Error while sending mail to external id

Hai all,
I am trying to send mail to external mail id using the FM SO_NEW_DOCUMENT_ATT_SEND_API1. After executing when i check in sost i m getting an error 'Cannot process message, no route from sapuserto external mail id.
Can anyone help me resolve this issue pls.
Thanks in advance,
Neela

Hi,
You have to fill the tables parameter 'PACKING_LIST'.
try with these values
wa_objpack-TRANSF_BIN = space.
wa_objpack-HEAD_START = 1.
wa_objpack-HEAD_NUM   = 0.
wa_objpack-BODY_START = 1.
wa_objpack-DOC_TYPE   = 'RAW'.
APPEND wa_objpack to it_objpack.
Regards,
Daz.

Similar Messages

  • Terminated with error: REP-50152:Error while sending mail

    Hi
    Gets this error while sending report mails to external email id's
    Terminated with error: REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
    Any setting to be done in report config file?
    thanks
    MG

    It should be like this
    <pluginParam name="mailServer">%MAILSERVER_NAME%</pluginParam>
    Specify the name of your mail server in the place of %MAILSERVER_NAME% above
    Also make sure that this is not commented out.
    Thanks,

  • Error while sending mail from SAP

    Hello All,
    Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
    The details from ST22,
    Short text
        Exception condition "FOLDER_NOT_EXIST" raised.
    Error analysis
        A RAISE statement in the program "SA
        condition "FOLDER_NOT_EXIST".
        Since the exception was not intercep
        program, processing was terminated.
    Kindly suggest..
    Thank You,
    Regards,
    Hasan

    Hello Priyanka,
    Actually, I performed the following two steps in order to solve the issue:
    - In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
    - Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix  xyz.com.
    But for me the problem didnt get solved here..
    The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
    You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
    Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
    Regards,
    Himanshu

  • Urgent:-REP-50152: Error while sending mail

    hi
    i am using reports10g. i have called a report from a form and destype=mail.
    i have already mention the smtp server name in conf. file but still receiving this error
    REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
    thanks

    Your smtp server forbids relaying, which is very common. Often a smtp server is configured to send only mails within the same domain without authentication. Otherwise, you need a username and password for the smtp server. I'm not sure if you can configure Reports to send mail through an authenticated server.

