Error while transfer from DP to SNP in process chain

Hello All,
I am gettting a error message as below
6875 characteristics combinations processed
3606 characteristics combinations successfully saved
0 characteristics combination not saved
3269 characteristics combination contained errors
and strangely when I repeat the process chain its actually comleted are the times series not attached?.
Thanks in advance,
Kumar

Hi Kumar,
Could you please elaborate on the error for the 3269 by looking
at the job log. Also check livecache connectivity was proper
at the initial run
Regards
R. Senthil Mareeswaran.

Similar Messages

Error while extracting from BI source

Hi,
We are facing a wierd problem:
Scenario:
Loading data from one DSO to another DSO with the help of transformation
The DTP fails at second data package each time. First data package goes successfully but it fails at the second data package) We have tried to vary the data package for e.g. 100 records, 5 records etc.....no matter what we do the load fails at the second data package with the following error message.
Error:
Data package processing terminated
Error while extracting from source EPUD0002 (type InfoProvider)
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Unknown error in SQL interface
Error reading the data of InfoProvider EPUD0002
Exception CX_RS_STEP_FAILED logged
Workaround:
We tried to increase the number of data package size so that all the records can be processed in only one data package and the load has never to request for 2nd data package . BUT as the data package size is big it takes long time to process and never completes....
FYI...Our transformation has lots of abap coding ...
Addn Info:
SAP_BW 700 0010
BI_CONT 703 0005
SAP_BASIS 700 0010
Any help will be highly appreciated...
- Amit

There must be some bug in the code which is causing this issue.
try to debug it,
refer: /people/community.user/blog/2007/03/29/sap-netweaver-70-bi-extended-capabilities-to-debug-a-data-transfer-process-dtp-request
/people/dirk.herzog/blog/2005/02/11/abap-development-in-sap-bw

Error while deleting from BIA index

HI EXPERTS GETTING BELOW ERROR PLZ GIVE CLARITY ON THIS:
1.A communication error occured, with the TREX TcpIp
2.Error while deleting from BIA index; reconstruction required
THANKS &REGARDS,
rAMESH,

Dear Ramesh,
Please check the connection with BIA. Please ask the Basis team to check the BW to BIA connection if they maintain it.
YOu can go to rsddbiamon2 and check BIA connection availibility for more details.
If that is right please try redoing the step at which you faced error and it should help.
Please close the question if you have got the answer or solved it.
Regards,
Den

Error while navigating from a report in OBIEE

I get the below error while navigating from one report to another report
Odbc driver returned an error (SQLExecDirectW).
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 16001] ODBC error state: 37000 code: 1101 message: [Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate a new page for database 'TEMPDB'
because of insufficient disk space in filegroup 'DEFAULT'. Create the necessary space by dropping objects in the filegroup
, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup..
[nQSError: 16015] SQL statement execution failed. (HY000).
Any inputs on this is highly appreciated.
Thanks,
Vasavi

Hi Vasavi,
There is no Temp space in Data base to run queries .Please contact your DBA to increase your db size
thanks,
saichand.v
Edited by: Saichand Varanasi on Jul 14, 2010 7:35 AM

SDM Error while deploying from IDE

Hi I am getting an error while deploying from IDE.
-- Server XXX did not accept login request as admin on port 50018.Details: ERROR: Could not establish connection to server XXX at port 50018: XXX
This problem has been discussed herein SDN earlier.I also checked in the SDM trouble shooting guide and accordingly have added a entry in the host file under sys32/drivers, but still I continue to get that error.Any pointers will be appreciated.
Regards,
Muinul

Hi
Have you ever been able to deploy into SDM. What is the password that you type. Try typing SDM and see. If that doesnt work then you will have to change the password of your SDM. Your password either has been corrupted or changed
Anyway follow these steps
1. Start the Config Tool.
(Execute <SAPj2eeEngine_install_dir> \configtool\configtool.bat.)
1. Select the secure store node.
The configuration for the secure storage in the file system appears.
1. Select the admin/password/<SID> entry.
2. Enter the administrator user's new password in the "Value" field and choose "Add".
3. Choose "File" --> "Apply" to save the data.
Note: Contrary to the message that appears, you do not need to restart the server or cluster for this change to take effect.
4. Finally restart SDM server.
Hope that helps. Let me know if you require more information
regards
Ravi

