Error while specifying condition in Interface Determination

Hi all,
I am facing a typical problem
It's a proxy to file scenario with mutiple receivers.
In the interface determination when we are trying to specify the condition, it gives the following error.
"Message interface does not exist in any software components installed on this business system".
Detailed solution would be highy helpful.
regards.
younus

Hi Yonus,
It seems that u have made changes in SWCV after doing the configuration.
Try out thess:
STEP1->In ID
Go to menu :--> Enviorment->clear SLD cache
Step2->In IR
Go to menu :-->Tools->Transfer from SLD->Update application component and then step 1
Step3->IN SLD
Check the the SWCV u r using is associated with the Business system u are using. Check for the checkbox for SWCV in Business System.
Sachin
Message was edited by:
Sachin Dhingra

Similar Messages

Getting error while creating condition type in SPRO

Hi ,
can somebdy tell me why i am getting the following error while creating condition type in SPRO
No valid change license available for message /sapcnd/
and also while rule determination using condition type we are getting the following error.
system error:system cannot read the structure for table
reg
venkat

Hi Venkat,
Do you have the error number code!?
Regards,
Michel Bohn

Condition Based Interface Determination in ICO (AAE) - PI 7.1 EHP1

Hi Friends,
We have PI 7.1 EHP1 - SP 04.
In our scenario, we have 1 outbound interface and 2 inbound interface. Based on condition, it needs to select the first inbound interface or second inbound interface.
In the normal configuration, we are able to select. (By click + icon and add condition in the Receiver Interfaces in Interface Determination Step)
When we create configuration using ICO (Integrated Configuration), there is no option in "Receiver Interfaces" Tab to add two inbound interfaces with condition.
Could you please clarify how do we do this in ICO?
Kind regards,
Jegathees P.

IMHO, condition based interface determination is not possible in ICO.
Use Multiple inbound service interfaces... You can handle in design level .. ESR level.
Check the Abhishek's blog... This might be helpful.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90dcc6f4-0829-2d10-b0b2-c892473f1571?quicklink=index&overridelayout=true
Note: Since in your case you need two receiver agreements, you cannot handle through ICO. The above link might be helpful to do multimapping without BPM.
Edited by: Baskar Gopal on Apr 26, 2011 9:53 AM

Condition based Interface determination

Hi ,
Environment : PI 7.1.
Scenario : File to Proxy.
In this scenario , We have a single file interface which reads a file and routes the data to two different inbound interfaces.
Steps followed to do this -
>>Defined two inbound interfaces interface1 & interface2.
>>Both interfaces are pointed to same ECC system.
>>Read the file using a single sender file communication channel.
>>Define receiver ECC in the receiver determination.
>> Define interface determination based on a value of a field in the file structure(source structure). Used XPATH to define this content based routing and selected operation mapping specific to the interface.
1 sender agreement
1 receiver determination ( not using enhaced receiver determination because we have only one receiver)
1 interface determination which has two receiving interfaces based on XPATH condition ( maintain order runtime is checked)
2 Receiver agreements.
2 Communication channels.
For example if you have 10 lines in a file , out of which if 5 lines has a value related to interface 1 & 5 lines has a value related to interface 2. It should push the data into two different proxies as configured.
We are facing a problem in this scenario -
There is no consistency in the logic. Some times it runs interface 1 & some time it executes interface 2.
based on condition 1 it routes the data to interface 1 successfully but the structure is not getting created for interface 2 so it is giving an error stating the interface 2 structure is not available.
In SXMB_MONI the branching steps show two subnodes but if you see the log it shows that in subnode 1 the sender is sender interface & the receiver is interface 1 based on the filter condition. If you see the log for subnode 2 then it shows the sender is sender & the receiver as interface 2 below that it shows another entry which shows the reciver interface is interface2.
Please evaluate and let us know if the approach we are following works or not. If there is any limitations please let us know how to achive this.
Regards,
Reddy

Hi,
Your design is correct but here you missed one point. Here the message is send either to receiver1 or receiver2 depending on the condition but not both. As this does not result in multiple messages with the same payload because only one condition can ever be true at runtime. For more details see the below link
http://help.sap.com/saphelp_nw04/helpdata/en/46/8015de950e6be3e10000000a155369/frameset.htm
If you want to create multiple message then you need do 1:n mapping :
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417700)ID2056393550DB10021342992851308291End?blog=/pub/wlg/2927
Shweta.

