Error while transferring Plants to TM system from ECC

Hi Experts,
I am getting below error message that Location (Plant) already exist in target system with Outbound queue blocked status while in target system plant does not exist physically in CFM2 Tcode.
Please advise if any RFC settings are missing in both ECC, TM system.
Regards,
Shakti

Hi Bimal,
Thanks for the reply, I have 3022 shipping point available in TM transferred earlier, but system should consider the same number 3022 configured as plant for shipping point. I guess this is a standard behavior which need to be resolved using BADI.
Kindly suggest if you know any BADIs for this issue.
Thanks,
Shakti

Similar Messages

Error while exporting/transporting the Business system from Dev to Quality

Hi,
We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
404 Not Found
The requested resource does not exist.
Details: Go to main page of this application!
We have followed the following procedure to export :
1. opened the business system.
2. Clicked on export option
3. tried to download
then we got the above error message.
Please provide your precious inputs to resove our problem.
Thanks
Ramesh

Go through the following links for transporting XI objects.
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
ere's a good link for what you are looking.
Re: Transport design and configuration objects
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Pls reward if useful

Getting error while try to open SAP system from GUI

Hi All,
When I try to open any SAP system from GUI I am getting below dump error message. Please suggest on this.
Thanks & Regards
Surender

Hi Surender,
Is it a general user issue or are you the only user facing that issue ? Does the error occur right after you enter user/password ?
From the GUI session status bar, I see " Memory Low. leave the transaction before taking a break".
This looks like a improper memory configured system. I would suggest that you review your memory parameters as per the SAP note 146289.
If you already have the memory parameters set to at least the values suggested by that note, please further increase the parameters below:
abap/heap_area_total
abap/heap_area_dia
Hope that helps.
Kind regards,
Eric

Error while transferring materials from R/3 to APO

I am getting an error while transferring materials from R/3 to APO , the error is on the SCM side and its "NOEXEC" , the inbound queue has been blocked . what might be the problem

Hi Raj,
I think that you have RFC problems, you need to check this with your basis team, i give you a thread that talks about the same problem.
Regards.
Marí

Commit error while transferring Sales order Document to GTS

Hello,
We faced a transfer error while transferring sales order document to GTS.
When I debugged the code function /SAPSLL/API_6800_SYNCH is called. In this function, /SAPSLL/CUHD_MAINTAIN_SINGLE is called with parameter lv_no_commit = 'X'. When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.) In debug mode I set the value of lv_no_commit to space, and then it works. It creates the GTS document.
We are also transferring billing documents and it works fine. When I checked what is the difference between transferring sales order document and transferring Billing document, I saw that in the transferring billing document there is another function is called /SAPSLL/API_6800_CSD_SYNCH, and it's calling parameters(in background, as seperate unit) are different from calling parameters of /SAPSLL/API_6800_SYNCH. You can see the difference below.
For sales document transfer :
    CALL FUNCTION '/SAPSLL/API_6800_SYNCH'
      DESTINATION cs_transfer-rfc_dest
For billing document transfer :
    CALL FUNCTION '/SAPSLL/API_6800_CSD_SYNCH'
      IN BACKGROUND TASK
      DESTINATION cs_transfer-rfc_dest
      AS SEPARATE UNIT
So my question is, do you think is it a sap standard program error, or is there any suitable settings in the customizing or SM59 to fix this error?
Thanks in advance
Serhat
Edited by: Serhat Dirihan on Jan 22, 2009 11:46 AM

Dear Serhat,
I don't think this is an RFC problem or an error. But you wrote:
When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.)
It is impossible to have GTS and R/3 on the same system and same client. At least the client should be different. So try to check why the call is performed like that.
Balazs

Error while processing message to remote system

Hi,
I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
The previous thread relating this is:
Process Integration (PI) & SOA Middleware
Requesting for a solution.
Regards,
Raghavendra

Hi,
>>>So i tried creating a RFC(using sm59)in the R/3,
When i try to import the RFC i have created, I am not able to see the one i have created.
In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
This will enable your RFC to be called by an application outside the R/3 system.
>>>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.
You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
You are not able to find your RFC since it has not been remotely enabled or has not been activated.
Regards,
Smitha.

