Error while talking WCF using net.tcp
I am getting following error in Trace viewer while communicating WCF service from WPF application using NetTCP
The ' ' character, hexadecimal value 0x20, cannot be included in a name.
Parameter name: name
I am getting error on following even of WPF
===============================
void onStartClick(object sender, EventArgs e) {
productsServiceHost = new ServiceHost(typeof(ProductsServiceImpl));
Here is my app.config of WPF
====================
<?xml version="1.0"?>
<configuration>
<configSections>
<section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
requirePermission="true" />
</configSections>
<dataConfiguration defaultDatabase="AdventureWorksConnection" />
<connectionStrings>
<add name="AdventureWorksConnection" connectionString="Data Source=WIN764PRSP1\SQL2008;Initial Catalog=AdventureWorks2008;User ID=sa;Password=!@Sql2008@!"
providerName="System.Data.SqlClient" />
</connectionStrings>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
<system.serviceModel>
<services>
<service behaviorConfiguration="ProductsTcpBehavior" name="ProductsService.ProductsServiceImpl">
<endpoint address="net.tcp://localhost:8080/TcpProductsService"
binding="netTcpBinding" bindingConfiguration="" name="NetTcpBinding_IProductsService "
contract="ProductsService.IProductsService" />
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="ProductsTcpBehavior">
<serviceDebug includeExceptionDetailInFaults="True" />
<serviceMetadata />
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
</configuration>
Here is my app.config of Console Client Application
===================================
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="NetTcpBinding_IProductsService" closeTimeout="00:01:00"
openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard"
maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536"
messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered"
useDefaultWebProxy="true">
<readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
maxBytesPerRead="4096" maxNameTableCharCount="16384" />
<security mode="None">
<transport clientCredentialType="None" proxyCredentialType="None"
realm="" />
<message clientCredentialType="UserName" algorithmSuite="Default" />
</security>
</binding>
</basicHttpBinding>
</bindings>
<client>
<endpoint address="net.tcp://localhost:8080/TcpProductsService"
binding="netTcpBinding" bindingConfiguration="" contract="ProductsService.IProductsService"
name="NetTcpBinding_IProductsService" />
</client>
</system.serviceModel>
</configuration>
Here is Program.Cs file in Client
======================
static void Main(string[] args)
Console.WriteLine("Press ENTER when the service has started");
Console.ReadLine();
// Create a proxy object and connect to the service
//ProductsServiceClient proxy =
// new ProductsServiceClient("BasicHttpBinding_IProductsService");
ProductsServiceClient proxy = new
ProductsServiceClient("NetTcpBinding_IProductsService");
// Test the operations in the service
// Obtain a list of all products
Console.WriteLine("Test 1: List all products");
string[] productNumbers = proxy.ListProducts();
foreach (string productNumber in productNumbers)
Console.WriteLine("Number: " + productNumber);
Console.WriteLine();
Can anyone assist where i am wrong.
Hi IT Quest,
In your scenario, I see that you have hosted your WCF Service on the WPF application and it throws exception from WPF application, so in my mind, the WPF does not work well when hosting the WCF Service, please try to do a test by using the WcfTestClient(https://msdn.microsoft.com/en-us/library/bb552364(v=vs.110).aspx)
to see if your WCF Service works well.
The following article show us how to host a WCF service using WPF, please try to check it:
https://soumya.wordpress.com/2010/05/26/wcf-simplified-part-7-hosting-a-wcf-service-using-wpf/ .
Please also try to enable the WCF tracing to help find the root cause.
#How to enable WCF tracing:
https://msdn.microsoft.com/en-us/library/ms733025(v=vs.110).aspx .
Besides, if the problem still exist, it will better if you can try to post a simple reproduce project in here.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
Error while creating stock using tcode: MB1C
Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not existHi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu -
Error while migrating users using CSSImportExportUtility
Error while migrating users using CSSImportExportUtility
I'm tring to export all user and group information from a Hyperion Shared Services 9.2.1 by using CSSExport.bat
When there was only native directory in HSS, i can export these information successfully.
But when I enabled NTLM external user authentication following error occurred:
Exception in thread "main" java.lang.UnsatisfiedLinkError: getOSVersion
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.getOSVersion(Native Metho
d)
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.<clinit>(Unknown Source)
at com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(Unknown
Source)
at com.hyperion.css.CSSAPIExtnImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.exchange.NativeProviderManager.<init>(Unknown Source
at com.hyperion.css.exchange.ImportExportManager.cssExport(Unknown Sourc
e)
at com.hyperion.css.exchange.CommandUtility.run(Unknown Source)
at com.hyperion.css.exchange.CommandUtility.main(Unknown Source)
I searched reference documents on the web, found this article: (http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/mdm_111110_readme.html)
Troubleshooting Tip: If HSS is configured for an NTLM provider, DRM services may not start due to error: "Exception Emdm_Exception with message 'Could not Initialize CSS. Error: 'getOSVersion'."
