Error while testing connection WAS in Enterprise Portal

Hi All,
While performing the connection tests in SAP enterprise portal
I have used user logon method UIDPW
ITS connection and Connection Test for Connectors are getting successful but SAP Web AS Connection is showing -:
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: WAS Protocol (http) WAS Host Name (sapserver1)
*5. HTTP/S connection failed *
Settings for WAS
WAS Description: IP address of the system
WAS Host Name: sapserver1
WAS Host Name: Pls tell me the correct path
WAS Protocol: http
Waiting for your quick responses.
Thanks & Regards,
Prashant.

Hi Juan,
As far i know he is trying to test the was connection from his portal
While performing the connection tests in SAP enterprise portal
WAS Description: IP address of the system
WAS Host Name: sapserver1
WAS Host Name: Pls tell me the correct path
WAS Protocol: http
As far as my understanding,this he would be looking for this,
any ways this is my perception.
Regards,
Vamshi.

Similar Messages

Error while Test Connection with Connector

hi all:
     there is an error while Test Connection with Connector , I also test it through sys administration->sys configuration->
suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
***************ERROR 1 while *error while Test Connection with Connector ******************************************************
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this
system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
************error sys administration->sys configuration-> suport -> sap transaction        ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
.runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
9##0#0#Error##Java###04:4524/05/10_0077_6087550
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
&\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
Please check the protocol and host entries for system &\#39;sapdev&\#39;.
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
(AbstractIntegratorComponent.java:123)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Hi,
As per this part of the trace:
Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
(WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system object
with the hostname of the ITS server.
Generally the template is
<System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
So that's why you got
Please check the protocol and host entries for system ..

Error while publishing the query in enterprise portal

Hi EP experts,
One of the user is executing the query in enterprise portal. The user is assigned to proper roles in ABAP BI system.
But when clicking on the query the user gets the below error
Full Message Text
A message was generated:
ERROR
DP_1: Unable to load query Z_F2P_DP_ZDPM_Q0002
com.sap.ip.bi.webapplications.dataproviders.selector.impl.Localization loaderr_query
DP_1
Z_F2P_DP_ZDPM_Q0002
DP_1: Unable to load query Z_F2P_DP_ZDPM_Q0002
com.sap.ip.bi.webapplications.dataproviders.selector.impl.Localization loaderr_query
DP_1
Z_F2P_DP_ZDPM_Q0002 "
The user has S_RFC authorization in a general role but still facing the issue .
Please suggest
Thanks
Rosandeep Acharya

Have you created BI iView?
If so you need to give the TEMPLATE=<template id>
and preview the iview from portal.
Hope this helps.
Cheers-
Pramod

Error while testing connection

Hi
i am trying to configure an RFC destination, I am getting the error msg
""Program id" not registered. CPI-C error CM_ALLOCATE_FAILURE_RETRY"
while testing the connection.
How to register a program.
Thanks

Any suggestion pl

Error while testing ITS Connection

Hi all:
There is an error while testing ITS Connection, it says the 8000 port is a closed point by the firewall , but according to the
administrator of intranet, there is no firewall between ECC and Portal, I guess I should add port 8000 into service file ? I mean the file of Host and Service, am I right ?
An HTTP/S connection to http://10.180.80.171:8000 was not obtained successfully; this might be due to a closed port on the Firewall.

thank you very much for your help. for update server's full name, may I put the mapping values into host file in the format of <ip address> <hostname.domain name> <hostname>, do you think it is OK?
in the second blog you suggest there is something about Server port(please refer to the following):
in the window machine, there should be an entry like sapms<SAP System ID> , can you please give me a full example:
let's say my system ID is EC1, so it would be sapmsEC1 8000/tcp, right ?
Here you have to enter the port of your application server. By default this is 80<SAP System ID>. But your basis administrator can modify this setting, thatu2019s why you should check it in the transaction SMICM (Goto -> Parameters -> Display). For example the IBSolution Development System Erinome the port is 8000.
You can also have a look into your services file on your machine. If you have a windows machine then the file exists e.g. here C:\WINDOWS\system32\drivers\etc\services
In this file you should search a entry like sapms<SAP System ID>.
Edited by: jingying Sony on May 24, 2010 4:41 PM

