Error while storing
good day all i am facing problem while storing more then 4000 char in a table whose datatype is varchar2(4000)
we use long datatype to solve this however while storing and retreiving we are facing the problem can any one assist ,
appreciate your anticipation with your earliest
Regards
Obviously, you can't store more than 4000 characters in a varchar2(4000) column. Storing your data in a LONG column will solve this, though I'd highly recommend using CLOB rather than LONG. Oracle will probably drop the LONG type at some point since CLOB is so much nicer.
Can you provide the precise error you're getting (including the ORA-xxxxx error number)? If you cuold post the code that's causing the error as well, that would be helpful.
Justin
Similar Messages
-
Independent of the movie storing method (MPEG - PAL DVD-Standard, etc.) I always get an error message "Error during export: Error during creation of the movie. Unknown error," at the end of the process. I have enough RAM (4 GB) and disk space (555 GB). The operating system is Windows 7 Professional 32bit. I am using the new Adobe Premiere Elements 13 version. Please help me - I have no idea about the solution ... Thanks in advance.
A.T. Romano,
thanks for your support in advance.
The movie source with his properties is coming from a Audials 11 recorded wmv-file according to below screenshot (no HD quality).
I tried multiple times the automatically Premiere default settings without individual adjustments in the two below screenshots.
In below settings screenshots you can also see the answer to your 3rd question. -
Error While checking in and storing:I\DESIGN\Phase PDF\N 2389. pdf
Dear Experts,
I am getting the above shown error while storing the PHD doc.
we are using content server.
Even we checked Authorization object missing it is also correct.
Message No:26253
What might be the problem?
Please guide me
Regards
HonyalHi,
please check all the services of the SAP content server by a basis guy or the administrator who lokks after the servers.. If any of the services are stopped then restart the service.
If any one of the services are not available, then though the connection test to server shows ok the files will fail to check in
Regards,
T T Subudhi -
Error while checking in and storing
Dear All
I am trying to attaching a file using CV01n, when i am doing for check in - i am getting following error message
Error while checking in and storing
Message no. 26253
What may be the issues, even my my repositories working fine ( configured contentserver, status is active)
Regards
chandraDear Chandra,
please check in transaction OACT if the storage category is assigned to the correct content repository. Further please read also through notes 707568 and 833576.
Best regards,
Christoph -
ORA-03111 - JCA Binding error while invoking a stored procedure in DB
Hi,
We are facing this problem for one interface alone.
Need expert advice to fix this problem..
This is scheduled to run once in a day and fails daily for past 2 weeks..
We receive below error as response..
Same interface worked fine for past 1 yr..
Also it works fine if we reprocess the batch in next day morning...
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DB_Legacy_To_EBS_Invoice_Conversion' failed due to: Stored procedure invocation error. Error while trying to prepare and execute the IRSOA.AR_SOA_INVOICE.TRN_GET_CUST_INV_RAW_TO_STAGE API. An error occurred while preparing and executing the IRSOA.AR_SOA_INVOICE.TRN_GET_CUST_INV_RAW_TO_STAGE API. Cause: java.sql.SQLException: ORA-03111: break received on communication channel ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
AND
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DB_Legacy_To_EBS_Invoice_Conversion' failed due to: Stored procedure invocation error. Error while trying to prepare and execute the IRSOA.AR_SOA_INVOICE.TRN_GET_CUST_INV_RAW_TO_STAGE API. An error occurred while preparing and executing the IRSOA.AR_SOA_INVOICE.TRN_GET_CUST_INV_RAW_TO_STAGE API. Cause: java.sql.SQLException: ORA-01013: user requested cancel of current operation ORA-06512: at "IRSOA.XXIR_AR_SOA_CUSTOMER_INVOICE", line 213 ORA-06512: at line 1 ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution
Thanks,
SundaramLooks like the SQL might be taking a longer time to execute and might be timing out.
