Error while sending SOAP message to PI
Hi Guyz,
I have a sync-asyn scneario SOAP to File via PI. When I test the scenario using test tool i.e SOAP UI , scenario runs fine. But when user is trying to send a message they are getting Error message as response . "No SOAP Envelope but 1 {}.
Any idea what is this error. I tried to test the scenario with the same XML message that they are using.
Regards,
Loveena.
Hi Loveena,
What kind of application tries to connect with PI?
Have you tried to mark Use No SOAP Envelope (Point 4. https://help.sap.com/saphelp_nw73/helpdata/en/48/3555240bea31c3e10000000a42189d/frameset.htm)?, in this way you can check that the message at least comes to PI.
Regards.
Similar Messages
-
I cant use imessages, it tells me that it had an error while sending a message
i cant use imessages, it tells me that it had an error while sending a message, but it can do all the other things.
I have a third generation iPod touch, newest software version, wifi is on, address in contacts, phone number in contacts. I can start to send a message, it gets close to the end and then fails to deliver. I have read the trouble shooting guide and followed all directions. I can send from my iPad just fine, but not the iPod. Any ideals?
-
Error while posting SOAP message
I am trying to post a SOAP message but I keep getting this error. Can anybody help me on this. I tried using ALTOVA spy and SOAP Ui but the result is the same error.
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
<text><![CDATA[
com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve binding for the given channelId: Binding:CID=null;
* at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBindingByChannelId*(AbstractLookupManager.java:173)
at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:431)
Scenario is SOAP Sender and IDOC reciever.I tried reconfiguring also.
When I test from Integration Engine in RWB using the test message it is sucsseful. Infact I can see the IDOC too.
But when the basis guy tested with Adapter engine in RWB using the test tool, it gives the following error:
Error While Sending Message: Additional error text from response: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=BusComp_Siebel1;TS=;AN=SI_Sales_Order_OB_Async;ANS=http://trm.com:o2b:SalesOrderCreate; in the current context [Unknown].
Any idea where is the problem.
When we tried the WSN step we are facing this error in the very first step.
WSDL1.1, WSDL 2.0 definition element expected. Found [html: null] .
Edited by: Chandra Gunapati on Oct 7, 2009 10:00 PM -
Error while sending a message 501 not implemented
Hi all,
running some tests checking some Xi interfaces we have the following problem :
going to Runtime Workbench --> Component Monitoring --> Adapter Engine e clicking on the Tab "Test Message" we insert Service, Interface, Namespace, Quality of Service, user and password
On "send message to" we insert the string:
http://apl06gjbx:8031/XISOAPAdapter/MessageServlet?channel=:BSY_CDFS_CRISP_DX8:CC_SOAP_IF_KE_02_In
Executing "Send Message", we get the following error :
"error while sending message : 501 not implemented"
Any suggestion ?
thanks in advanceHi all,
using a 53100 port and xml code in payload it seems better but we get the following error:
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
Display Stack Trace
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:328)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at jsp_FC_Secure1185456171353._jspService(jsp_FC_Secure1185456171353.java:24)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NullPointerException
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doProcessAfterInput(CmDynPage.java:60)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:101)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
... 20 more -
HTTP error while sending SOAP request using wsdl file
We created SOAP request using the wsdl file ; while sending SOAP request from Altova XMLSpy, we are getting the below error.
HTTP error: could not post file
Can you please explain how to resolve this issue
Regards,
Sanghamitrathere is very little information to help you here.
Can you confirm if this is a SOAP sender scenario or SOAP receiver scenario?
Also do go to thru these links to help you out;
Troubleshooting
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> SOAP
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
SOAP <-> XI <-> RFC/BAPI
Walkthrough - SOAP XI RFC/BAPI -
Error while sending the messages to JMS Queue
Hi ,
I am trying to pick the file from JMS Queue and send the response xml as outbound message to JMS Queue again using XAI Sender
I Created XAI Sender, Outbound Message Type(DM-RCVRESP) and configured these two with External System.
