Error while signing in. No prompt for Master Password.

Firefox 3.6.15 (Mozilla/5.0 (Windows; U; Windows NT 5.1; sv-SE; rv:1.9.2.15) Gecko/20110303 )
Firefox sync 1.7
Sync NEVER works automatically. In a new FF session it always reports "Error While Signing In". If I try to connect manually I must go through the set-up dialogue and enter my Master Password etc and then it works (during that session).
I have a Master Password defined.
Sync doesn't prompt for that before trying to connect. So the connection fails and sync concludes that a set-up must be performed.
Useless extension in current state.

Hi,
as per the error message is:
"... The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.) ..."
I guess the cert. setup either on your side or the other system's side is not fully correct. Check whether all cert., priv keys and public keys are exchanged propperly and setup as trusted certs.
Regards,
Kai
Edited by: Kai Lerch-Baier on Jul 9, 2009 1:24 PM

Similar Messages

How to reduce prompting for "Master password"

I hope there may be a setting to address this issue...
I have a number of passwords saved for various non critical web sites such as this forum. Recently I set a "master password" to protect my saved passwords. Whenever I open a page which has text boxes for credentials which I have saved I am prompted for the master password regardless of whether I wish to authenticate to the site or not. I would like to configure Firefox to only open the saved passwords repository (for want of a batter word) when I choose to authenticate to a site.
Is this possible?
TIA,
Ken
p.s. I close Firefox (to flush cookies etc.) OFTEN so simply unlocking the saved passwords once a day and leaving Firefox running is not an answer.

Open the PrefBar Customize window via the right-click context menu of the PrefBar. 
Create a new pref check via the right-click context menu of the right pane: New > Pref Check
Enter an ID (e.g. chk_rememberSignons) and a label that appears on the PrefBar and put in the Prefstring field signon.rememberSignons to specify which pref is affected. 
Put value in the toPref and fromPref fields, that will toggle the pref between true and false and show a check-mark with the true value. 
You can assign a hotkey to that pref if you want to toggle the pref with the keyboard. 
That still works if you want to hide the PrefBar with F8 to get more screen space.
I color the check boxes with code in userChrome.css to make it easier to spot that I've changed some of them
The customization files userChrome.css (interface) and userContent.css (websites) are located in the chrome folder in the user profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#prefbar-buttons checkbox[id="prefbar:button:chk_rememberSignons"] .checkbox-check[checked="true"]
{ -moz-box-shadow: 0pt 0pt 5px rgba(153,255,51,0.8) inset, 0pt 0pt 20px rgba(153,255,51,0.8) inset !important; }</nowiki></pre>

Why is the PopUp Window Prompt for Master Password Not Showing?

I have set a Masterpassword and it will usually show up when either start Firefox or try to enter a password on my gmail account. I have also used the F5 command to force this to pop-up. This is no longer working at my home computer or at work.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

[Solved] There is a yellow triangle at the bottom of the screen with the message "error while signing in"

Firefox Sync has been working fine between my home computer, work computer and my Android phone but suddenly my home computer has recently stopped syncing. There is a yellow triangle at the bottom of the screen with the message "error while signing in". I have checked passwords and codes on all three devices and check the sync versions are the same. All where correct. I have reinstalled both firefox and sync. I have even tried setting up a new sync account with a different user name but still the same problem. My work computer and phone sync fine but my home computer gets the error. Does anyone have any idea what could be causing this. Any help would be greatly appreciated as this is driving me mad!

I have now discovered that if I manually disconnect (Tools / Sync / Disconnect) and then sync it works but only once. I seem to be able to repeat this manual process indefinitely. I thought that this might give a better mind than mine a clue.

Error while creating inter-company invoice for stock transport

Hi ,
I am facing following errors while creating inter-company invoice for STO order.
We have scenario where standard PO is created in company code A & then replenishment delivery is created in company code B.While raising inter-company invoice to company code A, we are facing problem.
In replenishment delivery we have 10 line items. But when we try to do inter company invoice through VF01/VF04 we get following log
XXXXXXXXXX(delivery Number) 000000 Customer XXXXX: Customer master table KNVV is missing (VF-022)
XXXXXXXXXX (delivery Number)000010 The bill-to party could not be determined (VF-047)
XXXXXXXXXX (delivery Number)000010 The payer could not be determined (VF-048)
With this first line item from delivery is not flows to invoice & if we saves this invoice then it is get saved with account determination error as some of the data does not comes into invoice header like account assignment group for customer, Payment term, destination country,region, tax classification for customer etc. That means invoice gets created without first line item from delivery with account determination error & so,no accounting document gets generated.
I checked customer master for all SP,SH,BP,PY they are correctly maintained.This was working fine few months back, but not working now.
If anybody had come across such kind of scenario, your valuable inputs will be highly appreciated.
Thanks & kind regards,
Ganesh Palatshaha

