Error while transporting data source

Hello Gurus,
I am trying to transport a DSO, Data source, Transf, DTP in the same request but i am getting error code 8.
Here is the error log.
*Start of the after-import method RSRSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mod
InfoSource ZBIU_OTCSO_TR_VMI_ORDDEL is not available in source system PW2CLNT501
Error when activating DataSource ZBIU_OTCSO_TR_VMI_ORDDEL PW2CLNT501*_
Source system is BI source system and data source is based on a function module which have logic to get data from other DSO's and IO's with BI system.
Why its giving me an error saying Infosource no available in SS when i am transporting.
Did anyone came across similar issue? Any suggestions?
Thank you.

1)Check this infosource ZBIU_OTCSO_TR_VMI_ORDDEL flow in Dev system, where it is been used.. and also check the code in the FM.
2) IF you are trasnporting entirely a new data flow then goto transport connection and check.
3)If you are trasporting the existing flow(may not be entire flow, but like Datasource enhacment ..) cross check with PRD system for the earlier version and chek what are the changes which you are tying to do now.
2)check your Trasport request once again(collected objects)..Activate the FM, DS and then transport.
Hello YJV,
Its a new data flow from DEV to QA and i checked for that infosource in transport connection and there are no hits for that infosource. I found it only in the case of Datasource.
I doubt on the conversion of SS names. Can anyone tell me how I can validate the conversion of Source Systems.
Any suggetions?
Thx.

Similar Messages

Error while transporting Data sources from DEV to Qual

System : SCM 5.0 (SP 8), BI 7.0 (SP 12)
1) We are trying to transport Data source objects from Development server to Quality server.
2) Data sources of Type R/3 and Web Service.
3) We are able to transport the objects from Dev.
4) Once we import the objects to Quality server, the objects are becoming into INACTIVE stage.
Please help... Thanx in advance..
Regards
Manoj

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

Error while transporting data source from Dev to QA

Hi , I am transporting 0glaccext hier data source. I created the transport with the the transfer rules and the corresponding Infopackage. when I collect the transfer rules I have 4 transfer structures present in the transfer rules which are
" 0GLACCEXT_T011_HIER_BA1" BA2 , BA3 and BA4. when I am importing the data source, I am getting the following error messages
"Mapping between data source 0GLACCEXT_T011_HIER and source system QASCLNT400 is inconsistent"
and then
"Reference to transfer structure 0GLACCEXT_T011_HIER_BA1 not available. No activation possible.
Message no. RSAR436
Diagnosis
Transfer structure 0GLACCEXT_T011_HIER_BA1 should be transported into this system.
However, no DataSource mapping refers to this transfer structure.
System Response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer
structure 0GLACCEXT_T011_HIER_BA1 is on the same transport request. Use the transport connection to create a consistent request."
Any suggestions on how I need to handle this issue.
I am able to load the data succesfully in Dev and I am not have

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

Error while activating Data source

Hi,
I hit an error while activating data source with adapter 'WEB_PUSH web service'.
The error message is 'Generation of conversion exists and PSA update ...' with details 'Error generating Web service /BIC/CZZZ_0010000100 ...' and 'Error when activating DataSource ZZZ_001'.
I can't find much detail on this error.
Has anyone hit this error before and if you did can you please let me know what to check?
Thks & Regards,
Bbee

Hi,
I am having the same problem. Have you been able to solve the issue since you posted this last year?
Thanks,
TCT

Problem while transporting Data Source

I get error while transport datasource from DEV to PROD:
DataSource <DS> does not exist in source system <PRD_SYSTEM> of version A
Field <XXXX> will not be delivered from DataSource <DS> in source system <PRD_SYSTEM>
What does it mean? Do I need to activate <DS> datasource in source system PRD_SYSTEM?

Hi
1. Transport the Datasource from D to P system in R/3.
2. Replicate the corresponding R/3 Sorce system in BW Production system.
3. Right click on the datasource overview and check whether ur data source is available or not.
4. If available then transport all the required info objects first from BW Dev to Prod System.
5. Then transport your Infosource and other objects.
This way will be fine.
This error normally will occur when the data source is not replicated and the required info objects are not transported to the Prod system from Dev system.
Regards
M.A
Edited by: M.A on Jun 5, 2008 2:46 PM

Error while activating data source in BI

Hello Team
I am facing issues while activating data source. I followed following steps .
a)First i created my target
b)Then i made my Primary key as info provider
c)Then i created one source system under file.
d)Then i went to data source and created one application component
e)In this application component i created my data source
f)In this data source i imported my file and all the settings. Now when i am checking then it is not giving any error . But when i am trying to activate it it is giving error . Please find the supporting screesnhots . Can anyone please suggest me as to what is going wrong .

