Error while sending message from BI to XI

Hello Gurus,
I am trying to push data from BI to XI, following procedure form guide "Push data from BI to XI - 1.00 May 2004).
I have created the table to be exported via Open Hub Destination, I have created an entry within SLG0, I have defined ABAP class (all according to steps in guide), and finally I have created process chain that:
1. starts the process
2. executes APD (data to be exported preparation)
3. activates data in exporting structure
4, sends the message to XI that data is ready to be fetched
I have a problem with last entry. It fails, and outputs following message:
Job ZPUSH has been started because of event RSPROCESS
4I8WSSPB6BEBSWCP5L9DVIA6L . This job is not, however, known in the
active version of the process chain.
The last element of my chain is defined as "other process type". This element is expected to send a message to XI.
In the procedure described in a quide I see no reference to an ABAP class (that I have defined in a certain step)
Please advice

Tere was wrong (default) abap class assigment in other types entry definition

Similar Messages

Error while sending data from XI to BI System

Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
Narendra

Hi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal

Error while sending mail from SAP

Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
    Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
    A RAISE statement in the program "SA
    condition "FOLDER_NOT_EXIST".
    Since the exception was not intercep
    program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
Hasan

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Error While sending infopackages from OLTP to BI/urgent

Hi BW friends
im workin on production support and im new to it.while
running infopackage X ,it is throwing a error
error:While sending infopackages from OLTP to BI/urgent
In status tab it shows traingular yellow colour
and diagnosis says that No idocs could be sent to bi using rfc.
so if u know please reply me
Thank you
Amarnath k

while loading data into the target we got this message and the solution is do manual update for that.

SOAP Receiver- Error While Sending Message: 500 Internal Server Error

Hello,
Our scenario: IDoc to SOAP
I have added a third party system in the SLD and have used the same in my ID configuration.
An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
I have tested the scenario in ID from Interface Determination and its successful.
But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
"Error while sending message:500 Internal server error"
If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
Regards,
Abhishek

Hello,
Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
http://host:port/sap/xi/engine?type=entry
Also check your firewall settings from PI to the third-party system.
Hope this helps,
Mark
Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM

" Error while sending message: 500 Internal Server Error" RNIF Adapter

Hi,
I have configured B2B integration as   Sender : RNIF adapter & Receiver: XI Adapter.
I am able to test the configuration successfully in ESR and ID. But, whille testing with RWB using same test data, i am getting the following error:
Error while sending message: 500 Internal Server Errot.
     Could you anybody help me, what could be the reason? Even i am not getting any error messages in SXMB_MONI.
Thanks
Laxman

Hope this helps..
-Is the 500 internal SErver Error in RWB is only for this issue and the message is successfully processed in SXMB_MONI?
   Could be the PI Service User :PIAFUSER(Adapter framework user) login crendential issue or run out time error.
Try taking the payload from sxmb_moni and enter it in RWB > Adater engine> Test Message Tab > give proper sender interface information , enter payload and try sending message.   check what is behaviour

Error while sending message.

Hi,Could anyone explain the below error message and tell me how can we solve this?
Error while sending message: com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=NDE_CLNT200;TS=;AN=Z_FI_OUTBOUND_SAP_TO_SIP;ANS=urn:sap-com:document:sap:rfc:functions;
Regards,
sai.

Hello,
I have the same problem here. I already did many times redefine the wohle szenario and also tried out many different adapters. But any time I get the same error message. I checked the agreements and determinations very carefully. The Test in IDR said this:
Senderagreement
<not found>
<Trace level="1" type="B">SENDER AGREEMENT SIMULATION</Trace> <Trace level="1" type="T">Simulating Adapter Engine...</Trace> <Trace level="1" type="T">Simply trying to loolup for the most specific Sender Agreement object</Trace> <Trace level="1" type="T">no objects found</Trace> <Trace level="1" type="T">Note that real results may differ</Trace>
Receiverdetermination
| BusSys_A | MI_HTTPtoJDBC_HTTP
<Trace level="1" type="B">CL_RD_PLSRV-ENTER_PLSRV</Trace>... (4 Zeilen)
Interface-determination
| BusSys_A | MI_HTTPtoJDBC_HTTP | | BusSys_B
<Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>... (4 Zeilen)
Interface-Mapping
<not found>
Runtimeerror
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_HTTPtoJDBC_Input_: RuntimeException in Message-Mapping transformatio~
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>... (152 Zeilen)
I hope you can help me getting it working. thank you

Authentication Error while Sending Email from SMTP server.

Authentication Error while Sending Email from SMTP server. Can receive emails but cannot send emails from this account.

no email account was setup on the phone unless it was issued by your company.
gmail is required but no server address ports to enter.
my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
i doubt if it's a verizon issue.

Imp: Error while sending message: 500 Internal Server Error

Hi all
while testing my scenarios- by sending the message through component monitoring in RWB I get the following error in Integration Server
<b>"Error while sending message: 500 Internal Server Error "</b>
It seems that integration server is not picking up the messages.
Can anyone help me on this?
thanks
Abhishek

Hi Abhishek,
Check whether the integration url is pointing to correct one something like http://host url:http port/sap/xi/engine?type=entry.
Please do refer the below blog:
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Prasanthi.

Error while testing message from Integration Engine.

Hi,
Trying to send message to Integration engine from RWB, using test mesage tab in Integration engine.
I pasted the payload(IDOC payload) , entered sender service, interface name and namespace and also username and password. Selected quality of servie as Exactly once.
While sending the message getting the following error - "Error while sending".
What could be possible reasons for this error.
Thanks.

Hi,
Please check the following possibilities:
1. Make sure you have selected integration Engine oprtion and not the adapter engine.
2. The USERID and password should be correct.
Please let me know if you still face the problem.
Regards,
Shwetambari.

