Error while trying to access our inbox from nbwc

Hi all,
After doing a local client copy of client 400 into client 500 (using SAP_CUS and then SAP_USER profiles) we’re receiving the following error whenever we try to access the inbox of some users in nwbc transaction.
This is happening in a GRC 10.
Our current SPs level are:
I'm also attaching two traces: one from an user who could access and other who can not. ST22 log also attached.
Please let me know if you need more information.
Any suggestion would be much appreciated.
Best regards,
Sebastian Mercuri

Hi Mercuri Sebastian,
you need to client copy from 000 to new client with SAP_ALL profile. this will fix the error.
Regards,
Arif

Similar Messages

RFC Error while trying to access function module from business connector

Hi,
I am getting the following RFc exceptions in BC server when we invoke the service pub.sap.client:invoke fail as a flow step in Idoc_Status_Add(this service is calling a function module in sap namely ZYBC_IDOC_STATUS_ADD_FROM_BC which Adds status to Idoc (from Business Connector).But no trace of failures are recorded in sap side
except 1: rfc_failure in BC trace files under monitoring.I need to know the root cause of these errors as the same services have run finely later and IDOCs were also processed successfully without any problem.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: See RFC trace file or SAP system log for more details
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1217)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3684)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3129)
at com.wm.pkg.sap.rfc.SAPSession.invoke(SAPSession.java:437)
at pub.sap.client.invoke(client.java:297)
at java.lang.reflect.Method.invoke(Native Method)
at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:496)
at wm.server.net.EmailTransaction$RunService.write(EmailTransaction.java:1375)
at wm.server.net.EmailTransaction$RunService.run(EmailTransaction.java:1218)
at com.wm.util.pool.PooledThread.run(C:/NT/Perforce/basis/4.1.0-terra/module/core/source/com/wm/util/pool/PooledThread.java:103)
at java.lang.Thread.run(Unknown Source)
could anyone throw light on how this kind of error can be resolved and why it occured?
Thanks.

What does the RFC trace file and log say? Has there been any dump on the SAP server? Check the logs and transaction st22 in your SAP system to see if the RFC-module has dumped.
My guess is the problem is in the RFC-module, I think you should start looking there.
regards,
Dionisios

EDA Error while trying to access the personal details.

Hi All,
A new user(employee) is assigned with EDA responsibility to view/update his personal details and bank details.
The user is able to view & update the bank details. But he is not able to open the personal details page. He is getting the following error while trying to access the personal detail link.
HR_BASIC_DETAILS_WEB.GET_READ_ONLY_INFORAMTION: ORA-20002: 3123: Duplicate attribute 'DISPLAY_MARITAL_STATUS' could not be created for item 'HRSSA/28012061'.
All users except the new user, dont have this issue.
Oracle Application Version : 11.5.9
Could someone help me on this.

Hi Girish,
Do you find out the solution to this issue? We having a similar issue with our Enterprise Portal using Apache and Siteminder Agent?

NetStorage encountered an error while trying to access this

Strange problem with NetStorage. If I log in to NetStorage on Server A I get a listing of my drives from my login script and have no problems accessing any of them. If I log in to Server B I also get a listing of my drives and can access all of them except for the drives on Server A. When I try to access them I get the following error: "NetStorage encountered an error while trying to access this location." Anyone have any ideas on what could be causing the problem?
Here's the particulars:
Server A
OES2 sp3 on SLES 10
Internal Network
Server B
OES2 sp1 on SLES 10
DMZ Network
At first I thought this might be a firewall port issue so I had my network guy open ports 80, 443, and 51080 from server B to server A. Didn't fix the problem.
I have been searching the forums for an answer but, have not found one that helps for this situation. Thanks in advance for your help.

