Error while testing ECC and Portal-Connect to SAP gateway failed
Dear Experts,
While testing ABAP connection in Portal i am getting below error.
Dear All,
My error is rectified with below thread.
SLDCHECK: Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMIT'...
Hi,
You need to create an RFC to the SLDCHECK:
1. In your web browser, enter the URL of SAP NetWeaver Administrator using the following pattern:
http://<host>:<port>/nwa
2. Choose Configuration Management u2192 Infrastructure u2192 Jco RFC Provider.
3. Choose Create.
4. Enter the connection and transport parameters as required.
Field
Description
Program ID
We recommend that you use the following pattern: SLDAPI_<SAPSID>, where SAPSID is the system identifier of the AS Java system.
Gateway host
Gateway service
If your AS Java is an add-on installation to an ABAP system, use the gateway of the ABAP system. You can look up the gateway parameters of an ABAP system using transaction SMGW.
If your AS Java is a standalone installation, we recommend using a gateway on the Central Services Instance host. As of SAP NetWeaver 7.1, usage type AS Java that comprises SLD also contains an SAP RFC Gateway.
Server Count (1..20)
Enter 3.
5. Choose Next.
6. Enter logon data to the ABAP repository. You can either use an existing RFC destination from SAP NetWeaver Administrator u2192 Configuration Management u2192 Security u2192 Destinations or you specify the ABAP repository explicitly. The destination should point preferably to an AS ABAP close to SLD. If SLD is running on an AS Java standalone installation, the calling AS ABAP can be used instead. We recommend to create and use an RFC destination instead of explicitly specifying the connect parameters here. In both cases, the following parameters are required
Field
Description
System Landscape Directory 15
User Manual 03.04.2008
Application Server Host
System Number
Client
Language
User
Password
Enter the logon data for the AS ABAP system. You must specify an existing user with appropriate authorizations for RFC.
If you are running a system with both usage types AS ABAP and AS Java, use the logon data for this system.
If your AS Java is a standalone installation, use the logon data for the calling ABAP system.
7. Choose Next.
8. Leave the default values in the next steps.
9. Create the Jco RFC destination by choosing Finish.
Result
The Jco RFC destination creates a number of u201CServer Countu201D RFC server threads on your AS Java. These RFC servers register at the RFC Gateway specified. You may configure multiple ABAP systems to connect to these RFC servers. In this case, the Server Count should be increased when TIME_OUT exceptions are observed.
Creating an RFC Destination for the SLD ABAP API on the AS ABAP Side
Use
If you want to configure an ABAP application to access data in the SLD through the SLD ABAP API, you have to create an RFC destination on the ABAP system side.
Prerequisites
An RFC destination for the SLD ABAP API is created on the AS Java side.
Procedure
1. Call transaction SM59.
2. Select TCP/IP connections and choose Create.
3. In the RFC Destination field, enter SAPSLDAPI.
4. On the Technical Settings tab page, select the Registered Server Program indicator.
5. In the Program ID field, enter the same program ID as the one you entered when you created an RFC destination for the SLD ABAP API on the AS Java side. We recommend that you use the following pattern: SLDAPI_<SAPSID>, where SAPSID is the system identifier of the AS Java system.
6. Choose MDMP & Unicode and select the Unicode indicator.
7. Choose Save.
8. Test the RFC destination by choosing Connection Test.
If the display shows the response times, you have configured the RFC destination correctly.
Similar Messages
-
I have error while testing the system created from a sap business objects template in SAP portal
I have error while testing the system created from a sap business objects template in SAP portal. Error text:
com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
I configure integration SAP portal and SAP BW system. All system requirements are complied.
Environment
SAP Business Objects 4.0
SAP BW 7.31
1. I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
2. Next I setting integration SAP PORTAL with SAP BW system
3. I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
4. In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
5. Select Export entry button and binary format file certificate for download. Press download.
6. Save certificate file in local PC folder
In next step need export certificate file to SAP system. Sequence of step:
1. Run STRUSTSS02 transaction .
2. Chose certificate ->import.
3. Select downloaded certificate file
4. Select Add to certificate list button and Add to ACL button
5. Inter System ID and Client(000)
6. In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
7. Result – downloaded iview.
8. In next step I create system from template. System administration->system landscape.
9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
10. When I created the system and test the connection error occurred: See screen_3
This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.Did you find a solution?