Error while transferring Forwarding settlement document to ERP Billing

Hi Experts,
My forwarding settlement document is consistent.
All the basic customizing in SAP ERP, TM has been completed as follows, but getting error while transferring forwarding settlement document to ERP billing (Ref. 1st screenshot).
I am using SAVE AND TRANSFER button to send the document to ERP, also same error is displaying while using PREVIEW INVOICE button (Ref.2nd screenshot)
Please suggest if I missed anything to send forwarding settlement document to ERP.
Customizing settings for transferring Forwarding settlement document to SAP ERP.
1. In SD Billing all condition types has been maintained, pricing procedure determination configured.
2. In SAP ERP SD condition types mapped to TM charge types using following path.
Integration with other sap components - Transportation management - Invoice integration - Billing - Definition for transportation charge elements - Define charge types.
3. Assignment of charge types in ERPSD
4. Define charge category, subcategory codes
5. Mapped ERP SD, TM sales organization with logical TM system, sales area, Order type, Billing type, Pricing procedure
6. Output types determination configured for ERP Billing in SD

Dear Serhat,
I don't think this is an RFC problem or an error. But you wrote:
When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.)
It is impossible to have GTS and R/3 on the same system and same client. At least the client should be different. So try to check why the call is performed like that.
Balazs

The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.

Last night, some of our systems installed updates released on 11/13/2014.
KB3021674
KB2901983
KB3023266
KB3014029
KB3022777
KB3020388
KB890830
Today, all of the servers running Windows Server 2008 R2 started logging the following error in the Security log over and over:
Log Name:      Security
Source:        Microsoft-Windows-Eventlog
Date:          1/15/2015 11:12:39 AM
Event ID:      1108
Task Category: Event processing
Level:         Error
Keywords:      Audit Success
User:          N/A
Description:
The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.
Servers running Windows Server 2008 that also installed the updates are not experiencing the problem. It looks like one of the updates may have introduced this problem with Server 2008 R2.

...Did you for sure confirm that:
https://technet.microsoft.com/library/security/MS15-001
is the cause?
I did. I had a VM that was not experiencing the problem. I took a snapshot and tested the patches one by one. Installing only KB3023266 immediately caused the issue to occur (after reboot). A similar process was used to confirm that
installing KB2675611 resolved the problem.
Note that I found the installation of KB2675611 is usually quick, but it took several hours hours to install on some of our systems. We had installed this patch a few months ago on a couple of servers and it was always quick to install. But,
it seems like installing it on a symptomatic system can cause it to take a long time.

Error while accessing menus in Runtime workbench from SLD

Hi I am getting following error while accessing menus in runtime workbench from SLD.( example: SLD->runtime workbench->component monitorung ->display)
"Error during communication with System Landscape Directory: User credentials are invalid or user is denied access "
I am using PISUPER to login to SLD and i am able to login to XI using this ID. I could find role -SAP_XI_RWB_SERV_USER - also in the user id profile of PISUPER.

Hi Karthik,
Check if the roles are generated. Or ask your basis team to check.
IF the roles are generated then you have to check if exchange profile if the right username is mentioned or not. IF username is right then reenter the password.
Check the following parameter in exchange profile.
com.sap.aii.rwb.serviceuser.name
com.sap.aii.rwb.serviceuser.pwd
Regards,
Sumit
Edited by: Sumit Khetawat on Dec 28, 2007 11:52 AM

Error while importing music in iMovie 11 From itunes 10

Error while importing music in iMovie 11
I have the same error explained in a other post which was still left unanswered
I have this sound problem after reorganising folders by itunes, i tried to delete al files in itunes and also
deleted the xml file in the itunes dir, created new playlists, but still i have no music sound in imovie timeline
after dragging a mp3 into it. When i preview the file in imovie it souds ok.
Also i see the red dot with the number 1 in the itunes logo while dragging the mp3.
Is there a solution for this problem?
Former post;
Re: Error while importing music in iMovie 09 from iTunes 09
Posted: Jul 24, 2010 8:08 AM in response to: vincentplaces
I'm having the exact same issue, but still haven't figured out what it is. I note that at the top of this thread it indicates that there are two "helpful" entries and one "solved" entry, but I can't find the solved one, so maybe someone will repost it here or kindly link to it.
There is one icon missing though.
As I read through the excellent tutorial at http://www.kenstone.net/fcphomepage/imovie_09stone.html I scroll down to the point where he talks about dragging music in from iTunes, which is what I'm trying to do. I can see, in his screen shot, the extra little icon that is a red oval and a white "1" in it. I don't get that icon when I am trying to drag my music into the video. I do get the green and white plus icon when I try to drag my music in. Also I DO get BOTH the red 1 and the green plus when I try dragging in a sound effect, which I can do with no problem. But why not the music?
I've been able to drag in music with no problem in other productions, so I can't figure out what is going on with this one. I'm sure there is a setting somewhere that got flipped, but I can't figure out where.
In desperation I also tried adding an extra title slide at the end of my video just to make sure there is more video time than music time in the production, but that didn't help at all.
Any help guys?
iMac 27" Mac OS X (10.6.4)