Hello
Kindly check the sales area of customer involved, whether the customer maintain with sales area for STO.
If that is note the case the refer following link:
- Error VF 047 & 048 while creating Inter company billing
Regards
JP

Error while trying to retrieve text for error ORA-12705

I am getting the message "Error while trying to retrieve text for error ORA-12705" when trying to connect to a remote oracle database on the network.
I can access this database using:
sqlplus username/password@database
from a dos prompt.
For some reason I can't connect when using PHP (through my local Apache2 server on Windows XP).
'phpinfo' says oracle in enabled (installed as per: http://www.oracle.com/technology/pub/notes/technote_php_instant.html), so I'm pretty sure the problem isn't with php itself.
My guess is it's something with Apache, and maybe environment variables or user permissions or instantclient (10).
All the folders, from instantclient to the Apache server have full permissions set for "Everyone" which I would assume includes this mysterious "nobody" user I've read about.
As for instantclient, I have placed that "tnsnames.ora" file from the oracle server there, and that hasn't changed much.
I've tried setting, unsetting, editing (environment variables):
LD_LIBRARY_PATH
ORACLE_HOME
ORACLE_SID
TNS_ADMIN
NLS_LANG
ORA_NLS33
in both the system environment, and even with PHP's "putenv" function. (Note: and restarting each time I changed a system var.)
In PHP i'm using:
$c = oci_connect("username","pasword", "database")
I've tried OCILogon instead of oci_connect
For "database" I've tried:
- using the path to the oracle db: //Oracle1/e/oracle/ora81
- mapping the path to x: drive and using: x:/oracle/ora81
- using the name of the database by itself
- using the name of the database underscored with the database name
- using "(ADDRESS=(PROTOCOL=TCP)(HOST = host)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=database)))"
I have tried everything I can find from:
the Oracle installation page: http://www.oracle.com/technology/pub/notes/technote_php_instant.html
the Oracle troubleshooting page: http://www.oracle.com/technology/tech/php/htdocs/php_troubleshooting_faq.html#connect
and these forumswith no results, just the same error.
I have also spent about 16 hours Googling for help, and nothing.
Can someone please tell me, what exactly does a user using:
Windows XP
Apache 2
PHP
intantclient10
Oracle 8i (on a remote server)
need to do to connect to Oracle before jumping off a bridge?

Turns out Oracle was previously installed on this company laptop :(
I deleted any 'Oracle' mention in the registry with 'regedit' (from the command line) using the Find option. Not sure if it's always a good idea to do that, but I backed up the important stuff first anyway.
I uninstalled and reinstalled everything using the same guide mentioned above, and then it worked.
Now I can be friends with Oracle again.
Would be nice if the "Deinstall" removed the registry entries that caused this issue...

Error while signing data-Private key or certificate of signer not available

Hello All,
I am new to PI. I am currently stuck with an issue. The scenario is as explained below.
We need to check for the service availability before processing the data. So, we test for the RFC connection first from the ECC system. During this process, we access the digital certificate stored in the PI system so that it can be validated and allowed to consume this intended service.
Error :
When we trigger the RFC test from the ECC system, we get an error stating ' Error while signing data - Private key or certificate of signer not available '. But when we test the same functionality within PI system(Locally), we does not encounter any such error. The certificate is maintained and it appears fine.
The communication channels are stored with logon credentials.
Can anyone please help me with this error or provide your valuable inputs. Thanks in advance.
Regards,
Shivkumar

Hello,
When we trigger the RFC test from the ECC system, we get an error stating ' Error while signing data - Private key or certificate of signer not available '.
This should be normal behavior since the certificates are not installed in ECC SSL folders of Strust. Why not just install the certificates in the ECC system, perform an ICM restart and do a retest? After all, the certificates would both be the same in PI and ECC.
Hope this helps,
Mark

'error while signing document'

i got this error ('error while signing document') on my 1st attempt to use the service. simple 4 page PDF, no doc. security, same error both b4 & after i edited my user profile (i filled in the missing details & changed the default signature image).
cheers,

Hi,
I am also getting this error while attempting to sign a document. I have checked the first and name fields in my default signature profile for any non-English characters but I am still getting this error. I have also tested with a different signature profile with same results. Please advise if there are
other fields I need to check.
Thanks.

