Error while transferring materials from R/3 to APO

I am getting an error while transferring materials from R/3 to APO , the error is on the SCM side and its "NOEXEC"  , the inbound queue has been blocked . what might be the problem

Hi Raj,
I think that you have RFC problems, you need to check this with your basis team, i give you a thread that talks about the same problem.
Regards.
Marí

Similar Messages

  • Fatal error while transferring data from one bb to another

    I was trying to transfer data from one bb to a different bb using the bb desktop manager tool.  It collected all the data from the first bb fine and then while transferring data to the new one it said a fatal error occured to try again.  That bb will not even turn on now.  No white screen or anything.  Its like there is no operating system.  I don't know what to do.  I tried to connect it and just update the software but that isnt working either.  Says it is not responding during initialization! I think I killed it.... any ideas what to do???

    You can try to reload the OS in one of the following ways
    http://www.blackberry.com/btsc/KB03485
    http://blackberryfaq.net/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Errors while replicating Materials from ECC to SRM

    Hi All,
    I am trying to replicate materials from R/3 to SRM, in SMQ2 of SRM, the status of MATERIAL is still in yellow colour. when i checked in SMW01 tcode, the error is "Category for material group 013 does not exist" where as in R/3 also we dont have any material group as 013.
    All the Prod type & Prod category have been replicated into SRM from R/3.
    And no materials have copied in SRM.
    how to resolve this ?
    regds,
    CB
    Edited by: Channabasappa.K on Feb 17, 2011 10:30 AM

    Hi,
    DNL_CUST_PROD0 & DNL_CUST_PROD1 were in green colour now,
    DNL_CUST_BASIS3 is in yellow colour & i saw in some doc that DNL_CUST_BASIS3 is not reqd from SRM7.0 onwards.
    when i try to replicate MATERIAL, in SMQ2 i am getting status as SYSFAIL & after double clicking on that i got a pop up as "Error in Mapping (Details: transaction SMW01)"
    Upon checking in SMW01 i got the above errors as
    " Category for material group 013 does not exist
    Message no. COM_PRODUCT_API002
    Diagnosis
    If material groups are used in the SAP system, they must exist as categories in CRM/EBP before you import materials. When Customizing object DNL_CUST_PROD1 is imported, the material groups are imported automatically and created in the category hierarchy R3MATCLASS (material group).
    Procedure
    Check whether the material groups have been imported successfully and exist as categories.
    Proceed
    If necessary, import the Customizing object DNL_CUST_PROD1"
    Like this its showing 19 material groups and all these 19 mat groups were not present in ECC.
    Regds,
    CB

  • Error while transferring Data from PSA to DSO

    Hi all,
    We had a requirement to load data into the DSO.We are extracting it from R3.
    Problem is that while loading in PSA it is showing 1056 records ,But when we are trying to load it in DSO it is showing Transferred records as 1428 and added records as 1073.Please help ASAP!!!!!!!!

    Hi,
    the difference in records can be due to some  changes happening in the transformation.
    check your transformation from the DS to your DSO if it contains any start,end or update routines oe any other such thing.
    Also check if there is one to one mapping from DS to DSO or if some fields in DS are not mapped to DSO.
    Regards,
    Dhanya

  • Error while transfering Datasource from R/3

    hi guys,
    I am trying to Transfer Datasource 0GENDER_TEXT from the RSA5. I am getting the Warning
    Application component PA-PA-IO of DataSource 0GENDER_TEXT does not exist
    When i try to Transfer Application hierarchy which is 
    above option to transfer datasources, i am getting the error
    Package Z_TRA doesnot exits
    R/3 4.7
    Bw  3.0 b
    Give suggestions what might went wrong
    Regards
    Ravi

    Hi Ravi,
    try to check if your 'package' is a valid one (it's like a development class for your transport request...maybe you have some problem with Z_TRA...)
    Hope it helps !
    Bye,
    Roberto

  • Getting Error while transfering projects from After effects to premier pro?

    Video Filter missing: AE.ADBE FreePin3
    This is the error i get when i try to export and open After Effects projects in to Premier? Im working with the puppet tool and i want to export my project to premier pro cs3 so i can further edit it there. Im using After Effects Cs3 and Premier Pro CS3? please help

    Well, does Premiere have a "Puppet Tool"? Absolutely not. Therefore how do you expect this feature to come over to PPro? Sorry, but that's simply impossible. You will have to render the project or use Dynamic Link from withing Premiere ("Import After Effects Composition), not the other way around.
    Mylenium

  • Error appearing while transferring products from CRM to R/3.

    Hi All,
    I am facing a problem in CRM system while transferring products from CRM to R/3. System is throwing a message "Exception condition NO_STRUCT_DEFINITION raised" and product transfer is not happening.
    Please suggest some solution.
    Thanks & regards,
    Rupam.

    Hi Arup,
    Thanks for your assistance once again.
    I have checked the 'CRMRFCPAR' table entries in R/3 system. One entry with 'Send XML=M' is present in that table.
    No error Bdoc exists in system, the existing Bdocs are showing as successfully processed in the transaction 'SMW01', The queue name corresponding to the Bdoc is 'CRM_PRODUCT_IP'.
    I have also checked the transaction 'GENSTATUS' .There is no object with status red, instead of that two objects are existing with green status.
    Can you please tell me how to verify, whether parent object ('DNL_CUST_PROD0') has been successfully loaded or not?????
    Eagerly waiting for your valuable suggetions.
    Thanks & regards,
    Rupam.
    Edited by: rupamsap on Mar 19, 2010 9:46 AM

  • Error in subroutine READ_NAMTB while transferring data from HCM to xRPM.

