Error while settling costs to AUC (T.CODE CJ88)

The following error is encountered while settling costs to AUC using
t.code CJ88 with WBS element,
with parameters
with orders
Selection processing type 3 (partial settlement),
period 4,
FY 2008,
selection - with hierarchy, with orders.
Error message is:-
Typ Message text
LTxt
Sender: WBS ASCP.DSCA.CP.NS.DS.003 PLANNO MILLING 4MX2M
Acquisition value negative in area 01.

Hi,
Use T.Code: as02 and click on Depreciation areas, then double click on Depreciation area(example :01 - book dep), there u can select the field allow negative postings allowed. Once this process is completed, remove that indicator.
If u couldn't found that field, then goto screen layout for depreciation area and change status from suprress to optional.
Hope it can resolve ur problem
regards
Prasad

Similar Messages

Reverse settled cost of AuC

Hi All,
We have settled cost to AuC in Mar' 08 and now we can reverse it in Mar'09, Is it possible? When I try to reverse it the following message is displayed, " Reversal not possible; last settlement was in period 012 2009. Message No. KD547.
pls. guide how to go about with this situation.
Regards,
Aman

Hi Aman,
Please refer SAP Note 31163 for your needful
Regards,
Santosh

Error while Settlement to AUC from Project CJ88

Hi,
ECC 6.00/PSM-BCS
While settling the Project to AUC I am getting the below error. Please advice.
*Asset DAML 000009000004 0000: no subnumber with FM assignment CAPEX / /*
Message no. AW851
Diagnosis
During settlement of sender WBS DAMEPL 1.1.1.1 there was an attempt to settle a posting that has account assignment CAPEX / / (fund/functional area/grant) to an asset subnumber. However, the receiving asset DAML 000009000004 0000 does not have an asset subnumber with this assignment.
System Response
The posting on this sender cannot be settled to an asset subnumber.
Procedure
Either create an asset subnumber with account assignment CAPEX / / for asset DAML 000009000004 0000, or settle to a different receiver.
If this message appears as a warning only, then the posting from this sender is settled to the asset main number.
Fund Capex : CAPEX
Company Code : DAML
WBS Element : DAMEPL 1.1.1.1
Best Regards
Shekhar
Edited by: Chandrashekher Yellapragada on Jun 5, 2010 7:00 PM

I am facing the same error and find this OSS Note 440396 - Missing entries for configurable messages in IS-PS-FM where you can deactivate the error message.
Hope this will solve your issue too.
Regards,
OSS Note 440396
Symptom
System issues messages AW851,AW852,AW856 or AW857 as Error even though
functionality exists to make these configurable.
Other terms
LAIMBFM1, OBA5, AW, AW851, AW852, AW856, AW857
Reason and Prerequisites
Missing entries in tables.
Solution
Create Application Area for Customizable messages for 'AW' using transcation SM30 with view V_T100SA.
Next using transaction SM34, enter view cluster VC_T100S, click maintain and select Application Area AW and double click Messages. Add the following entries:
AppArea     No. Allowed Values     Std     Switch off
AW     851    EWI     E          X
AW     852    EWI     E          X
AW     856    EWI     E          X
AW     857    EWI     E          X
Afterwards with Transaction OBA5 insert the entries for the messages you want to customize, and set them to the error level the behaviour should be for your particular case.

GLT2201 error while settling AuC to Final Asset through KO88

Hello,
We have a scenario where in I am settliing an AuC through KO88 to the final Asset but am getting Document splitting error GLT2201. Profit Center is maintained in the Cost Center assigned to the Asset Master and also in the Internal Order. I could settle from the P/L account to the AuC asset when i ran KO88 earlier but its not allowing settling from AuC to the Final Asset.
We are using Parallel Ledger and I have defined 2 additional depreciation areas, 30 for posting only depreciation (real area) and 60 for posting only APC (derieved area). I have maintained ACSET for all the depreciation areas. I feel the error is due to Parallel Ledger but I am unable to figure out how and where.
Can anybody help me out please.
Thanks,
Rajat Gupta

Hello,
I managed to resolve the error, some how by oversight Profit Center was suppressed in the Field Status of Asset G/Ls though Cost Center was Optional. I changed the Profit Center Field Status to Optional and it worked.
But I am wondering how it allowed KO88 to run while settling from the Cost Element (P/L GL) to the AuC because they both used the same Field Status?
Thanks,
Rajat Gupta