Please refer the following:
Re: ORA-01013: user requested cancel of current operation
http://www.dba-oracle.com/t_ora_01013_user_requested_cancel_of_current_operation.htm
Additionally, ORA-06512 indicates that there is a mismatch of the with the data length that is being processed. Refer http://www.techonthenet.com/oracle/errors/ora06512.php
Hope this helps.
Thanks,
Patrick -
Error While Checking In & Storing
Hi Guru's
There are some documents which are stored in our legacy system.We are trying to transfer documents from legacy to ECC6.0 through java connector.
In java program we have done the coding by calling the function module BAPI_DOCUMENT_CREATE2.When we run the java program we are getting the error as Error while checking in and storing although we have defined the storage category
While if we run the same java program by defining the storage category as SAP-System, documents are getting uploaded in 4.6 system and we are unable to find out the Storage category SAP-SYSTEM in 4.6 system
Kindly let me know how to resolve this issue or is there any way to transfer documents from legacy to ECC 6.0
Regards
BhanuHi Bhanu
Is it error No 26253 correct me if I am wrong.
If this is the error the check with basis administrator. Log space must be full or content server must be down due to some reasons.
With Warm reagards
Mangesh Pande -
Error while checking in and storing: C:\Documents and setting*
hI,
I hace install the content server and i made content repository also.
everything I made on development server, and the original application file is getting check in also.
now when I tried to check in it in test sever, it giving me error like Error while checking in and storing: C:\Documents and setting
I transported all request like content repository and all to test server from development server.
regards,
nitinHi, Nithin,
Check this also in development
In your local machine Goto
C:\windows\system32\drivers\etc
There will be file called "hosts"
in that file plz specify the IP of the content server.
Eg;
<IP address> <Content server name>
102.210.23.186 My Content server
Save the file.
Restart the machine and then try check-in the file in content server.
Regards,
Ben -
Error while checking in and storing document in storage category
Dear Consultants,
When i am trying to save a document in storage category thru tcode cv02n, its giving me error:-
Error while checking in and storing document "c:/desktop/content.doc",
while there is no error in csadmin and OAC0 tcode repository is in running status
even output of
dbmcli db_enum
OK
SDB /sapdb/SDB/db 7.6.03.09 fast running
SDB /sapdb/SDB/db 7.6.03.09 quick offline
SDB /sapdb/SDB/db 7.6.03.09 slow offline
SDB /sapdb/SDB/db 7.6.03.09 test offline
URL "http://192.168.2.11:1090/ContentServer/ContentServer.dll?serverInfo"
output :-
serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="7";serverBuild="23";pVersion="0046";serverStatus="running";serverDate="2011-12-14";serverTime="10:01:44";startUpDate="2011-12-14";startUpTime="06:36:18";lastAccessDate="2011-12-14";lastAccessTime="09:57:59";
contRep="ZCONT_TEST";contRepStatus="data(0%) log(191655552%)";pVersion="0046";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="localhost";security="1";contRepDescription="test content repositry";driver="MaxDB";defaultDocProt="";
contRep="ZDMS_C1";contRepStatus="data(0%) log(191655552%)";pVersion="0046";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="hpsebdev1";security="1";contRepDescription="Database storage documents";driver="MaxDB";
Please Help regading the issue
Regards
Gagan Sharma
Basis ConsultantHi,
Please revisit your DMS configuration. May be something is missing out in the configuration.
Additionally you can retry to chekin by changing the following parameter
security = 0.
Hope this is useful.
Regards,
Deepak Kori -
Error while checking in and storing: C:\Documents and Settings
Hi,
i have some problem in DMS , while doing Check in process after attaching documents in CV01n.
geeting error like "Error while checking in and storing: C:\Document and Settings.."
please suggest me how to solve this problem.
thx in advance...
Karthik.Hi Karthik,
There may be several factors contributing to this error.Some of these maybe:
-Storage category defined improperly/missing
-HTTP/FTP destination missing
-Incomplete Workstation application definition
-Incomplete Authorization
Please run through/search for each of these issues (discussed several times in the forum) and adopt corrective action wherever necessary.