    Hi Guys,
    I am facing a problem while transferring data from HCM to xRPM via ALE.
    We are getting the error " Error in subroutine READ_NAMTB" during the Inbound Processing of Idocs in xRPM.
    We have used the standard message type HRMD_ABA and IDoc type HRMD_ABA04 without any modifications.
    Request you all to kindly let me know the solution to fix this issue asap.
    Thanks in advance,
    Punkuj..

    It was a bug in SP2, it is fixed in SP2 Patch 4.
    Cheers !!
    Zaheer

  • Commit error while transferring Sales order Document to GTS

    Hello,
    We faced a transfer error while transferring sales order document to GTS.
    When I debugged the code function /SAPSLL/API_6800_SYNCH is called. In this function, /SAPSLL/CUHD_MAINTAIN_SINGLE is called with parameter lv_no_commit = 'X'. When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.) In debug mode I set the value of lv_no_commit to space, and then it works. It creates the GTS document.
    We are also transferring billing documents and it works fine. When I checked what is the difference between transferring sales order document and transferring Billing document, I saw that in the transferring billing document there is another function is called /SAPSLL/API_6800_CSD_SYNCH, and it's calling parameters(in background, as seperate unit) are different from calling parameters of /SAPSLL/API_6800_SYNCH. You can see the difference below.
    For sales document transfer :
        CALL FUNCTION '/SAPSLL/API_6800_SYNCH'
          DESTINATION cs_transfer-rfc_dest
    For billing document transfer :
        CALL FUNCTION '/SAPSLL/API_6800_CSD_SYNCH'
          IN BACKGROUND TASK
          DESTINATION cs_transfer-rfc_dest
          AS SEPARATE UNIT
    So my question is, do you think is it a sap standard program error, or is there any suitable settings in the customizing or SM59 to fix this error?
    Thanks in advance
    Serhat
    Edited by: Serhat Dirihan on Jan 22, 2009 11:46 AM

    Dear Serhat,
    I don't think this is an RFC problem or an error. But you wrote:
    When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.)
    It is impossible to have GTS and R/3 on the same system and same client. At least the client should be different. So try to check why the call is performed like that.
    Balazs

  • Error while loading data from 0FI_TX_4 to ODS

    Dear Friends,
    One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
    Short dump is raised in R3 system.
    "DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
    "SAPLBWFIR" or "LBWFIRU13"
    "BWFIR_READ_BSET_CPUDT_DATA"
    ORA-01555
    The number of records are below 10000 only.
    All other chains are OK.
    we have already searched SDN and Notes...and applied below solution, but still no use
    Increase the size of all the roll back segments
    Increase number of REDO logs
    Decrease the number of records per data packet
    Any more suggessions please ??
    Thanks
    Tony

    How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
    Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
    I know you have read so many threads on the  same but what I am suggesting is what I have done and successfully rectified this issue.
    regards,
    rocks

  • Error while creating subsite from site template

    Hi,
    I am getting below error while creating subsite from existing site template .
    Sachin Bhosale

    There must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
    to the following blog post for more information
    http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
    http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
    Cheers,

  • Error while updating data from PSA to ODS

    Hi Sap Gurus,
    I am facing the error while updating data from PSA to ODS in BI 7.0
    The exact error message is:
    The argument 'TBD' cannot be interpreted as a number
    The error was triggered at the following point in the program:
    GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
    Please suggest how to proceed on this issue.
    Points will be awarded.

    Hi ,
    Try to simulate the process.That can give you exact error location.
    It seems like while updating few records may be no in the format of the field in which it is updated.
    Regards
    Rahul Bindroo

  • Error while selecting date from external table

    Hello all,
    I am getting the follwing error while selecting data from external table. Any idea why?
    SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
      2        SE_CUST_ID NUMBER(38),
      3        SE_TRAN_AMT_LCY FLOAT(126),
      4        SE_REVERSAL_MARKER VARCHAR2(255))
      5  ORGANIZATION EXTERNAL (
      6    TYPE ORACLE_LOADER
      7    DEFAULT DIRECTORY ext_tables
      8    ACCESS PARAMETERS (
      9      RECORDS DELIMITED BY NEWLINE
    10      FIELDS TERMINATED BY ','
    11      MISSING FIELD VALUES ARE NULL
    12      (
    13        country_code      CHAR(5),
    14        country_name      CHAR(50),
    15        country_language  CHAR(50)
    16      )
    17    )
    18    LOCATION ('SE2.csv')
    19  )
    20  PARALLEL 5
    21  REJECT LIMIT UNLIMITED;
    Table created.
    SQL> select * from se2_ext;
    SQL> select count(*) from se2_ext;
    select count(*) from se2_ext
    ERROR at line 1:
    ORA-29913: error in executing ODCIEXTTABLEOPEN callout
    ORA-29400: data cartridge error
    KUP-04043: table column not found in external source: SE_REF_NO
    ORA-06512: at "SYS.ORACLE_LOADER", line 19

    It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
    HTH -- Mark D Powell --

  • DB Connect Load - "Unknow error while uploading data from the DB Table"

    Hi Experts,
    We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
    I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
    At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
    Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
    Please advice.
    Thanks,
    Abhijit

    Hi,
    Sorry for bumping an old thread ....
    Did this issue get ever get resolved?
    I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
    One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
    I get "Unknown Error" whenever I trigger the data package.
    Advait

  • Failed to commit objects to server. Error while publishing reports from BW

    Hi,
    I am getting below error while publishing reports from BW to BO.
    "0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
    Anyone having any solution for this. Thanks in advance.

    Hi Amit
    It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
    Thank you:-)

Maybe you are looking for