WBS element is updated while settling cost from WBS to AUC

Hi Experts
At the time of settlement , when we settling the cost from WBS to AUC , WBS element is updated in AUC line item of accounting document , but it should not be updated actually.
As result AUC cost is loaded on WBS and budget of WBS is get affected , furthermore system is not allowing for MIGO even budget is available but in CJ30 it is showing assigned value is more then original budget.
Please suggest.
Thanks & Regards
shailesh

Hi Saurabh ,
I totally agree with you , but in our case system is not allowing(Error Message: Budget Exceeded) MIGO against capex PO - > WBS.
Note : in our case , system is checking budget at the time of MIGO also.
in our case , report S_ALR_87013558 is showing wrong actual value and also in CJ30 , total assigned value is larger then total distributable budget , As result our available budget gets negative figure in report S_ALR_87013558 , even i have already run CJEN->CJBN 2 or 3 times.
Note: Our Commitment value is correct.
Actually , according to report S_ALR_87013542 , system is showing correct actual value , that means we have sufficient available budget for further MIGO's
Now may be , due to WBS element is updated in AUC line item of accouning document of settlement (WBS to AUC) , system loads AUC values to WBS unnecessarily , our available budget gets negative figure.
For your reference , i am attaching screen shot of accounting document which is generated at the time of settlement from WBS to AUC.

Budget Exceed error while settlement in PS T-Code CJ88

Hi Guru's,
I have created structure upto 6 level and i have done planning and budgeting at 6th level only, and actual cost is also posted at 6th level.
When i am setteling that amount at 5th level WBS using T-Code CJ88 then it is giving Budget exceed error of that particular amount as budget is also available at higher level WBS as accumalation of budget at 6th level is going to higher level WBS as i am following buttom-up approach.
Please suggest.
Regards,
Ambuj

Hi Rajesh,
When you distribute budget to lower level WBS, the budget is only available at the lower level (availability is checked as: Budget - Distributed Budget - Assigned) regardless of whether it is shown at the superior level or not.
AVAC status is activated automatically on WBS where budget is distirbuted and released (provide you have maintained Activation Type 1 in Budget Profile OPS9). Please check if AVAC status is active on your 5th level WBS. If it is active then the system will throw the error as SAP standard behavior. You can remove this status from 5th level WBS via CJBW.
You may need to look at your budget configuration accordingly.
Regards,
Ammar

Error while settlement of WBS - Funds Management

Hi,
We have maintain derivation rule as - WBS to Fund Center. This Fund center is DUMMY because we need not want to control WBS through Funds Management.
There is always one Cost center in each WBS. while settling this WBS we are getting error as -
Asset ABC 000127000000 0000: no subnumber with FM assignment DUMMY / /
Message no. AW851
ABC - Company code
000127000000 - asset number
DUMMY - Fund center
suggest.

alex ice wrote:
Hi, 1 change FC in AS02 to dummy if it applicable.
> 2 Check note 618269 it applicable.
> 3 remove FC from asset master data
Hi Alex, how are u!?
I've got the same issue than Harsh Vaidya in my system ...
Ive already read this notes: [618269|https://service.sap.com/sap/support/notes/618269] (no apply to me, because Joint Venture Accounting isn't active), [844262|https://service.sap.com/sap/support/notes/844262], [1473357|https://service.sap.com/sap/support/notes/1473357], [446029|https://service.sap.com/sap/support/notes/446029] and [440396|https://service.sap.com/sap/support/notes/440396]
All very interesting notes :P
But... I couldn't find the solution
I try to TRACE from FMDERIVE too, but when I go to KO88, FMDERIVE's trace doesn't track anything.
Any help to throw some more light on this thread, would be very useful.
Thanks a lot!
Regards from Argentine.

Error while uploading cost element planning data into KP06 transaction

Hi,
I am facing the below error while uploading the Cost Element Planning excel file in KP06 transaction code. Please help me in fix this issue.
We are trying to enter a budget upload using Transaction code: KP06. We get the following message errors when we do this. It seems revenue accounts cannot be entered using cost centers. Question, how should these accounts be added? Kindly help me how to add Revenue cost elements to this planning?
Error accured when generating data for the planning processor
Messange no.K9400
Revenue element 451000 can not be planned on cost center 9720
Thanks
Kishore

The cost element which have category 01 only can be planned in the Kp06.
Regards
Ranjan

Error while settling Internal Order to CWIP asset using T-cdoe KO88

Hi experts,
While settling the amount from Internal Order to particular CWIP asset, i am getting the following error
"Define a number range for settlement documents"
Kindly provide me the solutions how to go about it.
Thanks in advance
Bashyam

Hi,
Go to T.Code KANK
Click on "Maintain Groups" (F6)
Assign a suitable number range to object KOAO
Regards,
Kenneth

Getting error while creating report group using T code GR52

HI All,
Below error is coming while generating report group in T code GR52
"Set 01010002SSS6EL0001 does not contain any entries "
Thanks in Advance......

