Error while sending message.

Hi,Could anyone explain the below error message and tell me how can we solve this?
Error while sending message: com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=NDE_CLNT200;TS=;AN=Z_FI_OUTBOUND_SAP_TO_SIP;ANS=urn:sap-com:document:sap:rfc:functions;
Regards,
sai.

Hello,
I have the same problem here. I already did many times redefine the wohle szenario and also tried out many different adapters. But any time I get the same error message. I checked the agreements and determinations very carefully. The Test in IDR said this:
Senderagreement
<not found>
<Trace level="1" type="B">SENDER AGREEMENT SIMULATION</Trace> <Trace level="1" type="T">Simulating Adapter Engine...</Trace> <Trace level="1" type="T">Simply trying to loolup for the most specific Sender Agreement object</Trace> <Trace level="1" type="T">no objects found</Trace> <Trace level="1" type="T">Note that real results may differ</Trace>
Receiverdetermination
| BusSys_A | MI_HTTPtoJDBC_HTTP
<Trace level="1" type="B">CL_RD_PLSRV-ENTER_PLSRV</Trace>... (4 Zeilen)
Interface-determination
| BusSys_A | MI_HTTPtoJDBC_HTTP | | BusSys_B
<Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>... (4 Zeilen)
Interface-Mapping
<not found>
Runtimeerror
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_HTTPtoJDBC_Input_: RuntimeException in Message-Mapping transformatio~
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>... (152 Zeilen)
I hope you can help me getting it working. thank you

Similar Messages

SOAP Receiver- Error While Sending Message: 500 Internal Server Error

Hello,
Our scenario: IDoc to SOAP
I have added a third party system in the SLD and have used the same in my ID configuration.
An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
I have tested the scenario in ID from Interface Determination and its successful.
But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
"Error while sending message:500 Internal server error"
If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
Regards,
Abhishek

Hello,
Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
http://host:port/sap/xi/engine?type=entry
Also check your firewall settings from PI to the third-party system.
Hope this helps,
Mark
Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM

" Error while sending message: 500 Internal Server Error" RNIF Adapter

Hi,
I have configured B2B integration as   Sender : RNIF adapter & Receiver: XI Adapter.
I am able to test the configuration successfully in ESR and ID. But, whille testing with RWB using same test data, i am getting the following error:
Error while sending message: 500 Internal Server Errot.
     Could you anybody help me, what could be the reason? Even i am not getting any error messages in SXMB_MONI.
Thanks
Laxman

Hope this helps..
-Is the 500 internal SErver Error in RWB is only for this issue and the message is successfully processed in SXMB_MONI?
   Could be the PI Service User :PIAFUSER(Adapter framework user) login crendential issue or run out time error.
Try taking the payload from sxmb_moni and enter it in RWB > Adater engine> Test Message Tab > give proper sender interface information , enter payload and try sending message.   check what is behaviour

Imp: Error while sending message: 500 Internal Server Error

Hi all
while testing my scenarios- by sending the message through component monitoring in RWB I get the following error in Integration Server
<b>"Error while sending message: 500 Internal Server Error "</b>
It seems that integration server is not picking up the messages.
Can anyone help me on this?
thanks
Abhishek

Hi Abhishek,
Check whether the integration url is pointing to correct one something like http://host url:http port/sap/xi/engine?type=entry.
Please do refer the below blog:
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Prasanthi.

Error while sending message to SOAP receiver

Hi ALL,
when i send message from the Service Regestry my interface is working,but when i coppy the same WSDL file in the Service registry in desktop and send message using AltovaSPY i am getting this error.
com.sap.aii.af.service.cpa.CPAException: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve inbound binding for the given P/S/A values
need u'r help.
thanks
Souz..

Hi Dominic,
Looks like Cache is not got updated.
Go to SXI_CACHE and check whether it is green or not.If not refresh it.
Also refresh CPACache with PIDIRUSER or any user with similar roles.
to refresh use this URL : http://host:port/CPACache/refresh?mode=full
After this inactivate and activate ur CC.
If this wont work for u...then restart J2EE server.
Regds,
Pinangshuk.