Originally Posted by mtracy
Strange problem with NetStorage. If I log in to NetStorage on Server A I get a listing of my drives from my login script and have no problems accessing any of them. If I log in to Server B I also get a listing of my drives and can access all of them except for the drives on Server A. When I try to access them I get the following error: "NetStorage encountered an error while trying to access this location." Anyone have any ideas on what could be causing the problem?
Here's the particulars:
Server A
OES2 sp3 on SLES 10
Internal Network
Server B
OES2 sp1 on SLES 10
DMZ Network
At first I thought this might be a firewall port issue so I had my network guy open ports 80, 443, and 51080 from server B to server A. Didn't fix the problem.
I have been searching the forums for an answer but, have not found one that helps for this situation. Thanks in advance for your help.
So you have NetStorage installed on both Server A and B and if you log in to NetStorage on Server A you can access storage hosted by both Server A and B but if you log in to NetStorage on Server B you can only access storage on Server B?
One obvious comment is that Server B is running an old and now unsupported version of OES2 - the only version of OES2 now supported is OES2 SP3 on SLES10 SP4. Theoretically that shouldn't make a difference but I know that whilst NetStorage may not have visibly changed much over OES versions it has received some bug fixes along the way.
Your comment about firewalls leads me to ask whether that implies you're blocking all the other ports between the two servers? NetStorage uses the XTier framework which in turn uses NCP to access remote servers. NCP uses UDP port 524.
HTH.

"error while trying to access the service"

I am trying to convert a pdf file to an excel file. I get a completely unhelpful message that says "error while trying to access the service" .
What does this mean and how do i fix it?

Hi sd433m,
Thank you for posting on the Adobe forums. If you are already subscribed to the service, kindly try the steps mentioned below.
1) Open Adobe Reader Edit>preferences
2) Go to Adobe Online services>change the email address to the one you have subscribed the service with
3) Go to identity> change the email address there as well
4) Click OK
5) Restart the Adobe Reader and try to access the service again.
If you have not subscribed to the service please do that as, we do not offer trial for Create PDF.
Thanks,
Vikrantt Singh

Error while trying to delete the universe from CMS

Dear All,
I am getting "Unable to reconnect to the CMS XXXXXXXXX. The session has been logged off or has expired" error while trying to delete any universe from the CMS. I tried restarting tomcat but it didnt work. I am unable to delete any universe from CMS. We have BO XI R2 SP2 environment on Windows 2003 Server.
regards,
Umair

SAP NOTE - 1199539 gives a possible solution to this problem:
When attempting to delete or migrate a universe, the following error message appears:
"Unable to reconnect to the CMS BUSOBJDV.ACSAD.NCSU.EDU. The session has been logged off or has expired."
Environment
BusinessObjects Enterprise Premium XI Release 2 SP1 CHF15
JDK version 1.4.2_08
Tomcat version is the same as that shipped with the product
Cause
The universes and connection pages are special (AFAIK) compared to the other pages because they are pure JSP, while most of the other Central Management Console (CMC) pages still go though the CMC and use COM/C++ code unaffected by the Java Virtual Machine (JVM). If the JVM has not been updated against Eastern Daylight Savings Time (EDST), it may calculate the incorrect time locally, and problems may occur with token expiry or validation.
Resolution
Update the Tomcat JDK to JDK 1.5.0_11 for EDST:
1. Go to the Microsoft web site and verify if you have the time zone update installed.
2. Download JDK 1.5.0_11.
3. Install JDK 1.5.0_11 on your server.
4. Modify the JAVA_HOME here:
C:\Program Files\Business Objects\Tomcat\bin\setenv.bat
as follows:
set JAVA_HOME=C: \Program Files\Java\jdk1.5.0_11\jre
5. In Java Virtual Machine and Java Class Path, modify JAVA properties for Tomcat (Start > Programs > Tomcat > Tomcat Configuration > Java). Replace the default Business Objects JDK 1.4 directory:
C:\Program Files\Business Objects\j2sdk1.4.2_08
with JDK 1.5.0_11:
C:\Program Files\Java\jdk1.5.0_11
6. Go to Windows Time Zone (double-click Windows time) then on the Time Zone tab, select the automatically adjust clock for day light saving changes check box against EST time zone.
7. Restart Tomcat and the Central Management Server (CMS) and, if possible, reboot your computer.
Hope this works anyone facing this problem on Windows servers.
Not sure what the solution is for BO instances running on Solaris. We have business objects/Weblogic running on a solaris server. I tried just changing java home to jdk1.5.0_12 but this didn't work.