Hi
Due to some kind of copy protection in iTunes - I don't copy directly from this in iMovie
to my projects. (Most often the result of doing it in iMovie is a DVD without any sound)
I do
• In iTunes - collect needed audio into a new Playlist
• then burn this out as an Audio-CD .aiff (NOT .mp3)
• This CD I copy into a folder on my Mac (often containing other material that's connected to the project)
• And then I drag and drop these .aiff files into my movie project in iMovie.
This works Greatly and even more so when I do my DVD.
Yours Bengt W

APEX 4.0: error while opening a XLS file downloaded from interactive report

Hi,
I'm getting below error while opening a XLS file downloaded from an interactive report (APEX 4.0).
"The file you trying to open, 'customer_2.xls', is in a different format than specified by the file extension.
Verify that the is not corrupted and is from a trusted source before opening file. Do you want to open file."
Yes No Help
May be this one Apex 4.0 issue.
please help me.
Thanks
Mukesh

Hi,
is the next part of the code correct.
What i mean is packing of the attachment, finding out the size of pdf file and doc type as PDF.
You can also try below link..
Link: [http://wiki.sdn.sap.com/wiki/display/Snippets/SENDALVGRIDASPDFATTACHMENTTOSAPINBOXUSINGCLASSES]
Hope this helps.
Regards,
-Sandeep

File to RFC - error while processing message to remote system:com.sap.aii.

Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.

Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek

Error while reading PO in backend system Inform system adiministrator

Hi All,
I am working on extended classic scenario and the problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" and this is happening only for a particular local PO.
When I check the PO number in R/3 it does not exist.
The number range is correct both in SRM and R/3 (external no. range is ticked).
Also I could not find any logs in RZ20 nor a dump.
When I checked in bbp_pd, couldnt find any relevant information except that the PO has the status ordered.
I am on SRM version BBPCRM 4.0 SAPKU40007
R/3 version 4.6 C SAPKH46C47
Thanks in advance,
Rgrds,
Raj
Message was edited by:
Raj Malhotra

Hi
Have you tried out this ?
There are two BADIs which might help you in achieving the job.
BBP_EXTLOCALPO_BADI [Control Extended Classic Scenario ]
and
BBP_GROUP_LOC_PO
[Exit Grouping of Items for Local Purchase Orders]
Read the documenatation first, using transaction - SE18
before implementing them for your requirement.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Error while importing music in iMovie 09 from iTunes 10

I have the same error explained in a other post which was still left unanswered
I have this sound problem after reorganising folders by itunes, i tried to delete al files in itunes and also
deleted the xml file in the itunes dir, created new playlists, but still i have no music sound in imovie timeline
after dragging a mp3 into it. When i preview the file in imovie it souds ok.
Also i see the red dot with the number 1 in the itunes logo while dragging the mp3.
Is there a solution for this problem?
Former post;
Re: Error while importing music in iMovie 09 from iTunes 09
Posted: Jul 24, 2010 8:08 AM in response to: vincentplaces
I'm having the exact same issue, but still haven't figured out what it is. I note that at the top of this thread it indicates that there are two "helpful" entries and one "solved" entry, but I can't find the solved one, so maybe someone will repost it here or kindly link to it.
There is one icon missing though.
As I read through the excellent tutorial at http://www.kenstone.net/fcphomepage/imovie_09stone.html I scroll down to the point where he talks about dragging music in from iTunes, which is what I'm trying to do. I can see, in his screen shot, the extra little icon that is a red oval and a white "1" in it. I don't get that icon when I am trying to drag my music into the video. I do get the green and white plus icon when I try to drag my music in. Also I DO get BOTH the red 1 and the green plus when I try dragging in a sound effect, which I can do with no problem. But why not the music?
I've been able to drag in music with no problem in other productions, so I can't figure out what is going on with this one. I'm sure there is a setting somewhere that got flipped, but I can't figure out where.
In desperation I also tried adding an extra title slide at the end of my video just to make sure there is more video time than music time in the production, but that didn't help at all.
Any help guys?
iMac 27" Mac OS X (10.6.4)

Made a mistake in the title, version of imovie is 11

Error while installing Mini SAP Basis system 4.6D test suite

Hi Gurus,
I am getting error while installing Mini SAP Basis system 4.6D test suite on my laptop. I trying to install this version under Windows Xp. I tried so many times to rectify this error but no use. i followed the instruction in the readme file.The error is below in quote.
"InstController MakeStepsDeliver:108 connection to GUI of installation tool has been cut off.Installation has been stopped."
your help very much appreciated...
Regards
dinesh.a

is win xp supported for mini sap 46d?
-> try netweaver 2004s instead ...
GreetZ, AH

Error while transferring Plants to TM system from ECC

Similar Messages

Maybe you are looking for