Error while transfer simulation version to operative.

Hi Experts
I tried to transfer a simulation to operative in CJV4.
But i experienced the below message:
Backward scheduling (enter finish date)
Message no. CO028
I could not find the reason, since all the the networks have start and finish dates, still i am unable to tranfer sim to operative.
Please advise the action.
Warm regards
ramSiva

ramSiva,
As fas as I know, it is not necessary at all to maintain forecast dates before transfering from sim to operative.
As per your reply I understand that no forecast dates were maintained in the operative project before transfering to sim and that no forecast dates are maintained in the sim before transfering back to operative. Is this so, isn´t it?
I cannot think of a reason why this may be happening.
Maybe ask OSS ???
Sorry for no better answer
Regards
Martina

Similar Messages

CJV4 Error while transfer Simulation to Operative

Hi Experts,
I have created SIM1 from an Operative project in CJV4
Then i modified the SIM1in project builder (included new objects: WBS, activity, component).
Then i attempted transfer SIM to Operative.
I experienced below error: Error u201CData cannot be saved Message no. CJ036u201D
Can I have guidance here?
warm regards
ramSiva

ramSiva,
As fas as I know, it is not necessary at all to maintain forecast dates before transfering from sim to operative.
As per your reply I understand that no forecast dates were maintained in the operative project before transfering to sim and that no forecast dates are maintained in the sim before transfering back to operative. Is this so, isn´t it?
I cannot think of a reason why this may be happening.
Maybe ask OSS ???
Sorry for no better answer
Regards
Martina

Simulation version to Operative project

Hi experts,
I am unable to create an operative project structure from a simulation version using project builder.
My req:
I have sim version: T-90001/ SIM001
I wish to create operative project T-90001
I can use CJV4 for transfer of project. But is it possible in CJ20N?
Warm regards
ramSiva

Hi Ravi
Thanks for your response
Please look at the link http://help.sap.com/saphelp_erp60/helpdata/en/0b/ba853488601e33e10000009b38f83b/frameset.htm
There is an illustration which depicts that,
- Project P1234/version 0001 --> Project 1234 --> Project P1234/Version 0002 --> Project P1234
As per this illustration, the project number remains same.
As you said, the transaction CJ20N is not allowing me to transfer the simulation version to operative project.
But, i am experiencing a dump error while trying to transfer simulation to operative in CVJ4.
At the conclusion, i mean to say that irrespective of transaction code, this may be allowed.
Please comment.
warm regards
ramSiva

Error while saving new Version

Hi,
I am creating a new version in DRM by using Copy to New feature but I am getting an error while saving that version.
The version gets created successfully but it does not allow me to save the same and gives the following error.
Serve was unable to process request--->ORA-02291:Integreity constarint (MDM_SYS_C0047065)-violated - parent key not found
Please help.

Hi,
I am creating a new version in DRM by using Copy to New feature but I am getting an error while saving that version.
The version gets created successfully but it does not allow me to save the same and gives the following error.
Serve was unable to process request--->ORA-02291:Integreity constarint (MDM_SYS_C0047065)-violated - parent key not found
Please help.

What are solutions to the "Unexpected error while attempting to bind. Operation cancelled." message when trying to bind

What are solutions to the "Unexpected error while attempting to bind. Operation cancelled." message when trying to bind and i alreeady cheack my DNS settings and everything

Has this worked before, or is this a new configuration?
On the server, launch Terminal.app from Applications > Utilities and post the output of the following harmless diagnostic command — and you'll need to enter an administrative password when requested:
sudo changeip -checkhostname
On the OS X (presumably) Mavericks client, please post the IP address(es) of the DNS server(s) you're referencing. These are available via the System Preferences > Network > Advanced > DNS settings.
To check the console logs, launch Console.app from Applications > Utilities on both the client and the server, and then attempt the binding, and then post a (short! no more than ~25 to 50 lines!) of any errors related to the binding error.
If you're not in a position to post configuration details here — which is perfectly reasonable, and entirely your prerogative — or if I'm getting too confusing or too technical with some of the questions here, which would be my error of course — then (assuming these systems are under warranty) I'd suggest contacting the folks at the local Apple Store and having a chat with the local Geniuses about this, or checking directly with the Apple Support folks via telephone.

