Error while starting the instance while using ASM
I used the following steps to work with ASM concept.
1)To create an ASM instance first create a file called "init+ASM.ora" in the "/tmp" directory containing the following information.
INSTANCE_TYPE=ASM
2)Next, using SQL*Plus connect to the ide instance.
export ORACLE_SID=+ASM
sqlplus / as sysdba
3)Create an spfile using the contents of the "init+ASM.ora" file.
SQL> CREATE SPFILE FROM PFILE='/tmp/init+ASM.ora';
File created.
Finally, start the instance with the NOMOUNT option.
SQL> startup nomount
SQL>
ORA-29701: unable to Connect to Cluster Manager
Please help me in this regard
Ya I have done that
and i tried to create diskgroups as follows
CREATE DISKGROUP disk_group_1 NORMAL REDUNDANCY
FAILGROUP failure_group_1 DISK
'/disk1/diska1' NAME diska1,
'/disk1/diska2' NAME diska2
FAILGROUP failure_group_2 DISK
'/disk2/diskb1' NAME diskb1,
'/disk2/diskb2' NAME diskb2;
ORA 15018:diskgroup cannot be created
ORA 15031:disk specification '/disk1/diska1' matches no disks
ORA 15031:disk specification '/disk1/diska2' matches no disks
ORA 15031:disk specification '/disk2/diskb1' matches no disks
ORA 15031:disk specification '/disk2/diskb2' matches no disks
How can I proceed further
Similar Messages
-
Hi All,
I am facing below mentioned error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element
Error: 1 (Field level error)
SegmentID: NTE
Position in TS: 70
Data Element ID: NTE02
Position in Segment: 2
Data Value:
3: Too many data elements
For Eg: NTE*GEN*My Text *goes here
Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
Can it be done?
Thanks.Sorry, no.
X12 does not support an escape character so whatever is used for delimiters become reserved characters.
If you want to allow '*' in the data, you will have to chooser a different Element delimiter. The receiver should read the from this from the ISA Segment so it's supposed to be dynamic but that's not always the case in practice. -
Error while using the export utility
Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz -
Dear GRC experts,
After upgrading GRC 10 to SP14, assigning manual passwords during the approval of a request, the approval process is failing.
Here is the scenario; your advice will be appreciated.
Task: Manually assign passwords to multiple systems contained in the request
Where: On the access request, go to “User System Details” tab
Issue: After approving/submitting the request, the error “Database error while using the secure store” is generated
Logs: Nothing on transactions SLG1 or ST22; however ST11 shows the error attached below:
This is the failed approval of the request:
Other scenarios executed as a workaround, and passed the password assignment this time:
The approval will work if only one password is assigned to any of the given systems. The rest of the systems get an auto-generated
password.
ARM also accepts multiple passwords when the requestor assigns passwords on the “User System Details” prior submitting a
request. The GRC admin can approve once reached for system approval.
AS FYI, “Confirm Password” is only required when creating the request but not on any other stage.
System information:
-Netweaver 7
-GRCFND_A SP14
-GRCPINW SP13
Regards,
GustavoSAP just delivered a note to fix this issue. The number is 2022294.
-
ORA-01034: ORACLE not available error while creating ASM or database
Hi all,
I am using oracle database 10gR2 on windows 2000 pro system.
I have Installed oracle software and there was no issue with that but now I am facing ORA-01034: ORACLE not available error while trying to create asm instance or even while creating database through dbca.
I have tried creating the asm instance manually and it was succeeded. Also database creation was successful through manual steps.
Any idea guys?? How to resolve this issue??Hi FK,
On Windows, it can sometimes mean that the services are not running. I have a check here:
http://www.dba-oracle.com/t_check_verify_windows_services.htm
Have you tried using oradim?
http://www.dba-oracle.com/tips_oradim_utility.htm
The oradim utility provides more than just the ability to start and stop Windows databases. Windows oradim can create and edit databases. It also allows DBAs to configure script-based installation mechanisms.
The oradim utility is used on the Windows platform to perform these tasks.
C:\oracle9i\bin\oradim -startup -sid ORCL92 –usrpwd manager
-starttype SRVC,INST -pfile C:\oracle9i\admin\ORCL92\pfile\init.ora
• startup – Indicates that the specified instance should be started.
• sid – The SID of the database to start.
• usrpwd – The password for the database user.
• starttype – Specifies whether to start the instance, the service, or both
Hope this helps. . .