  • Error while sending email to external mail - Urgent

    Hi All,
    I am getting error while sending email with attachement. The Error code is 02.
    I am not able to identify the error. bold Please help me in solving this problem.
    Is it anything wrong with the code or Any Configuration with SCOT/SOST.bold
    the code i am using is :
    REPORT YVR_F MESSAGE-ID XX .
    TABLES : EDIDC, EDIDS, EDPAR.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
    PARAMETERS : P_STATUS LIKE EDIDC-STATUS DEFAULT '51'.
    SELECT-OPTIONS : S_DIRECT FOR EDIDC-DIRECT,
                     S_MESTYP FOR EDIDC-MESTYP,
                     S_CREDAT FOR EDIDC-CREDAT.
    SELECTION-SCREEN END OF BLOCK B1 .
    PARAMETER: P_EMAIL LIKE SOMLRECI1-RECEIVER,
               P_SENDER LIKE SOMLRECI1-RECEIVER no-display,
               P_DELSPL  AS CHECKBOX,
               P_ONLINE NO-DISPLAY.
    DATA : TB_EDIDC LIKE STANDARD TABLE OF EDIDC INITIAL SIZE 0 WITH HEADER
    LINE.
    DATA : TB_EDPAR LIKE STANDARD TABLE OF EDPAR INITIAL SIZE 0 WITH HEADER
    LINE.
    DATA : TB_KNA1 LIKE STANDARD TABLE OF KNA1 INITIAL SIZE 0 WITH HEADER
    LINE.
    DATA : TB_ADRC LIKE STANDARD TABLE OF ADRC INITIAL SIZE 0 WITH HEADER
    LINE.
    DATA: INT_PDF TYPE TABLE OF TLINE WITH HEADER LINE.
    DATA : BEGIN OF TB_ED OCCURS 0,
             SNDPRN LIKE EDIDC-SNDPRN,
             LOC    LIKE ADRC-BUILDING,
             DOCNUM LIKE EDIDC-DOCNUM,
             IDOCTP LIKE EDIDC-IDOCTP,
             MESTYP LIKE EDIDC-MESTYP,
             DIRECT LIKE EDIDC-DIRECT,
             CREDAT LIKE EDIDC-CREDAT,
             STATUS LIKE EDIDC-STATUS,
           END OF TB_ED.
    DATA:   IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
                    WITH HEADER LINE.
    DATA:   IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
                    WITH HEADER LINE.
    Job Runtime Parameters
    DATA: GD_EVENTID LIKE TBTCM-EVENTID,
          GD_EVENTPARM LIKE TBTCM-EVENTPARM,
          GD_EXTERNAL_PROGRAM_ACTIVE LIKE TBTCM-XPGACTIVE,
          GD_JOBCOUNT LIKE TBTCM-JOBCOUNT,
          GD_JOBNAME LIKE TBTCM-JOBNAME,
          GD_STEPCOUNT LIKE TBTCM-STEPCOUNT,
          GD_ERROR    TYPE SY-SUBRC,
          GD_RECIEVER TYPE SY-SUBRC.
    DATA:  W_RECSIZE TYPE I,
           W_SPOOL_NR LIKE SY-SPONO.
          %_print LIKE pri_params.
    DATA: GD_SUBJECT   LIKE SODOCCHGI1-OBJ_DESCR,
          IT_MESS_BOD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          IT_MESS_ATT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          GD_SENDER_TYPE     LIKE SOEXTRECI1-ADR_TYP,
          GD_ATTACHMENT_DESC TYPE SO_OBJ_NAM,
          GD_ATTACHMENT_NAME TYPE SO_OBJ_DES.
    Spool to PDF conversions
    DATA: GD_SPOOL_NR LIKE TSP01-RQIDENT,
          GD_DESTINATION LIKE RLGRAP-FILENAME,
          GD_BYTECOUNT LIKE TST01-DSIZE,
          GD_BUFFER TYPE STRING.
    Binary store for PDF
    DATA: BEGIN OF IT_PDF_OUTPUT OCCURS 0.
            INCLUDE STRUCTURE TLINE.
    DATA: END OF IT_PDF_OUTPUT.
    DATA: GD_RECSIZE TYPE I.
    CONSTANTS: C_DEV LIKE  SY-SYSID VALUE 'DEV',
               C_NO(1)     TYPE C   VALUE ' ',
               C_DEVICE(4) TYPE C   VALUE 'LOCL'.
    DATA:   T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
            T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
            T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
            T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
            T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
            W_CNT TYPE I,
            W_SENT_ALL(1) TYPE C,
            W_DOC_DATA LIKE SODOCCHGI1.
    DATA : MSTR_PRINT_PARMS LIKE PRI_PARAMS,
           MC_VALID,
           P_REPID LIKE SY-REPID,
           WF_ID  LIKE TSP01-RQIDENT,
           LOC_BYTECOUNT TYPE I.
    *start-of-selection.
    MSTR_PRINT_PARMS-PDEST = 'LOCL'.
    P_REPID = SY-REPID.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
        authority= ' '
       COPIES                       = '1'
       COVER_PAGE                   = SPACE
       DATA_SET                     = SPACE
       DEPARTMENT                   = SPACE
       DESTINATION                  = 'LP01'