I have error while testing the system created from a sap business objects template in SAP portal

I have error while testing the system created from a sap business objects template in SAP portal. Error text:
com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
I configure integration SAP portal and SAP BW system. All system requirements are complied.
Environment
SAP Business Objects 4.0
SAP BW 7.31
1.     I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
2.     Next I setting integration SAP PORTAL with SAP BW system
3.     I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
4.     In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
5. Select Export entry button and binary format file certificate for download. Press download.
6.     Save certificate file in local PC folder
In next step need export certificate file to SAP system. Sequence of step:
1.       Run STRUSTSS02 transaction .
2.       Chose certificate ->import.
3.       Select downloaded certificate file
4.       Select Add to certificate list button and Add to ACL button
5.       Inter System ID and Client(000)
6.       In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
7.       Result – downloaded iview.
8.       In next step I create system from template. System administration->system landscape.
9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
10.   When I created the system and test the connection error occurred: See screen_3
This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.

Did you find a solution?

Error while testing the endpoints in Service Registry

Hi,
I am getting the following error while testing the endpoint in the Service Registry
Invalid Response Code: (404) Not Found. The request URL was:"http://<server>:8000/sap/bc/srt/wsdl/bndg_DD73518A3AD471F18558001D0910D3CA/wsdl11/binding/ws_policy/document?sap-client=800". Check, whether the URL is correct, and the Web Service that you are requesting is up and running.
I have created an Enterprise Service at the backend and have published to the Service Registry of the CE server , but while testing the endpoint in service registry i am getting error.
Can any one please help me to solve this issue.
Thanks & Regards,
Hamsa Shree

Hi hamsa,
Have you tested the service? If It works, maybe there's something wrong with your destination configuration.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/705459a3-bf1c-2b10-8a9d-d300ada5f0fc
You may find a solution in the above article.
Good luck!
Wenhao

Error while testing demo app:Internet Explorer cannot display the webpage

HI Gurus,
I am new to the webdynpro development. I was starting with building demo application. However, finding below error while testing it using se80 transaction. Please suggest if any configuration is missing or anything else.
I am using ECC6 : 720 Final Release....
Error is below :
This problem can be caused by a variety of issues, including:
u2022Internet connectivity has been lost.
u2022The website is temporarily unavailable.
u2022The Domain Name Server (DNS) is not reachable.
u2022The Domain Name Server (DNS) does not have a listing for the website's domain.
u2022There might be a typing error in the address.
u2022If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section.

Thanks sanasrinivas,
I did the steps as mentioned by you. I also checked the link http://wiki.sdn.sap.com/wiki/display/EP/12ITSWebGUI-Activation(BackEnd) to activate the its webgui. Now the new error is coming as mentioned below.
Note: After running webdynpro application a login screen apears and after giving uid and pwd following error appears. however, while testing the service in sicf, logon happens successfull.
The URL ).
Please let me know if anything is missing or the further steps i can take.
Thanks,
Janisar
Edited by: janisar.munshi on Feb 15, 2012 3:33 PM
Edited by: janisar.munshi on Feb 15, 2012 3:36 PM

Receiving the internal 500 error while testing java web service

HI,
Problem Summary:
Receiving the internal 500 error while testing java web service in integrated weblogic server.
my scenario is like,
retrieve the Payload from Dehydration tables.
We are connected to SOA_INFRA schema and we are retrieving the payload from the dehyadration tables based on InstanceId and ECID using Java Classes.After that i make it as a web service and i deployed in to intergrated weblogic Server.It is generating the Target End Point URI.When am i hitting this it is showing structure of the service.I am testing this service from soapUi it is returning the Server internal error with 500.Here i am passing inputs as InstanceId and ECID.
I had verified in my Jdeveloper,Proxy settings are available.
Error Payload:
I am receiving the Internal 500 error because of JDeveloper HTTP Analyzer encountered an error retrieving: CONNECT https://192.168.0.41:9102 HTTP/1.0.
An exception occurred while retrieving the response for https://192.168.0.41:9102.
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.checkEOF(SSLSocketImpl.java:1293)
     at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:65)
     at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:50)
     at oracle.jdevimpl.webservices.tcpmonitor.model.HttpMessageBase.readLine(HttpMessageBase.java:658)
     at oracle.jdevimpl.webservices.tcpmonitor.model.HttpRequest.read(HttpRequest.java:327)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.getResponse(ConnectionHandler.java:405)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.run(ConnectionHandler.java:331)
Caused by: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.net.ssl.internal.ssl.InputRecord.handleUnknownRecord(InputRecord.java:523)
     at com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:355)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:798)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1165)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.getSession(SSLSocketImpl.java:1916)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.negotiateSSL(ConnectionHandler.java:707)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.negotiateForwardedSSLConnection(ConnectionHandler.java:672)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.run(ConnectionHandler.java:311