Don Burleson
Oracle Press author -
OSB: Cannot acquire data source error while using JCA DBAdapter in OSB
Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PMHi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
</default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
<connection-properties>
<properties>
<property>
<name>xADataSourceName</name>
<value>jdbc/SOADataSource</value>
</property>
<property>
<name>dataSourceName</name>
<value></value>
</property>
<property>
<name>platformClassName</name>
<value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
</property>
</properties>
</connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
3-1674105521 Multiple Paths error while using Bridge Table
https://support.us.oracle.com/oip/faces/secure/srm/srview/SRViewStandalone.jspx?sr=3-1674105521
Customer Smiths Medical International Limited
Description: Multiple Paths error while using Bridge Table
1. I have a urgent customer encounterd a design issue and customer was trying to add 3 logical joins between SDI_GPOUP_MEMBERSHIP and these 3 tables (FACT_HOSPITAL_FINANCE_DTLS, FACT_HOSPITAL_BEDS_UTILZN and FACT_HOSPITAL_ATRIBUTES)
2. They found found out by adding these 3 joins, they ended with circular error.
[nQSError: 15001] Could not load navigation space for subject area GXODS.
[nQSError: 15009] Multiple paths exist to table DIM_SDI_CUSTOMER_DEMOGRAPHICS. Circular logical schemas are not supported.
In response to this circular error, the developer was able to bypass the error using aliases, but this is not desired by client.
3. They want to know how to avoid this error totally without using alias table and suggest a way to resolve the circular join(Multiple Path) error.
Appreciated if someone can give some pointer or suggestion as the customer is in stiff deadline.
Thanks
TeikThe strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3" 5.406 KB 1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use. -
Run time error while using Class gcl_error
Hi All,
I am getting run time error while using class gcl_error
type REF to zsreport_error_handling:
'' Attempt to access a component using 'NULL' object reference (points to nothing).
An object reference must point to an object ( an instance of a class) before you can use it to access components ( variable : ''GCL_ERROR'').
Either the reference point has not yet been set or it has been reset to 'NULL' by a clear statement."
Can you please suggest any solution for this ?
Thanks in advance.Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
WA_AVBBD-APOMOBILE
DA_SUBRC
DA_UPDKZ
DA_VVBBD_TABIX
0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson -
Inconsistent FOTY0001: type error while using translateFromNative
I am getting FOTY0001: type error while using translateFromNative function in assign activity.
This error happens only in the below scenarios:
1. Create a BPEL process with file input adapter that accepts simple xml string as input and accepts files like input*.txt.
2. Create a simple XSD(Fixed Length native XSD) and convert the simple string to XML using translateFromNative function and copy it into a variable.
3. Switch off the process
4. Put atleast 10 input*.txt files in the folder and switch on the process.
This error doesn't happen when I put one file at time.. Even when I put multiple files, the error happens for few instances inconsitently.
Here is our assign activity
<assign name="Assign_1">
<copy>
<from variable="PlantChemMsg" part="Chemistry"
query="/ns2:Chemistry/ns2:chemistryString"/>
<to variable="tempChemistryString"/>
</copy>
<copy>
<from expression="ora:translateFromNative(bpws:getVariableData('tempChemistryString'), 'ChemistryLegacy1.xsd', 'Root-Element')"/>
<to variable="ChemistryOut" part="Root-Element"
query="/ns8:Root-Element"/>
</copy>
</assign>
Here is the error in group log:
ORABPEL-09500
XPath expression failed to execute.
Error while processing xpath expression, the expression is "ora:translateFromNative(string(bpws:getVariableData('tempChemistryString')), 'ChemistryLegacy1.xsd', 'Root-Element')", the reason is FOTY0001: type error.
Please verify the xpath query.
at com.collaxa.cube.xml.xpath.BPELXPathUtil.evaluate(BPELXPathUtil.java:206)
at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.evalFromValue(BPELAssignWMP.java:679)
at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.__executeStatements(BPELAssignWMP.java:143)
at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:195)
at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3705)
at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1654)
Any help would be appreciated. Thanks.
-SridharJames,
Thanks & Sorry for the late reply.
I used assign activity just because I have only one source and target element.
This error happens even with transform activity.
Also, all the input messages are same. So It is definitely not the issue with the input message.
One observation I did is:
The error doesn't occur when I use like below(Full Http url):
ora:translateFromNative(string(bpws:getVariableData('tempChemistryString')), 'http://psc-d674943.hdq.uss.com:7777/orabpel/default/TestTranslateFromNativeError/1.0/ChemistryLegacy1.xsd
', 'Root-Element')
But occurs when I use like below.
ora:translateFromNative(string(bpws:getVariableData('tempChemistryString')), 'ChemistryLegacy1.xsd', 'Root-Element') -
Deplyment error while using service reference
Hi All,
I'm facing similar error where I get the following error when i try to run the application.