-
Sol Man 4.0 Installation Error ECJS-30196 Connect to SAP gateway failed
Hi Experts
I am trying to install Solution Manager 4.0.
While installing SolMan, everything goes fine, until step # 31 create java users (creating SAP Jsf user), then it runs into below error messages.
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1LOCATION CPIC (TCP/IP) on local host with UnicodeERROR partner 'solman:sapgw23' not reachedTIME Mon Aug 13 17:44:59 2007RELEASE 700COMPONENT NI (network interface)VERSION 38RC -10MODULE nixxi.cppLINE 2770DETAIL NiPConnect2SYSTEM CALL connectERRNO 10061ERRNO TEXT WSAECONNREFUSED: Connection refusedCOUNTER 1
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR timeout occured
TIME Mon Aug 13 17:17:35 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -5
MODULE gwxx.c
LINE 480
DETAIL timeout 60000 msecs
SYSTEM CALL NiRead
COUNTER 1
Any suggestions/ideas for this error
Regards
RahulHi Experts
I am trying to install Solution Manager 4.0.
While installing SolMan, everything goes fine, until step # 31 create java users (creating SAP Jsf user), then it runs into below error messages.
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1LOCATION CPIC (TCP/IP) on local host with UnicodeERROR partner 'solman:sapgw23' not reachedTIME Mon Aug 13 17:44:59 2007RELEASE 700COMPONENT NI (network interface)VERSION 38RC -10MODULE nixxi.cppLINE 2770DETAIL NiPConnect2SYSTEM CALL connectERRNO 10061ERRNO TEXT WSAECONNREFUSED: Connection refusedCOUNTER 1
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR timeout occured
TIME Mon Aug 13 17:17:35 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -5
MODULE gwxx.c
LINE 480
DETAIL timeout 60000 msecs
SYSTEM CALL NiRead
COUNTER 1
Any suggestions/ideas for this error
Regards
Rahul -
Connect to SAP gateway failed - internal error
Hi, I've developed a simple .NET application that connects to a SAP system and makes a function call using a SAP Connector Proxy object. Everything works fine in my workstation, but deployment doesn't. I'm also deploying the following libraries: SAP.Connector.dll, SAP.Connector.Rfc.dll and librfc32.dll.
The fact is that deployment works fine in some servers, but not in others. I've checked that .NET Framework is installed (both versions, 1.1 and 2.0). I've checked the "WINDOWS\system32\drivers\etc\services" file. What else should I check? Any idea? Every suggestion would be appreciated.
The error message is the following:
Connect to SAP gateway failed Connect_PM GWHOST=xxx.xxx.xxx.xxx, GWSERV=sapgw00, ASHOST=xxx.xxx.xxx.xxx, SYSNR=00 LOCATION CPIC (TCP/IP) on local host ERROR internal error TIME Mon Nov 13 16:23:08 2006 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -1 COUNTER 1
And the connection string:
CLIENT=100 USER=****** PASSWD=****** LANG=EN ASHOST=xxx.xxx.xxx.xxx SYSNR=0
Thanks in advanceHi Daniel,
Can you connect to the particular system by using SAPGUI ?
if yes, then your librfc32 file is working fine.
NCo internally consumes it's functions.
Other points to check are
1> service name as appears from within the r/3 system [transaction : smgw]
2> NCo 2.0 uses .net 1.1 & nCo 2.5 uses .net 2.0, do you have both versions running parallely ?
3> gateway errors are infrastructure issues, please verify your firewall settings for the relevant protocols : http / https & also sap ports 3300 onwards.
the services file you have checked will list the ports that need to be opened on the firewall [in the case of multi - domain applications]
4> check in your 'hosts' file [same directory as your 'services' file]
This file contains the mappings of IP addresses to host names. Each
entry should be kept on an individual line. The IP address should
be placed in the first column followed by the corresponding host name.
The IP address and the host name should be separated by at least one
space.
Additionally, comments (such as these) may be inserted on individual
lines or following the machine name denoted by a '#' symbol.
For example:
102.54.94.97 rhino.acme.com # source server
38.25.63.10 x.acme.com # x client host
with respect,
amit -
CJS-30196 Connect to SAP gateway failed: Error during installation
Dear Experts,
Please Help me with the following error i am getting during installation of ECC6 with MAXDB,
ERROR 2009-08-04 08:28:43
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=node1 SYSNR=03 GWHOST=node1 GWSERV=sapgw03 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'node1:sapgw03' not reached
TIME Tue Aug 04 08:28:43 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
ERROR 2009-08-04 08:28:43
FCO-00011 The step createADSUser with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_ADS|ind|ind|ind|ind|2|0|createADSUser was executed with status ERROR .