You may receive the following error after clicking the "Enable CSS" button in DRM Console: “LoadLibrary("C:\Hyperion\Master Data Management\mdm_ntier_css_validator.dll") failed - The specified module could not be found.”
To resolve both of these conditions, update the Windows System Path on the Data Relationship Management server with the applicable JRE and CSS pathing below.
NOTE: Reboot the Data Relationship Management server machine after making any changes to the Windows Path.
NOTE: Ensure that only one JRE version and one CSS version are referenced in the Windows Path.
? For HSS 9.3.1:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.1\bin;
? For HSS 9.3.0:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.0\bin;
? For HSS 9.2.0.3:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0.3\bin;
? For HSS 9.2.0:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0\bin;
I found these is no directory "%HYPERION_HOME%\common\CSS\9.2.0\bin;" exists but "%HYPERION_HOME%\common\CSS\9.2.1\bin;"
I configured PATH by setting to above, and tried CSSExport again, still failed.
Than I disabled the NTLM is HSS, tried CSSExport again. It was successful.
So I am convinced that the problem caused by NTLM or PATH environment variable or some files associated.
Does anybody know the solution ?I recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
-- Sergiusz -
Error while Loading Budgets Using AMG
Error while Loading Budgets Using AMG
Dear All,
I am trying to load Budgets into ORACLE Projects using AMG API's..
I have developed PL/SQL which uses below procedures of pa_budget_pub package.
init_budget;
load_budget_line;
execute_draft_budget;
baseline_budget;
Procedure execute_create_draft_budget fails with following error message.
error message: Please enter a valid product code for this project.
error message: You entered an invalid API parameter.Please enter valid parameter and try again. Parameter Name: Resource List Parameter Value: 1446
error message: Project: AC044. Please specify a valid resource list.
error message: Project: AC044. Please specify a valid resource list.
Could somebody explain me how to resolve this error message and load the budget lines.
Thanks in Advance.
Afsal Basha.What I'm saying is, verify the column name. Dont post if not possible.
Example follows, with one table intentionally "hidden".
SQL> create table "tEsT" ("MaxNumber" float, "MaxnumbeR" number);
SQL> select table_name,column_name from user_tab_columns where table_name like 't%';
TABLE_NAME COLUMN_NAME
tEsT MaxNumber
tEsT MaxnumbeR
teST iD
teST MaxNumberHth,
Fredrik -
Error while insert data using execute immediate in dynamic table in oracle
Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically. -
Getting error while creating subsite using custom template in sharepoint2013
Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
INVALID_QUEUE_NAME : Error while scheduling message using qRFC
Hello SDNers
We are currently performing our PI 7.1 upgrade and one of our scenario uses a Sender SOAP of the type EOIO. We tried executing this scenario in PI 7.1 XID environment and in it worked fine without any errors but in our PI 7.1 QA environment it is giving the following errors
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Message Split According to Receiver List
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SCHEDULE_ERROR</SAP:Code>
<SAP:P1>XBQOC___*</SAP:P1>
<SAP:P2>INVALID_QUEUE_NAME</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while scheduling message using qRFC (queue name = XBQOC___*, exception = INVALID_QUEUE_NAME)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can you please exaplian what could be the issue we are facing.
Thanks.
Kiran
Edited by: Kiran Sakhardande on Oct 22, 2008 4:08 PMHI Kiran,
Have gone throgh the following link?
INVALID_QUEUE_NAME
Regards
Sridhar Goli -
Getting error while publishing workflow using SP designer for SharePoint 2013
Hi,
I am try to setup Workflow manager for our sharepoint applications.
WF manager set ran without any issue.
I registered the SPWorkflow service which succeeded as well. The Workflow service application shows "Workflow is connected"
I am creating a workflow using sharepoint designer using my credential (not Service account). I am able to save it but while publishing, its prompting with an error.
The error says "Errors were found while compiling the workflow.The workflow files were saved but cannot run." Clicking advanced button show
"Microsoft.SharePoint.SPException: We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
at Microsoft.SharePoint.SPScaleOutDatabaseMap.CreateSqlSession(ISPScaleOutDatabaseMapProvider mapProvider, Byte[] compositeKey, Guid forceRefreshVersion, Guid& version)
at Microsoft.SharePoint.SPScaleOutDatabaseCommandExecutor.Execute(ExecuteDelegate operation, ISPScaleOutDatabaseMapProvider mapProvide"
Any help would be highly appreciated
Thanks,Hi,
According to your post, my understanding is that you got error while publishing workflow using SharePoint designer for SharePoint 2013.