I am able to pick the file from JMS Queue but unable to send the message through XAI Sender (Real-time)
Plz find below the error trace getting.
[Wed Jun 15 16:12:09 IST 2011] Error while processing sender "UPLOADSTG" : Unable to update response in staging table: Row id not given.
com.splwg.mpl.sending.SameThreadSendingManager$ProcessException
at com.splwg.mpl.sending.SameThreadSendingManager.processDestination(SameThreadSendingManager.java:341)
at com.splwg.mpl.sending.SameThreadSendingManager.sendResponse(SameThreadSendingManager.java:293)
at com.splwg.mpl.sending.SameThreadSendingManager.doSend(SameThreadSendingManager.java:249)
at com.splwg.mpl.server.async.ExecSendRequestProcessor.ProcessRequest(ExecSendRequestProcessor.java:61)
at com.splwg.mpl.server.async.RequestProcessingThreadAdapter.run(RequestProcessingThreadAdapter.java:46)
at com.splwg.mpl.server.PooledThread.run(PooledThread.java:91)
at java.lang.Thread.run(Thread.java:662)
Please guide me in this regard..
Thanks,
sukumarWhat have you configured for the response tab for the sender? Are you using the MPL or the MDB?
Take a look at:
MPL Best Practices (Doc Id 1308165.1)
Oracle WebLogic JMS Integration (Doc Id: 1308181.1) -
Error while sending SOAP Request to server through XML Spy
i have created a webservice to jdbc scenario application and when i tried to check my webservice with XML Spy by giving inputs to wsdl file as SOAP Request to server, its showing the error like this:
<b><u>Http error : could not POST File</u></b>
It would be good if u explain step by step procedure how to solve the issue.
Thanks & Regards.,
Pushparaju.BThis is the error showing after clicking OK button after it showed the error
Http error : could not POST File
<b><?xml version="1.0"?>
<!-- see the documentation -->
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>DeliveryException</code>
<text><![CDATA[
com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:PL_TIMEOUT:
at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:451)
at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:125)
at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:831)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope></b>
yes i have the role of XIAPPLUSER
scenario has created by me and i have the authorization to enter into XI -
SOAP Receiver- Error While Sending Message: 500 Internal Server Error
Hello,
Our scenario: IDoc to SOAP
I have added a third party system in the SLD and have used the same in my ID configuration.
An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
I have tested the scenario in ID from Interface Determination and its successful.
But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
"Error while sending message:500 Internal server error"
If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
Regards,
AbhishekHello,
Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
http://host:port/sap/xi/engine?type=entry
Also check your firewall settings from PI to the third-party system.
Hope this helps,
Mark
Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM -
Error while sending message.
Hi,Could anyone explain the below error message and tell me how can we solve this?
Error while sending message: com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=NDE_CLNT200;TS=;AN=Z_FI_OUTBOUND_SAP_TO_SIP;ANS=urn:sap-com:document:sap:rfc:functions;
Regards,
sai.Hello,
I have the same problem here. I already did many times redefine the wohle szenario and also tried out many different adapters. But any time I get the same error message. I checked the agreements and determinations very carefully. The Test in IDR said this:
Senderagreement
<not found>
<Trace level="1" type="B">SENDER AGREEMENT SIMULATION</Trace> <Trace level="1" type="T">Simulating Adapter Engine...</Trace> <Trace level="1" type="T">Simply trying to loolup for the most specific Sender Agreement object</Trace> <Trace level="1" type="T">no objects found</Trace> <Trace level="1" type="T">Note that real results may differ</Trace>
Receiverdetermination
| BusSys_A | MI_HTTPtoJDBC_HTTP
<Trace level="1" type="B">CL_RD_PLSRV-ENTER_PLSRV</Trace>... (4 Zeilen)
Interface-determination
| BusSys_A | MI_HTTPtoJDBC_HTTP | | BusSys_B
<Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>... (4 Zeilen)
Interface-Mapping
<not found>
Runtimeerror
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_HTTPtoJDBC_Input_: RuntimeException in Message-Mapping transformatio~
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>... (152 Zeilen)
I hope you can help me getting it working. thank you -
Error 401 while sending SOAP Request to XI
hi friend ..
i am getting Error 401 while sending SOAP Request to XI..
can u suggest me where may be the error?
thanks..Hi,
Refer these threads:
Testing XI SOAP scenario via XMLSpy
Re: SOAP Sender ADAPTER 401 No Authorisation
Re: XI Web Service - Code: (401) Unauthorized.
