Error while sending mail through SMTP
Hi,
We are getting the following error while trying to send mail through SMTP.
'554 ERROR_MESSAGE_STATE: SMTP_NO_HANDLER( host:1-,subrc:0001)'
Please advice,
Regards,
Sam
Hi All,
Configured SMTP as per the note 455140,i can able to send mails from SAP to the out side world,
mails in SAP.When i tried the test to check whether the SAP system is correctly set up to receive e-mails as per the note 607108, iam getting a connection closed message as below.
afgdev:pgdadm> telnet afgdev 2500
Trying...
Connected to afgdev.
Escape character is '^]'.
220 afgdev.abc.ae SAP 6.40(52) ESMTP service ready
helo afgdev
250 afgdev.abc.ae
mail from:<[email protected]>
250 Ok
rcpt to:<[email protected]>
250 Ok
data
354 Enter mail, end with "."
Hello,This is a test.
Connection closed.
afgdev:pgdadm>
rgds
Sam
Similar Messages
-
SMICM error while sending mail using SMTP server
Hi All,
We are not able send mails using SMTP server.
We have made every settings necessary in SCOT, SO16 , SMTP service is activated, default domain is maintained etc
Only things which seems to be wrong is in SMICM trace file.
[Thr 13] *** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 29;10.26.24.44:1090) [nibuf.cpp 4608]
[Thr 13] *** WARNING => Connection request from (0/1/0) to host: 10.26.24.44, service: 1090 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2321]
This error is getting repeated in it.
BUt I am not sure why it it trying to hit 10.26.24.44, as we dont have any server by this ip. The ip is only not resolvable from the server.
1 more thing, at OS level, following parameter is maintained in profile :
icm/server_port_1 = PROT=SMTP,PORT=25000,TIMEOUT=180
But in SCOT, under SMTP node PORT is given as 25.
Kindly let me know what going wrong here?
Thanksalso getting error as follows
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript() -
Getting error while sending mail through javamail api
I can able to compile the following code successfully but while executing it showing the error
C:\Program Files\Java\javamail-1.4\demo>java msgsend -o [email protected] -M 203.112.158.188 [email protected]
Exception in thread "main" java.lang.NoClassDefFoundError: msgsend
import java.io.*;
import java.net.InetAddress;
import java.util.Properties;
import java.util.Date;
import javax.mail.*;
import javax.mail.internet.*;
public class msgsend {
public static void main(String[] argv) {
String to, subject = null, from = null,
cc = null, bcc = null, url = null;
String mailhost = "null";
String mailer = "msgsend";
String file = null;
String protocol = null, host = null, user = null, password = null;
String record = null; // name of folder in which to record mail
boolean debug = false;
BufferedReader in =
new BufferedReader(new InputStreamReader(System.in));
int optind;
for (optind = 0; optind < argv.length; optind++) {
if (argv[optind].equals("-T")) {
protocol = argv[++optind];
} else if (argv[optind].equals("-H")) {
host = argv[++optind];
} else if (argv[optind].equals("-U")) {
user = argv[++optind];
} else if (argv[optind].equals("-P")) {
password = argv[++optind];
} else if (argv[optind].equals("-M")) {
mailhost = argv[++optind];
} else if (argv[optind].equals("-f")) {
record = argv[++optind];
} else if (argv[optind].equals("-a")) {
file = argv[++optind];
} else if (argv[optind].equals("-s")) {
subject = argv[++optind];
} else if (argv[optind].equals("-o")) { // originator
from = argv[++optind];
} else if (argv[optind].equals("-c")) {
cc = argv[++optind];
} else if (argv[optind].equals("-b")) {
bcc = argv[++optind];
} else if (argv[optind].equals("-L")) {
url = argv[++optind];
} else if (argv[optind].equals("-d")) {
debug = true;
} else if (argv[optind].equals("--")) {
optind++;
break;
} else if (argv[optind].startsWith("-")) {
System.out.println(
"Usage: msgsend [[-L store-url] | [-T prot] [-H host] [-U user] [-P passwd]]");