Error While Importing from EIF file into AW

Hi All,
I am facing the following error while importing from EIF file into AW using AWM as well as from sql prompt.
java.sql.SQLException: ORA-36786: (IOSEC04) File POCAW/abc.eif does not exist or cannot be accessed.
ORA-06512: at "SYS.DBMS_AW", line 42
ORA-06512: at line 1
at oracle.olap.awm.eif.eifimport.ImportDialogActionThread.doExportOrImport(ImportDialogActionThread.java:172)
at oracle.olap.awm.eif.EifDialogActionThread.doAction(EifDialogActionThread.java:58)
at oracle.olap.awm.ui.dialog.ThreadedDialogActionThread.run(ThreadedDialogActionThread.java:49)
i have already created the directory pocaw.
i have done the following steps :
CREATE OR REPLACE DIRECTORY POCAW as 'D:\Olap_POC\export';
GRANT all ON DIRECTORY POCAW to PUBLIC;
execute dbms_aw.execute ('aw create ''POC_AW''');
execute dbms_aw.execute('cda pocaw');
execute dbms_aw.execute('dtb attach POC_AW rw');
execute dbms_aw.execute('import all from eif file ''/abc.eif'' dfns update ');
any idea or thought would be appreciable.
thanks n advance
anwar

execute dbms_aw.execute('import all from eif file''/abc.eif'' dfns update ');
Maybe one of the following file names could help
(have never tried it):
''abc.eif''
''POC_AW\abc.eif''Yes,
you don't need the slash. CDA is like setting a default directory.

Message failing in SXMB_moni----Error while reading from the secure store

Hi,
The scenario is as below
A file is picked up from a folder and processed to enrich it.This enriched file is then written back in a different folder.
The message is failing in sxmb_moni while trying to write the file in the folder.
The PI system is a system copy of another system and few of the configuration objects are transported through a tpz file to this PI system.The file receiver channel used to write this file is also transported through this tpz file.
Below is the error seen in moni.:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText>Error while reading from the secure store: ERROR_U: No service user password found for Adapter Engine</SAP:AdditionalText><SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine
</SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
Below is Trace log:
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP"></Trace>
<Trace level="1" type="T">error reading secstore:Error while reading from the secure store: ERROR_UNKNOWN: System-dependent data for entry changed: / (SECSTORE,031) </Trace>
<Trace level="1" type="System_Error">Error while reading access data (URL, user, password) for the Adapter Engine </Trace>
</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing! </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace>
Is this because PI system is a system copy of another system ?
Regards,
Sneha

Error while reading access data (URL, user, password) for the Adapter Engine
Check out Michal's reply:
Re: URL for Central Adapter Engine
As you said there was a system copy it may be the case that some things were not configured properly

Syntax errors while migrating from non- unicode to Uni code

What are the syntax errors while migrating from non unicode to Uni code

Hi Sudheer,
u can get the information related to errors while migrating from non- unicode to Uni code from the below...pls go through...
Note 765475 - Unicode Conversion: Troubleshooting
these are the notes related to the issues of migration form non unicode to ounicode.
Related Notes
986907 - SQL Server settings for R3load based system copy
954001 - Error fix: ILLEGAL_SUBSTRING_MODIFICATION in SUMG
936441 - Oracle settings for R3load based system copy
928909 - Repair table data in SUMG in Unicode systems
895804 - Problematic rows in table DMEE_TREE_NODE
895560 - Support for languages only available in Unicode system
885441 - Common Migration Errors
842788 - DB Multiconnect: Unicode Migration
837173 - RADCUCNT in Unicode Conversion: Collective Note
756534 - Automatic Assignment of Languages with Character Statistics
753334 - Unicode Conversion: Problem in Japanese device types
726954 - Private Use Areas in Unicode Systems
722193 - RFC legacy non-Unicode clients and Unicode servers
718329 - R3load terminates the export during a Unicode conversion
695196 - Error in the export for Unicode migration
672835 - Textflags could cause problems during Unicode conversion
627764 - Unicode migration: table pools inconsistent after conversion
614550 - Troubleshooting BC-I18
587896 - Add. info on upgrade to SAP R/3 Enterprise Core 4.70 SR1
573044 - Unicode conversion for HR application
480671 - The Text Language Flag of LANG Fields
379940 - Unicode based mySAP availability
79991 - Multi-Language and Unicode support of SAP applications
73606 - Supported Languages and Code Pages
42305 - RSCPINST (I18N configuration tool)
regards,
rudra..
Assign points if helpful

DPM encountered an error while reading from the recovery point used for recovery.