Following error i get when i try to deploy
Failed to prepare application ''sap.com/asp_all_sites'' for startup. Reason= Clusterwide exception: Failed to start dependent service ''PORTAL:sap.com/com.sap.compatibility50.cache.cache'' of application ''sap.com/asp_all_sites''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
I have added this in Sharing references but yet it doesn't help me. I'm using ICacheService in my code.
This **URGENT** Deplyment error while using service reference i was following but could not arrive at any result
Please advise
Thanks
SrikantHi All
I'm getting following error whenever I deploy:
11-dec-2007 18:03:17 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] WARNING:
[009]Deployment finished with warning
Settings
SDM host : aixlp203
SDM port : 52618
URL to deploy : file:/C:/DOCUME1/sdurgama/LOCALS1/Temp/temp24205sap.com~zsp_all_sites.ear
Result
=> deployed with warning : file:/C:/DOCUME1/sdurgama/LOCALS1/Temp/temp24205sap.com~zsp_all_sites.ear
Finished with warnings: development component 'zsp_all_sites'/'nl.essent'/'local'/'20071211180226'/'0':Caught exception during application startup from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Error occurred while starting application nl.essent/zsp_all_sites and wait. Reason: Clusterwide exception: server ID 263194450:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application sap.com/zsp_all_sites cannot be started. Reason: it has hard reference to resource com.sap.portal.compatibility50.cache with type application, which is not active on the server. at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:580) at com.sap.engine.services.deploy.server.ReferenceResolver.processMakeReference(ReferenceResolver.java:399) at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:328) at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:162) at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:136) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292) at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342) at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126) at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4707) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4612) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4585) at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:215) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
The things I have done so far:
1. Deployed the custom library and refered in library references. Its the same name as it is Visual Admin
2. Added Cache API Jar file as external Jar file; added the Sharing reference and also all the steps mentioned in the following link:
Webdynpro DC and J2EE DC
3. The DC builds properly but fails at deployment
My question is there any way that I can manually start the service.
I find the application in Server >> Services >> Deploy is with invalid kind of symbol (neither blue checked symbol / red cross symbol). How do I restore the application
I using ICacheServices in my code using Sharing references
like (ICacheService)WDPortalUtils.getServiceReferences("com.sap.compatibility50.cache.cache"). is this right
Please let me know
Thanks in advance
Srikant -
I am getting a error while using CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
The error is class "CL_SSF_XSF_UTILITIES is unknown. How to correct that?? please help I am new to object oriented programming??
Edited by: priya singh on Nov 18, 2008 2:14 PMThis is my code.
REPORT ZSAVE_FUNCTION .
D A T A D E C L A R A T I O N S *
DATA: v_bitmap TYPE xstring, "graphic data
v_file TYPE string, "file name
v_length TYPE i. "length of binary file
DATA: BEGIN OF it_bitmaps OCCURS 0,
object TYPE tdobjectgr, "object
name TYPE tdobname, "name
id TYPE tdidgr, "id
tdbtype TYPE tdbtype, "graphic type
END OF it_bitmaps.
DATA: itab TYPE TABLE OF x.
*class cl_ssf_xsf_utilities definition.
public section.
methods : get_bds_graphic_as_bmp
DATA: L_GRAPHIC_XSTR TYPE XSTRING.
*method cl_ssf_xsf_utilities
S E L E C T I O N - S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_object TYPE tdobjectgr, "object
p_btype TYPE tdbtype, "graphic type
p_name TYPE tdobname, "name
p_id TYPE tdidgr. "id
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: p_file TYPE rlgrap-filename. "file name
SELECTION-SCREEN END OF BLOCK b2.
*A T S E L E C T I O N - S C R E E N O N V A L U E - R E Q U E S T *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_name.
*-- Creating f4 help for the parameters
PERFORM get_f4_object_name.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*-- Getting the current value entered
PERFORM get_current_value.
*-- Value Request Functionality For Input File Name
PERFORM f4_value_request.
S T A R T O F - S E L E C T I O N *
START-OF-SELECTION.
*--Getting the graphic as a BMP file
PERFORM get_graphic_bmp.
*--Convert the Xstring format to binary format
PERFORM convert_to_binary.
*--Download the graphic
PERFORM download_graphic.
*& Form get_current_value
Get the current file path entered
FORM get_current_value .
DATA: BEGIN OF li_dynp_value_tab OCCURS 0.
INCLUDE STRUCTURE dynpread.
DATA: END OF li_dynp_value_tab.