Hi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil

Error while settlement of Internal order

Dear All
I am getting the following error while executing KO88 "Choose transaction type and base value appropriate for asset values".
The settlement and posting period are 12 and the processing type is "Partial Capitalization".
Pls advice
Rgds
Nitika

hi.....
check you settlemnt rule for internal order. forsure you will find mismatch between settlemnt rule and actual settlemnt. check in settlement rule the % to be settled.
Regards
Manish Jain
Pls assign points if your problem get solved.

Error while obtaining JCO connection in t-code RSPLAN

Hi Gurus,
I have installed ECC 6.0 SR3 and i have added BI_CONT and updated all the patches. But while trying to access the t-code RSPLAN and after clicking on the START MODELER button it is opening in a browser . after giving the user id and password in the browser , while opening the page it is showing the error " Error while obtaining JCO connection". and how to create jco connections in visual admin.
can anybody please help me in this issue.
Thanks in advance.
Regards,
Babu.

Hi,
when i was trying to open RSPLAN T-Code in BI, i able to open start modeller it says that http://udnubd1:8003/sap/public/myssocntl?sap-client=320 and says that cannot find server. So i request you please can anyone help me onthis issue.
Thanks,
Reddy

Geeting error while doing Mass UD using t code QA41

Hi
While doing mass UD using t code QA41 I am getting below error messages:
1. You can not make the UD because of 0001 non-valuated physical samples,
2. You can not make the UD because of 0002 non-valuated physical samples,
My objection is to do mass UD for all INPROCESS inspection lots where results are recorded but no UD given.
Request a solution where I am doing wrong and a solution to it.
Thanks in advance.
Pradipta Sahoo

Hi Craig
Thanks a lot for all your answers.
Last query: I will not able to do MASS UD if all samples are not valuated means I have to record results in all 3 physical samples.
1. In QA11 I am able to UD for each inspection lot (where result is recorded in 2 physical sample & 3rd one is not valuated). Why it is so? Why I am not getting the same error that 3rd sample is not valuated.
2. In QA41 mass UD is not possible if 3rd sample is not valuated. Why I am not getting all inspection lots and getting few in the output screen? Is there any other way where I can valuate all open inspection lots in mass operation?
3. In QA16, also I am not getting all inspection lots in the output screen. Why?
Requesting yo clarify my queries to make me undrstand the process better. So that I can convince my higher management to reduce physical sample generation in auto.
Thanks in advance for your help.
Pradipta Sahoo
+91 9909994216

Error while entering address details in company code master data.

Hi Experts,
I am getting error while i am entering address details in company code master data that is while i am creating new company code.
ERROR: message No. AM216
Incomplete Address : Enter Country.
Here eventhough i am entering country as "IN" then still i am getting error.
Thanx,

Yes that is right what is mentioned above, first you give the company code and name then give the currency then select address (Shift+F5) and in that if you select country as IN then it will automatically come to master data.
Edited by: venkata986 on Aug 31, 2010 12:31 PM

Error while settling internal order KO88 / KO8G)

Hi Friends,
We are in ECC5.0
I have an expense G/L account. Cost center and Business Area are mandatory to post in to this G/L account.
I posted some transactions to this G/L account with Business Area, Cost center and Internal order values in the document. When I try to settle this internal order to AUC, I am getting error 'Cost center is mandatory for G/L account xxxxxx'.
I am not sure, why it is not picking the cost center and Business Area from the original document. Please could any one advice me?
Thanks in advance

Hi Waman and Ajay,
Thanks for your information.
Sorry to ask a basic question:
while we run the settlement, will G/L entry have a cost center in the document?
If I have a debit line in expense G/L with cost center cc1 and order or1, when I settle this order, it will post a credit entry. But I am not sure if this credit entry will have cost center in that line?
If yes, how will be the entry for multiple debit lines with multiple costcenters? Because, when we settle the G/L, it will post only one line item as credit for the total amount.
Please could you help me in understanding?
Thanks,

Error while settling costs to AUC (T.CODE CJ88)

Similar Messages

Maybe you are looking for