Error while saving a version

Hi ,
I have susscefully restored and backed up a version but while saving the version in Target environment I get error like.
Error message:14090:cannot mark version 740 as deleted.it does not exist in repository.
Please advise.

The error message is The server returned an error processing the action:close job
Error message:DRM-14090:Cannot mark version 740 as deleted.it does not exist in repository.

Error while transfer data from SNP

Dears,
Am facing the below error while trying to transfer the data from DP .(SAPAPO/MC90
Thanks for the help

Hi Vijesh
You may start looking into the issue by checking whether all Product/Location mentioned in the seletion exists as CVC in MPOS. This should be followed by running a consistency checks through /SAPAPO/TS_LCM_CONS_CHECK. This previous post may be helpful - https://scn.sap.com/thread/654202.
Thanks,
Prasun

Error while invoking simulator

Hi,
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke: ; nested exception is:
dynamic invocation error: javax.xml.soap.SOAPException: Error parsing envelope: (1, 1) Start of root element expected.; nested exception is:
dynamic invocation error: javax.xml.soap.SOAPException: Error parsing envelope: (1, 1) Start of root element expected.</summary>
</part><part name="detail"><detail>dynamic invocation error: javax.xml.soap.SOAPException: Error parsing envelope: (1, 1) Start of root element expected.</detail>
</part></remoteFault>
I have received the following error while trying to invoke the simulator which is created instead of http call API. But I can see the instance of the simulator as passed. Can anyone help with this issue?

I hope the sun forum can help for me. Lets see

OBJECTS_NOT_FLATLIKE error while transfer data to a file .-

Hi experts,
I am getting a dump OBJECTS_NOT_FLATLIKE
while transfer data from internal table to a file .. File contains basically bank transmitting data in SAP
Appreciate your advise and help ...
Thanks

Hi,
1. If your files are on a remote File System, you will need to copy one of your files to the machine ODI Designer is running on to allow ODI to retrieve the metadata information of the file.
2. In Topology create a Physical Schema, the directory you enter for Data and Work Schema should point at this local file.
3. Then define the File Datastore in ODI Designer. Enter a name, browse and select the file and fill in each filed of the Files tab.
* If its a Fixed file, click on the grid icon on the Columns tab to enter the columns and have Automatic Adjustment checked.
* If its a Delimited file, use the Reverse button on the Columns tab to reverse the columns.
* Right click on the File Datastore select View Data, if you can view data, that means the File Datastore has been defined correctly.
* If not, check each tab of the File Datastore to make sure everything is defined correctly and retry.
4. Once View Data is successful, you now change the directories (Data and Work Schema in Topology) to point at the remote File System. These directories must be accessible to the ODI Agent that will be used to run the transformations. The directory can be an absolute path (m:/public/data/files) or relative to the ODI Agent startup directory (../demo/files). It is strongly advised to use a UNC (independent from the execution location) for the path. When running the transformations with "no agent", the directory is relative to the directory where Oracle Data Integrator has been installed.
You need to have a agent process running at the system where your source file resides .
Then while running the odi interface choose that agent .
Thanks,
Sutirtha

Discovery Failed: VNI-4026: Discovery failed: Error while transfer**URGENT*

Hi Fellows,
I had a server with one database only. It was discovered and running fine in OEM using Oracle Management Server. I created one more database in this server and created a service. Now I can see this database when I use OEM with stand alone option. But when I try OEM Oracle Management Server and I try to discover new database, it gives me the following error:
Discovery Failed: VNI-4026: Discovery failed: Error while transferring services.ora
I ping agent and it is okay. I checked the status of Listner which is fine too. If listner is not fine I should not be able to connect.
Note: the database which I already had on the server is working absolutely fine.
Any help will be highly appreciated.
Thanks
Ghulam Mustafa Butt