System.out.println(
"\t[-s subject] [-o from-address] [-c cc-addresses] [-b bcc-addresses]");
System.out.println(
"\t[-f record-mailbox] [-M transport-host] [-a attach-file] [-d] [address]");
System.exit(1);
} else {
break;
try {
if (optind < argv.length) {
// XXX - concatenate all remaining arguments
to = argv[optind];
System.out.println("To: " + to);
} else {
System.out.print("To: ");
System.out.flush();
to = in.readLine();
if (subject == null) {
System.out.print("Subject: ");
System.out.flush();
subject = in.readLine();
} else {
System.out.println("Subject: " + subject);
Properties props = System.getProperties();
// XXX - could use Session.getTransport() and Transport.connect()
// XXX - assume we're using SMTP
if (mailhost != null)
props.put("mail.smtp.host", mailhost);
// Get a Session object
Session session = Session.getInstance(props, null);
if (debug)
session.setDebug(true);
// construct the message
Message msg = new MimeMessage(session);
if (from != null)
msg.setFrom(new InternetAddress(from));
else
msg.setFrom();
msg.setRecipients(Message.RecipientType.TO,
InternetAddress.parse(to, false));
if (cc != null)
msg.setRecipients(Message.RecipientType.CC,
InternetAddress.parse(cc, false));
if (bcc != null)
msg.setRecipients(Message.RecipientType.BCC,
InternetAddress.parse(bcc, false));
msg.setSubject(subject);
String text = collect(in);
if (file != null) {
// Attach the specified file.
// We need a multipart message to hold the attachment.
MimeBodyPart mbp1 = new MimeBodyPart();
mbp1.setText(text);
MimeBodyPart mbp2 = new MimeBodyPart();
mbp2.attachFile(file);
MimeMultipart mp = new MimeMultipart();
mp.addBodyPart(mbp1);
mp.addBodyPart(mbp2);
msg.setContent(mp);
} else {
// If the desired charset is known, you can use
// setText(text, charset)
msg.setText(text);
msg.setHeader("X-Mailer", mailer);
msg.setSentDate(new Date());
// send the thing off
Transport.send(msg);
System.out.println("\nMail was sent successfully.");
// Keep a copy, if requested.
if (record != null) {
// Get a Store object
Store store = null;
if (url != null) {
URLName urln = new URLName(url);
store = session.getStore(urln);
store.connect();
} else {
if (protocol != null)
store = session.getStore(protocol);
else
store = session.getStore();
// Connect
if (host != null || user != null || password != null)
store.connect(host, user, password);
else
store.connect();
// Get record Folder. Create if it does not exist.
Folder folder = store.getFolder(record);
if (folder == null) {
System.err.println("Can't get record folder.");
System.exit(1);
if (!folder.exists())
folder.create(Folder.HOLDS_MESSAGES);
Message[] msgs = new Message[1];
msgs[0] = msg;
folder.appendMessages(msgs);
System.out.println("Mail was recorded successfully.");
} catch (Exception e) {
e.printStackTrace();
public static String collect(BufferedReader in) throws IOException {
String line;
StringBuffer sb = new StringBuffer();
while ((line = in.readLine()) != null) {
sb.append(line);
sb.append("\n");
return sb.toString();
So please help me to resolve that error.The directory that contains msgsend.class (usually the current directory)
is not in your CLASSPATH setting. Be sure that "." is included as one of the
entries in CLASSPATH. -
Urgent:-REP-50152: Error while sending mail
hi
i am using reports10g. i have called a report from a form and destype=mail.
i have already mention the smtp server name in conf. file but still receiving this error
REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
thanksYour smtp server forbids relaying, which is very common. Often a smtp server is configured to send only mails within the same domain without authentication. Otherwise, you need a username and password for the smtp server. I'm not sure if you can configure Reports to send mail through an authenticated server.
-
Uncaught Exception occured while sending mail through abap code.
