Error while slecting member from dimension
Hi All,
When I open the dimension list in BPC for Excel, I am getting the following error:
"A member could not be found in this search criteria."
Hello,
Did you receive the error when you try to search a specific member or just opening the dimension list?
You can try to run eTools->Client options, clck on Clear local application information. This will refresh the information for that dimension on your local machine. If this will not solve your problem, please try to reprocess that dimension with full process option for all applicatio.
Hope this can help you to solve the problem,
Mihaela
Similar Messages
-
BPC 7.5 : Error in deleting member from dimension
Hi All
In BPC 7.5, I have created earlier one member "F_P/L"in Flow Dimension and tested some data. Now I want to delete the member "F_P/L" from the Flow Dimension and while processing it, I am getting following error :
" Dimension member F_P/L is an invalid member ID, Error in admin module"
I had deleted the tested data from BI by running the clear data package as data was existing in BI. Consequently, now for this member "F_P/L" it is showing "0.00".
Please give advise how to fix it.
Thanks & Regards
AryanHi Nilanjan,
I can leave that member as unused but problem is that I am unable to create any new member in that dimension. While processing the dimension with new member I am getting same error. As Such, I am not able to use such dimension. Yes, that dimension is used in application.
I need to add new member in the that dimension but due to above error I am not able to create any new dimension. Hence, I tried to delete such member F_P/L.
Please suggest
Thanks & Regards
Aryan -
EVDRE error on certain member from Dimension
Hi,
One of the template will have EVDRE error when selection this entity. Upon check, by creating simple EVDRE report, some new members from this entity cause the EVDRE error. The new members was just added to the dimension and no issue when running process dimension. We have open the dimension, save and re run the process dimension without any error but still have the evdre error when open the template with the entity. No issue with other entity For info we are running BPC MS 7.5 upgraded recently from BPC MS 7.0. Any help is very much appreciated.Hi Kheirudin,
sorry from your description I didn't understand it was the same issue. If it is the same normally you're able to process the dim the day after.
You don't need to raise to SAP, SAP has released one years ago, see please 1633966 - BPC MS: EVDRE encountered an error retrieving data from the Web Server, "Errors found retrieving data" .
For my experience it's sufficient as workaround to update the date of the .dep files, without stop and restart of services as described in the thread of your last answer.
Let me know if the workaround is clear or not.
Regards
Roberto -
Error while invoking member: ManagedInit1 - Login failed for user 'SRCAdmin
I am trying to setup a Test Server for BOP 11.60 with MS SQL 2000 in MS Windows Server 2003. After installation, I copied user directory and database from live system to the new Test server. After installed the application andI updated Configuration Manager but when I run Planning Application Services, I have the following message:
System.Exception: Error while invoking member: ManagedInit1 - Login failed for user 'SRCAdmin'. ---> System.Runtime.InteropServices.COMException (0x80131904): Login failed for user 'SRCAdmin'.
--- End of inner exception stack trace ---
at SRC.Core.Common.LateBoundHelper.InvokeMethodDirect(String methodName, BindingFlags flags, Object[] args)
at SRC.Core.Common.LateBoundHelper.InvokeMethod(String methodName, Object[] args)
at SRC.Core.Host.HostProcess.StartUp()
I can use SRCAdmin user login to SQL Database without any problem but use Adminbop to start the Planning Application Services, I had this message.
Does anyone know what is the problem?
Regards,
IrenePlease, review your FBA configuration https://sharepoint2013fba.codeplex.com/
-
Error while creating subsite from site template
Hi,
I am getting below error while creating subsite from existing site template .
Sachin BhosaleThere must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
to the following blog post for more information
http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
Cheers, -
Error while updating data from PSA to ODS
Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo -
Error while selecting date from external table
Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2 SE_CUST_ID NUMBER(38),
3 SE_TRAN_AMT_LCY FLOAT(126),
4 SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6 TYPE ORACLE_LOADER
7 DEFAULT DIRECTORY ext_tables
8 ACCESS PARAMETERS (
9 RECORDS DELIMITED BY NEWLINE
10 FIELDS TERMINATED BY ','
11 MISSING FIELD VALUES ARE NULL
12 (
13 country_code CHAR(5),
14 country_name CHAR(50),
15 country_language CHAR(50)
16 )
17 )
18 LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell -- -
DB Connect Load - "Unknow error while uploading data from the DB Table"
Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
AbhijitHi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait -
Failed to commit objects to server. Error while publishing reports from BW
Hi,
I am getting below error while publishing reports from BW to BO.
"0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
Anyone having any solution for this. Thanks in advance.Hi Amit
It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
Thank you:-) -
Error while creating DTP from DS to Infoobject
Dear All,
I am getting one error while creating DTP from Datasource to Info object can any one give some suggetion regarding this issue.
Issue:Enter a valid value
Msg No:00002
Procedure: Display the allowed values withF4 and correct your entry,
Regards,
SatyaHi Satya,
Trying logging off the system and log in again and try to activate Data source Infoobject and transformation again and try creating DTP by selecting Selecting the source system by pressing F4. I hope it should work.