Error when trying multiple inbound interface determination for IDOC

Hi !
I have this scenario: File -> XI -> IDOC.
For each source file, I need to send multiple idoc packages, all to the same business system, but each package should be the result of different interface mappings.
All mappings have same source and target message types...e.g. source: MT_MyFile, target: CREMAS04.
To avoid creating a generic mapping program, we need to duplicate the current mapping program, make it handle the new case, and then add it as second interface mapping in Interface Determination, with same inbound interface, but different interface mapping, without conditions. All interface mapping should execute.
We are receving this error:
<SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
<SAP:P1>Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xxxxx/xxxx:.MI_xx_xxxxxxxx_xxx_xx</SAP:P1>
<SAP:Stack>Error when determining the inbound interface: Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xxxxx/xxxx:.MI_xx_xxxxxxxx_xxx_xx Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xxxxx/xxxx:.MI_xx_xxxxxxxx_xxx_xx</SAP:Stack>
Any clues?
Regards,
Matias.

Hi Satish !
Thanks.
I need to send different IDOCs to SAME business system.
In Interface determination I need this:
Inbound Interface -
Condition -
Interface Mapping
IF_1 no condition M_1
IF_1 no condition M_2
I need to send BOTH IDOC packages to same business system.
But it keeps throwing the posted error.
Regards,
Matias.

Configuring conditions in Interface Determination

Hi,
We have a scenario where the Message has to be sent to 2 different business systems(say BS1, BS2). with in one business system(BS2) we need to send the message to 2 different locations based on the Value we received in the Message.
For the above Scenario we have developed a Receiver Determination with 2 receiver systems(2 different business systems BS1,BS2)
As part of the Interface Determination
for 1 business system(BS1) we have a single Interface Determination(ie 1 configured Inbound Interfaces) .
in the 2nd Business system(BS2) we have 2 configured Inbound Interfaces and have a conditions added to that.
While we execute the Interface with a Message (end to end flow) The message is going through BS1 where as in BS2 if any of the conditions failed(OR Condition), the message is not getting routed to any of the locations in BS2.
If we see in SXMB_MONI the message is getting branched and were able to see one message successfull and the other Message in(for the flow in which the condition is successful) "Message being Processed".
Thanks in advance.
Ganesh

Hi,
Check some links,
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm
http://www.w3schools.com/xpath/default.asp
http://www.w3schools.com/xpath/xpath_operators.asp
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
/people/suraj.sr/blog/2006/01/05/multiple-inbound-interfaces-within-a-service
Regards,
phani

AP error while submitting "Payable Open interface"

Hello,
I am trying to run the request 'Payables open interface'. I got the output once and the error was because the supplier site was invalid. I created a supplier site saved it and ran the request again. Now, I am getting the following error.
Payables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXIIMPT module: Payables Open Interface Import
Current system time is 21-JUN-2009 08:15:01
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_source='SQLLDR'
p_batch_name='N/A'
p_purge_flag='N'
p_trace_switch='N'
p_debug_switch='N'
p_summary_flag='N'
p_commit_batch_size='1000'
p_user_id='1007990'
p_login_id='2532036'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/u02/applmgr/lmtestora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to: /u02/applmgr/lmtestora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Spawned Process 1752
MSG-01104: (Before Report) Modified file
MSG-00000: p_purge_flag :N
MSG-00000: c_nls_yes :Yes
MSG-00000: c_nls_no :No
MSG-00000: p_summary_flag :N
MSG-00000: p_nls_summary :No
MSG-00000: p_nls_purge :No
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 6.0.8.27.0 - Production on Sun Jun 21 08:15:02 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 2776668.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
I am trying this for first time. Any help is highly appreciated.
Thanks.

