Error while transporting PCs and Info packages frm dev to qa

Hello Guyz
First of all, I am new to this forum. Heard a lot about it, and I hope I can learn a lot by the exchange of information in this forum. I ve already gone through so many threads, and have gained a lot of insight in BW.
I have an issue, where I am transporting process chains and info packages from dev to qa. But the transports have thrown errors, saying that the 'Source System XXXCLNTXXX does not exist and info package has been deleted'.
My question: How can I transport these objects in such a way that the loads which were going from ECCDEV to BWDEV, now go from ECCQA to BWQA? Are there any settings in SE09 or SE10 or somewhere in BW where I can do this?
Thanks in advance.
Atul.

Hi Atul........
There is no such settings........check this.......
How to transport BW object
Anyways.....I think there is some problem in the Client name.......Just check the Source system name in RSA1...........if it has been changed somehow........then run transaction BDLS and change the source system assignment........
Regards,
Debjani......

Similar Messages

  • Errors While Transporting Transformations and DTPs

    Hi Experts,
    Iu2019m trying to transport transformations and DTPs from DEV to QA and am getting the following error messages.  Does anyone know whatu2019s happening and how I can fix this?
    Thanks,
    Janice
    The following are excepts from the log of the transport organizer with further SAP supplied information on the error messages.
    Transformations:
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode) 
    Activation of Objects with Type Transformation                                                  
    Checking Objects with Type Transformation                                                       
    Checking Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4                                        
    No rule exists                                                                               
    Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed                                             
    Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed
    Message no. RSTRAN802
    No rule exists
    Message no. RSTRAN514
    DTPs:
    Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
    Conversion of T version from DTP DTP_4FG5GXT9OLNN3YM3QFMW9V3W5 to M version...                 
    Conversion of T version from DTP DTP_4FK894515QD0O9UM4JSJPIB91 to M version...                 
    Activation of Objects with Type Data Transfer Process                                          
    Saving Objects with Type Data Transfer Process                                                 
    Saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A                                     
    Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)               
    Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A                               
    Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)
    Message no. RSTRAN715
    Diagnosis
    The transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (not executable).
    This can be caused, for example, by a change made to the source object or target object of the transformation.
    The transformation connects the source  to the target .
    Procedure
    The transformation must be reactivated.
    Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
    Message no. RSO843

    Thanks so much everyone for your suggestions.  Iu2019ve tried them all and hereu2019s what I now have:
    Anil u2013 Active datasources were included in the original transport.  I tried retransporting and got the same error messages.
    Voodi u2013 0ACCOUNT_TEXT was resident in the Q system as a 3x datasource.  I replicated it as a 70 datasource in D and this is what was transported to Q.  It is a 7.0 datasource in Q.  I got the same error messages when I tried transporting just the transformations.
    Jayaram - 0ACCOUNT is active in the Q system and is currently being used in transformations other than the one Iu2019m trying to import.
    Godhuli u2013 I not only re-replicated the datasource in D, I reactivated the transformations and DTPs and resaved the InfoPackages.  I tried retransporting with a new transport request and it failed with the same error messages.
    Is there anything else anyone can think of?
    Thanks,
    Janice

  • Error While Transporting Transformation and DTP

    I am trying to transport Transformation and DTP.But its giving following error.
    <b>Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)   
    InfoObject xxxx has a characteristic routine, but no rule                                  
    InfoObject xxxx has a characteristic routine, but no rule                                   
    InfoObject xxx has a characteristic routine, but no rule                                      
    InfoObject xxx has a characteristic routine, but no rule                                   
    No rule exists                                                                               
    Transformation  : Rule 1 could not be imported                                                    
    Transformation  : Rule 2 could not be imported                                                    
    Transformation  : Rule 8 could not be imported                                                    
    Transformation  : Rule 9 could not be imported                                                    
    Transformation  : Rule 60 could not be imported                                                   
    Transformation  : Rule 109 could not be imported                                                  
    Transformation  : Rule 128 could not be imported                                                                               
    Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)   
    Conversion of T version from DTP xxxx to M version...                    
    An exception has occurred                                                                               
    </b>
    Any help.Thanks

    Hello,
    Do you have any routines in the transformation you are trying to transport. Looks like its missing some routines that needs to be transported.
    Hope that helps.

