Error while testing recovery plan

Hi!
From docs about SRM 6:
from Install guide
If you use vSphere Replication, do not select a placeholder datastore that you already use
as the target datastore for replications.
from admin guide:
The replicavirtual machine that vSphere Replication creates and the placeholder virtual machine that
Site Recovery Manager creates can both reside on the same datastore on the recovery site because they are
created in different datastore folders. When the replica and placeholder virtual machines are in the same
datastore, Site Recovery Manager creates the placeholder virtual machine name by using the replica virtual
machine name with the suffix (1). Site Recovery Manager applies the inventory mappings to the
placeholder virtual machine on the recovery site.
so, I guess the best practice is mentioned in the Install guide

Yes, you can consider the suggestion in the Install guide as "Best Practice". Using the same datastore for placeholders and target for replication is supported, but can create confusion with multiple folders created for the same VM.
Best Regards
Stefan Tsonev

Similar Messages

  • Error while updating a plan

    Hi,
    I have encountered an error while updating a plan. While i update the uplan , the grid gets filled but it throws a message stating
    "Maximum Number of Result Blocks has been reached"
    Maximum number of Result Blocks has been reached.
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0xD4]
    Error while processing the data for the step 'Grid'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Maximum number of Result Blocks has been reached.
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0xD4]
    Error while processing the data for the step 'Grid'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Update of Plan "deposittest created 7/19/2007 5:11:50 PM" failed.
    [Oracle BAM Enterprise Link error code:  PlanMgr -- 0x1, PlanMgr -- 0xD5]
    The data updation stops after the row count 49900.
    Please help to resolve this error .
    Thanks in advance.
    Regards,
    Lathika

    Hi,
    in BAM-Administrator you should rraise Parameter "MaxResultBlocks".
    BAM originaly is al licensed Software from Group1 named "Sagent Data Flow".
    This may help searching the web.
    Greetz,
    GOI

  • Error while updating the plan in Enterprise link

    hi
    i am getting an error while updating the plan which polls the JMS topic and inserts into the grid.
    IMessageSourceReceiver->messageReceive: javax.jms.JMSSecurityException: JMS-232: An invalid user/password was specified for the JMS connection
         at oracle.jms.AQjmsDBConnMgr.checkForSecurityException(AQjmsDBConnMgr.java:916)
         at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:601)
         at oracle.jms.AQjmsDBConnMgr.<init>(AQjmsDBConnMgr.java:238)
         at oracle.jms.AQjmsConnection.<init>(AQjmsConnection.java:183)
         at oracle.jms.AQjmsTopicConnectionFactory.createTopicConnection(AQjmsTopicConnectionFactory.java:209)
         at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:94)
         at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
         at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
    [Oracle BAM Enterprise Link error code:  0x75 -- 0x1, 0x75 -- 0x3A]
    Error during Message Receive operation.
    [Oracle BAM Enterprise Link error code:  0x75 -- 0x1, 0x75 -- 0x3B]
    Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
    [Oracle BAM Enterprise Link error code:  DC -- 0x1, DC -- 0x83]
    Update of Plan "Untitled, created 3/11/2009 3:56:28 PM" failed.
    [Oracle BAM Enterprise Link error code:  PlanMgr -- 0x1, PlanMgr -- 0xD5]
    the username and password that i have given are valid and i have given privileges that were mentioned on the technote to the user. can somebody help me out in resolving this as this is very critical for me right now
    Thanks in advance

    I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
    Content Server Request Failed
    Unable to update the content item information for 'HO000128'.
    The content ID must be specified.
    Please help to resolve.
    Thanks in advance
    Prasad