I keep getting an error while trying to access the service

I keep getting an error while trying to access the service

Can you try to use ExportPDF directly on the website https://cloud.acrobat.com/exportpdf
[topic moved to ExportPDF forum]

MSS error while trying to access Adobe forms

Hi all
We are using EP 7 sp14. Delpoyed ESS/MSS BP SP 14. while trying to access certain functionalities in MSS which make use if standerd Adobe interactive forme through portal its coming up with the following error.
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
I had done few settings in Visual Admin in
1. server >services>web services security>web services clients>sap.com>tcwdpdfobject>com.sap.tc.webdynpro.adsproxy.Adsproxy*configPort_Document.
2. In default URL gave : http://portalserver:port/AdobeDocumentServices/Config
3. Authentication:Basic Authentication : gave username:ADSUSERpwd which is set in the backend.
4. In Deploy stopped and started the application.
Also in Destinations -> Created a new HTTP and set the URL pointing to the backend.
Is there any additional configuration to be set on the Portal side.
Regards,
Sasha.

Got corrected with changing data-type for a property in the definition file.

Error while trying to access dashboards from EPM

Hi
We integrated OBIEE 10.1.3.4 with EPM 11.2 and when we are trying to access dashboards from EPM we are facing the following error : "Invalid or could not find module configuration."
Please , help us in solving the above issue.
Thanks.

Hi all,
The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
In that case, you have to:
1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
Best regards,
Rudolf Hennecke
SAP NetWeaver RIG BI

Error while trying to access repository from Application Explorer

Hi All,
I am trying to access the targets which I had previously created from AE. Everything was working fine. When I tried running iwae.sh script and open the target from AE it throws below error today.
com.iwaysoftware.iwrepository.RepositoryException
at com.iwaysoftware.iwrepository.xml.XMLRepository.end(XMLRepository.java:272)
at com.iwaysoftware.iwrepository.xml.file.FileRepository.end(FileRepository.java:436)
at com.iwaysoftware.iwrepository.xml.XMLQuery.executeQuery(XMLQuery.java:863)
at com.iwaysoftware.af.container.IWAFRepositoryOP.getConfigs(IWAFRepositoryOP.java:167)
at com.iwaysoftware.af.container.IWAFRepositoryStorage.listConfigurations(IWAFRepositoryStorage.java:215)
at com.iwaysoftware.af.container.ChannelManager.listConfigurations(ChannelManager.java:100)
at com.iwaysoftware.af.container.IWAFContainer.listChannelConfigurations(IWAFContainer.java:360)
at com.iwaysoftware.af.container.AEManager.buildChannelList(AEManager.java:252)
Not sure what has changed? Is this a corruption with the repository.xml file ? Is there any way to get around this error.
Regards
Subhankar

Hi all,
The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
In that case, you have to:
1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
Best regards,
Rudolf Hennecke
SAP NetWeaver RIG BI