Hi,
I was out of office yesterday. Sorry for the link.
Here is the content of that link:
goal: How to confirm DNS hostname resolution
fact: Generic Platform
fix:
1. Find the hostname of the box:
     % hostname
2. Perform nslookup on hostname
     % nslookup <hostname>
     Type in the hostname exactly as it is displayed in step 1
     nslookup returns 4 or more lines of information in this format:
          Server: <hostname.domain of the dns server>
          Address: <ip address for the dns server>
          Name: <hostname.domain for this box>
          Address: <ip address for this box>
3. Perform nslookup on host IP address
     % nslookup <ip addr>
     Use the ip address found on the 4th line in step 2
     Exactly the same lines of info as in step 2 should be returned
4. Perform nslookup on host name of target system
     % nslookup <hostname>
     Exactly the same 4 lines should be returned as though nslookup were done on
the other box
5. Perform nslookup on IP address of target system
     % nslookup <ip addr>
     Exactly the same 4 lines should be returned as though nslookup were done on
the other box
NOTE ROLE:
The Network Administrator is responsible for adding servers to DNS

Getting an error while transfer the data SAP XI to SAP R/3

Hello Everyone,
I am getting an error
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
<SAP:P1>Error opening an RFC connection.</SAP:P1>
when i was transfing the data to SAP R/3.
But i found the error In SM59 , TCP IP connections ,
AI_DIRECTORY_JCOSERVER , AI_RUNTIME_JCOSERVER and SAPSLDAPI are failed to connect.
ERROR                program AI_DIRECTORY_SXI not registered
LOCATION             SAP-Gateway on host starxi / sapgw00
DETAIL               TP AI_DIRECTORY_SXI not registered
COMPONENT            SAP-Gateway
COUNTER              15736
MODULE               gwr3cpic.c
LINE                 1621
RETURN CODE          679
SUBRC                    0
RELEASE              640
TIME                 Sun Oct 12 16:23:18 2008
VERSION              2
How to register these program?
Can any one please help me.
Thanks
Subash.

Hi,
Check this XI Configuration guide:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
Also check this thread on XI installation and post-installation:
Re: XI INSTALLATION and POSTINSTALLATION
Regards,
Subhasha

Error while running Simulation Engine in Windows Vista

Hi All,
I installed Demantra 7.2 in Windows Vista. Everything works fine except Simulation Engine. When I Start Simulation Engine i get the following Error
Warning failed to create engine monitor - Class not registered.
Can anyone pls help me out with this.
regards,
Niranjan.G

Hello Ruby,
it's the right id, but the note isn't published (anymore). Below are the details.
best regards
Geert
Goal
Q1: When attempting to start Simulation Engine, getting "WARNING Failed to create engine monitor.
HRESULT=0x8004154 - Class not registered." EngineManager continues to run until "Executing the
shell...", after which it gets another error "ERROR Could not create callback COM object!
HRESULT=0x8004154 - Class not registered."
Users attempted to uninstall/reinstall but still have the same issue. How can this be fixed
Q2: Another question is, can these components be registered on an XP SP2 machine with IE 7 (Internet Explorer Version 7)?
Solution
A1: Please review the above information from the Demantra Analytical_Engine.pdf and see if it resolves
the problem - especially the information on pg 3, 46, and 50 regarding registering the analyical engine
manually. To save time, this information is posted below:
Demantra Analytical_Engine.pdf - states the following on pg 3:
Engine Modes
The Analytical Engine can run in two modes: batch and simulation.
• In batch mode, the Analytical Engine considers all the item-location
combinations and generates a forecast for all of them (with a few exceptions,
noted in the next chapter). In a typical implementation, the engine automatically
runs in batch mode regularly, perhaps after new data is imported.
• In simulation mode, the Analytical Engine considers only a subset of the
combinations. In this mode, the engine (called the Simulation Engine) waits for
simulation requests and then processes them.
In simulation mode, a user runs a worksheet and submits a simulation request for
some or all of the combinations in it. The simulation request is processed in the
background but generally fairly soon. When the simulation is done, Demantra
Spectrum alerts the user, who can then accept or reject the results.
In this mode, the user is usually performing a “what if” analysis. That is, he or she
has made some changes within the worksheet and then performs the simulation to
see whether those changes have the desired effect.
It is also possible to run simulations programmatically from within a workflow.
The Analytical Engine can run in only one mode at a time.
Demantra Analytical_Engine.pdf - states the following on pg 46:
Registering the Analytical Engine
The installer registers the Analytical Engine for you, but in case of problems, you can
register the engine manually. To do so, run the batch file Demantra_root/Demand
Planner/Analytical Engines/bin\RegEngine.bat.
If you have a license for the Distributed Engine, you can run the engine on multiple
machines. You do not need to install it on every machine; you need only to register it
on them. These machines must also be running the appropriate database client
software, so that they can communicate with the Demantra Spectrum database.
For information on choosing the machines to run the engine, see “Choosing Machines
to Run the Engine” on page 50.
Demantra Analytical_Engine.pdf - states the following on pg 50:
Choosing Machines to Run the Engine
If you have a license for the Distributed Engine, you can run the engine on multiple
machines; see “Registering the Analytical Engine” on page 46. If you do not have a
license for the Distributed Engine, Demantra Spectrum runs the Analytical Engine on
only one machine.
To choose the machines to run the engine
1. Click the button next to the Selected computers field, shown here.
The Engine Administrator displays the following screen - screen shot cannot be pasted in ITS
The left list shows the machines on which the Analytical Engine has been
installed. The right list shows the machines where the Analytical Engine will run.
2. Click the arrow buttons to move machine names to and from the right list.
3. Click OK.
A2: The Installation_Guide.pdf on pg 1 - 2 states that browsers should be Internet Explorer Version 5.5 or higher. But if version 7 does not appear to work properly for registering purposes, then use IE 6