  • Error while testing the endpoints in Service Registry

    Hi,
    I am getting the following error while testing the endpoint in the Service Registry
    Invalid Response Code: (404) Not Found. The request URL was:"http://<server>:8000/sap/bc/srt/wsdl/bndg_DD73518A3AD471F18558001D0910D3CA/wsdl11/binding/ws_policy/document?sap-client=800". Check, whether the URL is correct, and the Web Service that you are requesting is up and running.
    I have created an Enterprise Service at the backend and have published to the Service Registry of the CE server , but while testing the endpoint in service registry i am getting error.
    Can any one please help me to solve this issue.
    Thanks & Regards,
    Hamsa Shree

    Hi hamsa,
    Have you tested the service? If It works, maybe there's something wrong with your destination configuration.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/705459a3-bf1c-2b10-8a9d-d300ada5f0fc
    You may find a solution in the above article.
    Good luck!
    Wenhao

  • Error while Test Connection with Connector

    hi all:
         there is an error while  Test Connection with Connector , I also test it through sys administration->sys configuration->
    suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
    ***************ERROR 1 while *error while Test Connection with Connector ******************************************************
    Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this
    system object
      Results
    Retrieval of default alias successful
    Connection failed. Make sure that Single Sign-On is configured correctly
    ************error sys administration->sys configuration-> suport -> sap transaction        ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
    .runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
    9##0#0#Error##Java###04:4524/05/10_0077_6087550
    [EXCEPTION]
    #1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
    &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
    Please check the protocol and host entries for system &\#39;sapdev&\#39;.
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
    (AbstractIntegratorComponent.java:123)
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
    (ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

    Hi,
    As per this part of the trace:
    Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
    You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
    (WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system  object
    with the hostname of the ITS server.
    Generally the template is
    <System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
    So that's why you got
    Please check the protocol and host entries for system ..

  • Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

    Dear S&OP community,
    I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
    This what I did...
    1) Created new attributes and master data objects and activated them successfully.
    2) Time profile created and activated successfully
    3) Trying to create planing area by assigning  time profile in step 2 and assigned master data from step1..Unable to save the data and system returns 
    this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
    My understanding is time profile needs to be active  but doesn't have to have values...
    Any help is appreciated.
    Thanks,
    Krishna

    YS,
    Here are my time profile settings
    Level       Name          Display Horizon - Past  Display Horizon - Future
    1             Monthly     -6                                       11         
    2             Quarterly     -2                                       3
    3             Yearly        -1                                       2
    Time profile is active and but time profile data is not loaded
    Thanks,
    Krishna

  • Error while testing demo app:Internet Explorer cannot display the webpage

    HI Gurus,
    I am new to the webdynpro development. I was starting with building demo application. However, finding below error while testing it using se80 transaction. Please suggest if any configuration is missing or anything else.
    I am using ECC6 : 720 Final Release....
    Error is below :
    This problem can be caused by a variety of issues, including:
    u2022Internet connectivity has been lost.
    u2022The website is temporarily unavailable.
    u2022The Domain Name Server (DNS) is not reachable.
    u2022The Domain Name Server (DNS) does not have a listing for the website's domain.
    u2022There might be a typing error in the address.
    u2022If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section.

    Thanks sanasrinivas,
    I did the steps as mentioned by you. I also checked the link http://wiki.sdn.sap.com/wiki/display/EP/12ITSWebGUI-Activation(BackEnd) to activate the its webgui. Now the new error is coming as mentioned below.
    Note: After running webdynpro application a login screen apears and after giving uid and pwd following error appears. however, while testing the service in sicf, logon happens successfull.
    The URL ).
    Please let me know if anything is missing or the further steps i can take.
    Thanks,
    Janisar
    Edited by: janisar.munshi on Feb 15, 2012 3:33 PM
    Edited by: janisar.munshi on Feb 15, 2012 3:36 PM

  • "RABAX" occurs on server side error while testing asynchoronous web service

    I got error while testing asynchronous web service in WS navigator. I have created asynchronouse web service using RFC. Then I configured it in SOAMANAGER. When I tested it, got error "RABAX occurs on server side". Also I got dump in ST22. It is 'UNCHAUGHT_EXCEPTION - CX_SOAP_SEQ_SCD_ERROR'.
    I have tested for synchronous web service it works fine.  I found a difference in both web service WSDL file for below parameters value -
    commit
    blocking
    transaction
    wsrm
    I tried different way .. but no solution .. Plz suggest if someone have any idea.....Its very helpfull....