DATA: l_program_name LIKE d020s-prog,
l_dynpro_number LIKE d020s-dnum.
l_program_name = sy-cprog.
l_dynpro_number = sy-dynnr.
REFRESH li_dynp_value_tab.
li_dynp_value_tab-fieldname = 'P_FILE'.
APPEND li_dynp_value_tab.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = l_program_name
dynumb = l_dynpro_number
TABLES
dynpfields = li_dynp_value_tab
EXCEPTIONS
invalid_abapworkarea = 04
invalid_dynprofield = 08
invalid_dynproname = 12
invalid_dynpronummer = 16
invalid_request = 20
no_fielddescription = 24
undefind_error = 28.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE li_dynp_value_tab INDEX 1.
p_file = li_dynp_value_tab-fieldvalue.
ENDFORM. " get_current_value
*& Form f4_value_request
Provinding the f4 for the given path
FORM f4_value_request .
*-- if the file is to be downloaded to presentation server
CALL FUNCTION '/SAPDMC/LSM_F4_FRONTEND_FILE'
EXPORTING
pathname = p_file
CHANGING
pathfile = p_file
EXCEPTIONS
canceled_by_user = 1
system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_value_request
*& Form GET_GRAPHIC_BMP
Get the graphic as a BMP file
FORM get_graphic_bmp.
CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
EXPORTING
p_object = p_object
p_name = p_name
p_id = p_id
p_btype = p_btype
RECEIVING
p_bmp = L_GRAPHIC_XSTR
EXCEPTIONS
not_found = 1
internal_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " GET_GRAPHIC_BMP
*& Form CONVERT_TO_BINARY
Converting the xstring to binary format
FORM convert_to_binary .
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = v_bitmap
IMPORTING
output_length = v_length
TABLES
binary_tab = itab.
ENDFORM. " CONVERT_TO_BINARY
*& Form DOWNLOAD_GRAPHIC
Download the graphic
FORM download_graphic .
v_file = p_file.
CONCATENATE p_file '.BMP' INTO v_file.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = v_length
filename = v_file
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DOWNLOAD_GRAPHIC
*& Form GET_F4_OBJECT_NAME
Get F4 values for object names
FORM get_f4_object_name .
DATA: dynpfld_mapping TYPE STANDARD TABLE OF dselc WITH HEADER LINE,
return_tab TYPE STANDARD TABLE OF ddshretval WITH HEADER LINE.
*--Selecting the values to be provided as f4 help
SELECT tdobject
tdname
tdid
tdbtype
FROM stxbitmaps
INTO TABLE it_bitmaps.
*--To update the values in the remaining fields
dynpfld_mapping-fldname = 'F0001'.
dynpfld_mapping-dyfldname = 'P_OBJECT'.
APPEND dynpfld_mapping.
dynpfld_mapping-fldname = 'F0002'.
dynpfld_mapping-dyfldname = 'P_NAME'.
APPEND dynpfld_mapping.
dynpfld_mapping-fldname = 'F0003'.
dynpfld_mapping-dyfldname = 'P_ID'.
APPEND dynpfld_mapping.
dynpfld_mapping-fldname = 'F0004'.
dynpfld_mapping-dyfldname = 'P_BTYPE'.
APPEND dynpfld_mapping.
*--Providing f4 help with the selected values
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'TDOBNAME'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_NAME'
value_org = 'S'
TABLES
value_tab = it_bitmaps
dynpfld_mapping = dynpfld_mapping
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " GET_F4_OBJECT_NAME -
Error while using BAPI_SAG_CREATE
Hi,
I'm getting the below error while using using BAPI_SAG_CREATE :
No instance of object type PurchSchedAgreement has been created. External reference: # 1
I'm trying to cerate scheduling agreement. If anyone has worked on similar issue, plz advise.
Thanksclosed
-
Error while using P2V in Oracle VM 2.2 version
Error while using P2V in Oracle VM 2.2 version
I tried using this option by using the steps given on one link but it didnt worked...
Error:
code 404, message No permission to list directory.
I ve tried giving full permissions on for /OVS on Server but invain.
Can U pls help me...
Thanks in advance.
Edited by: user10310678 on Sep 16, 2009 3:32 AMuser10310678 wrote:
I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work. -
Error while using UTL_FILE
I am getting the following error while using UTL_FILE procedure while using UTL_FILE.FOPEN procedure
from system account. I am using Windows XP with NTFS.
SQL> create or replace directory FILE_DIR as 'C:\'
2 /
Directory created.
SQL> grant read on directory FILE_DIR to public;
Grant succeeded.