Error while Transfer Object

Hi,
I have a Data-Transfer-Object which is transfered between a client and an EJB. While this transfer I get this exception:
java.rmi.MarshalException: CORBA MARSHAL 1398079699 Maybe; nested exception is:
org.omg.CORBA.MARSHAL: Unable to read value from underlying bridge : Mismatched serialization UIDs : Source (Rep. IDRMI:com.tsystems.ik.to.BANFTO:0000000000000000) = 0000000000000000 whereas Target (Rep. ID RMI:com.tsystems.ik.to.BANFTO:5F16928AAE9F82C6:70F941F18AA0F040) = 70F941F18AA0F040 vmcid: SUN minor code: 211 completed: Maybe
Any ideas, where the error is?
My DTO:
import java.io.Serializable;
public class BANFTO implements Serializable {
private String number;
private String name;
public BANFTO (){}
public String getName() {
return name;
public void setName(String name) {
this.name = name;
public String getNumber() {
return number;
public void setNumber(String number) {
this.number = number;

I had the same problem.
I deleted automatically generated deployment and RMIC code, did a rebuild all projects, deployed on server, restarted server and it just worked out.

Error While uploading Long Text for Operations in IA05 Transaction.

Dear Team,
Good Day.
While we are trying to upload the Long Text through BDC for IA05 operations the text is updating in Database but it is not visible in the long Text field. Is it possible to upload the long text through BDC or any bapi's which can be used for the same. Any configuration needed for this please do the needful.
Regards,
Bhanu.

Hi Bhanu
correct me if im wrong, the long text is a multiline text, its an object for text, this cant be filled with BDC since this object can not be created in background mode, so i think the bdc skip the routines to fill this object, you can use the save_text function right after the transaction ends
Regards
MC

Getting 507 error while Updating OS version

Hi Folks,
i am updating bb 8310 OS version 4.2.2.114 to 4.5.X.X. Now i have wipe my 8310 device, Now any body can tell me the proper step to update this os version?
i am trying to install 4.5.x.x version, but through Apploder but is is giving "The blackberry desktop software does not have BB device software for the device that you have connected to the computer,contact your wireless service provider or system administrator".
Plz help me out.

Thanks for all the advice, it all really makes sense. I tried it, however, and it still gave me the same error message the previous guy said he got that it was unable to reconnect to the device. I even tried it without the battery in there....
I have a 8830 World Edition
Still getting the 507 error
Must have tried reinstalling device software 30+ times...
PLease Help!!!
Have A Great Day!!

Error while transfer simulation version to operative.

Similar Messages

Maybe you are looking for