    your problem:
    Missing class: oracle.tip.adapter.jms.JmsManagedConnectionFactory
    Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
    Loader: oracle.bpel.common:10.1.3
    Code-Source: /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar
    Configuration: <code-source> in /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml
    It happens when server is custom installed, try to reinstall it as full version and problem should disappear otherwise your need another full installation to retrieve and replace orabpel.jar file from (or maybe more)

  • Receiving the internal 500 error while testing java web service

    HI,
    Problem Summary:
    Receiving the internal 500 error while testing java web service in integrated weblogic server.
    my scenario is like,
    retrieve the Payload from Dehydration tables.
    We are connected to SOA_INFRA schema and we are retrieving the payload from the dehyadration tables based on InstanceId and ECID using Java Classes.After that i make it as a web service and i deployed in to intergrated weblogic Server.It is generating the Target End Point URI.When am i hitting this it is showing structure of the service.I am testing this service from soapUi it is returning the Server internal error with 500.Here i am passing inputs as InstanceId and ECID.
    I had verified in my Jdeveloper,Proxy settings are available.
    Error Payload:
    I am receiving the Internal 500 error because of JDeveloper HTTP Analyzer encountered an error retrieving: CONNECT https://192.168.0.41:9102 HTTP/1.0.
    An exception occurred while retrieving the response for https://192.168.0.41:9102.
    javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.checkEOF(SSLSocketImpl.java:1293)
         at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:65)
         at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:50)
         at oracle.jdevimpl.webservices.tcpmonitor.model.HttpMessageBase.readLine(HttpMessageBase.java:658)
         at oracle.jdevimpl.webservices.tcpmonitor.model.HttpRequest.read(HttpRequest.java:327)
         at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.getResponse(ConnectionHandler.java:405)
         at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.run(ConnectionHandler.java:331)
    Caused by: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
         at com.sun.net.ssl.internal.ssl.InputRecord.handleUnknownRecord(InputRecord.java:523)
         at com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:355)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:798)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1165)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.getSession(SSLSocketImpl.java:1916)
         at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.negotiateSSL(ConnectionHandler.java:707)
         at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.negotiateForwardedSSLConnection(ConnectionHandler.java:672)
         at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.run(ConnectionHandler.java:311

    An exception occurred while retrieving the response for https://192.168.0.41:9102.
    javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?This error says that port 9102 is a plain HTTP port so either use the correct port (which is listening for HTTPS connections) or use HTTP instead of HTTPS in the URL.
    Regards,
    Anuj

  • Error while testing the webservice through SOAMANAGER

    Hi All,
    I have created a webservice from a Function module ( RFC enabled). I am getting an error while testing the webservice from the SOAMANAGER but the function module is working fine giving proper output.
    The error is
    REQUEST:
    POST /sap/bc/srt/rfc/sap/zws_test_cms_bp_fac/600/zws_test_cms_bp_fac/zws_test_cms_bp_fac HTTP/1.1
    Host: ed1app.corp.fcc.ca:49000
    Content-Type: text/xml; charset=UTF-8
    Connection: close
    Authorization: <value is hidden>
    Content-Length: 654
    SOAPAction: ""
    <?xml version="1.0" encoding="UTF-8" ?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Header><sapsess:Session xmlns:sapsess="http://www.sap.com/webas/630/soap/features/session/"><enableSession>true</enableSession></sapsess:Session></SOAP-ENV:Header><SOAP-ENV:Body><ns1:ZSRAV_TEST_CMS_BP_FAC xmlns:ns1='urn:sap-com:document:sap:rfc:functions'><IT_BP_LIST><item><BP_NUMBER>9999990013</BP_NUMBER></item></IT_BP_LIST><IV_COMPANY_CODE>FCC</IV_COMPANY_CODE></ns1:ZSRAV_TEST_CMS_BP_FAC></SOAP-ENV:Body></SOAP-ENV:Envelope>
    RESPONSE:
    HTTP/1.1 500 CX_ST_REF_ACCESS:XSLT exception.An error occurred during serialization in the simple transformation program /1BCDWB/WSSE2B50F3FDFC9C2A94B7.Access to the table ref. node 'ZSCMS_FAC_CAG_DETAILS' outside a loop
    Set-Cookie: <value is hidden>
    content-type: text/xml; charset=utf-8
    content-length: 0
    accept: text/xml
    sap-srt_id: 20100202/041112/v1.00_final_6.40/4B67E41A4BC41B7CE10000000A013104
    server: SAP Web Application Server (1.0;700)
    please do the needful.
    Thanks in advance