Hi,
Check the gateway settings for
Gateway Host
Gateway service
Also check the UDC connection information.
Check these links:
1 - http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
2 - http://help.sap.com/saphelp_srm40/helpdata/es/54/ddfb3ff778ed28e10000000a1550b0/content.htm
3 - https://encrypted.google.com/url?sa=t&source=web&cd=7&ved=0CCwQFjAG&url=http%3A%2F%2Fwww.bi-
expertonline.com%2Fdownloads%2FSchroeder0604.doc&rct=j&q=ud%20connection%20in%20sap%20bi&ei=WMDnTdm_E4ruvQOEzZWcDg&usg=AFQjCNGvqKuoTq9kypNMNGhis8WrZ-gFCg&cad=rja
Let us know in case the issue still persists.
Debanshu

Not enough memory for Data Provider-Error while creating Data Source

Hi,
I am loading data into Master Data_Attribute InfoObject I am getting following error message while creating Data Source under "Proposal" Tab
"Not enough memory for Data Provider"
My Master Data InfoObject having 65 attributes
My CSV file having 15,00000 records
I am using BI 7.0 version
If anybody faced this problem. Please share with me
Thanks.

Hi
Here the problem with the space so plz contact ur BASIS people to increase the spae for particular object.

Error while deleting data source : Message RSO414

Hello Guys,
We have activated data source 2LIS_04_PKKANBAN and entire standard BI content . When i tried to extract data, i got 0 records initially and after that i came to know that some functions needs to be activated in ECC to extract KANBAN data.
We activated some function and deleted & filled setup tables for KANBAN and i can see data in RSA3 (368 Records). Then i tried to extract data into SAP BI. it took me 20 minutes but ended with error. "Data Source needs to be activated again as it was changed (We just activated one function only) nothing changed to data source" I activated data source again in ECC and replicate on SAP BI side but i am not able to get it in activated mode.
I tried to activate it manually and it takes 20-25 minutes but i am not able to activate it and getting error "Error when activating DataSource : MESSAGE NO RSO414 " "Error when resetting DataSource 2LIS_04_PKKANBAN to the active version". i also can't delete data source as when i try to delete it, i get the error "ERROR WHEN DELETING DATA SOURCE : MESSAGE NO RSO414" . What to do in this situation ?
Regards,
Komik Shah

Hi Rahul,
I tried it but it didn't help me.
Also there is no FM in SAP BI called RS_DATASOURCE_ACTIVATE_ALL. I have activated data source in my ERP system and replicated same on BI side as we don't have standard Transfer Rules or Transformation, i can't use RS_TRANSTRU_ACTIVATE_ALL .
Regards,
Komik Shah

Error while creating data source in bi for uc connect

Hi Experts,
we have using ud connect to pull the data from ms sql server using jdbc,we have maintained all the settings in the j2ee engine and also we performed the smoke test which showed the tables content in the ms sql data base.
and also we have maintained the rfc connection between the j2ee and sap bi,and performed the test connection which excecuted great.
but while creating the data source in sap bi administration work bench(rsa1)>sourcesytem>udconnect>create
we have maintained the following parameters
rfc destination----
we have maintained the rfc destination,which we could see in sm59 for the sap bi client
logical system name----
we have mentioned a generic logical system name(here we are not sure)
type of connector----
jdbc
name of the connector------ sdk_jdbc
sourcesystemname----
it has taken the logical system name description when we enter the logical system name.
once after maintaining the setting.when we performed the check.
it showed us the error
check failed rfc connection:check destination

Hi,
Check the gateway settings for
Gateway Host
Gateway service
Also check the UDC connection information.
Check these links:
1 - http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
2 - http://help.sap.com/saphelp_srm40/helpdata/es/54/ddfb3ff778ed28e10000000a1550b0/content.htm
3 - https://encrypted.google.com/url?sa=t&source=web&cd=7&ved=0CCwQFjAG&url=http%3A%2F%2Fwww.bi-
expertonline.com%2Fdownloads%2FSchroeder0604.doc&rct=j&q=ud%20connection%20in%20sap%20bi&ei=WMDnTdm_E4ruvQOEzZWcDg&usg=AFQjCNGvqKuoTq9kypNMNGhis8WrZ-gFCg&cad=rja
Let us know in case the issue still persists.
Debanshu

ORA-06550/PLS-00201 error while configuring data source

Hi,
My development platform is Visual Studio 2005, ODAC11g Release 1 (11.1.0.6.20), and Oracle 10g Release 2 database.
I tried to setup a sqlDatasource in my web page using drag and drop features
When I configure the sqlDatasource to use a stored procedure inside a package,
I notice that odp.net uses #0# as separator (instead of .) between package name and procedure name in Configure Data Source dialog box. Then when I clcik the Test Query button, I got following error.
There was an error executing the query. Please check the syntax of the command and if present, the types and values of the parameters and ensure they are correct.
ORA-06550: line 1, column 7:
PLS-00201: identifier 'PK_LOOKUP_TABLE#0#P_LIST' must be declared
ORA-06550: line 1, column 7
PL/SQL: Statement ignored
It looks like odp.net cannot locate PK_LOOKUP_TABLE#0#P_LIST.
Is there any workaround ?
Below is the stored procedure code. It compiles and runs without problem.
PACKAGE BODY pk_lookup_table
AS
/* Get a list of lookup table name */
PROCEDURE P_LIST (
O_CURSOR OUT sys_refcursor )
IS
l_cur sys_refcursor;
BEGIN -- executable part starts here
OPEN l_cur FOR
SELECT table_name
FROM all_tab_comments u
WHERE u.comments LIKE '%Lookup Table%'
ORDER BY 1;
o_cursor := l_cur;
END P_LIST;
END "PK_LOOKUP_TABLE";
On the sqlDataSource property sheet, if I click the Select Query property, the Command and Parameter Editor will open, then I can change the select command name to PK_LOOKUP_TABLE.P_LIST. Then if I run the application, I get another error.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Oracle.DataAccess.Client.OracleException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'P_LIST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Seems that it can locate the procedure.
In the Command and Parameter Editor dialog, I can add output parameter, but data type is restricted. There is no REF CURSOR datatype in the dropdown list.
How can I add output parameter with REF CURSOR type via IDE ?
Thanks for the time looking into this issue.
Mansion