Try soap client https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9b16d790-0201-0010-4e9b-baa5f42830d8
Regards
Suraj -
" Error while sending message: 500 Internal Server Error" RNIF Adapter
Hi,
I have configured B2B integration as Sender : RNIF adapter & Receiver: XI Adapter.
I am able to test the configuration successfully in ESR and ID. But, whille testing with RWB using same test data, i am getting the following error:
Error while sending message: 500 Internal Server Errot.
Could you anybody help me, what could be the reason? Even i am not getting any error messages in SXMB_MONI.
Thanks
LaxmanHope this helps..
-Is the 500 internal SErver Error in RWB is only for this issue and the message is successfully processed in SXMB_MONI?
Could be the PI Service User :PIAFUSER(Adapter framework user) login crendential issue or run out time error.
Try taking the payload from sxmb_moni and enter it in RWB > Adater engine> Test Message Tab > give proper sender interface information , enter payload and try sending message. check what is behaviour -
Imp: Error while sending message: 500 Internal Server Error
Hi all
while testing my scenarios- by sending the message through component monitoring in RWB I get the following error in Integration Server
<b>"Error while sending message: 500 Internal Server Error "</b>
It seems that integration server is not picking up the messages.
Can anyone help me on this?
thanks
AbhishekHi Abhishek,
Check whether the integration url is pointing to correct one something like http://host url:http port/sap/xi/engine?type=entry.
Please do refer the below blog:
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Prasanthi. -
An error occurred while sending the message
I compose a email.When I click the send link ,an error occurs. The error page said "An error occurred while sending the message". Could anybody tell me what's wrong. Thanks.
Hi,
lsnrctl is not not able to start listener running on ports < 1024. Try starting the listener with the tnslsnr tool directly. My recommendation is to start it as root directly, so you don't have to set the s-bit.
<midtier_home>/bin/tnslsnr listener_es -u <uid> -g <grpid> &
Regards
Christian -
Error while sending data from XI to BI System
Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
NarendraHi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal -
Error while sending email to external mail - Urgent
Hi All,
I am getting error while sending email with attachement. The Error code is 02.
I am not able to identify the error. bold Please help me in solving this problem.
Is it anything wrong with the code or Any Configuration with SCOT/SOST.bold
the code i am using is :
REPORT YVR_F MESSAGE-ID XX .
TABLES : EDIDC, EDIDS, EDPAR.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS : P_STATUS LIKE EDIDC-STATUS DEFAULT '51'.
SELECT-OPTIONS : S_DIRECT FOR EDIDC-DIRECT,
S_MESTYP FOR EDIDC-MESTYP,
S_CREDAT FOR EDIDC-CREDAT.
SELECTION-SCREEN END OF BLOCK B1 .
PARAMETER: P_EMAIL LIKE SOMLRECI1-RECEIVER,
P_SENDER LIKE SOMLRECI1-RECEIVER no-display,
P_DELSPL AS CHECKBOX,
P_ONLINE NO-DISPLAY.
DATA : TB_EDIDC LIKE STANDARD TABLE OF EDIDC INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_EDPAR LIKE STANDARD TABLE OF EDPAR INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_KNA1 LIKE STANDARD TABLE OF KNA1 INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_ADRC LIKE STANDARD TABLE OF ADRC INITIAL SIZE 0 WITH HEADER
LINE.
DATA: INT_PDF TYPE TABLE OF TLINE WITH HEADER LINE.