Regards,
Pradeepkumar Haragoldavar -
Dear All,
I am working in an environment :
SAP ECC 6.0
Content server Version 6.4
I configured Content Repository, Content Category & Document Area in KPro.
I tried to test connection in OAC0, I am getting the message "Connection test for content repository XXXXXXXXXXXX was successful".
But when I tried to check in the docs in CV01N and while saving the DIR I am getting the error "Error while checking in and storing: C:\ ..... (Message no. 26253)".
Same time I can able to check in the docs to SAP DB.
Plz share your views to sort out my Issue.
Thanks & Rgds,
Sukan
[email protected]Hello David,
I assume you’re using windows contentserver.
sounds like a problem with the parameter maxAllowedContentLength of ISS.
Default value would be 30 MB
Check the limit:
C:\windows\system32\inetsrv\appcmd list CONFIG -section:requestFiltering
Set limit to 4 GB:
c:\windows\system32\inetsrv\appcmd set config -section:requestFiltering -requestLimits.maxAllowedContentLength:4294967295
resatart ISS and try again.
Best Regards
Andreas -
Error while checking in and storing: C:\Documents and Settings\Administr
Dear
Whille saving then document in dms , i am getting this error.....
Error message is : "Error while checking in and storing: C:\Documents and Settings\Administrator\My Documen...."
Message Number is 26253
R KarthikeyanHi all,
Similar kind of issue occurred in one of our webdynpro applications of SAP NetWeaver Portal-
The error message "Error while checking in and storing" was returned by the BAPI while trying to replace documents in the DMS Server via portal.
But the documents were getting stored in the back end by the use of standard T-Codes.
Later it was found that ABAP tables COMPONENTS & COMPONENT_DATA are inconsistent by looking into the HTTP trace file.
The HTTP patch "http.c#21" was being used in our server.
SAP suggested the below mentioned steps-
-->Download the most recent SAPHTTP version & install it.
-->Then delete the RFC connections SAPHTTP & SAPHTTPA through T-Code SM59
-->Regenerate them again with report RSHTTP05
They were carried out in our ECC server & the issue was resolved.
Please try them out if applicable in your case & let us know.
Thanks & Regards,
Shreyashri Kar -
Error while checking in and storing: C:Userscbt.abapDesktopLOP.XLS
Dear Friends,
I am trying to save the documnet in content server but getting the below error:
Error while checking in and storing: C:\Users\cbt.abap\Desktop\LOP.XLS
Message no. 26253
I hv checked CSADMIN certificate , is activated
In DC20 - i hv maintained data carrier type as PC for front end
and i hv all the authorizations, still I am getting this error
pl check and tell the steps to solve this issue.
regards,
Atul TulaskarHi Atul,
please see the information under http://wiki.sdn.sap.com/wiki/display/PLM/26253-Reasonforthiserror which should be useful to find out more about possible reasons for this error message.
Best regards,
Christoph -
Hi all,
I'm getting the following Error while checking in original to Content Server
"Error while checking in and storing: C:\Documents and Settings\user\Desktop" Message 26253
OAC0, OACT, CSADMIN settings seems to be Ok .
Settings in DMS SPRO - in dc10, dc20(data carrier used PC)- everything fine
-Authorization issues are not there
Earlier checking in was possible with same settings, but now we are getting this error.
From my end i had test the RFC Connection (SAPFTP, SAPFTPA, SAPHTTP, SAPHTTPA) through SM59 and its test run was successful. So the possibilty of RFC Failure was ruled out.
I knew this problem was arised as there is some issue in Content Repository, but not able to trace it out.
If any one knew what to do in this case, then let me know.
Secondly, what are the things need to be checked to identify the content repository Checking in Issue.
Regards,
S AnandError Resolved.
I had only executed the below command
./dbmcli on SDB>db_execute SET LOG AUTO OVERWRITE ON
OK
seems like Log file was full. but now its working.