       EXPIRATION                   = '1'
       IMMEDIATELY                  = 'X'
       LAYOUT                       = 'X_65_132'
       MODE                         = SPACE
       NEW_LIST_ID                  = 'X'
       NO_DIALOG                    = 'X'
       USER                         = SY-UNAME
    IMPORTING
       OUT_PARAMETERS               = MSTR_PRINT_PARMS
       VALID                        = MC_VALID
    EXCEPTIONS
       ARCHIVE_INFO_NOT_FOUND       = 1
       INVALID_PRINT_PARAMS         = 2
       INVALID_ARCHIVE_PARAMS       = 3
       OTHERS                       = 4.
         SUBMIT (P_REPID) TO SAP-SPOOL WITHOUT SPOOL DYNPRO
                          SPOOL PARAMETERS MSTR_PRINT_PARMS.
                          AND RETURN.
    NEW-PAGE PRINT ON NO DIALOG PARAMETERS
    MSTR_PRINT_PARMS.
    perform data.
    NEW-PAGE PRINT OFF. "This marks the end of the screen for which the
    *SPOOL NO WAS GENERATED.
    WF_ID = SY-SPONO.
    *converting spool to pdf
    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
         EXPORTING
              SRC_SPOOLID              = WF_ID  "SPOOL NUMBER
              NO_DIALOG                = SPACE
              PDF_DESTINATION          = 'X'
         IMPORTING
              PDF_BYTECOUNT =
                 LOC_BYTECOUNT "NUMBER OF BYTES TRANSFERRED
         TABLES
              PDF                      = INT_PDF  "TABLE FOR PDF REPORT
         EXCEPTIONS
              ERR_NO_ABAP_SPOOLJOB     = 1
              ERR_NO_SPOOLJOB          = 2
              ERR_NO_PERMISSION        = 3
              ERR_CONV_NOT_POSSIBLE    = 4
              ERR_BAD_DESTDEVICE       = 5
              USER_CANCELLED           = 6
              ERR_SPOOLERROR           = 7
              ERR_TEMSEERROR           = 8
              ERR_BTCJOB_OPEN_FAILED   = 9
              ERR_BTCJOB_SUBMIT_FAILED = 10
              ERR_BTCJOB_CLOSE_FAILED  = 11
              OTHERS                   = 12.
    *CALL FUNCTION 'DOWNLOAD'
    *EXPORTING
    *bin_filesize = loc_bytecount "NO. OF BYTES
    *filename = 'C:/EMAILPDF.PDF'
    *filetype = 'BIN'
    **IMPORTING
    **act_filename = loc_filename
    *TABLES
    *data_tab = int_pdf.
    IF P_DELSPL EQ 'X'.
      PERFORM DELETE_SPOOL.
    ENDIF.
    Transfer the 132-long strings to 255-long strings
    LOOP AT INT_PDF.
      TRANSLATE INT_PDF USING ' ~'.
      CONCATENATE GD_BUFFER INT_PDF INTO GD_BUFFER.
    ENDLOOP.
    TRANSLATE GD_BUFFER USING '~ '.
    DO.
      IT_MESS_ATT = GD_BUFFER.
      APPEND IT_MESS_ATT.
      SHIFT GD_BUFFER LEFT BY 255 PLACES.
      IF GD_BUFFER IS INITIAL.
        EXIT.
      ENDIF.
    ENDDO.
    DESCRIBE TABLE IT_MESS_ATT LINES GD_RECSIZE.
    CHECK GD_RECSIZE > 0.
    PERFORM SENDMAIL USING P_EMAIL..
    *&      Form  sendmail
          text
    -->  p1        text
    <--  p2        text
    FORM SENDMAIL USING P_EMAIL.
      CHECK NOT ( P_EMAIL IS INITIAL ).
      REFRESH IT_MESS_BOD.
    Default subject matter
      GD_SUBJECT         = 'Subject'.
      GD_ATTACHMENT_DESC = 'IDOC LIST'.
    CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
      IT_MESS_BOD        = 'List Of Failed Idocs'.
      APPEND IT_MESS_BOD.
      IT_MESS_BOD        = 'List Of Failed Idocs'.
      APPEND IT_MESS_BOD.
    If no sender specified - default blank
      IF P_SENDER EQ SPACE.
        GD_SENDER_TYPE  = SPACE.
      ELSE.
        GD_SENDER_TYPE  = 'INT'.
      ENDIF.
    Send file by email as .xls speadsheet
      PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
                                   TABLES IT_MESS_BOD
                                          IT_MESS_ATT
                                    USING P_EMAIL
                                          'Document attachment'
                                          'PDF'
                                          GD_ATTACHMENT_NAME
                                          GD_ATTACHMENT_DESC
                                          P_SENDER
                                          GD_SENDER_TYPE
                                 CHANGING GD_ERROR
                                          GD_RECIEVER.