Service Desk: error while sending message to SAP

Hello Gurus,
I have configured Service Desk in Solution Manager. When i create a message in one of my Satellite Systems the message appears in Solman but when i try ro send the message to SAP i get the following error.
"You do not have authorization to Send or Compare a notification"
The user has SAP_ALL and NEW and the same has been maintained in AISUSER table. After i get the error i executed SU53 but there are no missing authorization.
Can someone please tell me what the problem could be?
Regards
Anil Verma B

Hi,
Apart from the SAPOSS, SAP-OSS, SAP-OSS-LIST-01 rfcs, pls ensure the basic authorizations for solman has been verified and given.
SAP_SUPPDESK_ADMIN
SAP_SUPPDESK_CREATE
SAP_SV_FDB_NOTIF_BC_ADMIN
Please also verify if you had the BADI settings done correctly as per note
1140822 SAP customer number for installation number &1 unkn
Hope this helps.
Cheers
Sh

Error while sending message from BI to XI

Hello Gurus,
I am trying to push data from BI to XI, following procedure form guide "Push data from BI to XI - 1.00 May 2004).
I have created the table to be exported via Open Hub Destination, I have created an entry within SLG0, I have defined ABAP class (all according to steps in guide), and finally I have created process chain that:
1. starts the process
2. executes APD (data to be exported preparation)
3. activates data in exporting structure
4, sends the message to XI that data is ready to be fetched
I have a problem with last entry. It fails, and outputs following message:
Job ZPUSH has been started because of event RSPROCESS
4I8WSSPB6BEBSWCP5L9DVIA6L . This job is not, however, known in the
active version of the process chain.
The last element of my chain is defined as "other process type". This element is expected to send a message to XI.
In the procedure described in a quide I see no reference to an ABAP class (that I have defined in a certain step)
Please advice

Tere was wrong (default) abap class assigment in other types entry definition

Error while sending a message 501 not implemented

Hi all,
running some tests checking some Xi interfaces we have the following problem :
going to Runtime Workbench --> Component Monitoring --> Adapter Engine e clicking on the Tab "Test Message" we insert Service, Interface, Namespace, Quality of Service, user and password
On "send message to" we insert the string:
http://apl06gjbx:8031/XISOAPAdapter/MessageServlet?channel=:BSY_CDFS_CRISP_DX8:CC_SOAP_IF_KE_02_In
Executing "Send Message", we get the following error :
"error while sending message : 501 not implemented"
Any suggestion ?
thanks in advance

Hi all,
using a 53100 port and xml code in payload it seems better but we get the following error:
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
Display Stack Trace
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:328)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at jsp_FC_Secure1185456171353._jspService(jsp_FC_Secure1185456171353.java:24)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NullPointerException
     at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doProcessAfterInput(CmDynPage.java:60)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:101)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
     at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
     at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     ... 20 more

Error trying to send email -- IOException while sending message

Email is successful when:
I run my application through JDeveloper
or
when I use a classpath, but if I try to execute app via a jar file, i get the following error message: IOException while sending message.
The jar file does include mail.jar and activation.jar.
Below is my email code:
import java.util.*;
import javax.mail.*;
import javax.mail.internet.*;
public class JMAR_Mail {
private String sendTo;
private String sentFrom;
private String host;
private String messageSubject;
private String messageText;
private MimeMessage msg;
public JMAR_Mail() {}
public JMAR_Mail(String sendTo, String sentFrom, String _host) {
sendTo = _sendTo;
sentFrom = _sentFrom;
host = _host;
public void setEmailSubject(String _messageSubject) {
messageSubject = _messageSubject;
} // end setEmailSubject
public void setEmailText(String _text) {
messageText = _text;
public void sendEmail() throws MessagingException {
// create some properties and get the default Session
Properties props = System.getProperties();
props.put("mail.smtp.host", host);
Session session = Session.getInstance(props, null);
InternetAddress addr = new InternetAddress();
// parses comma separted list of email addresses
InternetAddress[] address = addr.parse(sendTo);
msg = new MimeMessage(session);
msg.setFrom(new InternetAddress(sentFrom));
msg.setSubject(messageSubject);
msg.setText(messageText);
msg.setRecipients(Message.RecipientType.TO, address);
msg.setSentDate(new Date());
Transport.send(msg);
} // end sendEmail
}

You don't want to include those jar files in your jar file,
you want to reference them:
http://forum.java.sun.com/thread.jspa?forumID=43&threadID=762763

I cant use imessages, it tells me that it had an error while sending a message

i cant use imessages, it tells me that it had an error while sending a message, but it can do all the other things.

I have a third generation iPod touch, newest software version, wifi is on, address in contacts, phone number in contacts. I can start to send a message, it gets close to the end and then fails to deliver. I have read the trouble shooting guide and followed all directions. I can send from my iPad just fine, but not the iPod. Any ideals?

