Error while transferring Vendor master from R/3 to SRM

Hi,
I have done the following.
R/3 .
1. Vendor creation in Xk03 for the organisation
SRM.
1.Created a vendor group in PPOCV_BBP
Entered the following in BBPGETVD.
1. Logical system
2.Vendor
3.Purchase organisation.
4. tice mark in address comparion,
5. Organisation ID: 50000407 for the Vendor group created in PPOCV_BBP.
6. only Transfer R/3 Number
7. Executed ..
Error is I am getting the following error. while using BBPGETVD .
"None of the purchasing organisation in org Structure"
Please give your solution
Regards
G.Ganesh Kumar

Hello Ganesh,
I did not talk about tab Attributs.
In PPOSA_BBP, one of your Organizational Unit must have in its tab Functions value 'Purch. Organization' set with correspondence in R/3 values (number and logical system).
Regards.
Laurent.

Similar Messages

CIF Error while transferring vendor

We are facing CIF error while transferring vendor master to APO.
The issue is in e-mail address of the vendor master.
One way is to correct the e-mail addresses - one per line without semicolon at the end.
But the issue list is very huge to get it corrected.
Is there any other way by which we can exculde the e-mail addresses or its validation?
Thanks and regards,
Sushant

Hi Senthil,
The objective was to avoid CIF error due to incorrect address setup. This required us bypass it before data transfer. We could fix this using enhancement in ECC.
Apreciate your kind reply, though. Thanks a lot.
Warm regards,
Sushant

Error while Importing Vendor Master records

I get the following error when importing vendor Master records into the MDM repositorry
Cannot import qualifiers because the qualified lookup field is not mapped.
I noticed that the file I'm importing contains 1000 vendors. However the qualified lookup table "PHONE" for the vendors contain only 388 records.
After I imported the records I found that there was only 389 records in the repository.
I'm using standard map provided by SAP.
I ran the import again but this time I unmapped all fields for the qualified update.
Now the Import Manager uploaded the remaining 613 records.
I would like to know whether how I can load 1000 records in one load rather than having to go through the file twice.
This is important since I want to use the import manager server for my loads.
Thanks
manoj

Hi Manoj,
Try the following options.
1. In the Import Manager, Select Configuration->Options
set "Merge qualified links using matching qualifiers value to Off"
2. In the Map Fields/Values tab in Import manager, select the qualified field in which you are trying to import, right clik on the field->select Set Qualified Update -> Update -> Select All available qualifiers into Matching qualifiers->
New Links- Create
Existing Links -> Update (All Mapped Qualifiers).
Hope this should solve your problem.
Thanks and Regards
Subbu.

Error while replicating vendor master data from R3 to SRM

Hi,
I am trying to replicate Vendor master data from the R3 system to SRM system(7.0) for the first time and am facing the following error :
Organizational unit 50000004 does not exist; check entries
Message no. BBP_BUPA034
I have gone through the other posts with similar issues but haven't been able to find a solution.
Any ideas?
Thank you.

hi sahlini
did you create a vendor organisation structure via PPOCV_BBP ? SINCE YOU REFER THIS NUMBER 50000004 WHAT IS THIS?
BR
\MUTHU

Error while transferring Purchase Order from ECC to SUS

we are working on plan driven procurement and transferring the PO from ECC to SUS, we are getting the error as "No partner found for partner number ECCSUS8".
In ECC the Vendor No is ECCSUS8, trasfered vendor from ECC to SUS. Vendor registration is done based on the mail generated and vendor login is created in the portal and assigned the roles.