DATA : BEGIN OF TB_ED OCCURS 0,
SNDPRN LIKE EDIDC-SNDPRN,
LOC LIKE ADRC-BUILDING,
DOCNUM LIKE EDIDC-DOCNUM,
IDOCTP LIKE EDIDC-IDOCTP,
MESTYP LIKE EDIDC-MESTYP,
DIRECT LIKE EDIDC-DIRECT,
CREDAT LIKE EDIDC-CREDAT,
STATUS LIKE EDIDC-STATUS,
END OF TB_ED.
DATA: IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
Job Runtime Parameters
DATA: GD_EVENTID LIKE TBTCM-EVENTID,
GD_EVENTPARM LIKE TBTCM-EVENTPARM,
GD_EXTERNAL_PROGRAM_ACTIVE LIKE TBTCM-XPGACTIVE,
GD_JOBCOUNT LIKE TBTCM-JOBCOUNT,
GD_JOBNAME LIKE TBTCM-JOBNAME,
GD_STEPCOUNT LIKE TBTCM-STEPCOUNT,
GD_ERROR TYPE SY-SUBRC,
GD_RECIEVER TYPE SY-SUBRC.
DATA: W_RECSIZE TYPE I,
W_SPOOL_NR LIKE SY-SPONO.
%_print LIKE pri_params.
DATA: GD_SUBJECT LIKE SODOCCHGI1-OBJ_DESCR,
IT_MESS_BOD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
IT_MESS_ATT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
GD_SENDER_TYPE LIKE SOEXTRECI1-ADR_TYP,
GD_ATTACHMENT_DESC TYPE SO_OBJ_NAM,
GD_ATTACHMENT_NAME TYPE SO_OBJ_DES.
Spool to PDF conversions
DATA: GD_SPOOL_NR LIKE TSP01-RQIDENT,
GD_DESTINATION LIKE RLGRAP-FILENAME,
GD_BYTECOUNT LIKE TST01-DSIZE,
GD_BUFFER TYPE STRING.
Binary store for PDF
DATA: BEGIN OF IT_PDF_OUTPUT OCCURS 0.
INCLUDE STRUCTURE TLINE.
DATA: END OF IT_PDF_OUTPUT.
DATA: GD_RECSIZE TYPE I.
CONSTANTS: C_DEV LIKE SY-SYSID VALUE 'DEV',
C_NO(1) TYPE C VALUE ' ',
C_DEVICE(4) TYPE C VALUE 'LOCL'.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1.
DATA : MSTR_PRINT_PARMS LIKE PRI_PARAMS,
MC_VALID,
P_REPID LIKE SY-REPID,
WF_ID LIKE TSP01-RQIDENT,
LOC_BYTECOUNT TYPE I.
*start-of-selection.
MSTR_PRINT_PARMS-PDEST = 'LOCL'.
P_REPID = SY-REPID.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
authority= ' '
COPIES = '1'
COVER_PAGE = SPACE
DATA_SET = SPACE
DEPARTMENT = SPACE
DESTINATION = 'LP01'
EXPIRATION = '1'
IMMEDIATELY = 'X'
LAYOUT = 'X_65_132'
MODE = SPACE
NEW_LIST_ID = 'X'
NO_DIALOG = 'X'
USER = SY-UNAME
IMPORTING
OUT_PARAMETERS = MSTR_PRINT_PARMS
VALID = MC_VALID
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4.
SUBMIT (P_REPID) TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS MSTR_PRINT_PARMS.
AND RETURN.
NEW-PAGE PRINT ON NO DIALOG PARAMETERS
MSTR_PRINT_PARMS.
perform data.
NEW-PAGE PRINT OFF. "This marks the end of the screen for which the
*SPOOL NO WAS GENERATED.
WF_ID = SY-SPONO.
*converting spool to pdf
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = WF_ID "SPOOL NUMBER
NO_DIALOG = SPACE
PDF_DESTINATION = 'X'
IMPORTING
PDF_BYTECOUNT =
LOC_BYTECOUNT "NUMBER OF BYTES TRANSFERRED
TABLES
PDF = INT_PDF "TABLE FOR PDF REPORT
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12.