1 create or replace PROCEDURE file_upload IS
2 v_file_name VARCHAR2(200);
3 v_file_type UTL_FILE.FILE_TYPE;
4 v_line VARCHAR2(1000);
5 BEGIN
6 v_file_name := 'customers_'||TO_CHAR(SYSDATE,'dd')||TO_CHAR(SYSDATE,'MON')||TO_CHAR(SYSDATE,'YYYY')||'.txt';
7 v_file_type := UTL_FILE.FOPEN('FILE_DIR','V_FILE_NAME','r',1000);
8 UTL_FILE.GET_LINE(v_file_type,V_LINE,1000);
9 UTL_FILE.FCLOSE(v_file_type);
10 DBMS_OUTPUT.PUT_LINE(V_LINE);
11* END;
SQL> exec file_upload;
BEGIN file_upload; END;
ERROR at line 1:
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation
ORA-06512: at "SYSTEM.FILE_UPLOAD", line 7
ORA-06512: at line 1
I appreciate if someone can help me in this regard.
Thanks in Advance.
Regards
Muhammad ALiHello,
What exactly are you trying to do? Here I got 2 examples for you , replace with your directory name and pick right option for 'a' (append) or 'w' (write) or 'R' (read).
To read from a directory_ . This will read an existing file 'customer.txt" from the directory
{code}
CREATE OR REPLACE PROCEDURE .file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'R');
UTL_FILE.get_line (v_file_type, v_line); -- Error was here
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
_*To open a file*_ This will create customer_XXXXX file under the directory
{code}
CREATE OR REPLACE PROCEDURE testme.file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers_'
|| TO_CHAR (SYSDATE, 'dd')
|| TO_CHAR (SYSDATE, 'MON')
|| TO_CHAR (SYSDATE, 'YYYY')
|| '.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'a');
UTL_FILE.put_line (v_file_type, v_line);
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
Regards
Edited by: OrionNet on Jan 29, 2009 12:30 AM -
Error while using LabVIEW 8.2.1 Dll from Visual C++ 6.0
I am getting an error while using a LabVIEW 8.2.1 dll from Visual C++ 6.0 application. This is what I am doing:
1) Created a dll using LabVIEW 8.2.1 (I used a tutorial from NI knowledge base: "Creating DLLs from 6.0i". It is a temperature conversion VI; input DegreeF and get DegreeC out). Instead of LabVIEW 6.0i, I used 8.2.1. It created the dll Convert_Temp.dll successfully.
2) Then I created a Visual C++ 6.0 application (used a tutorial from NI knowledge base: "Calling a DLL from Microsoft Visual C++ that was Generated by LabVIEW 6i). I could build the project and create an executable application F_To_C.exe.
3) Then copied the LabVIEW dll Convert_Temp.dll into the folder where F_To_C.exe resides. Using windows explorer, went into that folder, and executed the application. I got the following error:
System Error 998 while loading the LabVIEW run-time engine (C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\lvrt.dll).
Convert_Temp requires a version 8.2.1 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of Convert_Temp to correct this problem.
I checked the folder: C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\. It has the file lvrt.dll.
So why am I getting this error?
GKBsounds like you need to install the LabVIEW 8.2.1 runtime. Not the 8.2 runtime engine.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?
Maybe you are looking for
-
THIS INSTALLATION PACKAGE COULD NOT BE OPENED, VERIFY THAT THE PACKAGE EXIS
I just purchased an IPod, now I cannot install I Tunes on my vista pc. No matter how many times I try, it says, the installation package could not be opened, please verify that the package exists and that you hav the right to access it. contact the v
-
How to do a specific text warp effect I'm envisioning - CS4?
This is one of those things I feel sure can be done if only I knew how. Picture a curving road from lower left to upper right, with perspective (narrowing from wide at the bottom to nothing at the top). I want to fill this shape with my text - one
-
Kernel Panic in Japan - Please Help!
Hi all, I just recently moved to Japan and my wife and I just bought iPhones 2 days ago. Before the Kernel message came, I was getting messages on the computer that read that 'sync' something was having trouble and did I want to report the problem?..
-
Dear Gurus, My customer want create a BOM to produce a material A with the material B. The problem is the material B used too the material A to be produced. We have no error message. SAP loop in the standard cost estimate and give a valuation for mat
-
Export Setting ?? Letterboxes on export...problematic
Hi, i know this probably has a really easy solution, but I have full quality, composite 720p .mov's exported from eyetv and upon inxpecting in quicktime, this video fills the 1280x720 frame size and is in perfect quality. Upon export from FCP in mpeg