Regards,
Ritesh BhatiaHi Guys,
I am installing Ecc6 on my laptop. While installing i have got a below error...
ERROR 2012-01-24 06:58:02
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A
ASHOST=ecc6 SYSNR=04 GWHOST=ecc6 GWSERV=sapgw04 PCS=1LOCATION
CPIC (TCP/IP) on local host with UnicodeERROR partner
'ecc6:sapgw04' not reachedTIME Tue Jan 24 06:58:02
2012RELEASE 700COMPONENT NI (network interface)VERSION
38RC -10MODULE nixxi.cppLINE 2764DETAIL
NiPConnect2SYSTEM CALL connectERRNO 10061ERRNO TEXT
WSAECONNREFUSED: Connection refusedCOUNTER
ERROR 2012-01-24 06:58:02
FCO-00011 The step createJSF with step key
NW_Onehost
ind
ind
ind
ind
0
0
NW_Onehost_System
ind
ind
ind
ind
1
0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind
|ind|ind|ind|3|0|createJSF was executed with status ERROR .
Could you please provide some solution for this?
with regards
Vinayak -
"Connect to SAP gateway failed" error message when we connecting bex to bw
any one can help in connecting bex with BW.
we got a error when we are trying to connect bex to bw from offshore. as we do not have basis consultant we only need to connect bex with BW.
"Connect to SAP gateway failed".
RFC_ERROR_COMMUNICATION
But it is working properly connecting to onsite team.
this is the first time we are connecting from offshore.You didnt answer the first question of when exactly are you getting this error message - during direct logon to BEx or using transaction RRMX. Anyways, I assume both are giving the error.
Check how the SAP logon pad is configured to access the BW server currently.
In our case the problem was resolved by using the server machine name instead of the IP address to logon to the BW server.
If you are currently using the IP address in the logon pad then change it to the server machine name instead.
Also, make this entry in your hosts file (windows>system32>drivers>etc>hosts) add an entry like:
<IP Address> <bw_server_machine_name>
save the file, reboot the system and then try logging onto BEx again.
If it still does not work - send me screenshots of the logon pad configuration you have for the BW server.
Hope this helps,
Regards,
Nikhil
Message was edited by: Nikhil Chowdhary -
Connect to SAP gateway failed Connect_PM TYPE=B
Hi experts,
I get the following error when i ping through JCO destinations on portals.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=B MSHOST=imtsapdev01 GROUP=CLUST R3NAME=DMI MSSERV=sapmsDMI PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '127.0.0.1:3310' not reached TIME Tue Jan 27 16:39:54 2009 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -10 MODULE nixxi.cpp LINE 2823 DETAIL NiPConnect2 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
However my JCO destinations were working perfectly until recently. I checked on the logon group. I have one called CLUST, which i use for this purpose.
I have also checked both service files and they have the following for the ECC server im connecting to.
3610 because its system number 10 i am connecting to.
sapmsDMI 3610/tcp
From the JCE destinations screen i cannot even ping the server. I can though when i log on to the server through remote desktop.
thanks and regards
dilanke
as a reply to nishants posts.
goto rz70
give hostname -->
service --> sapgw00 (sapgw(instance number)
execute it
click on yes
check rfc call (success or failed)
I have done this. i left hostname as "blank" gave service as "sapgw10"
The following is what i got as the output.
0: IMTSAPDEV01_DMI_10 : Execute program: SLDRFC
0: IMTSAPDEV01_DMI_10 : Execute program: SLDMSGSRV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDIPSERV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDINSTSP
0: IMTSAPDEV01_DMI_10 : Execute program: SLDINSTSC
0: IMTSAPDEV01_DMI_10 : Execute program: SLDGWSRV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDDBSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDCOMPSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDCLIENT
0: IMTSAPDEV01_DMI_10 : Execute program: SLDBCSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDAPPL_SERV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDASSOC
0: IMTSAPDEV01_DMI_10 : Collection of SLD data finished
0: IMTSAPDEV01_DMI_10 : Data collected successfully
0: IMTSAPDEV01_DMI_10 : RFC data prepared
0: IMTSAPDEV01_DMI_10 : Used RFC destination: SLD_NUC
0: IMTSAPDEV01_DMI_10 : RFC call failed: Error opening an RFC connection.