Hi,
Please go through the following documents and see if it helps.
Note: 107628.1- Payables Open Interface Invoice Import Troubleshooting Guide (APXIIMPT)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=107628.1
Note: 220355.1- APXIIMPT-Payables Open Interface Import Fails Rep-1419:'Beforereport' : Pl/Sql Program Aborted
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=220355.1
Regards,
Hussein

Error while creating condition record

Hi
Am using 4.7 and creating condition record while saving condition record am getting error NO UPDATE SERVER FOUND FOR CONTEXT E, So am stuck up and do not know whom to contact is it error for BASIS? or related with SD kindly help.
Thanx

Hi Mukesh
As you are getting error NO UPDATE SERVER FOUND FOR CONTEXT E, while saving the condition record, kindly consult your BASIS consultants and ask them to check wheather the pricing related tables and structures have been copied and uploaded properly or not.
Regards
Srinath

Getting Type Mismatch Error while passing Array of Interfaces from C#(VSTO) to VBA through IDispatch interface

Hi,
I am facing issues like Type Mismatch while passing Array of interfaces from .NET to VBA and vice versa using VSTO technology.
My requirement is that ComInterfaceType needs to be InterfaceIsIDispatch.
My Interface definition is somewhat like this
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("AAF48FBC-52B6-4179-A8D2-944D7FBF264E")]
    public interface IInterface1
        [DispId(0)]
        IInterface2[] GetObj();
        [DispId(1)]
        void SetObj(ref IInterface2[] obj);
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("CDC06E1D-FE8C-477E-97F1-604B73EF868F")]
    public interface IInterface2
IF i am passing array of above interface (created in C#.Net) to VBA using GetObj API,i am getting type mismatch error in VBA while assigning the value to variable in VBA.Even assigning to variant type variable gives TypeMismatch.
Also while passing Array of interfaces from VBA using SetObj API,excel crashes and sometimes it says method doesn't exists.
Kindly provide some assistance regarding the same.
Thanks

Hi,
I am facing issues like Type Mismatch while passing Array of interfaces from .NET to VBA and vice versa using VSTO technology.
My requirement is that ComInterfaceType needs to be InterfaceIsIDispatch.
My Interface definition is somewhat like this
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("AAF48FBC-52B6-4179-A8D2-944D7FBF264E")]
    public interface IInterface1
        [DispId(0)]
        IInterface2[] GetObj();
        [DispId(1)]
        void SetObj(ref IInterface2[] obj);
    [ComVisible(true)]
    [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
    [Guid("CDC06E1D-FE8C-477E-97F1-604B73EF868F")]
    public interface IInterface2
IF i am passing array of above interface (created in C#.Net) to VBA using GetObj API,i am getting type mismatch error in VBA while assigning the value to variable in VBA.Even assigning to variant type variable gives TypeMismatch.
Also while passing Array of interfaces from VBA using SetObj API,excel crashes and sometimes it says method doesn't exists.
Kindly provide some assistance regarding the same.
Thanks

PI 7.1 Condition in interface-determination

Hi everybody,
I want to process interface determinations depending on payload. But when opening the condition editor in interface determination, the interface on which to apply the condition is not obtained!
What could be the reason?
Thanks
Regards Mario

Hey Mario .. that's a bug. Thanks for pointing this out. Never noticed till now
Regards,
Neetesh