403 Forbidden Error while trying to access External SharePoint site in SP 2010

I am trying to access external Claims based SP site and trying to download the file from a doc library.
I am receiving the 403 Forbidden error when executing the code.
I am using SP 2010 and Client Object Model.
PFB the code I am running.
using (SPCOM.ClientContext clientContext = ClaimClientContext.GetAuthenticatedContext(siteURL))
if (clientContext != null)
clientContext.Credentials = System.Net.CredentialCache.DefaultNetworkCredentials;
clientContext.Load(clientContext.Web);
clientContext.ExecuteQuery();
SPCOM.Web web = clientContext.Web;
clientContext.Load(web);
clientContext.ExecuteQuery();
using (SPCOM.FileInformation fInfo = SPCOM.File.OpenBinaryDirect(clientContext, item["FileRef"].ToString()))
string fileName = (string)item["FileRef"];
fileName = string.Concat(SaveLocation, fileName.Substring(fileName.LastIndexOf("/") + 1));
//now save it
using (System.IO.FileStream outPutFile = System.IO.File.OpenWrite(fileName))
fInfo.Stream.CopyTo(outPutFile);
fInfo.Stream.Close();
I suspect the OpenBinaryDirect method ,
I am also using Cookie based authentication I guess PFB the code for that.
public static ClientContext GetAuthenticatedContext(string targetSiteUrl)
return (GetAuthenticatedContext(targetSiteUrl, 0, 0));
/// <summary>
/// This method will return a ClientContext object with the authentication cookie set.
/// The ClientContext should be disposed of as any other IDisposable
/// </summary>
/// <param name="targetSiteUrl"></param>
/// <returns></returns>
public static ClientContext GetAuthenticatedContext(string targetSiteUrl, int popUpWidth, int popUpHeight)
CookieCollection cookies = null;
cookies = ClaimClientContext.GetAuthenticatedCookies(targetSiteUrl, popUpWidth, popUpHeight);
if (cookies == null) return null;
ClientContext context = new ClientContext(targetSiteUrl);
try
context.ExecutingWebRequest += delegate(object sender, WebRequestEventArgs e)
e.WebRequestExecutor.WebRequest.CookieContainer = new CookieContainer();
foreach (Cookie cookie in cookies)
e.WebRequestExecutor.WebRequest.CookieContainer.Add(cookie);
catch
if (context != null) context.Dispose();
throw;
return context;
If anyone has an idea of why is this happening, pls help me.
Thanks,
K.V.N.PAVAN

Hi,
Please try to add following line of code before you initialize cookie container.
e.WebRequestExecutor.WebRequest.UserAgent = “Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)”;
http://razirais.wordpress.com/2011/05/19/how-to-fix-sharepoint-online-403-forbidden-error-while-downloading-files-using-client-object-model/
Or change the following line of code
clientContext.Credentials = System.Net.CredentialCache.DefaultNetworkCredentials;
to
clientContext.Credentials=new NetworkCredential("Username", "Passworkd", "Domain");
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Error while trying to access WebService using WSIF

Hi All,
I am a new developer to WebServices. I read up information on how to create the WSDL and stubs using JDev 10g (10.1.2) using the wsa.jar that ships with the download. After creating my WSDL and the necessary proxies, when I try to run my client application (which runs in the same covatiner, standalone OC4j), I get the below error :
06/09/29 13:42:21 org.apache.wsif.WSIFException: org.apache.wsif.providers.ejb.WSIFOperation_EJB@15b0c83 : Could not invoke 'getOrderList'; nested exception is:
org.apache.wsif.WSIFException: Error while determining signature of method getOrderList : The meta information is not consistent.; nested exception is:
org.apache.wsif.WSIFException: parameters
06/09/29 13:42:21 at org.apache.wsif.providers.ejb.WSIFOperation_EJB.executeRequestResponseOperation(WSIFOperation_EJB.java:1259)
06/09/29 13:42:21 at org.apache.wsif.base.WSIFClientProxy.invoke(WSIFClientProxy.java:339)
06/09/29 13:42:21 at $Proxy3.getOrderList(Unknown Source)
I am trying to expose a Stateless Session EJB as a WebService, which contains a method called getOrderList(). This method returns an array of a complex type (Java Bean).
I am, however, able to succesfully access the WebService using the SOAP/HTTP protocol.
My client code is as follows:
WSIFServiceFactory factory = WSIFServiceFactory.newInstance();
WSIFService service = factory.getService("<path to wsdl>", null, null, "http://sample.com/", "OrderService");
orderService = (OrderService) service.getStub("WsifEjb", OrderService.class);
Not sure what am I missing here. If any further information is required in order to resolve this, please let me know.
Thanks,

You are trying to get 2 databases connected... so, you need to insure that FDEV can find and connect to ABCD.
So, from your FDEV database server, you can do 2 things (from command prompt):
1* tnsping ABCD (this will validate that the entry exists in your tnsnames.ora on your FDEV server, and that a valid listener can be found on remote server)
when above command succeeds:
2* sqlplus apps/appsdev@ABCD;
when you have established the connection, then you are SURE that your can connect ABCD database from FDEV database server. It will also validate the username / password combination, create session privilige, account not locked, etc.....
Please check the above, and post here the results.
HTH,
Thierry

