Error while transporting transformations and datasource Urgent need Help

Hi all,
I have been working on this problem for a few days now. I created an ODS object, transformations, DTP and I am using a R/3 datasource for extraction. The ODS populates fine in the Dev box, the tranformations and the datasource are fine only in the Dev box. I tried to tranport the objects to the QA box from the Dev Box. Only the ODS transports properly. The transformations are not transported at all. Here is the error I get:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Rule 1 of transformation () is not valid and is being deleted
Rule 2 of transformation () is not valid and is being deleted
Error occurred during post-handling RS_After_import for TRFN L
Ended with return code : ==> 8 <===
Please do let me know what could be the problem. Please do respond ASAP......
if you experienced this issue please let me know how you solved it or a possible work around. any help will be greatly appreciated....
So far we have been using only 3.5 objects. This is the first 7.0 (end to End) transport.

Hi voodi,
I just followed the exact sequence that you mentioned. I transported the
DataSource first....then ODS(write optimized)....then transformations....then Dtp & infopackage.
data source ... no errors
2) ODS ..... no errors
3) Transformations .... Error....same as mentioned in my earlier post....
4) DTP and Infopackage ....Error similar to whats mentioned ...and it says that transformation does not exist.
Could it be an issue with Source System Translation ..... I dont know much about it .....could you please tell me what it could be and how to resolve it. I am thinking in these lines because the source system in QA3 exists in the Data Souces Folder and it has translated properly to QA3Client300. But under the Infoproviders folder (in Q03)...under my DSO the data source still shows Dev3Client 200(client not changed). If this is the issue do you think I need to talk to Basis support for asking them to modify the transport(internally)......can it be done....
please do give me your feedback....thank you.

Similar Messages

Errors While Transporting Transformations and DTPs

Hi Experts,
Iu2019m trying to transport transformations and DTPs from DEV to QA and am getting the following error messages. Does anyone know whatu2019s happening and how I can fix this?
Thanks,
Janice
The following are excepts from the log of the transport organizer with further SAP supplied information on the error messages.
Transformations:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4
No rule exists
Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed
Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed
Message no. RSTRAN802
No rule exists
Message no. RSTRAN514
DTPs:
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Conversion of T version from DTP DTP_4FG5GXT9OLNN3YM3QFMW9V3W5 to M version...
Conversion of T version from DTP DTP_4FK894515QD0O9UM4JSJPIB91 to M version...
Activation of Objects with Type Data Transfer Process
Saving Objects with Type Data Transfer Process
Saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)
Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)
Message no. RSTRAN715
Diagnosis
The transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (not executable).
This can be caused, for example, by a change made to the source object or target object of the transformation.
The transformation connects the source to the target .
Procedure
The transformation must be reactivated.
Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Message no. RSO843

Thanks so much everyone for your suggestions. Iu2019ve tried them all and hereu2019s what I now have:
Anil u2013 Active datasources were included in the original transport. I tried retransporting and got the same error messages.
Voodi u2013 0ACCOUNT_TEXT was resident in the Q system as a 3x datasource. I replicated it as a 70 datasource in D and this is what was transported to Q. It is a 7.0 datasource in Q. I got the same error messages when I tried transporting just the transformations.
Jayaram - 0ACCOUNT is active in the Q system and is currently being used in transformations other than the one Iu2019m trying to import.
Godhuli u2013 I not only re-replicated the datasource in D, I reactivated the transformations and DTPs and resaved the InfoPackages. I tried retransporting with a new transport request and it failed with the same error messages.
Is there anything else anyone can think of?
Thanks,
Janice

Error While Transporting Transformation and DTP

I am trying to transport Transformation and DTP.But its giving following error.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
InfoObject xxxx has a characteristic routine, but no rule
InfoObject xxxx has a characteristic routine, but no rule
InfoObject xxx has a characteristic routine, but no rule
InfoObject xxx has a characteristic routine, but no rule
No rule exists
Transformation : Rule 1 could not be imported
Transformation : Rule 2 could not be imported
Transformation : Rule 8 could not be imported
Transformation : Rule 9 could not be imported
Transformation : Rule 60 could not be imported
Transformation : Rule 109 could not be imported
Transformation : Rule 128 could not be imported
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Conversion of T version from DTP xxxx to M version...
An exception has occurred

Any help.Thanks

Hello,
Do you have any routines in the transformation you are trying to transport. Looks like its missing some routines that needs to be transported.
Hope that helps.

Error While Transporting Transformation

Hi Gurus, I have this issue that I am getting an error while transporting Transformation. I made sure that that only transformation is sected and nothing else. I am getting this error message while importing it in BWQ environment "Formula 4AY060939P5D2NKRXKMJFECLS is already locked in the requests of other users or the system is set so that formula 4AY060939P5D2NKRXKMJFECLS can no longer be changed."
I was wondering, if this is locked by some other object or transport request, how can I find that out? Thanks in advance for all the help.