    ENDFORM.                    " sendmail
    *&      Form  DELETE_SPOOL
          text
    -->  p1        text
    <--  p2        text
    FORM DELETE_SPOOL.
      DATA: LD_SPOOL_NR TYPE TSP01_SP0R-RQID_CHAR.
      LD_SPOOL_NR = WF_ID.   "GD_SPOOL_NR.
      CHECK P_DELSPL <> C_NO.
      CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
           EXPORTING
                SPOOLID = LD_SPOOL_NR.
    ENDFORM.                    " DELETE_SPOOL
    *&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
          text
         -->P_IT_MESS_BOD  text
         -->P_IT_MESS_ATT  text
         -->P_P_EMAIL  text
         -->P_0846   text
         -->P_0847   text
         -->P_GD_ATTACHMENT_NAME  text
         -->P_GD_ATTACHMENT_DESC  text
         -->P_P_SENDER  text
         -->P_GD_SENDER_TYPE  text
         <--P_GD_ERROR  text
         <--P_GD_RECIEVER  text
    FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES   IT_MESSAGE
                                              IT_ATTACH
                                        USING P_EMAIL
                                              P_MTITLE
                                              P_FORMAT
                                              P_FILENAME
                                              P_ATTDESCRIPTION
                                              P_SENDER_ADDRESS
                                              P_SENDER_ADDRES_TYPE
                                     CHANGING P_ERROR
                                              P_RECIEVER.
      DATA: LD_ERROR    TYPE SY-SUBRC,
             LD_RECIEVER TYPE SY-SUBRC,
             LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
             LD_EMAIL LIKE  SOMLRECI1-RECEIVER,
             LD_FORMAT TYPE  SO_OBJ_TP ,
             LD_ATTDESCRIPTION TYPE  SO_OBJ_NAM ,
             LD_ATTFILENAME TYPE  SO_OBJ_DES ,
             LD_SENDER_ADDRESS LIKE  SOEXTRECI1-RECEIVER,
             LD_SENDER_ADDRESS_TYPE LIKE  SOEXTRECI1-ADR_TYP,
             LD_RECEIVER LIKE  SY-SUBRC.
      DATA:   T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
              T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
              T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
              T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
              T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
              W_CNT TYPE I,
              W_SENT_ALL(1) TYPE C,
              W_DOC_DATA LIKE SODOCCHGI1.
      LD_EMAIL   = P_EMAIL.
      LD_MTITLE = P_MTITLE.
      LD_FORMAT              = P_FORMAT.
      LD_ATTDESCRIPTION      = P_ATTDESCRIPTION.
      LD_ATTFILENAME         = P_FILENAME.
      LD_SENDER_ADDRESS      = P_SENDER.
      LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
    Fill the document data.
      W_DOC_DATA-DOC_SIZE = 1.
    Populate the subject/generic message attributes
      W_DOC_DATA-OBJ_LANGU = SY-LANGU.
      W_DOC_DATA-OBJ_NAME  = 'SAPRPT'.
      W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
      W_DOC_DATA-SENSITIVTY = 'F'.
    Fill the document data and get size of attachment
      CLEAR W_DOC_DATA.
      READ TABLE IT_ATTACH INDEX W_CNT.
      W_DOC_DATA-DOC_SIZE =
         ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
      W_DOC_DATA-OBJ_LANGU  = SY-LANGU.
      W_DOC_DATA-OBJ_NAME   = 'SAPRPT'.
      W_DOC_DATA-OBJ_DESCR  = LD_MTITLE.
      W_DOC_DATA-SENSITIVTY = 'F'.
      CLEAR T_ATTACHMENT.
      REFRESH T_ATTACHMENT.
      T_ATTACHMENT[] = IT_ATTACH[].
    Describe the body of the message
      CLEAR T_PACKING_LIST.
      REFRESH T_PACKING_LIST.
      T_PACKING_LIST-TRANSF_BIN = SPACE.
      T_PACKING_LIST-HEAD_START = 1.
      T_PACKING_LIST-HEAD_NUM = 0.
      T_PACKING_LIST-BODY_START = 1.
      DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
      T_PACKING_LIST-DOC_TYPE = 'RAW'.
      APPEND T_PACKING_LIST.
    Create attachment notification
      T_PACKING_LIST-TRANSF_BIN = 'X'.
      T_PACKING_LIST-HEAD_START = 1.
      T_PACKING_LIST-HEAD_NUM   = 1.
      T_PACKING_LIST-BODY_START = 1.
      DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
      T_PACKING_LIST-DOC_TYPE   =  LD_FORMAT.