Hi,
Uncaught Exception occured while sending mail through abap code.Run time Errors "UNCAUGHT_EXCEPTION" occured after excuting the call method CALL METHOD SEND_REQUEST->SEND( ).kindly help in resolving the issue.HI,
Runtime Error: UNCAUGHT_EXCEPTION details.
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_ADDRESS_BCS
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_ADDRESS_BCS' was raised, but it was not caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLZSEND_MAIL' has to be
terminated.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_ADDRESS_BCS', was not caught in
procedure "SEND_MAIL" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An exception occurred
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_ADDRESS_BCS"
"SAPLZSEND_MAIL" or "LZSEND_MAILU01"
"ZSEND_EMAIL"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SEND_MAIL" "(FORM)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
Please help me to resolve this issue. -
Error while sending mail from SAP
Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
A RAISE statement in the program "SA
condition "FOLDER_NOT_EXIST".
Since the exception was not intercep
program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
HasanHello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu -
Authentication Error while Sending Email from SMTP server.
Authentication Error while Sending Email from SMTP server. Can receive emails but cannot send emails from this account.
no email account was setup on the phone unless it was issued by your company.
gmail is required but no server address ports to enter.
my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
i doubt if it's a verizon issue. -
Terminated with error: REP-50152:Error while sending mail
Hi
Gets this error while sending report mails to external email id's
Terminated with error: REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
Any setting to be done in report config file?
thanks
MGIt should be like this
<pluginParam name="mailServer">%MAILSERVER_NAME%</pluginParam>
Specify the name of your mail server in the place of %MAILSERVER_NAME% above
Also make sure that this is not commented out.
Thanks, -
Error while sending mail from SAP system
Hi all,
I configured SAP connect in ecc6.0 ehp7 while sending mail using tx sost i am error
Message cannot be transferred to node SMTP due to connection error (final) , below is the icm log.
ERROR => IcmPlAllocBuf: MpiGetOutbuf failed (rc = 14(MPI_ESTALE: outdated MPI handle)) [icxxplugin.c 1222]
ERROR => SMTP SmtpClientClose: alloc failed, rc = -3 [smtp_plg.c 3738]
ERROR => IcmBufFree(id=0/32): MpiFreeBuf failed (rc=14), MPI_ESTALE: outdated MPI handle [icxxplugin.c 165
ERROR => IcmConnClose: PlugInStopConn failed (rc=701) [icxxconn.c 3433]
can any one please help on this
Thanks,
Narendar.Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu -
Working with 9.1.0.1
I have created a task which will send Mail to user when password is changed.
so in Notification Tab i Have clicked user check box and attached a appropiate Email Defination,
when task is triggered password is changed in OID but while sending mail i am getting below error.
I checked in metalink its shows when Email Server IT Res Name should be same as that configured in System property ,i checked both are same.
1 Dec 2011 18:06:54,735,[XELLERATE.REQUESTS],Class/Method: tcEmailNotificationUtil/sendEmail encounter some problems: {1}
lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:394)
at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.sendEmail(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.checkForEmailNotification(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateSchItem(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpOIDMODIFYUSER.implementation(adpOIDMODIFYUSER.java:81)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUserData(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUser(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.updateUser(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.updateUser(tcUserOperations_voj9p2_EOImpl.java:1763)
at Thor.API.Operations.tcUserOperationsClient.updateUser(Unknown Source)
at sun.reflect.GeneratedMethodAccessor485.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)Create a task "Send Email" which will be called on SUCCESS of Change Password Task
Attach tcComplete in INTEGRATION tab And send Email from "Send Email" using Notification Tab
It seems that issue is with Change Password Task
Or Use APIs
Re: Send Mail via java code but using Mail Definitions -
Problem while sending mail through posprocess event hadler inOIM 11g r2
Hi,
i am sending mail through posprocess event hadler inOIM 11g r2 when user is created.But i am getting following error in resolver class.