0: IMTSAPDEV01_DMI_10 : Existing periodic jobs removed. Number: 1
0: IMTSAPDEV01_DMI_10 : Program scheduled: 20090127 184357
1: IMTSAPDEV01_DMI_10 : Event-controlled job already exists; scheduling not necessary
so i guess its not successful. when i look at rz70 of a server where this works correctly its not succsessful either
if it is success then technical system name will be in sld
to restart sld --> /sld --> administration --> stop server --> restart server
or check in VA --> SLD data supplier value --> Runtime
I checked this and i do not see aa problem. you have configuration status as valid and send reult as Success
Services file is locted on OS level of R3 system--> Goto --> Start --> Run -> (type)Drivers(enter) --> etc -> (here is services file)
check ur r/3 server entry is there or not,
I have the followng in the service file for the server
sapmsDMI 3610/tcp
if not add itHi Experts,
when ilook at the remote gateway properties in SMGW this is what i see on the R/3 server. ive looked at my other system which i can connect to and there isnt much of a difference in the parameters. How can test this to see if it works?
Details of remote gateway
entry = 0
state = CONNECTED
local = 1
system type = REMOTE_GATEWAY
client = FALSE
wait for frag write = 0
suspended = 0
read/write socket = 4
HANDLE = 4
TIME = Sun Oct 19 18:54:14 2008
SOCKET = 1352
STAT = NI_CONNECTED
TYPE = STREAM IPv4
OUT = 48225 messages 48225 bytes
IN = 1 messages 64 bytes
LOCAL = 127.0.0.1:3310
REMOTE = 127.0.0.1:1297
OPTIONS =
connect = Sun Oct 19 18:52:17 2008
last request = Thu Jan 29 13:09:58 2009
conversation no = 0
thanks and regards,
dilanke -
RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
HI All,
Im getting the following error while trying to call a RFC through JCO.
{0}#1#com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=R3ip SYSNR=00 GWHOST=R3ip GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR hostname 'R3ip' unknown
TIME Thu May 15 12:13:36 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -2
MODULE niuxi.c
LINE 1529
DETAIL NiPGetHostByName2: hostname 'R3ip' not found
SYSTEM CALL gethostbyname_r
COUNTER 1
I know it has something to do with the entries in the services and hosts files of the portal server. Please guide me on links from help.sap.com on this.HI Dagfinn,
Very helpful answer. Thanks.
When you say :
4. Normally, the sap system should be registered in DNS, and you should need any. --- How do I check if my SAP system is registerd in the DNS? Is there some detail explaination on this.
Also,
I have these observations :
1. I checked the services file on my portal server and the entry for "sapgw00 3300/tcp" is maintained there.
2. There is no entry of my SAP ECC box in the hosts file of my portal server.
3. The group PUBLIC is not maintained in SMLG transaction.
4. I am using R3ip only in my code, there is no other place that this "R3ip" is being used.
Following is my code :
import com.sapportals.htmlb.page.*;
import com.sapportals.htmlb.table.DefaultTableViewModel;
import com.sapportals.htmlb.event.*;
import com.sapportals.portal.htmlb.page.*;
import com.sapportals.portal.prt.component.*;
import com.sapportals.portal.prt.resource.IResource;
import com.sapportals.portal.prt.session.*;
import java.math.*;
import java.util.*;
import java.util.Calendar;
import com.sapportals.portal.prt.service.jco.IJCOClientService;
import com.sap.mw.jco.JCO;
import com.sapportals.portal.prt.service.jco.IJCOClientPoolEntry;
import com.sap.mw.jco.IFunctionTemplate;
import com.sap.mw.jco.IRepository;
public class ReadModelData extends PageProcessorComponent {
public DynPage getPage(){
return new ReadModelDataDynPage();
public static class ReadModelDataDynPage extends JSPDynPage{
private class4bean class4bean = null;
protected IPortalComponentRequest request;
protected IPortalComponentSession session;
protected IPortalComponentContext context;
protected IPortalComponentProfile profile;
protected String userId;
protected String sapSystem;
private final static int INITIAL_STATE = 0;
private final static int OUTPUT_STATE = 1;
private final static int ERROR_STATE = 2;
private int state = INITIAL_STATE;
public void doInitialization(){
System.out.println("cpCv - Code is rendered: " + Calendar.getInstance().getTime().toString());