Hi
Are you facing this error in PO transmission to SUS (as you mentioned below)? or you are facing this error while sending out the vendors from R/3 to SUS from BD14?
If you are facing this in vendor transmission, you need to remove the tick (flag) "Use self reg component" in SPRO-SRM server-Supplier Self-ServicesMaster DataMake Settings for Business Partners. Then you can transmit the vendors from R/3 succesfully.
If this error is in PO transmission, need to analyse further.
Pls do let me know.
Thanks
Kiran

Run time error while create Vendor master via MK01

Dear Experts,
when i try to create vendor master by MK01.....system throws run time error as below:
"The exception 'CX_BADI_MULTIPLY_IMPLEMENTED' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CVI_MAP_TITLE=================CP' has to be
terminated."
My current system is ECC 6 along with DBM. Business partner configuration is activated in the current system. I am getting this error after BP configuration. Could you please help me to fix this issue?.......Is it due to configuration or a dump from abap program?
Regards
Vetrivelan

Hii,
please search sdn before posting the threads.
check these links, it may help u............
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
CX_BADI_NOT_IMPLEMENTED
thanks.

ERROR -WHILE LOADING MATERIAL MASTER FROM A FLAT FILE

HI GUYS ,
I AM TRYING TO CREATE MATERIAL MASTER FROM A FROM FLAT FILE
IAM GETTIGN AN ERROR MESSAGE
'YOU HAVE NOT FULLY MAINTAINED THE DESCRIPTIONS'
REQUIRE HELP ON THIS
THANKS

Hello Nishant
All the inputs that are required to create a material in dialog (MM01) should be mandatory as well if you are going for LSMW or BAPI. Obviously your material requires a description (which will end up in MAKT). If you have this description in your flat file then there are additional (perhaps language-dependent) descriptions required.
You could try to use BAPI_MATERIAL_SAVEDATA in your test environment to find out the minimum input that is required to create a material in R/3.
You may also have a look at thread what are the parameters have to pass to bapi material creation?
Regards
Uwe

Error while creating vendor master (xk01)

i am trying to create a vendor master in t.code
xk01, using standard objects, ie company code
R300, purchasing org- R300, account group---LIEF.
In address screen, i entered country as US,
system is giving an error
*Communication error with the external tax system (VERTEX_MS0018)
Message no. TAX_TXJCD864*
pls give me a solution as soon as possible.
rewards assured.

Dear Pavan,
Check the input tax settings have been done in your tax procedure with related to the country US.
I hope it will help you
Regards,
Murali.

Error while extracting Vendor Data from R/3 system

Hi all,
I am trying to extract vendor data from R/3(ECC6.0) system to XI using Tcode MDM_CLNT_EXTR.
already I have maintained partner profile for the same.
I have given the necessary details like Creditor_extract,Target System and Distribution Mode as initial load.asusaully extraction process started and I found error in log file like"Table MASTER_IDOC_DATA is empty". Please help me if anyboday have idea about this.
Thanks in Advance,
Ravi.

Hi Ravi,
you've got to set up the message type MDMRECEIPT for the Idoc distribution from R/3 to XI. Check chapter 5.2 in the IT configuration guide available on <a href="http://service.sap.com/installmdm">MDM Documentation Center</a>. It describes the necessary steps.
BR Michael

Error while creating vendor master data via ALE

Dear All
I am trying to create vendor master data via ALE.
I am using message type CREMAS.
I get following error message in inbound system
No batch input data for screen SAPMF02K 0610
Message no. 00344
If i try to manually create vendor , there is no error. This particular screen belong to withholding tax, however all customizing settings for withholding tax are okay.
please help.
Thanks
Sanjeev

Try SAP Note # 96312 if that helps.

Error while transferring an employee from one position to another

When i am transferring an employee from one position to another i am not being able to do so. This position is visible in HRP10001.

Hi,
Have you tried using any other aciton like Org re-assignment, promotion action etc or tryid in PA30 itself?
Regards
ET

Error while transfering the data from local to master repository

Hi , Iam Working on SAP Learning Solution Implementation,we are using LSOAE200 as a Authoring Tool. When i am Transfering the Learning Net from the authoring tool to the master repository which is in portal, I am facing the following error:
Type=E, ID=NR, Number=751, Parameter='', Message='For object , number range interval does not exist'
com.sap.hcm.ls.shared.datamodel.ebo.EBOCatalogException: Type=E, ID=NR, Number=751, Parameter='', Message='For object , number range interval does not exist
we are able to make it out that the error is something which is not able to find the number ranges in R/3. Can any one of you please suggest me where exactly to create the number ranges in R/3.
Regards..
Kishore

Hi,
Please check table T77IV and see whether you haver assigned a number range for the object you want to transfer the data.
Please let me know in case you require any further clarifications.
With Regards,
Kaustuv Goswami.

