Error while syncing can not be erased and have gone to all articles and nothing has worked. Have tried to erase my data in the sync file and that can not be done - it says try again another time. What now?
Have gone into my snyc data file to erase all data - error says that it can not be done at this time. I still have the error while syncing on my bar. Have tried to get a new sync number and that will not change - it goes back to the original how can I start over and try again?
This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2
Similar Messages
-
I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt 2 KB
read_array.vi 21 KBThe problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does. -
Nothing is working on my 3rd gen ipod touch but the home button. It's not sliding or anything. I've tried resetting and restoring it. Did not work
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT4436 What is the maximum file size that can be attached to an outgoing email on my iCloud account?
What is the maximum file size that can be attached to an outgoing email on my iCloud account?
20mb, but I would suggest leaving a little space. 15 is reliable.
-
I have been trying to burn newly purchased (as well as last year purchases) ITunes to a disc. I had burned some of these songs to a disc last year and all went well. Now I have been getting this popup telling me that the AppleSync Notifier has stoped working & the corefoundation.dll needs to be re-installed. Also that Windows will try to fix the problem. Every time I try to burn the disc, the computer sends the disc back out and the screen tells me to put in a blank recordable disc. I have tried 4 different new discs now and the same thing happens.
I am running Windows Vista.
Have been to the Roxio web site for help as well as Apple.
Have tried many "fixes" such as: updating latest version of Direct X from the Microsoft website; Disabling startup items; going to local disc C and into the Apple/Apple Appplication support and right-clicking on the SQLite3.dll and moving it tomobile support device window. Nothing has worked. What can I do to get some music recorder? Should I buy a new cassette deck and record onto tape like I did 20 years ago? This is a very important disc I am making as a gift & I need to get it done by this weekend. Is there anyone that can offer good advice?love paying a lot of money for something that doesn't work right, thanks apple
-
Web pages are taking an extremely long time to load. Sometimes they don't load at all. This is especially true with video sites like YouTube. I scanned my entire computer with Ad-Aware, Malwarebytes, Iobit Malware Fighter, SuperAntiSpyware, Windows Defender, Malicious Software Remover Tool, and Emisoft Anti-Malware. I did an anti-virus scan with Avast. I also ran CCleaner and Advanced System Care to clean all junk. Nothing is working.
--------------------------------------------------------------------------------
Running about 7 tabs open at startup, this has always worked fine, here is the problem and the sequence of events leading up to hope. Any suggestions would be appreciated:
Background:
Mozilla updated me to 7.0 automatically a few days ago, no problems
Yesterday they auto updated me to 7.0.1, now it won't connect
Scaled back to 3 tabs at start now it connects but after a minute of so, the icon in the tabs just spinning and it isn't connected
Scaled back to one tab the same thing
Reinstalled Firefox, disabled the Norton firewall to test, same thing
Checked the application setting on the firewall, it is set to allow or auto
I downloaded Firefox 8 beta same issue
Any suggestions would be appreciated, not sure it is foxfire or not but the upgrade to 7.0.1 started
Anyway to go back to a pre 7 release?
I disabled the add on and have the same problem.
BTW IE 8 works fine.
Thanks -
i am trying to install itunes 10.5 but I get an error message that says "click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi..." I try to point iTunes to the .msi file on my c drive but then it gives me a message says "the file location is not a valid installation packaage for the product iTuness. Try to find the installation package 'itunes.msi' in a folder from which you can install iTunes". Any help, insight, guidance would be greatly appreciated!!
"The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I tried to download OS X Mavericks v 10.9.2 into my iMAC purchased on June 25, 2007 and upgraded to Snow Leopard 10.6.8 When I tried to download OS X Mavericks v 10.9.2 into my iMAC, the message came up that it cannot be installed in my computer. Why?
Because there is a flaw in the App Store that gives you an alert you can never ever get rid of telling you to download Mavericks, even though when you click it then tells you your machine is too (I have to say 'darn' here because Apple automatically astersiks out the first word I used that also begins with d and is four letters) old. So you have to live with that little "1 update available" alert, though in reality, you cannot install it. You can imagine that either it is a sinister plot to wear away at you to buy some new hardware, even though yours is working just fine, or that it is a programming error Apple just doesn't care enough about to correct.
-
Reading the datas in the Xml file and store it in the array using java
Hi every one
Can any one send me the java coding for traversing through XML file and get the data and store it in the array (SAX parser is prefered)
its a urgent requirement . please help me
Regards
Aruni send it to ur mail id ,
could you please send me a mail to [email protected] -
ANYBODY ANY SUGGESTIONS FOR MY ABOVE PROBLEM
Hi,
Are you trying to use the Help -> Updates method?