Thanks for your suggestion.
Regards
S Anand -
Dear All,
I am working in an environment :
SAP ECC 6.0
Content server Version 6.4
PLM Integration AutoCAD 4.0
In AutoCAD Mechanical while Check in Drawing using KPro through CAD View I am encountering an error : "Error while checking in and storing C:\.........."
ACADM Log:
Command: _qsave Using configuration "SaveAsDialog" for document creation for
Drawing2.dwg.
Starting SAPGUI ...
Assigning file "C:\SapWorkDir\AcadM\SUKAN-TEST-7_DRW_000.dwg" to document
SUKAN-TEST-7/DRW/000/00.
Reading titleblock data for SUKAN-TEST-7/DRW/000/00...
Updating document info record SUKAN-TEST-7/DRW/000/00 ...
Command:
Command: _SAPCADDESKTOP2
Command: Working without change number.
Updating document info record SUKAN-TEST-7/DRW/000/00 ...
Reading titleblock data for SUKAN-TEST-7/DRW/000/00...
Updating document info record SUKAN-TEST-7/DRW/000/00 ...
The same ACAD Drawing I am able to check in through SAP Transaction CV02N.
Plz share your views to sort out my Issue.
Thanks & Rgds,
Sukan
[email protected]Sukan
Is the issue resolved.
Check in content repositories, just check if the repository which u tryin to Check In the document(CAD file) is giving u response..
i guess there must be some problem from server side.
just ask basis @ the same.
dont change config okk...
Niranjan -
Error while checking in and storing:Message no. 26253 - CV02N
Hi Friends
I have received the following error Error while checking in and storing:Message no. 26253 while check in of file in Content Server.
I have done all seeting such as Creation of content repository, Storage category.
Content server is also installed properly as per installation guide.
Is note SAP Note 1327343 applicable for me.
With Regards
Mangesh PandeChristoph Hopf
First thanks for the tip, my problem is that the Basis configured the server content in DMS because, will be used two servers.
I configured Data Carrier Sets / Sets date carrier type "server, front end".
Type (data carr.type) / Description / Path / CAD system / Online
80 / DMS Jundiai / Z_EMP_JD / 80 / X
I view an attached file in DMS normally, however when I make the check in Orig. the error occurs.
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 26729080"
Message no. CMS025
Diagnosis
Error in accessing via HTTP
500 (Internal Server Error)
" ;ODBC State 00000; Error Code 26729080"
An error occurred when calling module SCMS_DOC_CREATE_FILES
Message no. 1R579
Diagnosis
Exception number 6 occurred when function module SCMS_DOC_CREATE_FILES was called with document 00155D0216091ED1BE84D6471C796DB4.
Since ja thanks for the help
Márcio
Maybe you are looking for
-
Officejet 7000 networking problems with usb printer
connected up my new officejet 7000, replacing my deskjet 1280 on my pc, running xp sp3, networked on my work network. set up as shared printer. Showing on shared printer list on network, but when I try to install network printer on another machine on
-
CD icon will not show in the iTunes source list
My brother just got the 5G iPod and whenever he puts a cd into the drive, iTunes will not show that there is a cd in the drive. What's wrong?
-
Dear all, we have uploaded stock for the material and by mistake the batch management was active. but we reversed the stocks but still i am not able to deactivate batch management in material master Pl Guide how to deactive the batch management in MM
-
Cat 4000 Sup 1 and 2 rommon upgrade release notes?
I'm trying to find the release notes for the Cat 4000 sup 2 rommon upgrades. I've looked all over CCO but haven't been able to find them. In the release notes for CatOS 8.x, 7.x etc it tells you HOW to upgrade the rommon, but it doesn't tell you WHAT
-
GR cancel posted in SUS created 101 in backend
We are in SRM6.0 SP03. We have implemented SRM-SUS (extended classic scenario). When we cancel GR in SUS it creates reversal in SRM but it created 101 in backend. The IDOC is having 101. Please help. Thanks, Sachin