  • Error while transporting transformations and datasource Urgent need Help

    Hi all,
    I have been working on this problem for a few days now. I created an ODS object, transformations,  DTP and I am using a  R/3 datasource for extraction. The ODS populates fine in the Dev box, the tranformations and the datasource are fine only in the Dev box. I tried to tranport the objects to the QA box from the Dev Box. Only the ODS transports properly. The transformations are not transported at all. Here is the error I get:
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
    No rule exists
    Rule 1 of transformation   () is not valid and is being deleted
    Rule 2 of transformation   () is not valid and is being deleted
    Error occurred during post-handling RS_After_import for TRFN L
    Ended with return code : ==> 8 <===    
    Please do let me know what could be the problem. Please do respond ASAP......
    if you experienced this issue please let me know how you solved it or a possible work around. any help will be greatly appreciated....
    So far we have been using only 3.5 objects. This is the first 7.0 (end to End) transport.

    Hi voodi,
    I just followed the exact sequence that you mentioned. I transported the
    DataSource first....then ODS(write optimized)....then transformations....then Dtp & infopackage.
    data source  ... no errors
    2) ODS ..... no errors
    3) Transformations .... Error....same as mentioned in my earlier post....
    4) DTP and Infopackage ....Error  similar to whats mentioned ...and it says that transformation does not exist.
    Could it be an issue with Source System Translation .....  I dont know much about it .....could you please tell me what it could be and how to resolve it.   I am thinking in these lines because the source system in QA3 exists in the Data Souces Folder and it has  translated properly to QA3Client300. But under the Infoproviders folder (in Q03)...under my DSO the data source still shows Dev3Client 200(client not changed). If this is the issue do you think I need to talk to Basis support for asking them to modify the transport(internally)......can it be done....
    please do give me your feedback....thank you.

  • Error while transporting Infocube and Update rules

    Hi ,
        My infocube is having warnings for 4 key figures as "InfoCube contains the key figure 0DSCT_PCT1 with the impermissible aggregation NOP" .But when I ma trying to transport I am getting eroors in transport but still The cube got migrated in active form.But the update rules are not getting transported.They show me an error Error when activating update rule 3CFLSNV4LN26C1URF15PR6XSA    ".  This is very urgent for me.
    Can any one help me please.I promise to give reward points.
    Thanks,
    Jyothi.

    Hi,
       My key figures are in active form only.I transported the active keyfigures from development to quality.I am not supposed to make any changes directly in QA .My problem is in transporting update rules.It gives an error message 095 Error when activating update rule "3CFLSNV4LN26C1URF15PR6XSA"
    461 IC="0FIAR_C03" IS="80FIAR_O03" error when checking the update rules
    Errors occurred during post-handling "RS_AFTER_IMPORT" for "ROUT" "L"
    The errors affect the following components:
    "BW-WHM" ("Warehouse Management").

  • Error while transporting objects from one package to another

    Hi Everyone,
    I am using a FM 'HR_INFOTYPE_OPERATION' to update a value into a table pa0584 table.
    If i try to upload all the values i am getting a return value like " No of Entries exceeds more than 20".
    So please help me out.
    Thanks
    Vijay

    Hi,
    You can merge your different requests into a single request. goto se09  select any one of your request and in menu,
    Utilities -> Reorganize -> Merge Requests. or press CTRL + F12.
    hope this helps u.,
    Thanks & Regards,
    Kiran

  • Error while transporting 0MAT_PLANT

    Hi Experts
    I am getting error while transporting 0MAT-PLANT to Prod System.It going fine to QA system.
    it is giving the follwoing error with return code 8
    Characteristic 0MAT_PLANT: Master data has to be activated before conversion
    Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Delete Mode)
    Errors occurred during post-handling RS_AFTER_IMPORT for DTPA L
    RS_AFTER_IMPORT belongs to package RS
    The errors affect the following components:
    BW-WHM (Warehouse Management)
    I have deleted one Info-object (Key figure) and added one info-object(Key figure) to 0MAT_PLANT ,transported still it is giving errors it is going fine to QA.
    1.Is it because we have large no of records in Prod system ..??
    2.Do we need to delete the data in Prod for 0MAT_PLANT and transport....????
    3.Is it related to any database error in adjusting P table in Prod...?
    Please let me know anybody faced this kind of problem.
    Regards
    Prasad

