Error while stock posting through template

Hi
im using stock taking tamplate for posting stock.after importing dtw shows no error, but when i observe the stock then the stock is not inserted.Whats the reason?how to solve it?
Thanks

Hi Krishna,
Actually when you import the data thru the oStock taking, then the data features in the
Inventory> Inventory Transactions> Initial Quantities......
in the Inventory Tracking tab page wih the counted check box ticked.
Then you update that and then open the same thru the stock posting tab and post by clicking on reconcile.
Now as a prior activity you should have the price list imported in the system. Before you update the counted quantities in inventory tracking, go to the initial quantities tab page and select the price list. The system will then take this price as the item cost to post in the inventory.
As a an activity to proceed, generally I would suggest that you take the item cost from the client, make a price list name "Item cost" and then import the price values for all the items.
Then you start the quantity import. So this price list is only for the stock posting purpose.
so to put in in a step wise schedule
1. Import price list and price values
2. go to Inventory> Inventory Transactions> Initial Quantities......
3. Initial quantities tab> and select the required price list for inventory posting
4. Import thru DTW (oStocktaking)
5. go to Inventory> Inventory Transactions> Initial Quantities......
inventory tracking tab> update
6. Inventory> Inventory Transactions> Initial Quantities......
stock posting tab> Reconcile
Then there will be a posting in the inventory gain which is an ofset entry for the import of opening balance. The same way you create an offset account during the update of BP opening balance. You may change the name to Opening balance offset and map that account during the time you reconcile the stock posting.
I hope this answers your query.
Regards,
Raj.

Similar Messages

Error while Stock Posting

Hi All
While posting the stock in the plant, I am getting the Error message that " Period 004/2007 is not open for account type S and G/L 399999.
In the diagnosis message is coming that Period 044 of the fiscal 2007 does not exist in table T 001 B either in period 1 or in period 2 of the table entry with the record type " 0", the selected company code, the account type S and the G/L account 399999. The period is therefore not open.
I have already closed the Fiscal period till 004 2007.
Could anyone help on this.
Regards
Vipin

Hi Steve,
Since I am doing this for my practice purpose so I am seeking help from the experts here.
I have gone to the T.Code screen OB52, there we have Account type +,A,D,K, S with each having their own period ranges. I had done the changes in the S type of the account to the correct period and my problem is still there. the changes i did are mentioned below. My question is is it required to change the posting period for rest of the account types as well.
And in the column To Period Indicates "16". Does this 16 indicates the special period for postng i.e 12 + 4 or what?. I am just writing the entries in the table for the reference,
Vart   Account Type    "From Account" "To Account"    "From Per1"   "Year"     "To Period" "Year"   "From Per 2"    "Year"    "To Period"     "Year"    "AUGR."
0001               S            -
                      ZZZZ                  1            2001     12            2004      13   2001        16    2007
And whats the meaning of period 1 and period 2..
Pls provide the answers to these questions. Thank you

Error while updating phone button template in CUCM 8.6

Experts,
I'm getting following error while updating phone button template in CUCM 8.6;
Update failed. java.sql.SQLException: System catalog (sysprocbody) corrupted.
Please check the screen shot attached here with.
What could be the reason?
Thanks
Vivek

I'm not a Cisco employee, so I can't do anything with your backup.!
You need to take a backup as a precaution (You should have been doing this anyway) Then you need to call Cisco TAC to get the underlying problem fixed. CalManager is a locked-down environment, and only TAC can get the low-level access needed to fix database problems.
GTG

Error while trying to copy template from another application

Hi,
I am getting this error while trying to copy template from another application:
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
This report is located here:
Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
best regards,

It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
I would just as a matter of course reset the TC to factory and redo its setup.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now.

Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")

I activated all 0* objects in BTMP and checked that they are all activated, but I found errors when opening the BEx Web Analyzer
Error messages :
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
ERROR: Command type SWITCH_AXES of object not recognized
ERROR: Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
So I ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version D report to check and choose validate.
Error messages :
Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.
Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.
Width of object item:GROUP_ITEM:GROUP_ITEM_1 is very small (1amp;1)
Query does not exist in the BI System (Object QU )
Cannot instantiate data provider
I also ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version A and got the following errors:
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
Parameter GENERAL_TEXT_ELEMENT of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Parameter GENERIC_TEXT_BINDING of object item:GROUP_ITEM:GROUP_ITEM_1 cannot be higher-level node of GENERAL_TEXT_ELEMENT
Item item:GROUP_ITEM:GROUP_ITEM_1 of type DROPDOWN_ITEM cannot be a parent node of DATA_PROVIDER_REF
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_POSITION
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_ONLY
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
What could be the problem?

hi,
Please look into this note let me it helps...url=https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=917950&_NLANG=E]Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web[/url]
check this link as well for [<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">Bex Web Configuration</a>
wht is the SP Level?
Nagesh Ganisetti.

Error while processing payment through F110

Hello
I am getting the following error while processing payment through F110
> Payment method selection for items due now to the amount of EUR          287.32-
> Payment method "Q" is being checked
> Bank details are being checked
>     Customer/vendor bank details are being checked
>   System reads house banks and checks if they are allowed
> Our bank BBVA is being checked
> Bank different from the specified bank CAIXA in master record or items
>   House bank is selected ...
> No permitted payment method exists
Information re. customer 220912 / paying company code ES4 ...
... payment not possible because of reported error
I have created one payment method "Q" & in ranking order only House bank given as BBVA. I m not able to under stand where to make correction to make this resolved

Check if different House bank is assigned in Customer Master record - Co code - Payment transactions.

Error while check printing through f-58

Error while check printing through f-58 is showing following for company code xxxx
1. Fiscal year variant z4 not defined or maintained for date 01/06/08 .
(Fiscal year variant Z4 not defined or maintained for date 01/09/2009
Message no. GMMASTERDATA108)
2.the payment made is not recorded in the SAP system.
when you see the print preview of check then in plase of amount and invoice date its showing as
Kindly refer tthe payment advice for the invoce details.
Is there any solution to this?
Regards,
Yojana.

Hi,
i have check periods are open till 2010.
and parameters for fiscal year variant are also correct.
In FBZP i have check configuration there is no prob in it.
any solution on this?
Regards,
Yojana.

Error while working samba through Windows XP+SP2

Subject: Error while working samba through Windows XP+SP2
Hi,
I have problem with SAMBA Server on SOLARIS 10.0 while browsing shares through MS Windows XP Pro + SP2.
Descriptions:
1) SAMBA Configuration:
#==== global settings ======
[global]
security = user
hosts allow = 192.168.9. 200.0.0. 127. 127.0.0.1
unix password sync = yes
remote announce = 200.0.0.255/Workgroup
192.168.9.255/workgroup
remote browse sync = 200.0.0.255 192.168.9.255
restrict anonymous = yes
root directory = %H
deadtime = 5
#==== shares ======
[homes]
comment = Directory for User: %U
browseable = no
writable = yes
[%U]
comment = Private Directory for User: %U, R.Host: %m
path = %H
valid users = %U
browseable = yes
read only = no
profile acls = yes
[temp]
comment = Temporary file space
path = /tmp
read only = no
public = yes
2) This configuration tested with MS Windows 2000 family and Windows XP Pro+SP2
When I'm going to browse server by windows family stations, server asked for username/password, after authentication on both clients (Win XP and Win 2000) the share list appears correctly. for browsing shares contents through windows 2000 I have no problem but when i want to browse shares contents with windows xp+sp2 error message appears with "Access denied." subject.
How can I solve this problem?
Any help would be greatly appreciate.
M.Chitsaz

UPDATE
i was able to connect and synced songs yesterday.
but when i tried it again today. i cant connect again.
i tried to disconnect and reconnect million times and i even dropped
my iPOD and now it has some scratch and i hate it.