*CALL FUNCTION 'DOWNLOAD'
*EXPORTING
*bin_filesize = loc_bytecount "NO. OF BYTES
*filename = 'C:/EMAILPDF.PDF'
*filetype = 'BIN'
**IMPORTING
**act_filename = loc_filename
*TABLES
*data_tab = int_pdf.
IF P_DELSPL EQ 'X'.
PERFORM DELETE_SPOOL.
ENDIF.
Transfer the 132-long strings to 255-long strings
LOOP AT INT_PDF.
TRANSLATE INT_PDF USING ' ~'.
CONCATENATE GD_BUFFER INT_PDF INTO GD_BUFFER.
ENDLOOP.
TRANSLATE GD_BUFFER USING '~ '.
DO.
IT_MESS_ATT = GD_BUFFER.
APPEND IT_MESS_ATT.
SHIFT GD_BUFFER LEFT BY 255 PLACES.
IF GD_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
DESCRIBE TABLE IT_MESS_ATT LINES GD_RECSIZE.
CHECK GD_RECSIZE > 0.
PERFORM SENDMAIL USING P_EMAIL..
*& Form sendmail
text
--> p1 text
<-- p2 text
FORM SENDMAIL USING P_EMAIL.
CHECK NOT ( P_EMAIL IS INITIAL ).
REFRESH IT_MESS_BOD.
Default subject matter
GD_SUBJECT = 'Subject'.
GD_ATTACHMENT_DESC = 'IDOC LIST'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
If no sender specified - default blank
IF P_SENDER EQ SPACE.
GD_SENDER_TYPE = SPACE.
ELSE.
GD_SENDER_TYPE = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESS_BOD
IT_MESS_ATT
USING P_EMAIL
'Document attachment'
'PDF'
GD_ATTACHMENT_NAME
GD_ATTACHMENT_DESC
P_SENDER
GD_SENDER_TYPE
CHANGING GD_ERROR
GD_RECIEVER.
ENDFORM. " sendmail
*& Form DELETE_SPOOL
text
--> p1 text
<-- p2 text
FORM DELETE_SPOOL.
DATA: LD_SPOOL_NR TYPE TSP01_SP0R-RQID_CHAR.
LD_SPOOL_NR = WF_ID. "GD_SPOOL_NR.
CHECK P_DELSPL <> C_NO.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
SPOOLID = LD_SPOOL_NR.
ENDFORM. " DELETE_SPOOL
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
text
-->P_IT_MESS_BOD text
-->P_IT_MESS_ATT text
-->P_P_EMAIL text
-->P_0846 text
-->P_0847 text
-->P_GD_ATTACHMENT_NAME text
-->P_GD_ATTACHMENT_DESC text
-->P_P_SENDER text
-->P_GD_SENDER_TYPE text
<--P_GD_ERROR text
<--P_GD_RECIEVER text
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = IT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = p_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
W_SENT_ALL = 'X'.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
object_header = objhead
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
IF SY-SUBRC NE 0.
MESSAGE E000 WITH 'Error occurred while sending'.
ELSE.
MESSAGE I000 WITH 'The document was sent'.
ENDIF.
ENDFORM. " SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form data
text
--> p1 text
<-- p2 text
FORM data.
SELECT SNDPRN
DOCNUM
IDOCTP
MESTYP
DIRECT
CREDAT
STATUS
FROM EDIDC
INTO CORRESPONDING FIELDS
OF TABLE TB_EDIDC
WHERE STATUS = P_STATUS
AND MESTYP IN S_MESTYP
AND DIRECT IN S_DIRECT
AND CREDAT IN S_CREDAT.
SELECT KUNNR
INPNR
FROM EDPAR
INTO CORRESPONDING FIELDS
OF TABLE TB_EDPAR
FOR ALL ENTRIES IN TB_EDIDC
WHERE KUNNR = TB_EDIDC-SNDPRN.