    Hi Prasad,
    Just to summarise the discussion. If you need to send the transport successfully you need to the following steps:
    1. MD (complete) needs to be deleted from IOBJ. Please note, unless you delete the TD data involving the IOBJ, you will not be able to delete MD completely.
    The reason being, the SID's for the MD are being used in the various IC/DSOs. So you need to go by deleting related TD and then MD.
    2. Secondly, if you forcibly delete for 'P' and 'S' table using the SE14-> Table Name -> Delete Data & adjust Db. This will cause lot of inconsistencies on Drill Down in reports and even on execution as SID values are missing!
    Moreover, as you said there are around 10/12 InfoProviders involved here, then this forcefull deletion can cause a real imapct to your Prod system and make many reports unsusable! So pls be careful!
    Please decide accordingly as there is a trade off here!
    -VA
    Edited by: Vishwa  Anand on Sep 27, 2010 12:15 PM

  • Error while transporting - Source RSDS 8ZRF_O01 LOGDBQ151 does not exist

    Hi,
        I am getting following error while transporting export DataSource to quality system.
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
    No rule exists
    Source RSDS 8ZRF_O01 LOGDBQ151 does not exist
    Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
    Transformation does not exist (see long text)
        Although, the request is failing, I can see the DataSource 8ZRF_O01 present in the QA system. Only the transformation is set inactive.
    Regards,
    Pranav.
    Edited by: P D on Sep 20, 2010 9:02 AM

    Hi
      might be your data source not collected into transport request.
    If you are moving data source from once system to other system, this may missed.
    RSA1->Transport connection>all objects>Datasource --> Select your data source as only neecessary to move
    When ever we are moving objects from one system to other follow below are order to avoid failures
    1).New Infoobjects.
    2). Data source/Infosource
    3). Info Providers ( Cube/DSo)
    4). Update rules/Transformation
    5).Impacted objects and other
    Mahesh.

  • Error while Transporting Update Rules.

    hi xperts,
       I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
        Start of the after-import method for object type R3TR ROUT (Delete Mode)
    Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
    The errors affect the following components:
        BW-WHM (Warehouse Management)
    Is the  error,I didn't change any thing in the Cube or changes to Update rules.
    Can anybody Help me?.
       thanking you,
                                   with regards,
                                   Narendra.

    Hi,
    Are you still facuing the issue ?
    No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
    If you know the technical names of the routines you can check in the TADIR table.
    Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
    Hope it helps.
    Thanks,
    Soumya

  • Error while transporting Transformation: Syntax error in Start Routine

    Hi Everyone,
    I'm facing a strange problem during transporting one of the Business Content cubes from Dev. to Quality.
    I'd activated the DSO 'Purchase Order Items (0PUR_O01)' and its entire data flow from the 4 datasources 2LIS_02_CGR, 2LIS_02_SCN, 2LIS_02_SGR, and 2LIS_02_ITM from BC. Then I migrated the Transfer/Update rules to transformations and the DataSources to BI7 DataSource. So far so good. The migration was successful and all the objects were activated.
    Now when I transport the same to Quality, the import fails with return code 8 and the error message says:
    'Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)'
    'Start Routine: Syntax error in routine'
    I verified that the transformation where the error orrured was the one from InfoSource Z2LIS_02_ITM to DSO 0PUR_O01. I went and checked the start routine and it did indeed have a syntax error:
    'In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter SOURCE_PACKAGE" is incompatible with the formal parameter DATA_PACKAGE". '
    But when I check in the Dev. system, there is no syntax error for the same routine. Later, I tried to transport only the said transformation by re-activating it in Dev, and again I got the same error.
    I have no idea why I'm getting a syntax error in the start routine when there are non in the Dev. system. Also none of the coding is customised, it was only the BC code, migrated to a transformation.
    Any suggestions on the steps I could take to transport the transformation to my quality system?
    Thanks,
    Ram

    Hi Ajay, Shanthi, svu and Ray
    I do indeed have a start routine in my transformation and it was migrated from a 3.x update rule to a BI 7 transformation routine.
    The migration was successful and the Start Routine has NO syntax errors in the start routine in the Dev. system. I only encounter the error while transporting it to the Quality system. I cannot modify the code in the Quality system because it is non-changelable and there is no point in trying to change the code in Dev. because there are no errors over there.
    I've also made sure that I've transported all the necessary objects required by the transformations to quality. The routine does not perform a lookup, it simply deletes some records from the data package based on the processkey value (which is itself present in the data package).