java.lang.NullPointerException
at oracle.iam.identity.usermgmt.impl.UserDetailsProviderImpl.getUserDetails(UserDetailsProviderImpl.java:102)
at oracle.iam.notification.impl.util.NotificationUtil.getUserPreferences(NotificationUtil.java:83)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:523)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:271)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at oracle.iam.notification.impl.util.NotificationUtil.getUserPreferences(NotificationUtil.java:83)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:523)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:271)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
Edited by: 853559 on Sep 25, 2012 6:27 AMIf you are using Custom Notification XML, make sure to have StaticData element in it. StaticData defines the entitites that can be used in the notification template, and these entities attributes are used to define substitution tokens in the template.
-
Error while sending mail tru campaign
I have serious problem while sending mail thru a campaign in WebLogic 8.1.4 Portal. While running the application and visiting a portlet which contains the PlaceHolder which in turn is supposed to execute the campaign, the console
shows an unending exception stack trace. The Exception is : "Exception:SQL Exception creating bucket entry ... transaction rolledback".
Please help
Thanks in advance
Muhammed ShakirTurn on session debugging and examine the protocol trace. If you still can't figure it out,
post the debug output here.
Most likely you have a firewall or antivirus product that's closing the connection unexpectedly.
Possibly your server is disconnecting for some reason. The protocol trace might provide clues. -
Error: in sending mail through dynamics actions
Hi Friends,
I have a problem in sending mail through dynamics actions . In this we pass a subroutine in dynamics actions which send an mail when promotion action occured.
Problem is that sometimes it will send an mail or sometimes not. I have no idea to solve this problem.
Can anyone suggest me .
Thanks ,
Anish
Moderator message : Duplicate post locked. Continue with thread [send mail through dynamic actions|send mail through dynamic actions].
Edited by: Vinod Kumar on Sep 5, 2011 10:19 AMthis is where i created the keystore.jks file
I navigated to the location C:\Program Files\Java\jdk1.6.0_13\bin in command prompt and typed the following command to create the keystore
keytool -import -trustcacerts -alias root -file mail_test_com.crt -keystore keystore.jksI was asked to set the password for keystore and then i was asked the question "Trust this certificate? [no]:" for which i gave yes.
If this is not the right place to create the keystore.jks can you please tell me what is correct location to create the keystore file. -
Sending Mail through SMTP server
Hi
I am trying to sent the mails through smtp server but but my smtp server is not reponding, I tried to delete the account & recreated the accounts & the smtp server but unable to do that, but creating the same mail account & same smtp server works in different laptop. can any one guide me how to correct the problem & repair it.
Thanks in advance for the support.There are a couple of things you might check:
make sure that you have the server name entered correctly (for example, stmp.gmail.com)
make sure that if you have to override the default port that you have
make sure that if SSL is required to connect that you've this option ticked, and
make sure that if you need to provide a user name and password to access the server that you have.
Other than that, that's about all that I can think of.