    Hi,
    Here is a very smart tool for webservice test:
    [soapUI|http://www.soapui.org/]
    It works fine for me!
    bg,
    attila

  • Please tell what to do if I see this error while opening an plan or while saving this plan?

    Error messsge: the enterprise global already contains a table named “Enterprise Entry”.
    Do you want to replace the table with the one from the enterprise global, replace all items with duplicates, rename the table in the project, or cancel opening the project.
    Please tell what to do if I see this error while opening an plan or while saving this plan?

    A-K-J --
    The error message indicates that your Project Server administrator has accidentally polluted the Enterprise Global file with local view and/or tables.  The solution does not lie with the user.  It does not really matter what button the user clicks
    in the dialog, since only the Project Server administrator can solve this problem.  To solve the problem, the Project Server administrator must do the following:
    Open the Enterprise Global file editing.
    Click File > Organizer.
    On the right side of the Organizer dialog (in the Enterprise Global file), delete any non-enterprise views.  There should be NO views named Gantt Chart, Resource Sheet, etc.  The only default enterprise view is named Enterprise Gantt Chart, which
    should not be deleted.
    Click the Tables tab.
    On the right side of the Organizer dialog, delete any non-enterprise tables.  There should be NO tables named Entry, Work, Cost, etc.  The only default enterprise table is named Enterprise Entry, which should not be deleted.
    Click the Close button.
    Save the Enterprise Global file.
    Close the Enterprise Global file.
    Close Microsoft Project, relaunch the software, and log into Project Server again.
    After completing the above steps, every PM should also exit Microsoft Project and relaunch the software again.  Hope this helps.
    Dale A. Howard [MVP]

  • Error while testing SOAP scenario

    I have done SOAP(Sender)--SAP-PI- SOAP(RECEIVER) Scenario. It is in synchorous mode..
    It works fine in Altove XML Spy.. and getting the response fron webservice..
    but when i;m testing it PI (RWB->Comp Monit>Integration engine-->Test Messge ) it gives me error
    " Error While Testing: Method Not implemented "
    Can anyone please help me on this.. What acould be the reason.. for this..
    Regards,
    deep

    Sunil, Thanks For your Reply...
    Payload is correct.. and mapping is also fine. I'm getting reponse from Webservices using XML SPY..
    But i have seen one warning about Integation Engine : Is Websecurity Available : Communication error Proxy calls are not permitted on sender or receiver side on the IS (client)  in Component monitoring..
    Does this warning cause this error  anyway.. ?  Because i'm getting error even in XML SPY when i defined business system as Sender and Receiver as Business Service. But if i define both are as Business Serivces.. it works fine.. (in XML SPY)
    But in both cases i'm failing in RWB(INtegration engine-:>Test message)
    Is there any relation to above mentioned warning " Is Websecurity Available : Communication error Proxy calls are not permitted on sender or receiver side on the IS (client)  in Component monitoring.. "
    Regards,
    Deep