  • Error while transporting a Workbook

    Hi Pioneers
                  I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".     
        Could u let me out with a possible solution....Plz...
    BR
    Sekhar.D.R

    Hi,
    You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
    Hope this helps
    Assign points if useful
    Regards,
    venkat

  • Error while transporting custom datasource

    Hi All,
    Below is the scenario that was carried out in my project.
    1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
    2. Created a custom Datasource ZABC_TEST with the above table.
    3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
    4. Tried transporting the above. But trows error while transporting the data source.
    Error -- InfoSource ZABC_TEST is not available in source system BITST.
    Let me know what can be done to solve the above error. Please suggest if i have missed out something.
    Thanks in advance.
    Maddy

    HI,
    The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
    Transport first the DS in a request, then in another request transport the OHD.
    This should resolve the issue.
    hope this helps.
    thanks,
    rahul

  • Error While Transporting Transformation

    Hi Gurus, I have this issue that I am getting an error while transporting Transformation. I made sure that that only transformation is sected and nothing else. I am getting this error message while importing it in BWQ environment "Formula 4AY060939P5D2NKRXKMJFECLS is already locked in the requests of other users or the system is set so that formula 4AY060939P5D2NKRXKMJFECLS can no longer be changed."
    I was wondering, if this is locked by some other object or transport request, how can I find that out? Thanks in advance for all the help.

    Hi,
    You can check if the request is locked by another transport in BWQ by using the transaction SE03.
    First find the object directory entry for your object(you can take this from your transport. Go to SE03 --> 'Search for Objects in Requests/Tasks '. Under object selection enter the details as in your transport and select the check box against your new entry. Under Request/Task selection, select 'Modified' and 'Released'. Execute. You will now see a list of transport requests that contain your transformation. Check these & either release them or delete your object from the modifable transports. Re import your transport.
    You can check if this object was locked by a person using the transaction SM12.
    Regards,
    Shilpa

  • Error while transporting Openhub (BI7)

    Hi Gurus,
    I am getting an error while transporting the open hub. In the dev system it worked perfectly but when i transport it to quality, it is showing the following error.
    "Unable to activate table /BIC/OHZxxxxxx ."
    When i checked the table in quality it says that /BIC?OHZxxxxx-0UNIT ( Reference field ) does not exists. But 0UNIT is there in the DSO on which i developed the openhub and the infoobject 0unit is also active in quality system.
    Why this error is happening?
    Regards,
    Raghavendra.

    Hi Raghavendra,
    There are chances of missing some objects in transport request wile assigning objects to request...please check the objects list and open hub structure.
    and also plsease check the 0Unit field status in Quality system.if it is in modified status means make it it active ststus.
    Please create one more transport request and validate the tr objects...
    Best Regards,
    maruthi

  • Error while transporting standard cube

    Hi
    We are facing errors while transporting a standard cube and all relevant objects.
    While collection it throws errors saying certain routines are not active, whilst unable to find those routines.
    If we ignore and transport the same, transformations es are not being transported.
    How to resolve this., please provide inputs.
    regards
    Lavanya

    Hi Lavanya
    The error log says these objects are in repair mode in this system. I searched the system for the trnsformations, but they are not present. How do we resolve these
    This only means that the objects were changed directly in the target system (could be QA or prod) and are captured in some request. You need to find the relevant request on the target system and take the appropriate action. You could chose to delete the request or transport it from QA to Prod.
    Find the requests on the target system and you will see the tranaformations collected. However, it is not going to be an easy taskl for you to find as the TR will be with the technical name. But this is definitely the reason for the error.
    Cheers
    Umesh

Maybe you are looking for