state = INITIAL_STATE;
DefaultTableViewModel tvm = new DefaultTableViewModel();
tvm = getData();
//class4bean = new class4bean();
class4bean.setModel(tvm);
session.putValue("class4bean", class4bean);
public DefaultTableViewModel getData() {
com.sap.mw.jco.IRepository repository;
JCO.Pool pool = JCO.getClientPoolManager().getPool("R3");
/* if (pool == null) {
// JCO.removeClientPool("R3");
JCO.addClientPool(
"R3",
10,
"040",
USER,
PWD,
"EN",
"R3ip",
"00");
if (pool == null) {
// JCO.removeClientPool("R3");
JCO.addClientPool(
"R3",
10,
"040",
"uname",
"pwd",
"EN",
"portalserver",
"40");
repository = JCO.createRepository("TTL", "R3");
JCO.Client client = null;
// Get a function template from the repository
IFunctionTemplate ftemplate =
repository.getFunctionTemplate("BAPI_SALESORDER_GETSTATUS");
// Create a function from the template
JCO.Function function = ftemplate.getFunction();
client = JCO.getClient("R3");
JCO.ParameterList input = function.getImportParameterList();
input.setValue("0053100700", "SALESDOCUMENT");
client.execute(function);
JCO.Table sales_orders =
function.getTableParameterList().getTable("STATUSINFO");
Vector row = new Vector();
Vector tbl = new Vector();
Vector colNames = new Vector();
// Loop over all rows
do {
// Loop over all columns in the current row
for (JCO.FieldIterator e = sales_orders.fields();
e.hasMoreElements();
JCO.Field field = e.nextField();
row.add(field.getString());
// System.out.println(field.getName() + ":\t" + field.getString());
} //for
tbl.add(row);
} while (sales_orders.nextRow());
sales_orders = null;
sales_orders =
function.getTableParameterList().getTable("STATUSINFO");
sales_orders.nextRow();
for (JCO.FieldIterator e = sales_orders.fields();
e.hasMoreElements();
JCO.Field field = e.nextField();
colNames.add(field.getName().toString());
DefaultTableViewModel dtvModel = new DefaultTableViewModel(tbl, colNames);
JCO.releaseClient(client);
return dtvModel;
public void doProcessAfterInput() throws PageException {
public void doProcessBeforeOutput() throws PageException {
class4bean myBean = new class4bean();
((IPortalComponentRequest)getRequest()).getServletRequest().setAttribute("myBean", myBean);
// fill your bean with data here...
this.setJspName("testJSP_.jsp"); -
Connect to SAP gateway failed Connect_PM TYPE=A
In past 4-5 days, some of messages are not processed in our XI production server.
I got the following error in the falied messages:
Seem to be some parameter need to be update for sap gateway.
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=dbcinpr SYSNR=15 GWHOST=dbcinpr GWSERV=sapgw15 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR connection to host dbcinpr, service sapgw15 timed out TIME Sun Oct 21 09:09:50 2007 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -12 MODULE nixxi_r_mt.cpp LINE 1067 DETAIL NiPConnect COUNTER 1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
Pls let us know if it is parameter related prolem or some other issue.
Regards
AmarHi Amar!
Test the status of the RFC destinations in transaction SM59 of XI and R/3 systems.
Also check this thread, I think they might be helpful:
Communication channel not working
RFC Receiver Adapter Error
JCO Destination creation error
RFC_ERROR_COMMUNICATION - time out
Reg Jco connections
RFC Adaptive Model,JCO destinations error
Regards,
Matias
PS: please award points if helpful. -
SAP_CMINIT3 : rc=20 Connect to SAP gateway failed when connecting SAP CR
Dear SAP Gurus,
I have the follwowing issue when I try to access SAP Crystal Reports 2011 on my desktop.
I can access the SAP ERP 6.0 back-end system without problem, but when I try to connect to SAP Crystal Reports, as soon as I enter my login details, I get the following error message:
Logon Failed.
Details: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=192.12.353.12, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 192.12.353.12:3300' not reached
TIME Thu Oct 27 12:02:17 201
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER 3
I can login to SAP Crystal Reports using other desktops, but cannot access using my own. This is the same for other people, they also cannot access using my desktop.
Thanks in advance, MarcHI Mark,
Are you and Ramish working together?