QM error while GR posting-urgent

hi all,
We are getting Quality related error while posting GR.
ERRor message is :<b>Change the inspection stock of material in QM only</b>.
Have faced this problem ever before?
regards,
Shyam

hi mona,
i think the material with which u r trying to do the gr has QM view uptodated i material master.
if that is the case then u cannot directly place the material in unrestricted use.
u have to go through the user decision and then place the material in the respective stock.
regards,
indranil

ERROR IN STOCK POSTING

while doing stock posting I am getting the bellow error T.code:MB1C
(Period 004/2014 is not open for account type S and G/L 799999)
Discussion locked.
Reason:
1. Basic question. Please put some effort in search & trail, before you post your query as discussion and explain your effort & understanding on that. Don't treat SCN as training center or help center.
2. Don't post all CAP in subject title
Please review SCN Rule of Engagement(RoE) and adhere them in your future post/conduct in SCN.
Message was edited by: Jyoti Prakash

MATERIAL 419 DOES NOT EXIST IN WAREHOUSE AP " this error is generated when you make a transfer posting from material to material in inventory management and simultaneously change the plant.
Solution: Maintain the Material master record of the material in the current plant only. Please also check the warehouse assigned to the plant and whether it has multiple assignments.
award points if helpful

Error while executing query through rsrt

hello experts,
I am facing following error while executing one HR query through rsrt.
"System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text) "
while executing query through rsrt it automatically goes to debug mode, coming out of debug mode i get the screan showing above error message.
What would be an issue?
Regards,
Nirav
Edited by: Nirav Shah on Apr 21, 2008 8:19 AM

Hi ramesh,
I havent kept any execlusion selection. Though i saw long text, it is like this:
"Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Notification Number BRAIN 299 "
Regards,
Nirav

Stock posting through mb1b

Hi gurus,
My client manufactures 10 steel plates from 1 slab.Every plate has different batch no.In material master QM view is maintained.
Clients requirement is that he must be able to do stock posting for all batches through MB1B mvmt type 321 after Result Recording.But when we try to do this we get error message posting can be done through QM only.
Is it possible to do stock posting for automatically created lots through MB1B.
Regards
Amit

Hi Amit,
Since quality management is active for the said material, you cannot use MB1B transaction to post until you make a decision on the usage of the material/batch.As you have mentioned, these inspection lots are stock-relevant or these were created automatically as a result of goods movement. This setup were defined in the Quality management screen (inspection set-up).For you to make posting stocks from quality, you need first to release the materials by QA11 whether you are to accept or reject. In QA11, you can then post the stocks to other stock types manually or automatically. Hope this helps.
Edited by: Jay Pee Salilig on Oct 5, 2008 5:21 PM

Message no. QA495 error while doing migo through movement type 322

Dear Experts,
Please help.
I searched for this content but didn't get content matching my requirement.
I am trying to do stock transfer through movement type 322 when this error message is stopping me from posting the document.For this material inspection set up is active.
I want to transfer the stock from unrestricted area to quality inspection stock.Can you please suggest how to transfer the stock from unrestricted to quality inspection for this material.Can I do it with some t.code in QM.
If so please guide me how to transfer the stock.
Kind regards,
Pradeesh.P

Hi,
Basically, system is preventing you from managing stock of QM controlled material through non-QM transactions. You must be getting this error "Change the inspection stock in QM only"
You can post this quantity into QI via two methods,
Activate inspection type 08 for this material and then do the 322 mvmt. This will move the quantity into QI with an additional inspection lot of 08 origin.
Take complete quantity out of QI, Deactivate existing 'Stock relevant' inspection types and then do the 322 mvmt.
I'll suggest you to go with first option as it is more feasible and convenient.
And, this issue has been discussed several times and there are plenty of threads available on this. Im not sure why didn't you find any
ntn

MII 14.0 SP4 :Migration error while importing SAP BM Templates

Hi Experts,
I am facing some migration errors while importing SAP Batch Manufacturing Templates into MII 14.0 SP4.
There are almost 23 transactions which are not getting imported and the error message for all of them is-
"Unable to migrate transaction Unable to import file
<Name of the Transaction>"
Any first hand experiences will be really helpful for me to proceed further.
Regards,
Muddassar Khan

Hi All,
Got the solution. The STARTUP.BAT file is been placed in the installation directory(usr/sap) and then it works fine. Also I have installed the patches and all working fine.
Any way thanks for the answer christian libich.
Regards
G.Partheeban

Error while Loading data through .csv file

Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak

1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak

Error while stock posting through template

Similar Messages

Maybe you are looking for