Error while sending emails from SOA 11G BPEL

Hi All,
I have configured an error email in my catch/catch-all blocks. Incase I dont have any retry action in my faultpolicies.xml file, the error email is sent fine. However if any remote/binding fault occurs and retry is done on partnerlink, in those cases the Error Notification service fails with below error:
ORABPEL-31015
Error while sending notification.
Error while sending notification to email.
Possible causes : SDPMessaging Driver not configured; Invalid To Address is used; Email server/Messaging gateway is down; using IP address as part of email ID instead of domain name;.
Caused by: javax.naming.NameNotFoundException: While trying to look up comp/env/ejb/services/NotificationServiceBean in /app/ejb/ejb_ob_engine_wls.jar#BPELActivityManagerBean.; remaining name 'comp/env/ejb/services/NotificationServiceBean'
sendEmailNotification WSIF Exception occured. Please check stack trace "Cannot get Object part 'Responses'. No parts are set on the message"
If I throw a remote/binding fault (throw activity), the error email gets sent. However whenever the retry happens incase of a fault, the above error comes.
Any idea what can be reason behing this...
Regards
Subhankar

try to call a sub process from your catch all block and use the email activity in that subprocess. this should work

Error while sending message to SOAP receiver

Hi ALL,
when i send message from the Service Regestry my interface is working,but when i coppy the same WSDL file in the Service registry in desktop and send message using AltovaSPY i am getting this error.
com.sap.aii.af.service.cpa.CPAException: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve inbound binding for the given P/S/A values
need u'r help.
thanks
Souz..

Hi Dominic,
Looks like Cache is not got updated.
Go to SXI_CACHE and check whether it is green or not.If not refresh it.
Also refresh CPACache with PIDIRUSER or any user with similar roles.
to refresh use this URL : http://host:port/CPACache/refresh?mode=full
After this inactivate and activate ur CC.
If this wont work for u...then restart J2EE server.
Regds,
Pinangshuk.

Error while sending email from MOSS portal

Hi,
I have configured email settings on my MOSS central admin, still MOSS throws error while trying to send emails to AD users. I tried to give permission for a user in a site and it threw this error:
The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator.   at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(PeopleEditor picker, String subject, String message)
   at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
   at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
   at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I have provided outbound smtp server address and the email addresses as well.
Regards,
Manoj

Ok, issue solved!! The issue was that I had to set anonymous connection directly to server. Error provided by SharePoint didn't help at all. After hours of hair-pulling and head-banging, I found a nice article that detailed how to troubleshoot e-mail issues:
http://www.tonytestasworld.com/post/2009/04/09/SharePoint-2007-Outgoing-E-mail-Troubleshooting-Tips.aspx
In the above article, the troubleshooting step 5 was the breaking point. As suggested in the blog:
http://www.sharepointblogs.com/johnwpowell/archive/2007/07/10/alerts-failing-cannot-connect-to-smtp-host.aspx
I created a C# console application and it gave me the correct error:
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1 Client was not authenticated
So I used this code to create an SMTP test application:
using System;
using System.Collections.Generic;
using System.Text;
using System.Net.Mail;
public class Program
public static void Main(string[] args)
try
// Check arguments
if (args.Length != 3)
ShowUsage();
return;
// Create message
MailMessage mmMessage = new MailMessage();
mmMessage.To.Add(new MailAddress(args[2] as string));
mmMessage.From = new MailAddress(args[1] as string);
mmMessage.Subject = "TestMail";
mmMessage.Body = "This is a test";
// Send message
SmtpClient sc = new SmtpClient(args[0] as string);
sc.Send(mmMessage);
catch (Exception ex)
Console.WriteLine(ex);
finally
//Pause
Console.WriteLine();
Console.Write("Press a key >");
Console.ReadKey();
private static void ShowUsage()
Console.WriteLine("Usage");
Console.WriteLine("TestMail [SmtpServer] [FromAddress] [ToAddress]");
} // end Program
This command saved lots of trouble for me and solved the email issue:
http://forums.msexchange.org/m_1800412705/mpage_1/key_/tm.htm
set-ReceiveConnector "default sfzcombx" -permissiongroups:"ExchangeUsers,ExchangeServers,ExchangeLegacyServers,AnonymousUsers"
Hope this helps somebody!
Regards,
Manoj

Error while sending mail from SAP system

Hi all,
I configured SAP connect in ecc6.0 ehp7 while sending mail using tx sost i am error
Message cannot be transferred to node SMTP due to connection error (final) , below is the icm log.
ERROR => IcmPlAllocBuf: MpiGetOutbuf failed (rc = 14(MPI_ESTALE: outdated MPI handle)) [icxxplugin.c 1222]
ERROR => SMTP SmtpClientClose: alloc failed, rc = -3 [smtp_plg.c 3738]
ERROR => IcmBufFree(id=0/32): MpiFreeBuf failed (rc=14), MPI_ESTALE: outdated MPI handle [icxxplugin.c 165
ERROR => IcmConnClose: PlugInStopConn failed (rc=701) [icxxconn.c 3433]
can any one please help on this
Thanks,
Narendar.

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Error while sending mail from SAP to external mail id

Hello Experts,
I am blocked by the below problem.
I am trying to send email from SAP to an external email ID. I have tried using Class approach as well as the function 'SO_DOCUMENT_SEND_API1' for the same.
Everytime i get the following message:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 <email address> Sender address rejected.
I am not at all able to figure out why this type of error is coming.
The same code is working on the development environment but not on the test system.
Please reply back asap as i am completely blocked due to this.
Thanks/Regards,
Himanshu

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Error while sending message from BI to XI

Similar Messages

Maybe you are looking for