Hi
Even I faced this problem while connecting to RMAN . But I feel your problem is different .
My issue was like this
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'DBMS_BACKUP_RESTORE.SET_CHARSET' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
RMAN-04015: error setting target database character set to WE8MSWIN1252
Solution :
execute catproc.sql;

Error while creating data source using Oracle Enterprise Manager 10g

Hi,
I have deployed my web application developed on OC4J 9.0.4 stand alone (Win2K) to an integrated OC4J version(Solaris) using Oracle Enterprise Manager 10g.
However, I get an error when I try to create a data source.
The data source I want to create would have the following parameters (as seen in data-sources.xml on the stand alone version):
     <data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="TestDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="jdbc/TestDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          url="jdbc:oracle:thin:@hostName:1521:test"
          username="user"
          password="password"
          min-connections="5"
          max-connections="20"
          inactivity-timeout="30"
     />
When I entered the above data on the Enterprise Manager Data Sources page, I got the following error:
quote:
Error saving Data Source Properties. - Entity et="system";ei="0",et="application";ei="48",et="data-sources";ei="167":child:data-sourcechild key:location:jdbc/OracleCoreDS; class:com.evermind.sql.DriverManagerDataSource; already exists in the repository. Resolution: Please check the code base.
unquote:
Could somebody tell me what I'm doing wrong ?
I tried to manually edit the data-sources.xml file but the data source didn't show up on the Enterprise Manager.
I'm using a new OC4J instance (on the Solaris machine) for my applications. Is the data source error related to this?
Any help will be greatly appreciated.
Thanks,
Shyam

Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="OracleDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="jdbc/OracleDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="scott"
          password="->pwForScott"
          url="jdbc:oracle:thin:@localhost:1521:oracle"
          inactivity-timeout="30"
     />
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam

Error while creating data source using table KONP

Hi Frnds,
I am creating a data source (RSo2) from Extraction from view, using the Table KONP , then i getting an error saying that
Field KBETR with reference field KONWA: ZOXPTS0031 is to replace reference table RV13A
Message no. R8390
Field MXWRT with reference field KONWA: ZOXPTS0031 is to replace reference table RV13A
Message no. R8390
Field GKWRT with reference field KONWA: ZOXPTS0031 is to replace reference table RV13A
Message no. R8390
Regards
rakesh

You have to include reference fields also in the extract structure.

Crystal Report runtime error while changing Data Source Location

Dear All
We are using "Crystal reports for SAP Business one".The Crystal reports version is 12.1.
We built a report in another database with another server.
As we are importing the report in another database of another server,
I am not able to change the Data Source location.
When I am trying to change it,it gives Runtime error and closed automatically.
How can i resolve and change the data source location?

hi kambadasan,
is your CR version the same from which you design the report and to the another server? also did you import your report directly to SBO without changing the data source first? in the case you should update first your Data Source in Crystal Report IDE before importing it to SBO.
regards,
Fidel

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

Error while transporting data from DevBI to QualityBI

Hi all,
After transporting SD cubes,along with some warnings I received the foollowing error in BI quality system..
Master Data Table /BI0/PMATERIAL contains data: Characteristic 0MATERIAL cannot be activated                                        |
SID Table /BI0/SMATERIAL contains data: Characteristic 0MATERIAL cannot be activated                                                |
Text Table /BI0/TMATERIAL contains data: Characteristic 0MATERIAL cannot be activated
I remember that sometimes transport error occurs if there is data inside master data object.Remove the data and transport the infoobject again.Is that right?
Please help me out how to resolve the error.
Thanks.

Thanks for the reply.
I dont have an intention to delete the data from infoobject.
Somewhere I read that transport error results in some cases if there is data inside the infoobject.I am not sure if its correct or not.
Master Data Table /BI0/PMATERIAL contains data: Characteristic 0MATERIAL cannot be activated                                        |
SID Table /BI0/SMATERIAL contains data: Characteristic 0MATERIAL cannot be activated
     | Text Table /BI0/TMATERIAL contains data: Characteristic 0MATERIAL cannot be activated
Inorder to solve the error,what should i do?
Please reply back.

Error while transporting data source

Similar Messages

Maybe you are looking for