      T_PACKING_LIST-OBJ_DESCR  =  LD_ATTDESCRIPTION.
      T_PACKING_LIST-OBJ_NAME   =  LD_ATTFILENAME.
      T_PACKING_LIST-DOC_SIZE   =  T_PACKING_LIST-BODY_NUM * 255.
      APPEND T_PACKING_LIST.
    Add the recipients email address
      CLEAR T_RECEIVERS.
      REFRESH T_RECEIVERS.
      T_RECEIVERS-RECEIVER = p_EMAIL.
      T_RECEIVERS-REC_TYPE = 'U'.
      T_RECEIVERS-COM_TYPE = 'INT'.
      T_RECEIVERS-NOTIF_DEL = 'X'.
      T_RECEIVERS-NOTIF_NDEL = 'X'.
      APPEND T_RECEIVERS.
      DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
    W_SENT_ALL = 'X'.
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           EXPORTING
                DOCUMENT_DATA              = W_DOC_DATA
                PUT_IN_OUTBOX              = 'X'
               SENDER_ADDRESS             = LD_SENDER_ADDRESS
               SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
                COMMIT_WORK                = 'X'
           IMPORTING
                SENT_TO_ALL                = W_SENT_ALL
           TABLES
                PACKING_LIST               = T_PACKING_LIST
                object_header              = objhead
                CONTENTS_BIN               = T_ATTACHMENT
                CONTENTS_TXT               = IT_MESSAGE
                RECEIVERS                  = T_RECEIVERS
           EXCEPTIONS
                TOO_MANY_RECEIVERS         = 1
                DOCUMENT_NOT_SENT          = 2
                OPERATION_NO_AUTHORIZATION = 4
                OTHERS                     = 99.
      IF SY-SUBRC NE 0.
        MESSAGE E000 WITH 'Error occurred while sending'.
      ELSE.
        MESSAGE I000 WITH 'The document was sent'.
      ENDIF.
    ENDFORM.                    " SEND_FILE_AS_EMAIL_ATTACHMENT
    *&      Form  data
          text
    -->  p1        text
    <--  p2        text
    FORM data.
    SELECT SNDPRN
             DOCNUM
             IDOCTP
             MESTYP
             DIRECT
             CREDAT
             STATUS
             FROM EDIDC
             INTO CORRESPONDING FIELDS
             OF TABLE TB_EDIDC
             WHERE STATUS = P_STATUS
             AND MESTYP IN S_MESTYP
             AND DIRECT IN S_DIRECT
             AND CREDAT IN S_CREDAT.
    SELECT KUNNR
           INPNR
           FROM EDPAR
           INTO CORRESPONDING FIELDS
           OF TABLE TB_EDPAR
           FOR ALL ENTRIES IN TB_EDIDC
           WHERE KUNNR = TB_EDIDC-SNDPRN.
    SELECT KUNNR
           ADRNR
           FROM KNA1
           INTO CORRESPONDING FIELDS
           OF TABLE TB_KNA1
           FOR ALL ENTRIES IN TB_EDPAR
           WHERE KUNNR = TB_EDPAR-INPNR.
    SELECT ADDRNUMBER
           BUILDING
           FROM ADRC
           INTO CORRESPONDING FIELDS
           OF TABLE TB_ADRC
           FOR ALL ENTRIES IN TB_KNA1
           WHERE ADDRNUMBER = TB_KNA1-ADRNR.
    LOOP AT TB_EDIDC WHERE STATUS = P_STATUS
                     AND MESTYP IN S_MESTYP
                     AND DIRECT IN S_DIRECT
                     AND CREDAT IN S_CREDAT.
      TB_ED-SNDPRN = TB_EDIDC-SNDPRN.
      TB_ED-DOCNUM = TB_EDIDC-DOCNUM.
      TB_ED-IDOCTP = TB_EDIDC-IDOCTP.
      TB_ED-MESTYP = TB_EDIDC-MESTYP.
      TB_ED-DIRECT = TB_EDIDC-DIRECT.
      TB_ED-CREDAT = TB_EDIDC-CREDAT.
      TB_ED-STATUS = TB_EDIDC-STATUS.
      READ TABLE TB_EDPAR WITH KEY KUNNR = TB_EDIDC-SNDPRN.
      READ TABLE TB_KNA1 WITH KEY KUNNR = TB_EDPAR-INPNR.
      READ TABLE TB_ADRC WITH KEY ADDRNUMBER = TB_KNA1-ADRNR.
      TB_ED-LOC = TB_ADRC-BUILDING.
      APPEND TB_ED.
    ENDLOOP.
    WRITE :/02 'CustomerNo',
            15 'Location Code',
            30 'Idoc Number',
            55 'Basic Type',
            70 'Message Type',
            95 'Direction',
            110 'Received Date',
            130 'Status'.
    ULINE.
    LOOP AT TB_ED.
      WRITE :/02 TB_ED-SNDPRN,
              15 TB_ED-LOC,
              30 TB_ED-DOCNUM,
              55 TB_ED-IDOCTP,
              70 TB_ED-MESTYP,
              95 TB_ED-DIRECT,
              110 TB_ED-CREDAT,
              130 TB_ED-STATUS.
    ENDLOOP.
    ENDFORM.                    " data
    Kindly help me in solving the issue.
    Thanks in advance.
    Suki.