Hi,
You can check if the request is locked by another transport in BWQ by using the transaction SE03.
First find the object directory entry for your object(you can take this from your transport. Go to SE03 --> 'Search for Objects in Requests/Tasks '. Under object selection enter the details as in your transport and select the check box against your new entry. Under Request/Task selection, select 'Modified' and 'Released'. Execute. You will now see a list of transport requests that contain your transformation. Check these & either release them or delete your object from the modifable transports. Re import your transport.
You can check if this object was locked by a person using the transaction SM12.
Regards,
Shilpa

Error while transporting Transformation: Syntax error in Start Routine

Hi Everyone,
I'm facing a strange problem during transporting one of the Business Content cubes from Dev. to Quality.
I'd activated the DSO 'Purchase Order Items (0PUR_O01)' and its entire data flow from the 4 datasources 2LIS_02_CGR, 2LIS_02_SCN, 2LIS_02_SGR, and 2LIS_02_ITM from BC. Then I migrated the Transfer/Update rules to transformations and the DataSources to BI7 DataSource. So far so good. The migration was successful and all the objects were activated.
Now when I transport the same to Quality, the import fails with return code 8 and the error message says:
'Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)'
'Start Routine: Syntax error in routine'
I verified that the transformation where the error orrured was the one from InfoSource Z2LIS_02_ITM to DSO 0PUR_O01. I went and checked the start routine and it did indeed have a syntax error:
'In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter SOURCE_PACKAGE" is incompatible with the formal parameter DATA_PACKAGE". '
But when I check in the Dev. system, there is no syntax error for the same routine. Later, I tried to transport only the said transformation by re-activating it in Dev, and again I got the same error.
I have no idea why I'm getting a syntax error in the start routine when there are non in the Dev. system. Also none of the coding is customised, it was only the BC code, migrated to a transformation.
Any suggestions on the steps I could take to transport the transformation to my quality system?
Thanks,
Ram

Hi Ajay, Shanthi, svu and Ray
I do indeed have a start routine in my transformation and it was migrated from a 3.x update rule to a BI 7 transformation routine.
The migration was successful and the Start Routine has NO syntax errors in the start routine in the Dev. system. I only encounter the error while transporting it to the Quality system. I cannot modify the code in the Quality system because it is non-changelable and there is no point in trying to change the code in Dev. because there are no errors over there.
I've also made sure that I've transported all the necessary objects required by the transformations to quality. The routine does not perform a lookup, it simply deletes some records from the data package based on the processkey value (which is itself present in the data package).

Error while activating transformations? can you please help me

Hi
I am trying to create info cube , i created info objects, info cube,datasource. when i am trying to creat transformation it is throwing and error :
Error while activating transformation
Message no. RSTRAN510
Can any one help me?
Srinath

Hi
I think you are trying to activate the transformation.
Have you tried to generate proposal?
I think you will get the following error message :
Cannot generate proposal
Message no. RSTRAN017
the system would never generate a proposal . u need to map the fields manually in the transformations... after u map it ... check the mapping and activate it ...
Due to this when you are going to activate the transformation it is throwing this error message.
If this works kindly assign me some points.
Regards,
Debjani..

Error while transporting a WEBservice Datasource

Hi all,
I am trying to transport a web service datasource(PI data to BW) in testing system . But while transporting ,I get the following error in the logs of my transport request.
Error generating the Web service /BIC/CQZPI_KPI00002000
This is not an authorization issue as I have got the required authorizations from the basis team .
Can anyone please give me some solution to this error.
Many Thanks in Advance

Hi.
Did you checked the following notes to solve this issue?
1177867 Error while deleting Web service in BI After Import
1177005 Error while activating/deleting Web service in BI
1170688 DataSource: Missing replication in transport
Please check also if Myself connection was correctly set in your system.
538052 Maintenance of Myself destination in BW.
Please check if enough authorizations were assigned to user who is
transporting this request.
913944-Error RSDS 301 when you activate a Web Service Data
Please try to check the data format. Check if some fields are mentioned in
logs and set them to EXTERNAL before the transport.
Please try also to activate the DataSource in the source system and
then create a new transport request and transport it.
I hope I can be helpful.
Thanks,
Walter Oliveira.

On my MacBook Pro I forgot my user password and I didn't enable Apple ID recoveries and I urgently need help finding a way to recover the password.

I urgently require help in recovering my user password for my MacBook Pro on OS X Lion, I forgot my password and Apple ID recoveries aren't enabled and I can't enable them as I don't know my password and my hint didn't help me at all, I really, really need help!