Both those patches need to be manually applied to PSE 9.
Brian -
iOS7 won't install. What do I do??
Do you have any geographical restrictions? I cannot get Netflix as it is not supported where I live so basically get the same problem as you. If you can get netflix on your computer then it is not an issue. This is what I get when I open the netflix web page.
Sorry, Netflix is not available in your country yet.
Enter your email & we'll let you know when Netflix is available.
Secure Server. We will not sell or rent your email address. See our Privacy Policy. -
I am using iWeb 3.03. I have prepared a new website and several pages. Attempts to publish have failed. An error message appears, which I don't understand. The message includes a note that says "try again later." What might I try next to get past this problem?
Duane FitzgeraldTry the following:
close iWeb.
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
go to your Home/Library/Caches/com.apple.iWeb folder and delete the contents.
reboot.
go to the System/MobileMe preference pane and log out of MMe.
login with a bogus username and password like "test" and "test". This clears the caches.
login with your correct username and password.
launch iWeb and try again.
OT -
My iphone will not allow me to use Mail. It keeps saying to enter my password. I do so and then it goes to verify account. Then it tells me that "Yahoo! Serve Unavailable. Please try again later." What else can be done?
MoniqueApparently, Yahoo is having a problem but there is a possible band aid listed here.
http://help.yahoo.com/communities/index?page=forums&topic=b79211f01143448182dd6a 5315e01266
It worked for us. -
Maximum file size that can be ulpoaded at one time
Hi All,
I have an issue in which user is uploading 200 MB file in to KM. But she is getting "IisProxy.dll: 502 Bad Gateway" error.
I have tried uploading a document and was successfull in uploading 93 MB document and while uploading above this (93MB) i was getting Page cannot be found error.
I have found in refrences of same as in SAP note 820028 and on
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/25/b0a4f6f2b03a43a727a165a4d6a555/frameset.htm
Please advice me what shoud be the maximum file size that can be uploaded at one time.
Thanks in advance.
HoneyHi,
By default the maximum file size is 128 MB. You can configure that in visual administrator.
http://help.sap.com/saphelp_nw04/helpdata/en/05/35e13d8ee48f5ee10000000a114084/frameset.htm
If you as administrator need to upload a file with larger size, you can use km file repository like etc. and can upload file from OS.
Regards
Baby -
What is the max file size that a Adapter Engine [J2SE] can handle ?
We are having a scenario where a 4 GB compressed file needs to be sent across without mapping, I'm trying to explore the possible options to tackle this scenario.
Some of the options, we are considering :
- Sending a file from one Adapter Engine [J2SE] to another Adapter Engine [J2SE] bypassing PI. Adapter Logs will be monitored. What is the maximum file size that can be then handled assuming a standard installation ?
- What is the max file size that Adapter Engine [J2SE] can send through PI without mapping?
Any help with the above options or with any other possible solutions to handle extremely large file transfers will be much appreciated.Hi,
j2se is not a good option here
if you have 4gb then you need a copy solution
a) build an proxy that will just copy the file from sender dest to receiver
b) build an adapter that will do the same as proxy)
this way processing of this message will be controlled with SAP PI/XI
it will be as quick as copy & paste of the 4gb file
I did the a) for one of the flow for 300 mb and it works perfectly
Regards,
Michal Krawczyk
Maybe you are looking for
-
Configuring Webservices in GP (CE) - GenericServiceFactory problem
Hi, The setup is like this. We have a seperate system running a NW 7.1 Demo environment with CE. I'm building a fairly large demo on this system, tring to implement all the new goodies SAP offers. The system connects to our backend ERP system, which
-
Hi all! Cud anyone guide me as to how to pass values to the event parameters created by me in a BUSINESS OBJECT. To be more precise: I have created an event with some parameters in it in a Z-Object. Now thru Select query, want to assign values to the
-
Changed %windir% variable into something else and now most of my administrator files won't open
I have an Alienware 14, Windows 7 . So I changed the variable %windir% into something else and now most of my administrator items won't open. A lot of my files won't open anymore. When I try to open some things, it would say "The system could not fin
-
I'm working with iPhoto. Photos are not showing up on the Events page for me to organize. I've gone to the Photos section and organize them into events. However, they do not appear on the Events page. What am I doing wrong?
-
Hello all, I have a question abou cue points. I have a script, see below. In that script I define some cue points. Now I want to define a action for each cue point seperate. The script: // Requires an FLVPlayback instance called my_FLVPlybk on Stage