The test encountered an error while signing in to Outlook Web App. HTTP code: 200

Infrastructure: Exchange 2010 SP3 RU2 environment on 17 servers worldwide with CAS, MB, HUB and UM roles. Server 2008 R2 VM's on Hyper-V 2008 R2.
Trying to run the following command to test OWA connectivity on a server in the same Active Directory domain but in a different AD site:
Get-ClientAccessServer -Identity Server1 | test-owaconnectivity -AllowUnsecureAccess -TrustAnySSLCertificate
I get the reponse:
WARNING: [11:04:51.276] : An Outlook Web App page wasn't received.
WARNING: [11:04:51.276] : The test encountered an error while signing in to Outlook Web App.
HTTP code: 200
WARNING: [11:04:51.276] : Test failed for URL 'https://server1.domain.com/owa/'.
ClientAccessServer        MailboxServer            URL
Scenario       Result       Latency          Error
Server1.domain.com      Server2.domain.com  https://server1.domain.com/owa  Logon           Failure
The test encountered an error while signing in to Outlook Web App. HTTP code: 200
This is the same error message received from SCOM on its tests also.
I have created a test account on all 17 servers using ./new-TestCasConnectivityUser and ensured their mailboxes reside on the correct server in the correct database.
All internal servers are set for OWA and ECP for Windows Authentication. Only public facing CAS servers are set to Forms based. That said, have checked the 'Microsoft Exchange Forms-Based Authentication service' is running on both Server1 and Server2 as
are all Exchange services except 'Microsoft Exchange IMAP4' (not used) or 'Microsoft Exchange POP3' (not used).
However, if I run this command:
test-owaconnectivity -AllowUnsecureAccess -TrustAnySSLCertificate -URL
https://server1.domain.com/owa
I get the following success after I have entered my correct credentials:
Windows PowerShell Credential Request : cmdlet Test-OwaConnectivity at command pipeline position 1
Warning: This credential is being requested by a script or application on the Server2.domain.com remote computer.
Enter your credentials only if you trust the remote computer and the application or script requesting it.
Supply values for the following parameters:
MailboxCredential
ClientAccessServer MailboxServer URL
Scenario              Result      Latency    Error
(ms)
                                                        https://server1.domain.com/owa
Logon                 Success    6282.13
So if I login with my domain username, it works and logs in. If the script runs using the 'extest....' user account created by the above ./new-TestCasConnectivityUser.ps1 , it does not work.
Has anyone got any ideas please? I know its not the network as it works under my username, I know all fo the services required are running as it works under my username. There are no entries at all in the receiving server's error logs for Application, System,
Exchange or Powershell at all.
Any help greatly appreciated.
Danny

Did you read this? http://support.microsoft.com/kb/2277649/en-us
Did you run Test-MapiConnectivity? If not, can you run and post results?
HossFly, Exchange Administrator

Error while signing jacob.jar in FMW 11g

Hi,
after setting the PATH like:
set PATH=C:\Programme\ORACLE11g\Oracle\Middleware\PFRD11g\jdk\bin;%PATH%
while signing the jacob.jar file for the first time after installing 11g Forms in Windows the following error occurs:
C:\Dokumente und Einstellungen\bten>C:\Programme\ORACLE11g\Oracle\Middleware\ins
tances\FRinst\bin\sign_webutil.bat C:\Programme\ORACLE11g\Oracle\Middleware\PFRD
11g\forms\java\jacob.jar
Generating a self signing certificate for key=webutil2...
Keytool-Fehler: java.lang.RuntimeException: Verwendungsfehler: 360 ist kein g³lt
iger Befehl.
There were warnings or errors while generating a self signing certificate. Pleas
e review them.
Backing up C:\Programme\ORACLE11g\Oracle\Middleware\PFRD11g\forms\java\jacob.jar
as C:\Programme\ORACLE11g\Oracle\Middleware\PFRD11g\forms\java\jacob.jar.old...
1 Datei(en) kopiert.
Signing C:\Programme\ORACLE11g\Oracle\Middleware\PFRD11g\forms\java\jacob.jar us
ing key=webutil2...
jarsigner error: java.lang.RuntimeException: keystore load: C:\Dokumente und Ein
stellungen\bten\.keystore (Das System kann die angegebene Datei nicht finden)
There were warnings or errors while signing the jar. Please review them.
C:\Dokumente und Einstellungen\bten>
What is the reason, and how can I solve this?
Thanks Bea

Perhaps you are using old WLST code (used for OSB 10g), with OSB 11g.
The ALSBConfigurationMBean (com.bea.wli.sb.management.configuration.ALSBConfigurationMBean) Interface in the com.bea.wli.sb.management.configuration package in the Oracle Fusion Middleware Java API Reference for Oracle Service Bus includes example code illustrating how to import and export Oracle Service Bus 11g configurations, how to change environment values, how to query resources, and so on. Please find it here -
http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e15033/toc.htm
Regards,
Anuj

Webutill config error-There were warnings or errors while signing Jar

On configuring utill i am getting following error, but unable to trace that what is can be the cause!....
Generating a self signing certificate for key=webutil2...
keytool error: java.lang.Exception: Key pair not generated, alias <webutil2> alr
eady exists
There were warnings or errors while generating a self signing certificate. Pleas
e review them.
Backing up c:\DevSuiteHome_1\forms\java\frmwebutil.jar as c:\DevSuiteHome_1\form
s\java\frmwebutil.jar.old...
1 file(s) copied.
Signing c:\DevSuiteHome_1\forms\java\frmwebutil.jar using key=webutil2...
'jarsigner' is not recognized as an internal or external command,
operable program or batch file.
There were warnings or errors while signing the jar. Please review them.

