,25 Apr 2011 10:40:00,102,[XELLERATE.SERVER] - Class/Method: QuartzWrapper/updateStatusToInactive entered.
DEBUG,25 Apr 2011 10:40:00,104,[XELLERATE.SERVER] - Class/Method: QuartzWrapper/updateStatusToInactive left.
DEBUG,25 Apr 2011 10:40:00,104,[XELLERATE.SERVER] - Class/Method: QuartzWrapper/updateTaskHistory entered.
DEBUG,25 Apr 2011 10:40:00,106,[XELLERATE.SERVER] - Class/Method: QuartzWrapper/updateTaskHistory left.
DEBUG,25 Apr 2011 10:40:00,106,[XELLERATE.SERVER] - Clearing Security Associations with thread executing Scheduled task
DEBUG,25 Apr 2011 10:40:00,106,[XELLERATE.SERVER] - Class/Method: QuartzWrapper/run left.
DEBUG,25 Apr 2011 10:40:00,106,[XELLERATE.SERVER] - Class/Method: QuartzWrapper/execute left.
and I just wanted to ensure that my coding part is also fine.
Posting the code even:
tcDataProvider ioDatabase = new tcDataBaseClient();
tcEmailNotificationUtil sendMail = new tcEmailNotificationUtil(ioDatabase);
sendMail.setBody("Sample Message");
sendMail.setSubject("subject");
sendMail.setFromAddress("fromemailaddress");
sendMail.sendEmail("recepient");
Thanks in Advance. -
WHy all of a sudden, today, I can no longer send emails (via hotmail) from both iPhone 5s and ipad 2? I receive message that says "an error occurred while delivering this message". I have no problem sending emails from PC.
*** solved ***
You have to add another SMTP server as following steps:
Just go to hotmail acount setting
Then click on SMTP in outgoing mail server
Then click add server
Host name: smtp-mail.outlook.com
User name: your email
Password: your password
So now you can send mail
Thanks -
Error while sending the email notifcation
Hi All
I am getting this error while sending the email notifcation.If any one of you have any idea regarding this please suggest
[2012-09-12T03:55:41.288-10:00] [soa_server1] [ERROR] [SDP-26102] [oracle.sdp.messaging.driver.email] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: f5c1f5acbf0bb7a6:22e05768:139ba096e4d:-8000-00000000000006ef,0] [APP: usermessagingdriver-email] Error while writing e-mail message content.[[
java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
at java.util.Vector.elementAt(Vector.java:427)
at javax.mail.Multipart.getBodyPart(Multipart.java:157)
at javax.mail.internet.MimeMultipart.getBodyPart(MimeMultipart.java:256)
at oracle.sdpinternal.messaging.driver.email.EmailDriver.getHeaderEncoding(EmailDriver.java:1079)
at oracle.sdpinternal.messaging.driver.email.EmailDriver.send(EmailDriver.java:670)
at oracle.sdpinternal.messaging.driver.email.EmailManagedConnection.send(EmailManagedConnection.java:50)
at oracle.sdpinternal.messaging.driver.DriverConnectionImpl.send(DriverConnectionImpl.java:41)
at oracle.sdpinternal.messaging.dispatcher.DriverDispatcherBean.onMessage(DriverDispatcherBean.java:296)
at sun.reflect.GeneratedMethodAccessor2553.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy346.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:574)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:379)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
[2012-09-12T03:55:41.331-10:00] [soa_server1] [WARNING] [SDP-25107] [oracle.sdp.messaging.engine.store] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: f5c1f5acbf0bb7a6:22e05768:139ba096e4d:-8000-00000000000006ef,0] [APP: usermessagingserver] Message ID bac38bd50a1f32a129c5c739335a7855 in Status object does not match previously recorded Message ID b7e259a30a1f32a12c981a3ffd343f6d.