XPATH to determine node name in condition of Interface determination

Hi,
does anybody out there know whether one can use a condition such as "name(/p1:Envelop/p1:Body/*)" to retrieve the name of the first element underneath the Body structure which is usually the payload. In the example below. I'd like to retrieve "ns0:BAPI_USER_GET_DETAIL" or just "BAPI_USER_GET_DETAIL" which I would like to than compare in my "=" condition.
<?xml version="1.0" encoding="iso-8859-1"?>
<sap:Envelope xmlns:sap="urn:sap-com:document:sap" version="1.0">
<sap:Header xmlns:rfcprop="urn:sap-com:document:sap:rfc:properties">
 <saptr:From xmlns:saptr="urn:sap-com:document:sap:transport">BC1</saptr:From>
 <saptr:To xmlns:saptr="urn:sap-com:document:sap:transport">BC2</saptr:To>
</sap:Header>
<sap:Body>
 <ns0:BAPI_USER_GET_DETAIL xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
 <CACHE_RESULTS/>
 <USERNAME>bauerd</USERNAME>
 </ns0:BAPI_USER_GET_DETAIL>
</sap:Body>
</sap:Envelope>
I have a client that once to migrate his SAP BC interfaces to PI without having to change the sending application which is a CICS mainframe application. The mainframe application invokes various BAPI's by just passing in a different payload into the above envelope. The payload is always the request structure for the BAPI. The message is send synchronously to SAP BC which than calls the BAPI and returns the response to the caller, again in form of the above envelope and as payload the BAPI response structure.
To convert this to PI I have to be able to initiate different interface mappings depending on what BAPI is requested. This is pretty straight forward as there are no special mapping transformation taking place in SAP BC for both the BAPI request and response. However I need to determine what interface mapping to call depending on BAPI requested by the CICS application.
As said the customer does not want to change the sending application. The only part we are allowed to change is the URL which changes from SAP BC to the SAP PI Plain HTTP sender adapter. The post will always use the same outbound message interface. Therefore I can't use SAP PI's standard receiver determination. Using this adapter I will also be able to get access to the whole message envelope as outlined above.
I already got all of this working nicely with the exception that I can't determine what BAPI is requested and therefore what interface mapping I have to trigger in my interface determination.
Has anybody used a condition as above and if so how should it look like in the condition editor. The one outlined above does not seem to work. However it is also not failing in PI.
Also I don't want to change my approach for doing this. However if it is not possible to retrieve the node name using the xpath statement (as outlined above) in the condtion editor than I will have to look for a different approach to resolve this problem. Any suggestions would than be more than welcome.
Many thanks in advance.
Dieter

If the structure is not too big, you can use:
//ns0:BAPI_USER_GET_DETAIL EX
otherwise take the full path:
/p1:Envelop/p1:Body/ns0:BAPI_USER_GET_DETAIL EX
The namespaces have to be declared.
Regards
Stefan

IDoc to file- How to include conditions in Interface determinations

Hi,
In interface Determination i am trying to add the conditions based on IDoc structure field value. But when i clicked on Condition editor i don't find Idoc stucture in editor XPath.
Please suggest me how i can add the condtions in the Interface determination in IDoc to file Senario.
Thanks in Advance...
Regards
Sreeni

Hi Sudhir,
I have tried as you mentioned, but still its not working. Below i am providing my inbound payload.
Could please let me know how i have to mention in condition editor to refer the IDoc field
ZGHIER01/IDOC/Z1GLHIERH/SETNAME
<?xml version="1.0" encoding="UTF-8" ?>
- <ZGHIER01>
- <IDOC BEGIN="1">
 + <EDI_DC40 SEGMENT="1">
 - <Z1GLHIERH SEGMENT="1">
 <CATEGORY>GLHIER</CATEGORY>
 <SETNAME>PEGPL_AG</SETNAME>
 + <Z1GLHIERD SEGMENT="1">
 + <Z1GLHIERI SEGMENT="1">
 + <Z1GLHIERI SEGMENT="1">
 + <Z1GLHIERI SEGMENT="1">
 + <Z1GLHIERI SEGMENT="1">
 </Z1GLHIERH>
</IDOC>
</ZGHIER01>
Thanks & Regards
Sreeni
Edited by: Sreenivasulu Reddy jonnavarapu on Dec 12, 2008 10:39 PM

Condition in Interface Determination giving problem - URGENT!