An exception occurred while retrieving the response for https://192.168.0.41:9102.
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?This error says that port 9102 is a plain HTTP port so either use the correct port (which is listening for HTTPS connections) or use HTTP instead of HTTPS in the URL.
Regards,
Anuj

Error while testing the webservice through SOAMANAGER

Hi All,
I have created a webservice from a Function module ( RFC enabled). I am getting an error while testing the webservice from the SOAMANAGER but the function module is working fine giving proper output.
The error is
REQUEST:
POST /sap/bc/srt/rfc/sap/zws_test_cms_bp_fac/600/zws_test_cms_bp_fac/zws_test_cms_bp_fac HTTP/1.1
Host: ed1app.corp.fcc.ca:49000
Content-Type: text/xml; charset=UTF-8
Connection: close
Authorization: <value is hidden>
Content-Length: 654
SOAPAction: ""
<?xml version="1.0" encoding="UTF-8" ?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Header><sapsess:Session xmlns:sapsess="http://www.sap.com/webas/630/soap/features/session/"><enableSession>true</enableSession></sapsess:Session></SOAP-ENV:Header><SOAP-ENV:Body><ns1:ZSRAV_TEST_CMS_BP_FAC xmlns:ns1='urn:sap-com:document:sap:rfc:functions'><IT_BP_LIST><item><BP_NUMBER>9999990013</BP_NUMBER></item></IT_BP_LIST><IV_COMPANY_CODE>FCC</IV_COMPANY_CODE></ns1:ZSRAV_TEST_CMS_BP_FAC></SOAP-ENV:Body></SOAP-ENV:Envelope>
RESPONSE:
HTTP/1.1 500 CX_ST_REF_ACCESS:XSLT exception.An error occurred during serialization in the simple transformation program /1BCDWB/WSSE2B50F3FDFC9C2A94B7.Access to the table ref. node 'ZSCMS_FAC_CAG_DETAILS' outside a loop
Set-Cookie: <value is hidden>
content-type: text/xml; charset=utf-8
content-length: 0
accept: text/xml
sap-srt_id: 20100202/041112/v1.00_final_6.40/4B67E41A4BC41B7CE10000000A013104
server: SAP Web Application Server (1.0;700)
please do the needful.
Thanks in advance

Hi,
Here is a very smart tool for webservice test:
[soapUI|http://www.soapui.org/]
It works fine for me!
bg,
attila

Error while saving Ad-hoc report in Portal

Hi Experts,
I am getting flowing error while saving Ad-hoc report in Portal
Transport system is active - could not save/change queries
Please let me know how to resolve this issue.
Thanks in Advance
Regards,
Ravi

Hi Ravi,
Try this ->
Go To RSA1---> Transport connection view
In the menu Edit -
>Transport----->Switch-off Standard.
Now open and try to save your report.
Hope this helps!
Regards,
Saurabh

Error while testing FP_TEST_00

Hi,
I configured ADS in my machine where ABAP and JAVA stacks are running on same WAS.
I did so many times but i never faced this error while testing FP_TEST_00 program.
i'am getting this errror
"ADS:com.adobe.processingexception:problem accessing d(200101)
Message No.FPRUNX001"
I checked with the sap notes and some blogs on FPRUNX001 error and i followed those documents where i couldnt find any problem in configuration.
i think problem is with adsuser id but all the necessary security roles and groups are assigned to ADSUser as per the document.
Please guide me with a solution.
With Regards,
Pradeep.B