Hi Guys I'm getting this error:
DPM encountered an error while reading from the recovery point used for recovery. Either the recovery point no longer exists or, if you
selected a share for recovery, the path to its contents is missing from the recovery point. (265)
The DPM Server is on Windows 2012 DPM is 2012R2 4.2.1273.0
The Server being backed up is 2012 R2 with DPM Agent 4.2.1273.0
The Server has 3 Data Volumes (C: Drive) and D and E its the D and E drive that i get this error if i try and recover data from DPM. the C Drive is fine. the D and E Drive are different
in that 1 De-dupe is enabled and 2 the Shadow Copies for these Volumes are stored on separate Disks F and G respectively.
I've removed the Protection from drives D and E and reinstated it but every recovery point created
brings up the same error message. I'm not sure where to go next do I need to Protect the Disks that have the Shadow copies on also? Many thanks in advance Gordon.

Hi,
It seems you are in a configuration where the Windows 2012 based DPM server does not understand how to read Windows 2012 R2 Dedup data structure which is what the DPM replica volume is.
See the DPM supported and unsupported scenarios
here under the deduplication issues section.
We have a fix in DPM2012 R2 UR5 that will protect the Windows 2012 R2 dedup volume in a non-dedup state on the DPM Server, but unfortunately that will not allow previous recovery points to be read.
KB3021791-Description of Update Rollup 5 for System Center 2012 R2 Data Protection Manager
Backup job for dedupe-enabled volume on Windows 2012 R2 fails. For example, Data Protection Manager backup might fail for following setup:
Data Protection Manager2012 R2 is installed on Windows Server 2012.
Data Protection Manager is protecting a dedupe-enabled volume on Windows Server 2012 R2.
This also applied to restores as the above was for D2D2T backup that may fail as it needs to read the recovery point to back it up to tape.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Error while extracting from source type InfoProvider)

Dear Sdns,
Am trying to load the data from the exisitng standard cube to one new ZCUBE.. The time when am loading the data. am getting the following errors...
<b>- Data package processing terminated
- Error while extracting from source 0FIGL_C10 (type InfoProvider)
- ORA-01652: unable to extend temp segment by 128 in tablespace PSAPTEMP
- SQL Error: 1652
- Exception CX_RS_STEP_FAILED logged</b>
Can any one help me out from this issue...
Answering getz appreciated,
Warm Regards,
Hemanth Aluri

Hi,
It seems like Table space problem..check with your basis team.
regards,
raju

Error while extracting from DSO

Hellow ! ! !
Got a error message.
Scenario:
Tried Loading data from one DSO to another DSO through transformation.
But, got a following error message.
Error:
Error while extracting from source 0FIGL_O02 (type DataStore)
Message no. RSBK242
Inconsistent input parameter (parameter: <unknown>, value <unknown>)
Message no. RS_EXCEPTION101
System:
SAP_BW:700
Support Package: SAPKW70016
Regards,
DongSun Choi

Got same results though tried several times.
Updated well from DSO after Changing from transformation to update rule.
Think the transformation is some problem.
Thanks a lot...
dongsun, choi

I am havig an error while shifting from one tab to the other mozilla firefox stops for some seconds.

error while shifting from one tab to other''''''

I've followed what I can of that error, and from what I'm reading, your hard disk is doomed. Some people report that they've been able to reinstall OSX on the same disk and use it for as long as a few months, but eventually the error returns.
Here's what I suggest:
Step 1: Backup everything you want to keep immediately!
Step 2: Buy new disk.
Step 3: Install new disk.
Step 4: Reinstall everything & restore.
I highly suggest backing up as soon as possible. -- On the first day of this error my MBP would no longer boot. Thankfully, I was able to save most of my stuff using the terminal window available in the installer.
Searching for that error code here & on google returns a fair number of hits so you can read what others have done as well. Some seem to be able to get a new drive from apple if it's still under warranty.
Good luck!

Calling an ABAP Program from source system in a process chain

Hi,
I need to call an ABAP program (Extract program RMBWV308) from R/3 within a Process Chain in BW 3.5
Your urgent advice please

Hi,
check the following link:
Start an ABAP program in R/3 from a process chain in BW
regards,
raju

Adding mail ids & Removing mail ids from the last step of process chain

Hi
Can you please guied me how to do this.
Adding mail ids & Removing mail ids from the last step of process chain.
Thanks
Subbu

You can refer the following thread.
email alert for process chain
Still I would suggest to search the forum. There will be many threads and articles on this which can help you out.

Error while transfer data from SNP

Dears,
Am facing the below error while trying to transfer the data from DP .(SAPAPO/MC90
Thanks for the help

Hi Vijesh
You may start looking into the issue by checking whether all Product/Location mentioned in the seletion exists as CVC in MPOS. This should be followed by running a consistency checks through /SAPAPO/TS_LCM_CONS_CHECK. This previous post may be helpful - https://scn.sap.com/thread/654202.
Thanks,
Prasun

Error while transfer from DP to SNP in process chain

Similar Messages

Maybe you are looking for