File to RFC - error while processing message to remote system:com.sap.aii.

Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.

Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek

Error while sending data from XI to BI System

Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
Narendra

Hi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal

Error while sending email to external mail - Urgent

Hi All,
I am getting error while sending email with attachement. The Error code is 02.
I am not able to identify the error. bold Please help me in solving this problem.
Is it anything wrong with the code or Any Configuration with SCOT/SOST.bold
the code i am using is :
REPORT YVR_F MESSAGE-ID XX .
TABLES : EDIDC, EDIDS, EDPAR.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS : P_STATUS LIKE EDIDC-STATUS DEFAULT '51'.
SELECT-OPTIONS : S_DIRECT FOR EDIDC-DIRECT,
                 S_MESTYP FOR EDIDC-MESTYP,
                 S_CREDAT FOR EDIDC-CREDAT.
SELECTION-SCREEN END OF BLOCK B1 .
PARAMETER: P_EMAIL LIKE SOMLRECI1-RECEIVER,
           P_SENDER LIKE SOMLRECI1-RECEIVER no-display,
           P_DELSPL AS CHECKBOX,
           P_ONLINE NO-DISPLAY.
DATA : TB_EDIDC LIKE STANDARD TABLE OF EDIDC INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_EDPAR LIKE STANDARD TABLE OF EDPAR INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_KNA1 LIKE STANDARD TABLE OF KNA1 INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_ADRC LIKE STANDARD TABLE OF ADRC INITIAL SIZE 0 WITH HEADER
LINE.
DATA: INT_PDF TYPE TABLE OF TLINE WITH HEADER LINE.
DATA : BEGIN OF TB_ED OCCURS 0,
         SNDPRN LIKE EDIDC-SNDPRN,
         LOC    LIKE ADRC-BUILDING,
         DOCNUM LIKE EDIDC-DOCNUM,
         IDOCTP LIKE EDIDC-IDOCTP,
         MESTYP LIKE EDIDC-MESTYP,
         DIRECT LIKE EDIDC-DIRECT,
         CREDAT LIKE EDIDC-CREDAT,
         STATUS LIKE EDIDC-STATUS,
       END OF TB_ED.
DATA:   IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
                WITH HEADER LINE.
Job Runtime Parameters
DATA: GD_EVENTID LIKE TBTCM-EVENTID,
      GD_EVENTPARM LIKE TBTCM-EVENTPARM,
      GD_EXTERNAL_PROGRAM_ACTIVE LIKE TBTCM-XPGACTIVE,
      GD_JOBCOUNT LIKE TBTCM-JOBCOUNT,
      GD_JOBNAME LIKE TBTCM-JOBNAME,
      GD_STEPCOUNT LIKE TBTCM-STEPCOUNT,
      GD_ERROR    TYPE SY-SUBRC,
      GD_RECIEVER TYPE SY-SUBRC.
DATA: W_RECSIZE TYPE I,
       W_SPOOL_NR LIKE SY-SPONO.
      %_print LIKE pri_params.
DATA: GD_SUBJECT   LIKE SODOCCHGI1-OBJ_DESCR,
      IT_MESS_BOD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
      IT_MESS_ATT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
      GD_SENDER_TYPE     LIKE SOEXTRECI1-ADR_TYP,
      GD_ATTACHMENT_DESC TYPE SO_OBJ_NAM,
      GD_ATTACHMENT_NAME TYPE SO_OBJ_DES.
Spool to PDF conversions
DATA: GD_SPOOL_NR LIKE TSP01-RQIDENT,
      GD_DESTINATION LIKE RLGRAP-FILENAME,
      GD_BYTECOUNT LIKE TST01-DSIZE,
      GD_BUFFER TYPE STRING.
Binary store for PDF
DATA: BEGIN OF IT_PDF_OUTPUT OCCURS 0.
        INCLUDE STRUCTURE TLINE.
DATA: END OF IT_PDF_OUTPUT.
DATA: GD_RECSIZE TYPE I.
CONSTANTS: C_DEV LIKE SY-SYSID VALUE 'DEV',
           C_NO(1)     TYPE C   VALUE ' ',
           C_DEVICE(4) TYPE C   VALUE 'LOCL'.
DATA:   T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
        T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
        T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        W_CNT TYPE I,
        W_SENT_ALL(1) TYPE C,
        W_DOC_DATA LIKE SODOCCHGI1.
DATA : MSTR_PRINT_PARMS LIKE PRI_PARAMS,
       MC_VALID,
       P_REPID LIKE SY-REPID,
       WF_ID LIKE TSP01-RQIDENT,
       LOC_BYTECOUNT TYPE I.
*start-of-selection.
MSTR_PRINT_PARMS-PDEST = 'LOCL'.
P_REPID = SY-REPID.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    authority= ' '
   COPIES                       = '1'
   COVER_PAGE                   = SPACE
   DATA_SET                     = SPACE
   DEPARTMENT                   = SPACE
   DESTINATION                  = 'LP01'
   EXPIRATION                   = '1'
   IMMEDIATELY                  = 'X'
   LAYOUT                       = 'X_65_132'
   MODE                         = SPACE
   NEW_LIST_ID                  = 'X'
   NO_DIALOG                    = 'X'
   USER                         = SY-UNAME
IMPORTING
   OUT_PARAMETERS               = MSTR_PRINT_PARMS
   VALID                        = MC_VALID
EXCEPTIONS
   ARCHIVE_INFO_NOT_FOUND       = 1
   INVALID_PRINT_PARAMS         = 2
   INVALID_ARCHIVE_PARAMS       = 3
   OTHERS                       = 4.