    Hi,
    Check in transaction SCOT. If your mail is in error status in SCOT, you can assure that there is no problem with your code. If your message has not reached till SCOT, then the problem will be with the code.
    If the mail is there in scot with error status tell the BASIS to configure it. I feel this could be the problem.
    Regards,
    Renjith Michael.

  • Problem while sending mail to external mail ids

    Hi All,
    while trying to send mail to external mail ids through some custom program, i'm facing an error as "recipient not in address management".
    Can anyone giude me why this is occuring and actually what is this Address management?
    Thanks & Regards,
    Anil.

    Hi,
    Check this sample code..
    http://www.sapdevelopment.co.uk/reporting/email/email_mbody.htm
    * Add the recipients email address
      clear it_receivers.
      refresh it_receivers.
    <b>  it_receivers-receiver = p_email.
      it_receivers-rec_type = 'U'.
      it_receivers-com_type = 'INT'.</b>
      it_receivers-notif_del = 'X'.
      it_receivers-notif_ndel = 'X'.
      append it_receivers.
    what Fm you are using..?are you specifying like above for e-mail address..
    Regards
    vijay

  • Error While sending mail

    Working with 9.1.0.1
    I have created a task which will send Mail to user when password is changed.
    so in Notification Tab i Have clicked user check box and attached a appropiate Email Defination,
    when task is triggered password is changed in OID but while sending mail i am getting below error.
    I checked in metalink its shows when Email Server IT Res Name should be same as that configured in System property ,i checked both are same.
    1 Dec 2011 18:06:54,735,[XELLERATE.REQUESTS],Class/Method: tcEmailNotificationUtil/sendEmail encounter some problems: {1}
    lang.NullPointerException
    at java.util.Hashtable.put(Hashtable.java:394)
    at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.sendEmail(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.checkForEmailNotification(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateSchItem(Unknown Source)
    at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
    at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
    at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpOIDMODIFYUSER.implementation(adpOIDMODIFYUSER.java:81)
    at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
    at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
    at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
    at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
    at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUserData(Unknown Source)
    at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUser(Unknown Source)
    at com.thortech.xl.ejb.beans.tcUserOperationsSession.updateUser(Unknown Source)
    at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.updateUser(tcUserOperations_voj9p2_EOImpl.java:1763)
    at Thor.API.Operations.tcUserOperationsClient.updateUser(Unknown Source)
    at sun.reflect.GeneratedMethodAccessor485.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)

    Create a task "Send Email" which will be called on SUCCESS of Change Password Task
    Attach tcComplete in INTEGRATION tab And send Email from "Send Email" using Notification Tab
    It seems that issue is with Change Password Task
    Or Use APIs
    Re: Send Mail via java code but using Mail Definitions

  • Error while sending mail from SAP system

    Hi all,
    I configured SAP connect  in ecc6.0 ehp7 while sending mail using tx sost i am error
    Message cannot be transferred to node SMTP due to connection error (final) , below is the icm log.
    ERROR => IcmPlAllocBuf: MpiGetOutbuf failed (rc = 14(MPI_ESTALE: outdated MPI handle)) [icxxplugin.c 1222]
    ERROR => SMTP SmtpClientClose: alloc failed, rc = -3 [smtp_plg.c   3738]
    ERROR => IcmBufFree(id=0/32): MpiFreeBuf failed (rc=14), MPI_ESTALE: outdated MPI handle [icxxplugin.c 165
    ERROR => IcmConnClose: PlugInStopConn failed (rc=701) [icxxconn.c   3433]
    can any one please help on this
    Thanks,
    Narendar.

