Error while transferring the Shopping cart to ECC system

Hi,
I am getting the below error in classic scenario, while trying to transfer the shopping cart created in SRM (v 4.0) system to ECC (v5.0) system.
"06313 Material differs from material & from t he info record"
I have a valid inforecord in ECC for the material and vendor entered in shopping cart.
Please help me to find out what could be the problem.
Thanks & Regards,
Arun

Hi Arun,
Its difficult to tell what is the issue exactly with the information provided by you but neverthless check the following observations :
1. Did you refer the correct info. record while creating shopping cart for that item ?
2. Check for the detailed description of error in Application Monitor using RZ20 txn. and also in SLG1 for any error logs.
Also check in BBP_PD for the status.
3. Also try to craete a P.R and P.O in R/3 for that material by referring that info record. This is one of the best ways of trouble shooting as you can nail down the issue thats causing this error.
Please check for the above observations and get back to us for further help.
Award points for helpful answers.
Rgds,
Teja

Similar Messages

Getting error while creating the Shopping cart.

Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
Dev

Try the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears.

Error while raising the shopping cart.

Hi experts,
Can any one tell me, I get an error message at the time of raising a SC,
The error is
Partner 22452 not found with with partner function type goods recipent.
Account 54102022 requires an assignment to an CO object
No address found for partner type goods recipient.
I have checked users consistency he is fine, I checked all the attributes they were fine.
So where could be problem? can any one suggest?
Best Regards,
Sairam

Hi Sai,
The issue below is a perfect example of the BP being insconsistent or his Company BP being inconsistent. what version of SRM?? If you are on SRM 4.0, you can use the repairl of level 2 feature and fix this issue.
Partner 22452 not found with with partner function type goods recipent.
The BP you logged in with should have an employee role in BP. This is different from the regular role in PFCG. I am poiting at the Role in BP from transaction BP.
Account 54102022 requires an assignment to an CO object
This is a data error. You need to populate valid account assignment in the account assignment tab.
No address found for partner type goods recipient.
Same as the first error. Your BP is corrupted.
Hope this helps !
Pls assign points for usefull answers !
Sundeep

Error while creating the shopping card E BBP_PD 047 Venture 199330

Hi,
While creating the shopping cart and posting the invoice we are facing the error message like "E BBP_PD 047 Venture 199330 is not active".
This error is happening in production system but it's not giving any error in quality system. Quality system is working fine.
Kindly tell me any one what is the reason for this kind of error.
Regards,
Senthil.
Points will be rewareded.

Hi Senthil,
It is custom error message. however what is venture 199330 - is it account data in your shopping card. check it up if what is venture ? hope that it is some thing on finacial term like fund center, cost centre. check it up with your business team.
regards
Muthu

SAP XI 3.0 - Error while reading the ID of own business system from the SLD

Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while transferring the document

Hi Friends,
We are getting an Error when we try to create a service confirmation.The error is an 'Error has occurred while transferring the document'.When we see in the transmission log it is telling inconsistent update flags.
How can the error be removed?
Regards,
Jay.

Hi Jay,
Try doing this once again and go to Tcode SMW01 and try to locate your Bdoc. First it will be in yellow state and it will turn red (error).
Once you get the error Bdoc, check the error messages in it (there is proper button on the top to get this). You might get the cuase of the error in Bdoc messages itself.
If not, post me the Bdoc status and the Flow Context.
Regards,
Alin

Price Field Changeable while creating the Shopping cart

Hi We are in SRM 4.0 and follow a classic scenarios.
For some materials we run program EBP_GET_BACKEND_PRICES
and get the prices from the backend, how ever while creating a shopping cart if the price differs we need to change the price but the field is grey.
how do we change the price ????
EX - My MAP in R/3 for Material A is 100 Rs. how ever while I create a shopping cart the price i need to enter is 102 how do I change the price.
can anyone throw light on this.
regards,
Nimish Sheth

Nimish,
for this you have to change the standard code.
In screen communication structures, there is a flag "price_changeable" that controls the edit mode of price field.
You have to change the standard logic to implement your behaviour in FORM price_changable_set from include LBBP_SC_APPF92:
IF es_item-mode EQ gc_display OR
    ( es_item-rfq_ind EQ gc_yes AND es_item-price IS INITIAL ).
    CLEAR: es_item-price_changeable.
ELSE.
    IF NOT es_item-catalogid IS INITIAL OR
       es_item-price_origin EQ c_price_origin_f OR
       iv_scenario EQ c_sc_generic_soco OR
       iv_scenario EQ c_sc_generic_history OR
       iv_scenario EQ c_sc_generic_workload OR
       ( es_item-price NE es_item-gross_price AND
         NOT es_item-price IS INITIAL ).
      CLEAR: es_item-price_changeable.
    ELSE.
      es_item-price_changeable = gc_yes.
    ENDIF.
ENDIF.
Rgds
Christophe

Error while posting the parked document in ECC 6.0

Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.

Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks.

UOM error while creation of Shopping cart.

Hi guys,
Can any one help me?
I have a problem with UOM as PCE = piece, The UOM is already there in the SRM and found that the same is not there in my backend system.
So now I have maintained the UOM in the backend system also with that of same in the SRM system. with following attributes.
Internal measurement unit as PCE
Commercial name = PCE
Technical name = PCE
ISO code = PCE
in application paramentes I have checked the the box commercial measure ment unit.
I mean I have maintained the same as that of in SRM.
Now when I tried to create a shopping cart and approved it. it shows as error in process UOM not defined in the backend system. Is it so the same ISO code has been assigned for more than 2 UOMs?
Please suggest how to resolve this? also Do I need to tick the primary code box also?
Best Regards,
Sairam.