Clinton -
Error Occurred while sending mail through gmail account
Hello,
I am writing 1 demo appln which will send a mail from my gmail account. It will show error like "javax.mail.MessagingException: 530 5.5.1 Authentication Required f77sm3109311pyh"
Here is Code : -
package demo;
import java.util.Properties;
import javax.mail.Address;
import javax.mail.Authenticator;
import javax.mail.Message;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeMessage;
public class Demo {
* @param args
public static void main(String[] args) {
try
Properties properties=System.getProperties();
properties.put("mail.smtp.host","smtp.gmail.com");
properties.put("mail.smtp.auth","true");
properties.put("mail.from","[email protected]");
properties.put("mail.smtp.port","465");
properties.put("mail.smtp.starttls.enable","true");
properties.put("mail.smtp.socketFactory.port", "465");
properties.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
properties.put("mail.smtp.socketFactory.fallback", "false");
Authenticator auth = new PopupAuthenticator();
Session session = Session.getDefaultInstance(properties,auth);
session.setDebug(true);
// Define message
MimeMessage message = new MimeMessage(session);
message.addRecipient(Message.RecipientType.TO, new InternetAddress("[email protected]"));
message.setSubject("Hello JavaMail");
message.setText("Welcome to JavaMail");
message.saveChanges();
Address address[] = message.getAllRecipients();
Address a1 = address[0];
System.out.println("Recipient : "+a1.toString());
Transport.send(message, message.getAllRecipients());
catch(Exception e){e.printStackTrace();}
and code for PopupAuthenticator :-
package demo;
import javax.mail.Authenticator;
import javax.mail.PasswordAuthentication;
import javax.swing.*;
import java.util.StringTokenizer;
public class PopupAuthenticator extends Authenticator
public PopupAuthenticator()
System.out.println("In Auth");
public PasswordAuthentication getPasswordAuthentication()
String username, password;
String result = JOptionPane.showInputDialog("Enter 'username,password'");
StringTokenizer st = new StringTokenizer(result, ",");
username = st.nextToken();
password = st.nextToken();
return new PasswordAuthentication(username, password);
But when i run this code i never get popup window asking for username/password and it throws follwing exception
javax.mail.SendFailedException: Sending failed;
nested exception is:
javax.mail.MessagingException: 530 5.5.1 Authentication Required f77sm3109311pyh
at javax.mail.Transport.send0(Transport.java:204)
at javax.mail.Transport.send(Transport.java:88)
at demo.Demo.main(Demo.java:66)
may i know wats wrong wid my code? I am confussed about when getPasswordAuthentication () method will call?
please reply me at [email protected]
thnx in advance ..
-SushrutHi bshannon ,
Thnx ..
I have removed the popup code from my PopUpAuthanticer.java file
But i got similar error ....
Here is Debug message : -
In Auth
Recipient : [email protected]
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG: SMTPTransport trying to connect to host "smtp.gmail.com", port 465
DEBUG SMTP RCVD: 220 mx.google.com ESMTP y78sm4251719pyg
DEBUG SMTP SENT: helo sushrutr
DEBUG SMTP RCVD: 250 mx.google.com at your service
DEBUG: SMTPTransport connected to host "smtp.gmail.com", port: 465
DEBUG SMTP SENT: mail from: <[email protected]>
DEBUG SMTP RCVD: 530 5.5.1 Authentication Required y78sm4251719pyg
DEBUG SMTP SENT: quit
javax.mail.SendFailedException: Sending failed;
nested exception is:
javax.mail.MessagingException: 530 5.5.1 Authentication Required y78sm4251719pyg
at javax.mail.Transport.send0(Transport.java:204)
at javax.mail.Transport.send(Transport.java:88)
at demo.Demo.main(Demo.java:53)
can u please tell me when getPasswordAuthentication() will call ? and who is going to call this ...
Thnx in advance ...
Maybe you are looking for
-
How to change encrypted password backup
HI I have an encrypted password for my iPhone backups on my MacBook. I have tried my passwords with no avail. Is there anyway I could reset the password? I really want to backup my new iPhone 6. I've tried iCloud didn't work for me. thanks
-
How to delete the messages from SXMB_MONI which are already cancelled .
Hi All, The messages were earlier in System error(Red flag) state so i cancelled it manually. I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8. if not possible , then i want to see them in ea
-
How to downgrade from ios 8.02 to 7.04 on iphone 4s
how to downgrade from ios 8.02 to 7.04 on iphone 4s?
-
Loupe in Bridge doesn't display DNG images created using DNG Converter correctly. Why?
I have noticed recently an anomaly in Bridge when viewing DNG files that are created by converting my Nikon NEF files to DNG using the DNG converter. Specifically, when clicking on the preview image of a DNG file, in order to open the loupe, the 100%
-
OSX Mountain Lion "Disk not ejected properly" USB-Finder not responding
Hello, I just upgraded to OSX Mountain Lion late 2008 macbook pro. Whenever i plug in a USB, it detects it fine. But then when i copy anything to it, it starts but then give the error message "Disk was not ejected properly". After that, my finder han