Also, a solution may be found if you search in the "More Like This" section over in the right column.Solution may be found if you search in the "More Like This" section over in the right column.

Error while transporting PCs and Info packages frm dev to qa

Hello Guyz
First of all, I am new to this forum. Heard a lot about it, and I hope I can learn a lot by the exchange of information in this forum. I ve already gone through so many threads, and have gained a lot of insight in BW.
I have an issue, where I am transporting process chains and info packages from dev to qa. But the transports have thrown errors, saying that the 'Source System XXXCLNTXXX does not exist and info package has been deleted'.
My question: How can I transport these objects in such a way that the loads which were going from ECCDEV to BWDEV, now go from ECCQA to BWQA? Are there any settings in SE09 or SE10 or somewhere in BW where I can do this?
Thanks in advance.
Atul.

Hi Atul........
There is no such settings........check this.......
How to transport BW object
Anyways.....I think there is some problem in the Client name.......Just check the Source system name in RSA1...........if it has been changed somehow........then run transaction BDLS and change the source system assignment........
Regards,
Debjani......

Error while transporting Infocube and Update rules

Hi ,
My infocube is having warnings for 4 key figures as "InfoCube contains the key figure 0DSCT_PCT1 with the impermissible aggregation NOP" .But when I ma trying to transport I am getting eroors in transport but still The cube got migrated in active form.But the update rules are not getting transported.They show me an error Error when activating update rule 3CFLSNV4LN26C1URF15PR6XSA ". This is very urgent for me.
Can any one help me please.I promise to give reward points.
Thanks,
Jyothi.

Hi,
My key figures are in active form only.I transported the active keyfigures from development to quality.I am not supposed to make any changes directly in QA .My problem is in transporting update rules.It gives an error message 095 Error when activating update rule "3CFLSNV4LN26C1URF15PR6XSA"
461 IC="0FIAR_C03" IS="80FIAR_O03" error when checking the update rules
Errors occurred during post-handling "RS_AFTER_IMPORT" for "ROUT" "L"
The errors affect the following components:
"BW-WHM" ("Warehouse Management").

Error while installing quicktime and/or Itunes, please help.

Okay, it all started when I tried to update Itunes, while installing the new Itunes an error came, so I had to uninstall it all and reinstall. However, now whenever I try to reinstall quicktime, it gives this error.
The path uninstall quicktime for the map contains an invalid character.
However, it doesn't even specifiy which map, anyone has an idea how to solve this problem?
Regards, Jelmew

Anyone please? Not being able to use my ipod is very annoying.

Error While Starting the OLiteService... need help

i have Oracle Lite 9i installed on my box and when i am trying to start the service, it is giving me the following error.
The description for Event ID ( 0 ) in Source ( OliteService ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: OliteService error: 126, Fail to start Olite Server.
looks like some registry information is missing.
can anyone help me on that.
i am trying to run an application which will talk to the Lite database instead of the enterprise database.
Thanks,
Milind

HI,
Try olsv2040.exe /install
This should install the service. If this does not work. try
olsv2040.exe/remove followed by olsv2040.exe/install. You need to sufficient OS privilege to execute above commands.
-- Ravi

Error while transporting custom datasource

Hi All,
Below is the scenario that was carried out in my project.
1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
2. Created a custom Datasource ZABC_TEST with the above table.
3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
4. Tried transporting the above. But trows error while transporting the data source.
Error -- InfoSource ZABC_TEST is not available in source system BITST.
Let me know what can be done to solve the above error. Please suggest if i have missed out something.
Thanks in advance.
Maddy

HI,
The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
Transport first the DS in a request, then in another request transport the OHD.
This should resolve the issue.
hope this helps.
thanks,
rahul

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Error while transporting standard cube

Hi
We are facing errors while transporting a standard cube and all relevant objects.
While collection it throws errors saying certain routines are not active, whilst unable to find those routines.
If we ignore and transport the same, transformations es are not being transported.
How to resolve this., please provide inputs.
regards
Lavanya

Hi Lavanya
The error log says these objects are in repair mode in this system. I searched the system for the trnsformations, but they are not present. How do we resolve these
This only means that the objects were changed directly in the target system (could be QA or prod) and are captured in some request. You need to find the relevant request on the target system and take the appropriate action. You could chose to delete the request or transport it from QA to Prod.
Find the requests on the target system and you will see the tranaformations collected. However, it is not going to be an easy taskl for you to find as the TR will be with the technical name. But this is definitely the reason for the error.
Cheers
Umesh

Error while transporting transformations and datasource Urgent need Help

Similar Messages

Maybe you are looking for