Hello Laurent,
Thanks for your reply, But let me explain you, The UOM PCE = piece is existing in the SRM right from the beginning , which has not corresponding UOM maintained in the backend system.
So now I simply maintained all the attributes of UOM, same like in the SRM.
By simply ticking the Primary code will this solve my problem? or, shall I really have download the UOM through R3AS from backend to SRM?
Can you please suggest?
Best Regards,
Sairam.

Error while transfering the data from local to master repository

Hi , Iam Working on SAP Learning Solution Implementation,we are using LSOAE200 as a Authoring Tool. When i am Transfering the Learning Net from the authoring tool to the master repository which is in portal, I am facing the following error:
Type=E, ID=NR, Number=751, Parameter='', Message='For object , number range interval does not exist'
com.sap.hcm.ls.shared.datamodel.ebo.EBOCatalogException: Type=E, ID=NR, Number=751, Parameter='', Message='For object , number range interval does not exist
we are able to make it out that the error is something which is not able to find the number ranges in R/3. Can any one of you please suggest me where exactly to create the number ranges in R/3.
Regards..
Kishore

Hi,
Please check table T77IV and see whether you haver assigned a number range for the object you want to transfer the data.
Please let me know in case you require any further clarifications.
With Regards,
Kaustuv Goswami.

Error while downloading the object u201CDNL_CUST_PROD0u201D from ECC to CRM

Hi All,
I am trying to download the object u201CDNL_CUST_PROD0u201D from ECC to CRM. However it ended up throwng an error. Below are the error details:
The following Errors/Warnings occured. Do you want to continue?
Please read the OSS Note no. 212666 (QUEUE_ALREADY_EXITS:R3AI_DNL_CUST_PROD0)*
DNL_CUST_PROD0: Object will not be loaded
After getting the above error I deleted the already running instance and again ran it. But when I again ran it, it gave me the same error. So I checked for the entries in Outbound queue of ECC system. But couldnt found any entry.
Please help me fixing the issue.
Thanks in Advance.
Cheers,
Rj

Hello RJ,
Check CRM I /B and O / B (txn:SMQ2 and SMQ1) and also R/3 I /B and O / B queue, for the presence of
R3AI_DNL_CUST_PROD*.
Also, abort the running load in txn:R3AM1 for object DNL_CUST_PROD0.
Then try to re-load the object.
I do not see any other reasons for the above error message.
Best Regards,
Shanthala Kudva.

Error while creation of shopping carts

Hi
Can anyone help me with the following problem.
Error in price at the time of creating SHC fro catalogue item
mentioned below article no. 0452202 then a pallet is to cost 3275,05 (you can only order min. 10 pallets).
The system multiplies up the price by 10 & 10 and at that moment I transfer the shopping trolley it multiplies up again.
The price for 10 pallets was gladly to be 32720,50 - Buttttttttttttt it turns into 3.272.050.
Please help me in providing a solution for this
Best Regards,
Sairam

Hi
Please go through this ->
Note 739562 Simplified pricing: Price 0.00 if catalog item.
This is the standard system response as of EBP 3.5 Support Package 05 or Note 569275.
This also depends on how you uploaded the price in the catalogs ->
For price details you should use the following characteristics:-
/ccm/price[1]#/ccm/amount /ccm/price[1]#/ccm/currency_code
Perhaps you have to maintain field pricechangeable in BADi-InterfaceIF_EX_BBP_CATALOG_TRANSFER in method - ENRICH_ITEM_DATA. This will make sure you can edit the price_
Other useful pointers ->
Re: Price determination
Re: free item shopping from catalogue....product with zero price
OSS note 550071 - price for catalog product
How to Upload Price details for a catalog in CCM 2.0
Do let me know.
Regards
- Atul

Error while creating a shopping cart

Hi,
The user is getting an error 'No address found for partner function type requester".
However when I checked the user address in BP transaction, user is having address.
Can anybody help me how to find the solution for this?
Rgds
Prakash

Hi,
In BP transaction, click on "Relationships" button. It will appear the companies that user is an employee. Click on these companies and check if a message like "Person - address combination doesn't exist". If so, the following notes could help you to repair this BP:
836353 - Correction Report for inconsistencies in BUT052/ADCP tables
842768 - Partner cannot be deleted due to relationship address
846390 - AM-885 Relationship address cannot be assigned
Kind regards,
Ricardo

Error while Replicating the Data Source in Quality System....

Dear Expert,
I have created a generic data source in R/3 Dev system and I replicated the data source to BW DEV system. Everything is fine in DEV system.
I have transported the Data Source to R/3 Quality System. And transported the related objects in BW DEV system to BW QUALITY system.
Now I am getting the error as follows :
BW QUA System --> RSA1 --> Source System --> Data source Overview --> Sales & Distribution --> _REPLICATE_
*DATASOURCE*.( clicked )
Its moving to another screen (R/3 QUALITY) , but it is coming as a LOGIN screen. Its askong for the USER name and Password. And when I click on BACK button , its givin following pop-up
RFC connection to source system LOGSYS is damaged ==> no Metadata upload
What could be the issue ?? Please suggest.
Thanks,
Sanjana

Hi saveen,
Yes I transported in that manner.
I checked in Source System ( RSA13):
Its giveng the pop-up ,
RFC connection check failed. Check connection
Please suggest, how can I proceed ?
Thanks,
Sanjana

Error while transferring the Shopping cart to ECC system

Similar Messages

Maybe you are looking for