     SUBMIT (P_REPID) TO SAP-SPOOL WITHOUT SPOOL DYNPRO
                      SPOOL PARAMETERS MSTR_PRINT_PARMS.
                      AND RETURN.
NEW-PAGE PRINT ON NO DIALOG PARAMETERS
MSTR_PRINT_PARMS.
perform data.
NEW-PAGE PRINT OFF. "This marks the end of the screen for which the
*SPOOL NO WAS GENERATED.
WF_ID = SY-SPONO.
*converting spool to pdf
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
     EXPORTING
          SRC_SPOOLID              = WF_ID "SPOOL NUMBER
          NO_DIALOG                = SPACE
          PDF_DESTINATION          = 'X'
     IMPORTING
          PDF_BYTECOUNT =
             LOC_BYTECOUNT "NUMBER OF BYTES TRANSFERRED
     TABLES
          PDF                      = INT_PDF "TABLE FOR PDF REPORT
     EXCEPTIONS
          ERR_NO_ABAP_SPOOLJOB     = 1
          ERR_NO_SPOOLJOB          = 2
          ERR_NO_PERMISSION        = 3
          ERR_CONV_NOT_POSSIBLE    = 4
          ERR_BAD_DESTDEVICE       = 5
          USER_CANCELLED           = 6
          ERR_SPOOLERROR           = 7
          ERR_TEMSEERROR           = 8
          ERR_BTCJOB_OPEN_FAILED   = 9
          ERR_BTCJOB_SUBMIT_FAILED = 10
          ERR_BTCJOB_CLOSE_FAILED = 11
          OTHERS                   = 12.
*CALL FUNCTION 'DOWNLOAD'
*EXPORTING
*bin_filesize = loc_bytecount "NO. OF BYTES
*filename = 'C:/EMAILPDF.PDF'
*filetype = 'BIN'
**IMPORTING
**act_filename = loc_filename
*TABLES
*data_tab = int_pdf.
IF P_DELSPL EQ 'X'.
PERFORM DELETE_SPOOL.
ENDIF.
Transfer the 132-long strings to 255-long strings
LOOP AT INT_PDF.
TRANSLATE INT_PDF USING ' ~'.
CONCATENATE GD_BUFFER INT_PDF INTO GD_BUFFER.
ENDLOOP.
TRANSLATE GD_BUFFER USING '~ '.
DO.
IT_MESS_ATT = GD_BUFFER.
APPEND IT_MESS_ATT.
SHIFT GD_BUFFER LEFT BY 255 PLACES.
IF GD_BUFFER IS INITIAL.
    EXIT.
ENDIF.
ENDDO.
DESCRIBE TABLE IT_MESS_ATT LINES GD_RECSIZE.
CHECK GD_RECSIZE > 0.
PERFORM SENDMAIL USING P_EMAIL..
*&      Form sendmail
      text
--> p1        text
<-- p2        text
FORM SENDMAIL USING P_EMAIL.
CHECK NOT ( P_EMAIL IS INITIAL ).
REFRESH IT_MESS_BOD.
Default subject matter
GD_SUBJECT         = 'Subject'.
GD_ATTACHMENT_DESC = 'IDOC LIST'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
IT_MESS_BOD        = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
IT_MESS_BOD        = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
If no sender specified - default blank
IF P_SENDER EQ SPACE.
    GD_SENDER_TYPE = SPACE.
ELSE.
    GD_SENDER_TYPE = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
                               TABLES IT_MESS_BOD
                                      IT_MESS_ATT
                                USING P_EMAIL
                                      'Document attachment'
                                      'PDF'
                                      GD_ATTACHMENT_NAME
                                      GD_ATTACHMENT_DESC
                                      P_SENDER
                                      GD_SENDER_TYPE
                             CHANGING GD_ERROR
                                      GD_RECIEVER.
ENDFORM.                    " sendmail
*&      Form DELETE_SPOOL
      text
--> p1        text
<-- p2        text
FORM DELETE_SPOOL.
DATA: LD_SPOOL_NR TYPE TSP01_SP0R-RQID_CHAR.
LD_SPOOL_NR = WF_ID.   "GD_SPOOL_NR.
CHECK P_DELSPL <> C_NO.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
       EXPORTING
            SPOOLID = LD_SPOOL_NR.
ENDFORM.                    " DELETE_SPOOL
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      text
     -->P_IT_MESS_BOD text
     -->P_IT_MESS_ATT text
     -->P_P_EMAIL text
     -->P_0846   text
     -->P_0847   text
     -->P_GD_ATTACHMENT_NAME text
     -->P_GD_ATTACHMENT_DESC text
     -->P_P_SENDER text
     -->P_GD_SENDER_TYPE text
     <--P_GD_ERROR text
     <--P_GD_RECIEVER text
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES   IT_MESSAGE
                                          IT_ATTACH
                                    USING P_EMAIL
                                          P_MTITLE
                                          P_FORMAT
                                          P_FILENAME
                                          P_ATTDESCRIPTION
                                          P_SENDER_ADDRESS
                                          P_SENDER_ADDRES_TYPE
                                 CHANGING P_ERROR
                                          P_RECIEVER.
DATA: LD_ERROR    TYPE SY-SUBRC,
         LD_RECIEVER TYPE SY-SUBRC,
         LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
         LD_EMAIL LIKE SOMLRECI1-RECEIVER,
         LD_FORMAT TYPE SO_OBJ_TP ,
         LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
         LD_ATTFILENAME TYPE SO_OBJ_DES ,
         LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
         LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
         LD_RECEIVER LIKE SY-SUBRC.
DATA:   T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
          T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
          T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          W_CNT TYPE I,
          W_SENT_ALL(1) TYPE C,
          W_DOC_DATA LIKE SODOCCHGI1.
LD_EMAIL   = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT              = P_FORMAT.
LD_ATTDESCRIPTION      = P_ATTDESCRIPTION.
LD_ATTFILENAME         = P_FILENAME.
LD_SENDER_ADDRESS      = P_SENDER.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
     ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME   = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = IT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM   = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE   = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME   = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE   = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = p_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
W_SENT_ALL = 'X'.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = W_DOC_DATA
            PUT_IN_OUTBOX              = 'X'
           SENDER_ADDRESS             = LD_SENDER_ADDRESS
           SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
            COMMIT_WORK                = 'X'
       IMPORTING
            SENT_TO_ALL                = W_SENT_ALL
       TABLES
            PACKING_LIST               = T_PACKING_LIST
            object_header              = objhead
            CONTENTS_BIN               = T_ATTACHMENT
            CONTENTS_TXT               = IT_MESSAGE
            RECEIVERS                  = T_RECEIVERS
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            OPERATION_NO_AUTHORIZATION = 4
            OTHERS                     = 99.
IF SY-SUBRC NE 0.
    MESSAGE E000 WITH 'Error occurred while sending'.
ELSE.
    MESSAGE I000 WITH 'The document was sent'.
ENDIF.
ENDFORM.                    " SEND_FILE_AS_EMAIL_ATTACHMENT
*&      Form data
      text
--> p1        text
<-- p2        text
FORM data.
SELECT SNDPRN
         DOCNUM
         IDOCTP
         MESTYP
         DIRECT
         CREDAT
         STATUS
         FROM EDIDC
         INTO CORRESPONDING FIELDS
         OF TABLE TB_EDIDC
         WHERE STATUS = P_STATUS
         AND MESTYP IN S_MESTYP
         AND DIRECT IN S_DIRECT
         AND CREDAT IN S_CREDAT.
SELECT KUNNR
       INPNR
       FROM EDPAR
       INTO CORRESPONDING FIELDS
       OF TABLE TB_EDPAR
       FOR ALL ENTRIES IN TB_EDIDC
       WHERE KUNNR = TB_EDIDC-SNDPRN.
SELECT KUNNR
       ADRNR
       FROM KNA1
       INTO CORRESPONDING FIELDS
       OF TABLE TB_KNA1
       FOR ALL ENTRIES IN TB_EDPAR
       WHERE KUNNR = TB_EDPAR-INPNR.
SELECT ADDRNUMBER
       BUILDING
       FROM ADRC
       INTO CORRESPONDING FIELDS
       OF TABLE TB_ADRC
       FOR ALL ENTRIES IN TB_KNA1
       WHERE ADDRNUMBER = TB_KNA1-ADRNR.
LOOP AT TB_EDIDC WHERE STATUS = P_STATUS
                 AND MESTYP IN S_MESTYP
                 AND DIRECT IN S_DIRECT
                 AND CREDAT IN S_CREDAT.
TB_ED-SNDPRN = TB_EDIDC-SNDPRN.
TB_ED-DOCNUM = TB_EDIDC-DOCNUM.
TB_ED-IDOCTP = TB_EDIDC-IDOCTP.
TB_ED-MESTYP = TB_EDIDC-MESTYP.
TB_ED-DIRECT = TB_EDIDC-DIRECT.
TB_ED-CREDAT = TB_EDIDC-CREDAT.
TB_ED-STATUS = TB_EDIDC-STATUS.
READ TABLE TB_EDPAR WITH KEY KUNNR = TB_EDIDC-SNDPRN.
READ TABLE TB_KNA1 WITH KEY KUNNR = TB_EDPAR-INPNR.
READ TABLE TB_ADRC WITH KEY ADDRNUMBER = TB_KNA1-ADRNR.
TB_ED-LOC = TB_ADRC-BUILDING.
APPEND TB_ED.
ENDLOOP.
WRITE :/02 'CustomerNo',
        15 'Location Code',
        30 'Idoc Number',
        55 'Basic Type',
        70 'Message Type',
        95 'Direction',
        110 'Received Date',
        130 'Status'.
ULINE.
LOOP AT TB_ED.
WRITE :/02 TB_ED-SNDPRN,
          15 TB_ED-LOC,
          30 TB_ED-DOCNUM,
          55 TB_ED-IDOCTP,
          70 TB_ED-MESTYP,
          95 TB_ED-DIRECT,
          110 TB_ED-CREDAT,
          130 TB_ED-STATUS.
ENDLOOP.
ENDFORM.                    " data
Kindly help me in solving the issue.
Thanks in advance.
Suki.