    Hello Priyanka,
    Actually, I performed the following two steps in order to solve the issue:
    - In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
    - Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix  xyz.com.
    But for me the problem didnt get solved here..
    The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
    You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
    Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
    Regards,
    Himanshu

  • Error while sending mail tru campaign

    I have serious problem while sending mail thru a campaign in WebLogic 8.1.4 Portal. While running the application and visiting a portlet which contains the PlaceHolder which in turn is supposed to execute the campaign, the console
    shows an unending exception stack trace. The Exception is : "Exception:SQL Exception creating bucket entry ... transaction rolledback".
    Please help
    Thanks in advance
    Muhammed Shakir

    Turn on session debugging and examine the protocol trace. If you still can't figure it out,
    post the debug output here.
    Most likely you have a firewall or antivirus product that's closing the connection unexpectedly.
    Possibly your server is disconnecting for some reason. The protocol trace might provide clues.

  • Error while sending mail from SAP to external mail id

    Hello Experts,
    I am blocked by the below problem.
    I am trying to send email from SAP to an external email ID. I have tried using Class approach as well as the function 'SO_DOCUMENT_SEND_API1' for the same.
    Everytime i get the following message:
    Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 <email address> Sender address rejected.
    I am not at all able to figure out why this type of error is coming.
    The same code is working on the development environment but not on the test system.
    Please reply back asap as i am completely blocked due to this.
    Thanks/Regards,
    Himanshu

    Hello Priyanka,
    Actually, I performed the following two steps in order to solve the issue:
    - In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
    - Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix  xyz.com.
    But for me the problem didnt get solved here..
    The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
    You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
    Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
    Regards,
    Himanshu

  • Error while sending mail in RDI Format

    Hi All
    I have a requirement automate sending of invoices customers via fax and e-mail in RDI format.
    For this I created a from and used the parameter raw_data_interface = 'X' for this and for sending mail filled the parameters MAIL_SENDER and MAIL_RECIPIENT for sending a mail, used device as 'MAIL'.
    When I run the program i get the error "No Output Device Defined". Could you please tell where the issue is.
    Best Regards,
    Pradeep.

    hi,
    i am having one prob...
    how to send a alv report to external mail id....like gmail,yahoo etc....
    can u send me the code..
    Pls........

  • Error while sending mail through SMTP

    Hi,
      We are getting the following error while trying to send mail through SMTP.
    '554 ERROR_MESSAGE_STATE: SMTP_NO_HANDLER( host:1-,subrc:0001)'
    Please advice,
    Regards,
    Sam

    Hi All,
      Configured SMTP as per the note 455140,i can able to send mails from SAP to the out side world,
    mails in SAP.When i tried the test to check whether the SAP system is correctly set up to receive e-mails as per the note 607108, iam getting a connection closed message as below.                                                                           
    afgdev:pgdadm> telnet afgdev 2500                                          
    Trying...                                                                  
    Connected to afgdev.                                                       
    Escape character is '^]'.                                                  
    220 afgdev.abc.ae SAP 6.40(52) ESMTP service ready                   
    helo afgdev                                                                
    250 afgdev.abc.ae                                                    
    mail from:<[email protected]>                                      
    250 Ok                                                                     
    rcpt to:<[email protected]>                                 
    250 Ok                                                                     
    data                                                                       
    354 Enter mail, end with "."                                               
    Hello,This is a test.                                                      
    Connection closed.                                                         
    afgdev:pgdadm> 
    rgds
    Sam