See this post for your answer: Connection keeps failing
Don -
RFC logon failed with message: Failed: Connect to SAP gateway failed
I installed CI instance fine and i am stopped here with this error at the end of DB instance install. Could someone let me know what could be the reason for this. Is there any fix or workaround to continue the install.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value hostSAP.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 09.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:543]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR 2006-09-16 01:13:02 [iaxxrfcimp.cpp:450]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
ERROR 2006-09-16 01:13:02
CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=hostSAP, GWSERV=sapgw09, ASHOST=hostSAP, SYSNR=09
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host hostSAP, service 3309)
TIME Sat Sep 16 01:13:02 2006
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r_mt.cpp
LINE 8528
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 146
ERRNO TEXT Connection refused
COUNTER 4
Thanks,
Ramat the end of the database instance installation SAPInst is doing some RFCs to the CI.
The logfile states that the gateway on host hostSAP with the systemnumber 09 is not reachable.
Please check if you have started the central instance on this machine.
peter -
Connect to SAP gateway failed during Installatio(SAP 2004s with Oracle10.2)
Hi,
I am doing SAP 2004S installation with Oracle10.2
Oracle installation completed.
SAP installation completed till step : ABAP post installation (28 out of 43 completed)
Now I am stuck in Check DDIC Password phase.
but my problem is not able to start Sap instance.
dev_rfc.trc says...
>TS> Mon Jul 13 11:34:02 2009
T:612 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ANK, GWHOST=INLD50057853A, GWSERV=3301
LOCATION CPIC (TCP/IP) on local host
ERROR internal error
(this retcode should be handled by caller of NI-layer)
TIME Mon Jul 13 11:34:02 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -8
MODULE nixx.c
LINE 1537
DETAIL NiCloseHandle: invalid hdl -1
COUNTER 12
>TS> Mon Jul 13 11:35:03 2009
T:612 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ANK, GWHOST=INLD50057853A, GWSERV=3301
LOCATION CPIC (TCP/IP) on local host
ERROR internal error
(this retcode should be handled by caller of NI-layer)
TIME Mon Jul 13 11:35:03 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -8
MODULE nixx.c
LINE 1537
DETAIL NiCloseHandle: invalid hdl -1
COUNTER 14
Could you please let me know what is problem here...where can I adjust gateway if it is the only problem.
Thanks,
Regards,
Ankit Baphnaalso dispatcher log says...
ue Jul 14 16:31:05 2009
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1611]
***LOG Q0K=> DpMsAttach, mscon ( INLD50057853A) [dpxxdisp.c 11163]
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 33
Release check o.K.
Tue Jul 14 16:31:45 2009
ERROR => W0 (pid 5556) died [dpxxdisp.c 13748]
ERROR => W1 (pid 2768) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 4376) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3708) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 5392) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W5 (pid 1544) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W6 (pid 3872) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-5556 (SIGUSR2)
ERROR => DpWpKill(5556, SIGUSR2) failed [dpxxtool.c 2586]
killing W1-2768 (SIGUSR2)
ERROR => DpWpKill(2768, SIGUSR2) failed [dpxxtool.c 2586]
killing W2-4376 (SIGUSR2)
ERROR => DpWpKill(4376, SIGUSR2) failed [dpxxtool.c 2586]
killing W3-3708 (SIGUSR2)
ERROR => DpWpKill(3708, SIGUSR2) failed [dpxxtool.c 2586]
killing W4-5392 (SIGUSR2)
ERROR => DpWpKill(5392, SIGUSR2) failed [dpxxtool.c 2586]
killing W5-1544 (SIGUSR2)
ERROR => DpWpKill(1544, SIGUSR2) failed [dpxxtool.c 2586]
killing W6-3872 (SIGUSR2)
ERROR => DpWpKill(3872, SIGUSR2) failed [dpxxtool.c 2586]
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1673
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jul 14 16:31:55 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Jul 14 11:01:55 2009
========================
and syslog says...
SAPBasis:MEssage server disconnected
SAP Gateway closed
Database error: 1017 at CON
ORA01017: invalid username/password; logon denied
Which username is this referring to?
Regards,
Ankit Baphna
Edited by: I041468 on Jul 14, 2009 1:09 PM -
Rfc conn.: Connect to SAP gateway failed , edit: Group PUBLIC not found
Hello!
I want to create a RFC connection.
In the "Connection and Transport"-Tab I fill out the fields: Target Host, System Number and System ID.
If I save the destination the fields Gateway-Host and Gateway-Service will be automatically filled out with the same input value of the Target Host field.