Error while transferring SALES ORDER from ECC to SCM

Hi Experts,
I am working with SCM4.0 and ECC 5, while i transferring the sales order from ECC5 to SCM ,it encounters with the following errore message.
Sales order M-10 1000: Integration model does not contain material master
Message no. XC100
Diagnosis
To ensure a consistent dataset in SAP APO, the material master data for filter object Sales order M-10 1000 also has to be known in SAP APO. In the current case no entry was found for the combination in the models that were checked.
System response
Object Sales order M-10 1000 cannot be transferred correctly.
Any kind of suggestions would be appreciated well.
Thanks in advance..
Regards,
A.Fahrudeen

Hi Fahrudeen ,
I hope the master Data like Material and Location and Customer are not CIFed to APO prior to Sales order or else while ciffing the sales order you have not selected the sales order radio button and same time only enter the Material ,location and customer wothout the tick on filter objects for Mat/Loc and Cust.
Hope this helps..
Regds// Digs...

Error in transferring a Contract from R/3 to SRM

Hi Gurus,
we've implemented SAP SRM on an extended classic scenario with R/3 as the back-end system.
I transfer contracts from the back-end system to SRM by using the BBP_CONTRACT_INITIAL_UPLOAD report.
A problem occurs when the contract in the R/3 sytem has one or more deleted items which are not replicated in the SRM document version. Unfortunatly this causes the disallinement of the two contracts.
So, for instance:
Contract in the R/3 System
1st Item (Deleted)
2nd Item (Active)
3rd Item (Active)
When I transfer it to the SRM system I get:
Contract in the SRM System
1st Item (corresponds to the 2nd Item in the R/3 system)
2nd Item (corresponds to the 3rd Item in the R/3 system)
This means that when I create a PO in the SRM system from that contract using the first position, the PO goes in the error status because R/3 considers the first item of the contract deleted.
How can I fix this problem? Is there a way to let SRM to number the items in the correct way?
In the example I gave, I would like to have my SRM contract with two items (number 2 and 3 which actually match to the number 2 and 3 in the R/3 Contract).
I would really appreciate your help.
Thank you very much,
Giovanni Ottavio Lo Brutto
Edited by: Ottavio Lo Brutto Giovanni on Aug 29, 2008 2:32 PM

Hello Ganesh,
I did not talk about tab Attributs.
In PPOSA_BBP, one of your Organizational Unit must have in its tab Functions value 'Purch. Organization' set with correspondence in R/3 values (number and logical system).
Regards.
Laurent.

How to transfer vendor master from MM to SUS?

Hi friends
How to transfer vendor master from MM to SUS
Are the following steps correct
1.create vendor master in MM
2.use tcode BD14 in MM and enter partner system as SUS ( to send vendor master)
3.use BD15 in SRM to accept the master data from MM.
Please let me know if i am wrong
Thanks
Vinny

Hi Vinny,
Please follow below steps for transferring vendor master from MM to SUS.
!) Create a vendor master in MM and assign class type ALV under enviornment-Classification tab.
2)Go to BD14 and enter following fileds
Vendor number
Class
Message type
Target System...
Before doing BD14 hope you have done all the partner profile configuraion as well as model view creation and mapping has been established between MM to XI to SUS.
Before repliating vendor, please note that vendor root org unit has been created in SUS system.
After executing BD14 then check in your mm system WE05 whether idoc has been generated and sent to XI system.
If sent to XI system successfully then please check in SXMB_MONI t-code in XI what is status then finally check in SUS.....
If useful points please...
Thanks
Ravi

Error while transferring Vendor master from R/3 to SRM

Similar Messages

Maybe you are looking for