I don't find any specific problem or any patch problem with the error you are getting.
Hope it helps !
Regards,
Rose. -
Password Violation error while creating users from Admin interface
Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
VijayGuys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay -
Error while sending data from XI to BI System
Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
NarendraHi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal -
I got new Apple TV 10 days back,its not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.
I can only see pics and video saved in my iphone. No other options are working.The worst part is that its not asking wifi passoword.
Not able to connect istores and itunes.
I cannot do software update. Can anyone help in this content?Thanks Brian- I am not connecting it with iphone teethering. I am using it with my DSL wifi.
I am using it with ethernet cable then its working fine.If i am trying to use it with WIFI then its giving error.
I tried using Netwrok testing but its giving same error. -
Error while updating data from DataStore object
Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PMHi Vijay,
I got this error:
Runtime Errors MESSAGE_TYPE_X
Date and Time 04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
been logged for this process.
System Response
No log has been written. The process (and consequently the chain)
has been terminated.
Procedure
If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea? -
Error while getting image from database in SUP using ios?
Hi All,
Im developing native iOS application using sup 2.1.3 . Im getting error While retrieving image from SUP database. Here i'm trying to get image from database and show in imageView.can any one help me how to fix this issue?
In database image datatype is 'LONG Binary' .
My table Schema:
CREATE TABLE dba.ImagesTable (
RowID INT NOT NULL,
ImageName VARCHAR(20) NOT NULL,
PhotoData LONG BINARY NOT NULL,
IN SYSTEM
ALTER TABLE dba.ImagesTable
ADD CONSTRAINT ASA137 PRIMARY KEY CLUSTERED (RowID)
ALTER TABLE dba.ImagesTable
ADD CONSTRAINT ASA138 UNIQUE NONCLUSTERED (RowID)
in Xcode:
[SUP107SUP107DB synchronize];
SUP107ImagesTable *imgTable =[[SUP107ImagesTable alloc]init];
SUP107ImagesTableList *list =[SUP107ImagesTable findAll];
SUP107ImagesTable * oneRecord =[list objectAtIndex:0];
NSLog(@"rowId:%d---imageName:%@---photoData:%@---photoLenght:%d",oneRecord.rowID,oneRecord.imageName,oneRecord.photoData,oneRecord.photoDataLength);
NSData *tempData =[[NSData alloc]init];
SUPBigBinary *responseBinaryData = (SUPBigBinary *)oneRecord.photoData.value;
@try {
[responseBinaryData openForWrite:[oneRecord.photoData length]];
[responseBinaryData write:tempData];
@catch (NSException *exception) {
NSLog(@"exception: %@",[exception description]);
UIImageView *imgView =[[UIImageView alloc] initWithFrame:CGRectMake(50,50,100,100)];
[self.window addSubview:imgView];
UIImage * tempImage =[UIImage imageWithData:tempData];
imgView.image = tempImage;
[responseBinaryData close];
Error Log:
2014-04-02 18:42:15.150 SUP102[2873:70b] rowId:1---imageName:Apple---photoData:SUPBigBinary: column=c pending=1 allow_pending_state=1 table=sup107_1_0_imagestable mbo=0x0 key=(null) ---photoLenght:90656
Printing description of responseBinaryData:
<OS_dispatch_data: data[0xc891b40] = { leaf, size = 90656, buf = 0x1213a000 }>
2014-04-02 18:42:33.304 SUP102[2873:70b] -[OS_dispatch_data openForWrite:]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.305 SUP102[2873:70b] exception: -[OS_dispatch_data openForWrite:]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.305 SUP102[2873:70b] -[OS_dispatch_data close]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.306 SUP102[2873:70b] [ERROR] [AppDelegate.m:497] NSInvalidArgumentException: -[OS_dispatch_data close]: unrecognized selector sent to instance 0xc891b40This thread talks about uploading image to SAP from a IOS device,Sending Image to SAP via iOS Native app (SUP 2.1.3)
Midhun VP
Maybe you are looking for
-
What has happened to the essence to what a phone w...
I have been meaning to discuss this for monthsand have never got around to it. The normal land line phone work 100 percent of the time you pick it up and it works you make calls from it and you put it down when your finished. The mobile phone has los
-
My Itunes will NOT update!!!! PLEASE HELP!!!!
after i click download now it goes to the next page and says thanks for downloading!!! when really it did nothing! am i doing somthing wrong!?!? HELP PLEASE!
-
PreProcess Event Handler setting default password
Greetings. We developed a custom preprocess event handler and is working fine, but I want to set a default password for a new user using the sentence orchestration.addParameter("Password","defaultpassword") However I got the message : <Error> <oracle
-
am getting very frustrated I have used my entire day trying to make my skpe work. I know that my computer is working fine. I can hear programs play music etc. I used to be able to use skype without a problem. I got a new skype friendly head set and
-
RMAN backup in HP Ultrium 3-SCSI(3mn) tape device
Dear All IS it possible to take online RMAN backup in HP Ultrium 3-SCSI(3mn) tape device? Note: this is not a tape library, a stand alone tape device. Thanks & Regards Quazi Abdur Rab