But there is no gateway for this system and if I ping the destination the following error message is shown:
Error during ping operation: Connect to SAP gateway
failed Connect_PM TYPE=A ASHOST=sma82 SYSNR=01
WHOST=sma82 GWSERV=sma82 PCS=1 LOCATION CPIC (TCP/IP)
on local host with Unicode ERROR service sma82
unknown TIME Thu Sep 27 11:27:37 2007 RELEASE
710 COMPONENT NI (network interface) VERSION 39 RC
-3 MODULE nixxhsl.cpp LINE 643 DETAIL
NiHsLGetServNo: service name cached as unknown
COUNTER 6
How can I handle this?Hi,
I have attempted to configure the Destination with a co-worker who successfully configured a Destination to the same R/3-System but with SAP NetWeaver 2004s and not with SAP Netweaver CE 7.1 SR1.
He said that in his case he connects to the Message-Server so we activated Load Balancing.
The Message-Server will be found now but the Logon Group cant be found:
Error during ping operation: Connect to message server host failed Connect_PM TYPE=B MSHOST=xxx.xxx.xxx GROUP=PUBLIC R3NAME=TDE MSSERV=sapmsTDE PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR <b>Group PUBLIC not found</b> TIME Tue Oct 02 12:28:09 2007 RELEASE 710 COMPONENT LG VERSION 5 RC -6 MODULE lgxx.c LINE 4392 DETAIL LgIGroupX COUNTER 15
But the Logon Group is PUBLIC! I checked it with SMLG.
Any ideas?
Regards,
Armin -
Connection to SAP gateway failed
I got the following error when i am connecting to BEX( through rrmx & direct from Business explorer) from offshore. onsite people are able to connect BEX.
as we do not have basis consultant we only need to resolve it.
please let me know what all the process I have to do. is there anything i need to contact network perople at client place. is there any settingss i need to do at sm59 tcode.
<b>please find following error message</b>
Error Group
RFC_ERROR_COMMUNICATION
Message
Connect to SAP gateway failed
Connect_PM GWHOST=10.235.245.95, GWSERV=sapgw05, ASHOST=10.235.245.95, SYSNR=05
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host 10.120.130.85, service 3305)
TIME Mon Nov 06 21:53:32 2006
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8602
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Thanks
LakshmiHi Lakshmi ,
As rightly mentioned by Ganesh, this is supposed to be handlled by Basis+hardware support team.
What you can do as temporary solution, use RSRT for Query Monitor.
And use query display as BEx/HTML, this way you can atleast see the result of query.
Hope it helps. -
Start services connector connect to sap gateway failed
hi experts
when i want to start services connector saprouter
saprouter string :/H/172.16.2.11/S/3299
a error window say
"connect to sap gateway failed
error partner 'host:3299' not reached"
where is the possible problem here ?
regards
ying xieDear Damian
i try to start services connector so that SAP could connect to us to support.
i have a little obfuscation about your telnet test. which should be my destination server, SAP's server?
how to test whether port 3299 is on work or not?any ways to check those ports are used for what?
many thanks
ying xie
Maybe you are looking for
-
How do you get a song to play for more than one slide???
I'm new to mac and I am trying to create a birthday video but the audio will not continue for more than 1 slide. I can do it in powerpoint but I want to burn the presentation onto DVD. Thanks for your help!
-
Firefox directed an upgrade to 3.6.4. Then said must install new Adobe flash. My Mac Processor is 1.2.Ghz (too small. Firefox said that if I didn't have it could damage my computor. It appears that I now have to dump the installed Adobe and then dump
-
Premiere CS6 won't start. Getting error message.
I am getting this error message: The procedure entry point ? DrawPixels@DC@UIF@@QEAAXPEBXHHHV?$ParamPoint@VCPoint@@@ASL@@@Z could not be located in the dynamic link library UIFramework.dll. My computer crashed and I had to reload Windows 7... fresh
-
Firefox didn't show any response to AUTOCOMPLETE="off", I try so many codes using jquery and html but no response, I implement this code in form tag as well as in input tag, in my registration form when ever the cursor focus on the username field alr
-
Can I use the battery from 4gb Zen Micro Photo in the 8gb Zen Micro Pho
Can I use the 3.7V Li-ion Polymer Battery 680mAh in my 8gb Zen Microphoto? The 8gb came with a 3.7V Lithium Ion Battery 830mAh.