You are saying abt the HTTP destination which we need to create in Visual Admin right.
Yes i created that FP_ICF_DATA_SID and the url maintained is http://hostname(Abap):portnumber (http port of ABAP),user ADS_AGENT and its password are maintained and when i click on save and test it is giving me the succesfull message.
Infact i tested by extending the url http://hostname:portnumber/sap/bc/fp/fp_test_00.xdp
it is showing me the success message.
yes it NW 7.0
With reagdrs,
Pradeep

Error while testing Data Service

Hi Experts,
               I got error while testing the Data service of <b>Salesorder Createfromdat2</b>, in this when iam entering the Doc_Type as ZORD it is showing " This Doc type is not defined, what to do with this. Where as when i tried with WebDynPro its not showing any error with that perticular field.
Plz help me out wether to change some configurations....
Thanks @ points,
Kishore
Message was edited by:
        kishore kumar

HI kishore
   This is the problem with ur RFC/data inside table. in webdynpro we r using adaptive RFC model, if RFC is giving output while executing, webdynpro will also do the same. but in VC it will parse each field according to the meta data definition, If it is not matching it will give error.
Regards
Pradeep P N

Fatal error while filling connection pool

I was not getting a connection to an Oracle database and I was getting the following error in cms.log: "FATAL Connector - Unable to create connection pool for T_Orbis_Oracle: Fatal error while filling connection pool for jdbc:oracle:thin:@MESDB:1521:ASPENB21" where T_Orbis_Oracle is the xMII link name and the database ASPENB21 is on server MESDB. I changed the database username in the link to SYSTEM and I then got a connection and a Created Connection pool message in the log. I then changed back to the username which originally was giving the error and it now also gave me a successful connection. I am now worried that there is an issue in the background which is gradually building up and will begin to fail again as previously. Can anyone explain what is causing this problem and suggest how I can correct it? Thanks, John.

John,
Check you have installed the JDBC driver ojdbc14.jar (works for both 9 and 10).
Also check the server package:
MII 11.x--->ServerPackage com.lighthammer.Illuminator.connectors.IDBC
MII 12.x--->com.sap.xmii.Illuminator.connectors.IDBC
Carefull when you set up the string because some oracle databases have servicenames instead of SID, and the url was different if you use them instead of the SID.
For services names the url is jdbc:oracle:thin@host:port:SID
Also check your Network firewall between MII and DB and ports too.
Oracle9i installs with a number of default accounts.You must unlock all other accounts before using them. Oracle recommends changing all user passwords immediately after installation.
-Suresh
Edited by: Suresh Hiremath on Jul 29, 2009 8:20 AM

OLAP Error:The underlying connection was closed: An unexpected error occure

We have recently installed BPC 51 (SP2). This been working fine for months until yesterday. Now we are getting errors on OLAP Database. Following is the problem description. Any help would be appreciated.
Received error "The underlying connection was closed: An unexpected error occurred on a send." while processing dimension. This message appears during 'Create Dimension' sub step( step 2/5). After this BPC server crashes.
The same error appears while deleting appset during 'Delete OLAP Database' sub step (step 2/4). We are also not able to restore an appset since the process hangs during OLAP Database stage.
Software version: BPC Version 5.0.102 SP2
MS SQL Server 2005
Microsoft SQL Server Management Studio      9.00.3042.00
Microsoft Analysis Services Client Tools      2005.090.3042.00
Microsoft Data Access Components (MDAC)      2000.086.3959.00 (srv03_sp2_rtm.070216-1710)
Microsoft MSXML      2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer      6.0.3790.3959
Microsoft .NET Framework      2.0.50727.1433
Operating System      5.2.3790
Thanks

Yes we did that several time, but did not solve the problem.
Finally, we processed all the dimensions, applications, appsets within SQL server studio and the problem is resolved. I am not sure if this would surface again.
Thanks
Edited by: Sankaranarayanan Janakiraman on Jun 19, 2008 8:34 AM

Error while testing connection WAS in Enterprise Portal

Similar Messages

Maybe you are looking for