[2012-09-12T03:55:41.362-10:00] [soa_server1] [ERROR] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3066bad4] [userId: <anonymous>] [ecid: 0000Jau4qHj9Lex_w9w0yW1GK6Rn000003,1:32530] [APP: soa-infra] <.> Error status received from UMS.[[
Status detail :
Status type : DELIVERY_TO_GATEWAY:FAILURE,
Status Content : Failed to set message headers: java.lang.ArrayIndexOutOfBoundsException: 0 >= 0,
Addressed to : EMAIL:[email protected],
UMS Driver : Farm_base_domain/base_domain/soa_server1/usermessagingdriver-email:oracle_sdpmessagingdriver_email#Email-Driver,
UMS Message Id : b7e259a30a1f32a12c981a3ffd343f6d,
Gateway message Id : ,
Status Received at : Wed Sep 12 03:55:41 HST 2012.
Check status details and fix the underlying reason, which caused error.
[2012-09-12T03:55:51.492-10:00] [soa_server1] [WARNING] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3066bad4] [userId: <anonymous>] [ecid: 0000Jau4qHj9Lex_w9w0yW1GK6Rn000003,1:32530] [APP: soa-infra] <.> Could not find notification record corresponding to failed notification : (Channel message id) : b7e259a30a1f32a12c981a3ffd343f6d[[
Hence it will not be retried.
Possible cause could be purging of notification data after sending out notification, but before receiving status.
]]Are you using your email address to send the email notifications if it Is not configured with AD? Have you populated the mail attribute in weblogic console-->realms-->my realms-->users
In addition are you sure you have configured the 'Email Driver Properties' correctly in EM ?? have you specified the Notification Mode to Email ?
Please make sure that the outgoing mail server and port along with the username and password are correct.
Also validate the workflow settings in your EM?
In addition, please validate that when you logon to BPM worklist using the admin account and click on the name for e.g. weblogic, you see the email attribute populated properly.
Thanks
ACM -
Reader XI: An Error Occurred While Sending Email
Please help. I am working on a Windows XP computer (SP3, fully updated) with Microsoft Office Outlook set as the default email.
I recently updated this computer to Adobe Reader XI. Whenever the user tries to "Send File as Eamil Attachment" (either using the button or using the File menue option) they get an Adobe Reader message "An error occured while sending email."
I've checked every setting I can think of. Under Preferences - Internet - Internet Settings - Programs, her email is set as Outlook. I tried uninstalling and reinstalling Adobe. I've tried removing and re-adding the Outlook account. I've chcekd for viruses and malware. What else could be causing this problem? I haven't seen this happen on any of our other XP machines.hi,
I have updated from reader x to xi, now outlook 2010 users can no longer attach emails, this use to work fine. I posted this issue elsewhere where someone had trouble with outlook 2003. Outlook either opens up with no attachment or nothing happens at all.
If can help
thanks
Robert
Maybe you are looking for
-
Here is the source of the email: From - Wed Oct 19 15:50:34 2011 X-Account-Key: account2 X-UIDL: 00002489452dbeb7 X-Mozilla-Status: 0001 X-Mozilla-Status2: 00000000 X-Mozilla-Keys: From: "Mozilla Firefox"<[email protected]> To: undisclosed-recipi
-
Customer post ERS invoices for subcontracting PO, however vendor charges flat service fee, regardless of quantity of goods delivered. Question: ERS works based on gr-based IV, is there way for ERS to post invoice based on PO amount, regardless of GR
-
Payment block for Quality reason
HI, How can I block invoice for paymant due to quality reason ? Regards, Chetan.
-
Regading for Support Package Stack
Hi All, Can we apply ABAP patches from JSPM? I have downloaded ABAP support packages. I am waiting for yours reply. Thanks & Regards, Charanjit.
-
Premiere Pro CC & New Mac Pro - Audio Line Out Issue
I'm having a few issues with the audio line out on the new Mac Pro. For some reason, Line Out locks into Premiere Pro. When I switch programs, the audio line out device stays locked to Premiere Pro and the only way to get other programs to be able to