SELECT KUNNR
ADRNR
FROM KNA1
INTO CORRESPONDING FIELDS
OF TABLE TB_KNA1
FOR ALL ENTRIES IN TB_EDPAR
WHERE KUNNR = TB_EDPAR-INPNR.
SELECT ADDRNUMBER
BUILDING
FROM ADRC
INTO CORRESPONDING FIELDS
OF TABLE TB_ADRC
FOR ALL ENTRIES IN TB_KNA1
WHERE ADDRNUMBER = TB_KNA1-ADRNR.
LOOP AT TB_EDIDC WHERE STATUS = P_STATUS
AND MESTYP IN S_MESTYP
AND DIRECT IN S_DIRECT
AND CREDAT IN S_CREDAT.
TB_ED-SNDPRN = TB_EDIDC-SNDPRN.
TB_ED-DOCNUM = TB_EDIDC-DOCNUM.
TB_ED-IDOCTP = TB_EDIDC-IDOCTP.
TB_ED-MESTYP = TB_EDIDC-MESTYP.
TB_ED-DIRECT = TB_EDIDC-DIRECT.
TB_ED-CREDAT = TB_EDIDC-CREDAT.
TB_ED-STATUS = TB_EDIDC-STATUS.
READ TABLE TB_EDPAR WITH KEY KUNNR = TB_EDIDC-SNDPRN.
READ TABLE TB_KNA1 WITH KEY KUNNR = TB_EDPAR-INPNR.
READ TABLE TB_ADRC WITH KEY ADDRNUMBER = TB_KNA1-ADRNR.
TB_ED-LOC = TB_ADRC-BUILDING.
APPEND TB_ED.
ENDLOOP.
WRITE :/02 'CustomerNo',
15 'Location Code',
30 'Idoc Number',
55 'Basic Type',
70 'Message Type',
95 'Direction',
110 'Received Date',
130 'Status'.
ULINE.
LOOP AT TB_ED.
WRITE :/02 TB_ED-SNDPRN,
15 TB_ED-LOC,
30 TB_ED-DOCNUM,
55 TB_ED-IDOCTP,
70 TB_ED-MESTYP,
95 TB_ED-DIRECT,
110 TB_ED-CREDAT,
130 TB_ED-STATUS.
ENDLOOP.
ENDFORM. " data
Kindly help me in solving the issue.
Thanks in advance.
Suki.Hi,
Check in transaction SCOT. If your mail is in error status in SCOT, you can assure that there is no problem with your code. If your message has not reached till SCOT, then the problem will be with the code.
If the mail is there in scot with error status tell the BASIS to configure it. I feel this could be the problem.
Regards,
Renjith Michael.
Maybe you are looking for
-
Upgrading MacBook Pro (OS 10.6.8) to Yosemite
Can I upgrade my 2008 MacBook Pro (Snow Leopard 10.6.8.) with Yosemite? I was advised not to as it would substantially slow down my hard drive.
-
TM - External Disk Drive Not Detected in Recovery Mode
Hello Apple Lovers, I am using the My Passport for Mac 500GB disk drive with time machine on my MacBook Air to create data backups. I checked the disk for any corruption using Disk Utility. No issues were found. I find the disk works excellantly in t
-
5th gen itunes problem, please help
I have an ipod touch 5th generation that I just got today, It was working right out of the box and i synced everything up, I already updated the software to 6.0.1. Then after I do that, I am prompted to update to software 6.0.1 because my software i
-
Pass ship-to-ctry to BAPI_ACC_DOCUMENT_POST
Hello, I have a requirement to pass ship-to-country to BAPI_ACC_DOCUMENT_POST. I do not see ship-to-country in any of the tables, nor in the table provided for update by the user exit. Does anyone know how to do this? Thanks in advance for your hel
-
ITunes won't run because a required component is not installed
I think a Quicktime upgrade went wrong and now I can no longer open my iTunes and this message appears: "The itunes application could not be opened. a required iTunes component is not installed. Please repair or reenstall Quicktime (-42404)" I have t