Please check whether the Central Admin > Manage Service Application-> “App Management Service” is started.
Please check whether the “Configure service application associations”, ”App Management Service” is already associated.
Then please check whether the “Manage Services on server” and the “App Management Service” is started.
In addition, please try to re-register Workflow Service.
If the issues still exists, please follow the steps in the
Steps to Verify that Server Is Correctly Set Up. After you verified that the server is correctly set up, follow the steps in the
Steps to Troubleshoot Workflow Management Service and
Troubleshooting the Service Bus for Windows Server then retry your action related to publishing workflows
More information:
http://wp.ahcheng.com/2013/03/23/error-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Error while trying to use '{' in the query
Hi,
The below mentioned query is giving Error while trying to use '{'
Query:
select s,x from table(SEM_MATCH(
'{?s rdf:type <http://www.cs.com/sbip/dwh/mdm/data_modeling#Base_Term> .
?s ?p ?x}',
SEM_Models('foundation'),
SEM_RuleBases('OWLPRIME'),
SEM_ALIASES(SEM_ALIAS('dm','http://www.cs.com/sbip/dwh/mdm/data_modeling#'),
SEM_ALIAS('owl','http://www.w3.org/2002/07/owl#')), null, 'INVALID'))
where regexp_like(x,'Customers','i');
Error details:
ORA-29532: Java call terminated by uncaught Java exception: oracle.spatial.rdf.server.TokenMgrError: Lexical error at line 1, column 1. Encountered: "{" (123), after : ""
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 178
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 67
ORA-06512: at line 4
I am unable to use Option, Filter in query.
Any solution?
Please let me know do i need to apply any patch?
Note: I am using Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Regards,
Kavitha.Hi,
For OPTIONAL support in 11.1.0.7.0, you need the following patch
Patch 7600122: CURLY BRACE SYNTAX,VIRTUAL MODELS, NETWORK INDEXES AND HINTO FRAMEWORK SUPPORT
Support for SPARQL FILTERs in SEM_MATCH is not available for 11.1.0.7.0. You will need version 11.2.0.1.0 or later for FILTER support. With 11.2.0.1.0, we recommend that you apply our latest patch set:
Patch 9819833: SEMANTIC TECHNOLOGIES 11G R2 FIX BUNDLE 2
All of the above patches are available through My Oracle Support.
Thanks,
Matt -
"Submission status" error while posting comments using evcom
Hi friends,
I am getting "Submission status" error while posting comments using evcom. This error comes up even when we use "post comments" option in Action Pane.
The error text goes like this :
Error Message -
This cell can not be updated. Submission status must be modified to allow changes.
010_000|2009.TOTAL|INTERCO|NOPC
How can we get rid of this error?That's means the status for that specific category, time entity is approved and you can not do any changes including
comments chnages.
You have to change first the work status for that entity and after that you will be able to submit your comments.
Regards
Sorin radulescu -
Unknown error while updating module use!
I restarted XE with "/etc/init.d/oracle-xe stop /etc/init.d/oracle-xe start" and then see this error message in the terminal console. Every serveral minutes, the error "Unknown error while updating module use!" is echoed.
Any advice?Look for the alert_xe.log file, maybe you'll find some additional information there if that message is related to your XE instance.
C. -
IPHONE 4s heating while talking and using 3G
My IPHONE 4S (8GB) heating alot while talking and using 3G or WiFi network. Please suggest any solution...
Hello Rohit Shinde,
I understand that your iPhone is getting warm when you use it. It is normal for the device to get warm when in use or charging.
iOS devices: Keeping device within acceptable operating temperatures
http://support.apple.com/kb/ht2101
When using the device or charging the battery, it is normal for it to get warm. The exterior of the device functions as a cooling surface that transfers heat from inside the device to the cooler air outside.
Thanks for reaching out,
-Joe -
Error while adding a used relationship between the New DC and the Web DC
Hi Gurus
We are getting the Error in NWDS while Adding a used relationship between the New DC and the Web DC.
Steps what we are Done
1. Create the custom project from inactiveDC's
2.creating the project for the component crm/b2b in SHRAPP_1
3.After that we changed the application.xml and given the contect path.
4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
so, we skip this step and tried to create the build then it is saying that build is failed..
Please help us in this regard.
Awaiting for ur quick response...
Regards
SatishHi
Please Ignore my above message.
Thanks for ur Response.
After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the projects was also sucessfully done and EAR file was created.