Hello experts,
In my scenario I have one idoc posted from the SAP R/3 and I need to write max of 3 files in the same receiver file system based on some condition i.e. based on the value of some field in the incoming idoc.
What I have done is in my interface determination, I have given that condition for all the 3 inbound interface. that is in the condition field in interface determination, for each inbound interface I chose that perticular field in idoc and gave the condition for which that interface should run.
Now when I am pusing an idoc, if that idoc contains only one condition than my interface is working fine by creating only that file. I have checked this for all 3 files by sending 3 different conditions in 3 idocs. It creates 3 different files for 3 idocs.
But if I send all 3 conditions in one idoc (since idocs can have multiple segments - in few segments i am giving one condition and in few others the 2nd conditon and in the rest the 3rd condition), I expect all 3 files to be created in my file system with data fulfilluing only that perticular condition. but this is not happening. In interface determination only one of the 3 is getting executed. Rest 2 is ignored and i cannot trace it anywhere (RWB, SXI_MONITOR etc)
I have tried all possible combinations but this is not working if i send in 1 single idoc?
Please help me in solveing this as this is a production issue and they cannot send 3 diffent idoc for 3 conditions. Where am i going wrong?
Waiting for your responses.
Thanks,
Yash

Hi Jakub,
My scenario is one idoc say IDOC 1 and 3 files says FILE1, FILE2 and FILE3. Now the target message type for these three files are MT_FILE1, MT_FILE2 and MT_FILE3 (3 different message types).
The only catch point here is i have 2 different interface for creating FILE3 (same message type but different mapping, interface etc). Each interface is based on a condition.
Now when I send one doc which includes condition for only FILE1 and FILE2, it creates 2 file.
If I have condition of only FILE3 (one condition of FILE 3 as FILE3 has 2 conditions) and FILE2, it creates both files.
If I have both condition for FILE3 and FILE2, it creates FILE3 with only one condition and FILE2.
If i have condition for FILE1, FILE2 and both conditions for FILE3, it creates FILE1 and FILE2 both no FILE3 at all.
I guess the problem might be that I have same message type for both conditions for FILE3 but I m not sure. Let me try by creating seperate message type for both and see. But is there any other problem?
Yash

Condition for interface determination

Dear all,
I would like to choose a target inbound interface depending on values in a field.
The problem is, that the source field has occurency 0...unbounded so that I check
the same field twice.
Example:
/TestMessage/Field1 = "A"
AND
/TestMessage/Field1 = "B"
To route the message to the desired inbound interface we need at least two occurencies
of source field "Field1". One with value "A" and one with value "B".
But he seems to check if Field1 is "A" and "B" so he will never use the desired inbound
interface. Do I have a chance to check values of two occurencies of one field or do I need
to use enhanced interface determination?
Thanks
Chris

Hi Christian,
You interface determination condition should work. e.g for one of my interface I am using following interface determination condition to send the msg to specific inbound interface.
(/p1:MT_Input/Recordset/row/Key = 10 AND /p1:MT_Input/Recordset/row/Key = 20)
The condition check if there is any "Key" with value 10 and othet with value 20 and then only it selects the desired output
inbound. The order of value 20 and 10 doesnt matter. Also only when both the values are there, then also inbound interface is
selected.
Can you provide your sample payload here?
Pooja Pandey

Condition in Interface Determination

Hi
I have two interfaces clubbed together. The output is an Idoc and the same Idoc is sent to two interfaces. The Business Sytem is same for both receivers. The Idoc has to be sent only to both reveiver interfaces if the EKORG is one and I have put that condition in Receiver Determination and its working fine.
Now, I have two interfaces and one of the interface has an additional condition. If only a particular Idoc field has values either 12 or 20. So how do I incorporate it ? Should I go to the Configured Inbound Interfaces under Interface Determination, select the Interface and use " OR " there ?
Regards

I didn't understand how to create the OR operand
You need to make use of the Insert Group option....it is mentioned in this help link
http://help.sap.com/saphelp_nwpi71/helpdata/EN/67/49767669963545a071a190b77a9a23/content.htm
You can even enter the condition manually in the condition editor...for more info check the blog by Shabharish.
Regards,
Abhishek.

Error while specifying condition in Interface Determination

Similar Messages

Maybe you are looking for