  • Error while testing  FP_TEST_00

    Hi,
    I configured ADS in my machine where ABAP and JAVA stacks are running on same WAS.
    I did so many times but i never faced this error while testing FP_TEST_00 program.
    i'am getting this errror
    "ADS:com.adobe.processingexception:problem accessing d(200101)
    Message No.FPRUNX001"
    I checked with the sap notes and some blogs on FPRUNX001 error and i followed those documents where i couldnt find any problem in configuration.
    i think problem is with adsuser id but all the necessary security roles and groups are assigned to ADSUser as per the document.
    Please guide me with a solution.
    With Regards,
    Pradeep.B

    You are saying abt the HTTP destination which we need to create in Visual Admin right.
    Yes i created that FP_ICF_DATA_SID and the url maintained is http://hostname(Abap):portnumber (http port of ABAP),user ADS_AGENT and its password are maintained and when i click on save and test it is giving me the succesfull message.
    Infact i tested by extending the url http://hostname:portnumber/sap/bc/fp/fp_test_00.xdp
    it is showing me the success message.
    yes it NW 7.0
    With reagdrs,
    Pradeep

  • Error While Testing the Bean

    Hi All,
    Can anyone suggest me how to approach for the below error while testing the bean in the Browser :
      The requested resource /ClaculatorLgWeb/CalculatorLg.jsp is not available
      Details:   File [ClaculatorLgWeb/CalculatorLg.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
    Thanks & Regards

    Hi Venkat,
         The error says that it is unable to find the jsp's in the application.
         You check that the CalculatorLg.jsp, CalculatorLg.jsp and the entire application is active and also check that it is deployed properly.
    Regards,
    Azaz Ali.

  • Error while testing the self registration approval workflow

    Hi all,
    I am getting the following error while testing the self registration approval workflow.
    Here the request level approval is working fine.But the operation level is not working.
    <May 28, 2012 11:25:01 AM IST> <Error> <oracle.iam.request.impl> <IAM-2050126> <Invalid outcome com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}runtimeFault}
    messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
    parts: {{
    summary=<summary>oracle/iam/platform/OIMClient</summary>
    ,detail=<detail>java.lang.NoClassDefFoundError: oracle/iam/platform/OIMClient
    at orabpel.approvalprocess.ExecLetBxExe0.execute(ExecLetBxExe0.java:182)
    at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:39)
    at java.lang.Thread.run(Thread.java:662)
    </detail>
    ,code=<code>java.lang.NoClassDefFoundError</code>}
    cause: {oracle/iam/platform/OIMClient}
    received from SOA for the request id 61.>
    <May 28, 2012 11:25:01 AM IST> <Warning> <oracle.iam.callbacks.common> <IAM-2030081> <[CALLBACKMSG] Inside Status Change plugin for request 61 and the status is : Request Failed.>
    er and operation is CREATE.>
    <May 28, 2012 11:25:01 AM IST> <Warning> <oracle.wsm.agent.handler.wls.WLSPropertyUtils> <BEA-000000> <WLSPropertyUtils:getOperationName(),operation name is null>
    How to resolve this issue?
    Please anyone suggest me.Thanks in advance.
    Regards,
    Deena.

    Deena,
    Please make sure the path is correct. also why .zip, why : at the end why blank space? These could be a problem.
    /home/oracle/Oracle/Middleware/Oracle_IDM1/server/client/*oimclient.zip*:/home/oracle/Oracle/*Middleware/ oracle_common*/modules/oracle.jps_11.1.1/jps-manifest.jar:
    Below is correct one.
    $MW_HOME/Oracle_IDM1/server/client/oimclient.jar:$MW_HOME/oracle_common/modules/oracle.jps_11.1.1/jps-manifest.jar
    If you have custom workflow, be sure in task assignment proper outcome approve or reject.
    Thanks,
    Kuldeep

Maybe you are looking for