Hi,
Check in transaction SCOT. If your mail is in error status in SCOT, you can assure that there is no problem with your code. If your message has not reached till SCOT, then the problem will be with the code.
If the mail is there in scot with error status tell the BASIS to configure it. I feel this could be the problem.
Regards,
Renjith Michael.

INVALID_QUEUE_NAME : Error while scheduling message using qRFC

Hello SDNers
We are currently performing our PI 7.1 upgrade and one of our scenario uses a Sender SOAP of the type EOIO. We tried executing this scenario in PI 7.1 XID environment and in it worked fine without any errors but in our PI 7.1 QA environment it is giving the following errors
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SCHEDULE_ERROR</SAP:Code>
<SAP:P1>XBQOC___*</SAP:P1>
<SAP:P2>INVALID_QUEUE_NAME</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while scheduling message using qRFC (queue name = XBQOC___*, exception = INVALID_QUEUE_NAME)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can you please exaplian what could be the issue we are facing.
Thanks.
Kiran
Edited by: Kiran Sakhardande on Oct 22, 2008 4:08 PM

HI Kiran,
Have gone throgh the following link?
INVALID_QUEUE_NAME
Regards
Sridhar Goli

Error while processing message payload Element 'CategoryCode&#39

Hi Experts,
I am trying to integrate SAP ECC with TM. I have transferred the sales order from ECC to TM, but its not triggering order based transportation requirement (OTR) instead giving an error Error while processing message payload Element 'CategoryCode&#39 and all the xml messages are stuck in inbound queue. The screen shot of the issue is as appended herewith. Please advise.
Thanks & Regards,
Aunkur De

Hi Aunkur,
The issue will generally come when a mandatory field in XML which you are not sending either or missed.
Please check if all mandatory fields are mapped properly.
Best regards,
Rohit

Error while sending message.

Similar Messages

Maybe you are looking for