'jarsigner' is not recognized as an internal or external command,This means that Windows could not find the jarsinger.exe. You will need to modify your PATH environment variable and add the C:\DevSuiteHome_1\jdk\bin\ directory to the PATH. This is where the Oracle supplied jarsinger.exe is located.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Error while posting a write up for asset belonging to affiliated company

Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
Pragya

Hi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya

Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /

Guyz,
Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
*Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
Any suggestions please ?
Thanks

Warehouse managment has its own movement types, most identical to inventory management movement types.
These WM movement types are determined via reference movement types.
the error you have just looks like your customizing is not complete.
IMG > LE > WM > Interfaces > IM > define movement types.

'Error while signing data-Private key or certificate of signer not availabl

Hello All,
In my message mapping I need to call a web service to which I need to send a field value consist of SIGNED DATA.
I am using SAP SSF API to read the certificate stored in NWA and Signing the Data as explained in
http://help.sap.com/saphelp_nw04/helpdata/en/a4/d0201854fb6a4cb9545892b49d4851/frameset.htm,
when I have tested using Test tab of message mapping it is working fine and I am able to access the certificate Keystore of NWA(we have created a keystore view and keystore entry to store the certificate) and generate the signed data ,but when I test end to end scenario from ECC system,it is getting failed in mapping with the error
' Error while signing data - Private key or certificate of signer not availableu2019.
Appreciate your expert help to resolve this issue urgently please.
Regards,
Shivkumar

Hi Shivkuar,
Could you please let me know how you were trying to achieve the XML signature.
We have a requirement where we have to sign the XML document and need to generate the target document as following structure.
<Signature>
 <SignedInfo>
 <CanonicalizationMethod />
 <SignatureMethod />
 <Reference>
 <Transforms>
 <DigestMethod>
 <DigestValue>
 </Reference>
 <Reference /> etc.
</SignedInfo>
<SignatureValue />
<KeyInfo />
<Object>ACTUAL PAYLOAD</Object>
</Signature>
I am analyzing the possibility of using the approach that is given in the help sap link that you have posted above. Any inputs will be apprecited.
Thanks and Regards,
Sami.

Error while trying to retrieve text for error ORA-12154

Hello,
I try to install php 5.1.2 on a WIN2003 server and IIS6 with the OCi8 extension without success from several days.
On my server I've a 920 oracle client and the 10.1 instant client, I copy the tnsnames.ora in the instant client's directory.
I've declare many environnement variables :
- NLS_LANG : AMERICAN_AMERICA.WE8MSWIN1252
- TNS_ADMIN : E:\...\oracle\instantclient_10_1
- ORA_NLS33 : E:\..\oracle\920\ocommon\nls\ADMIN\DATA
With the php command line the oci_connect function correctly works : the php command line use the instant client's tnsnames.ora. I can query with success my database.
When I try to load a web php script (the same as the php command line script) I have the following error " Error while trying to retrieve text for error ORA-12154" ( oci_connect( $user , $pass, $sid ) . The $sid variable have the value of an alias declared in the tnsnames.ora.
If I replace the sid's alias by something like this " (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xx.xx.xx.xx)(PORT=1521)))(CONNECT_DATA=(SID=xx)" in the oci_connect function, I have another error : Error while trying to retrieve text for error ORA-12705.
A web page with the phpinfo function displays the following messages about oci8 extension : It seems to be correct.
oci8
OCI8 Support enabled
Revision $Revision: 1.269.2.8 $
Active Persistent Connections 0
Active Connections 0
Temporary Lob support enabled
Collections support enabled
Do you have any idea ? Thanks a lot

The web server is not seeing the Oracle environment correctly. You need to set PATH to the instant client libraries. ORA_NLS33 is not used for Oracle 10g clients. Perhaps you have some library conflict with two versions of Oracle on the machine?
These may help:
http://www.oracle.com/technology/tech/php/htdocs/php_troubleshooting_faq.html#envvars
http://blogs.oracle.com/opal/2006/05/01

Error while signing in. No prompt for Master Password.

Similar Messages

Maybe you are looking for