We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
When i right click on my activity Id the deployment summery is also disabled.
So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
Any pointers in this regard would be of great help..
Awaiting for ur valuble Responses..
Regards
Satish -
Error While Posting documents using F-28
Dear Friends,
While posting Documents using 'F-28' after I passed posting key and account number I m getting the Error
'Entry not Possible'. Can anyone tell what may be the problem how to clear this error.
Regards
Balamurugan N
Moderator message: duplicate post locked, follow up on your previous one instead of opening a new thread for the identical problem.
Edited by: Thomas Zloch on Apr 26, 2011 8:34 PMHi,
I Guess this error is occuring because of the posting key and account number (Account type) combination is not correct. For each account type a perticular posting is is defined for debit and credit entries.
Check with your functional the correct posting key for account type and account number you are using. -
Error while generating JAR using adadmin
Hi all,
EBS Version: R12.1.1
I am in the middle of migrating the EBS from windows 2003-32bit to Linux 5-64Bit.
I am getting the below error while generating the JAR files using adadmin.
Error generated in adadmin
Signing product JAR files in JAVA_TOP -
/u01/appltest/TEST/apps/apps_st/comn/java/classes
using entity TEST_vm1213l and certificate 1.
Successfully created javaVersionFile.
Generating product JAR files in JAVA_TOP -
/u01/appltest/TEST/apps/apps_st/comn/java/classes with command:
adjava -mx512m -nojit oracle.apps.ad.jri.adjmx @/u01/appltest/TEST/apps/apps_st/appl/admin/TEST/out/genjars.cmd
Failed to generate product JAR files in JAVA_TOP -
/u01/appltest/TEST/apps/apps_st/comn/java/classes.
adogjf() Unable to generate jar files under JAVA_TOP
Backing up restart files, if any......Done.
You should check the file
/u01/appltest/TEST/apps/apps_st/appl/admin/TEST/log/gen_jar.log
for errors.
Entries from gen_jar.log
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/appltest/TEST/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/appltest/TEST/apps/apps_st/comn/java/lib/appsborg.zip:/u01/appltest/TEST/apps/tech_st/10.1.2/forms/java:/u01/appltest/TEST/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/appltest/TEST/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/appltest/TEST/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/appltest/TEST/apps/apps_st/comn/java/classes"
Calling /u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
The JDK version is 1.6.0_10
Validating the files/directories specified for -areas option
ERROR: File/directory 61A9A14779A1A8 does not exist
ERROR: File/directory -keyPass does not exist
ERROR: File/directory AA65D2F9B26DDBABEF33 does not exist
ERROR: File/directory -storePass does not exist
ERROR: File/directory -keysEncrypted does not exist
Validating the files/directories specified for -outputSpec option
Validating the directory specified for -lstDir option
Error(s) have occurred; exiting with status 1
Failed to generate product JAR files in JAVA_TOP -
/u01/appltest/TEST/apps/apps_st/comn/java/classes.
Kindly provide some inputs to troubleshoot further.
If you need further details, kindly let me know.
Regards,
Krish.Hi all,
I have applied the consolidated JRI fixes - patch 17191279 .
Then, when generating Jar, received keypass is tampered error.
re-generated the key using $ adjkey -initialize.
Now, its working fine.
Regards,
Krish.
Maybe you are looking for
-
Hi Everyone, A Very Very Happy, Fun-filled, Awesome New Year to You All. Now coming to the discussion of my problem in Oracle Forms 6i: I have created a form in which the data is entered & saved in the database. CREATE TABLE MATURED_FD_DTL ACCT_FD_
-
FPN: No ESID found error while invoking BEx iviews for Reports.
Hi Everybody, We have a federated portal network [FPN] setup. We are EP 7 SP15 for both Consumer portal and BI producer portal. The content is delivered to users via RRA Remote Role Assignment ] in consumer portal for BI portal roles from Producer bi
-
JTable and loading 350 Mb file
Hi guys, can you help me, What is the best way to load and to handle such a big amount of data? I want to visualize them in a Table, let say JTable. Can someone give me a link with a control or piece of code that handles the data in parts?
-
Mac Pro (Late 2013) - 64GB RAM Upgrade
Anyone have any recomendations on third party brand for a 64GB RAM upgrade. Apple RAM costs approx £1000 GBP whereas Crucial is approx £645 GBP, OWC is similar to crucial if I import from the US but I'm not sure if their ram are Registered or unbuffe
-
JTabbedPane, and JPanel.
Hi im going thrue swing tutorials here on sun. And wonder a bit about hierarchy. I use JTabbedPane and every class have there own JPanel that i add to the extended JPanel. I show below with example. In Main class public JFrame mstFrame() {