  • Error while sending mail using script task in ssis 2008

    Hi,
        i am trying to send mail using ssis 2008 script task.for my requirement i am not able to use send mail task.
    code i have used is
    declared read only variables system::packagename
     Dim PACKAGE As String
            PACKAGE = Dts.Variables("System::PackageName").Value.ToString()
            Dim myHtmlMessage As MailMessage
            Dim mySmtpClient As SmtpClient
            myHtmlMessage = New MailMessage("[email protected]", "[email protected]", "PACKAGE STATUS", PACKAGE + "WAS FAILED")
         mySmtpClient = New SmtpClient("smtp.gmail.com")
            mySmtpClient.Credentials = New NetworkCredential("[email protected]", "mypassword")
            mySmtpClient.EnableSsl = True
            mySmtpClient.Port = 587
            mySmtpClient.Send(myHtmlMessage)
    error i am getting is
    Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
    Authentication Required. Learn more at
       at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
       at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
       at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
       at System.Net.Mail.SmtpClient.Send(MailMessage message)
       at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
       at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
       at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
    can any one tell me where i am going wrong

    also getting error as follows
    Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
    Authentication Required. Learn more at
       at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
       at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
       at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
       at System.Net.Mail.SmtpClient.Send(MailMessage message)
       at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
       at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
       at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()

  • Error while sending mail with pdf attachment

    Dear All,
    I am sending mail to outlook Internet address, with PDF attachment, if i have the some text in the mail along with the attachment,
    then the PDF attachment file is not opeining, throws file corrupted error.
    If i don't have the text for mail body, and send only attachment then the PDF attachments working fine.
    Please help.
    regards,
    Kumar.

    Hi Kumar,
    If you are using the th FM "SO_NEW_DOCUMENT_ATT_SEND_API1" to send the PDF data(As an attachment) to an internet address, try prepare an internal table with the text you want to mention in your mail. This table needs to be passed to the
    'contents_txt' of this function module.  You can check your mail in SOST transaction and in DOC Content section.
      Ex:  wa_objtxt           = 'Regards'.
             APPEND wa_objtxt TO t_objtxt.
    I am sure that you won't get any problem if you follow the procedure mentioned above.
    Thank You,
    Regards,
    Naresh.

  • SMICM error while sending mail using SMTP server

    Hi All,
    We are not able send mails using SMTP server.
    We have made every settings necessary in SCOT, SO16 , SMTP service is activated, default domain is maintained etc
    Only things which seems to be wrong is in SMICM trace file.
    [Thr 13] *** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 29;10.26.24.44:1090) [nibuf.cpp    4608]
    [Thr 13] *** WARNING => Connection request from (0/1/0) to host: 10.26.24.44, service: 1090 failed (NIECONN_REFUSED)
    [icxxconn_mt.c 2321]
    This error is getting repeated in it.
    BUt I am not sure why it it trying to hit 10.26.24.44, as we dont have any server by this ip. The ip is only not resolvable from the server.
    1 more thing, at OS level, following parameter is maintained in profile :
    icm/server_port_1 = PROT=SMTP,PORT=25000,TIMEOUT=180
    But in SCOT, under SMTP node PORT is given as 25.
    Kindly let me know what going wrong here?
    Thanks

    also getting error as follows
    Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
    Authentication Required. Learn more at
       at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
       at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
       at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
       at System.Net.Mail.SmtpClient.Send(MailMessage message)
       at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
       at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
       at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()

Maybe you are looking for

  • Problem with Adobe Reader (GUI)

    Hi, I´ve got a problem with my Adobe Reader (v. 11.0.10). Everytime when I open some document, I´m getting graphical problems: Menu is hidden When I move by mouse over the menu, it dissappears. And when I maximize the window.. Thanks for your help.

  • Final Cut Pro 5 on Snow Leopard

    Hello, I'm really not sure if this has been answered by others, but so far, everywhere I look I'm either not seeing the answer I want, or it's a different platform. I have a MacBook (Aluminum, Late 2008) Model. It originally came with 10.5 (Leopard).

  • A big THANK YOU to B. NOIR! because...

    I just experienced my first "iTunes has encountered an error and needs to close" warning!, when I booted up my machine this morning and tried to launch iTunes. I tried and tried to coax iTunes to open but I wasn't successful! Next, I decided to back

  • Why do I get a files icon and a Firefox icon when I save a website to my desktop?

    When ever I save a website to my desktop I usually get two icons that show up on my desktop. One of the icons is the link to the website the other is a file folder filled with a bunch of files that I don't recognize. If I delete the file folder icon

  • HP Touch Smart PC windows 7

    The Aero on my computer will not open says Mirror drivers don't support Aero effects, how to I get the Mirror drivers? I know I had them before, but I was cleaning out some old programs an I may have removed it by mistake.