Column Not found error while trying to access database through JSP+Java Bea

I am trying to access MS Access 2003 db through JSP using Tomcat 5.0.28.The code for accessing the database is incorporated in the bean.The JSP only calls the particular method of the bean .
Code for Java Bean:
package ActiveViewer;
import java.sql.*;
import java.util.*;
public class CompanyBean
Connection con;
ResultSet rs=null;
Statement st;
public CompanyBean(){}
public void connect()
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
System.out.println("Here4");
con=DriverManager.getConnection("jdbc:odbc:activeviewer","","");
System.out.println("Here1");
catch (ClassNotFoundException e)
System.out.println("Could not locate driver.");
catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
e.printStackTrace();
catch (Exception e)
System.out.println("An unknown Exception has occured :: "+e);
e.printStackTrace();
public void disconnect()
try
if (con!=null)
con.close();
catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
e.printStackTrace();
public ResultSet select(String username)
if(con!=null)
try
st=con.createStatement();
rs=st.executeQuery("select * from company where username='" + username + "'");
catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
e.printStackTrace();
catch (Exception e)
System.out.println("An Exception has occured while retrieving :: "+e);
e.printStackTrace();
else
System.out.println("Connection to database was lost.");
return rs;
The code for JSP that uses the above bean is:
<%@ page language="java" import="java.sql.*,ActiveViewer.* " contentType="text/html"%>
<jsp:useBean id="conn" scope="session" class="ActiveViewer.CompanyBean" />
<html>
<body>
<% String username=request.getParameter("username");
String password=request.getParameter("password");
System.out.println("username:"+username);
System.out.println("password:"+password);
conn.connect();
ResultSet rs=conn.select(username);
System.out.println("Below select ");
while (rs.next())
String dbusername=rs.getString("username");
String dbpassword=rs.getString("password");
if(dbusername.equals(username) && dbpassword.equals (password))
{ %> out.println("OK");
<% }
else { %>Invalid Username and / or Password.
<br>Clickhere to go back to Login Page.
<% }
} %>
</body>
</html>
I get the following error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Column not found
though the database is not int he same folder as the jsp, the DSN is set correctly to pint to the db location.The jsp does print in stdout file:
Here4 (from connect method above)
Here 1 (from connect method above)
Below Select (from jsp)
This means that the jsp does connect to db but it gives the above error.Also the field name also matches that in the database and data is present in the db too.
All other things like creating package for bean in WEB-INF/classes,incorporating the packakage are done.
Can someone please help me with their precious advice?

Hi, I too have a problem with an SQL exception, the message is Column not found.
I'm using the sun jdbc odbc driver with access.
the first few lines of the stack trace are
sun.jdbc.odbc.JdbcOdbcResultSet.findColumn(JdbcOdbcResultSet.java:1852)
sun.jdbc.odbc.JdbcOdbcResultSet.getInt(JdbcOdbcResultSet.java:603)
net.homeip.sdaniels.MemberBean.ejbFindByUnamePwd(MemberBean.java:127)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
I am of course sure that the column does infact exist. I can insert into the column no problems. the sql looks like this:
SELECT * FROM Members WHERE uName ='Stewart' AND encPwd='�F2C�3��h�1Y�'
Can any one tell me if there is a common cause to this problem?
Thanks

Error while trying to access a Repository Item thru ACC

Hi,
I was trying to access a Repository Item from ACC , I am getting this following error :
Error reading list or array index from the database. This means the database table holding this property does not have sequential integers starting with 0 in its multi-column. This should only happen if the database table was modified directly (outside of Dynamo).
java.lang.Exception
at atg.adapter.gsa.ListTable.loadHelper(ListTable.java:190)
at atg.adapter.gsa.ListTable.loadProperties(ListTable.java:97)
at atg.adapter.gsa.GSAItemDescriptor.loadProperties(GSAItemDescriptor.java:5874)
at atg.adapter.gsa.GSAItemDescriptor.loadProperty(GSAItemDescriptor.java:5986)
at atg.adapter.gsa.GSAItem.getPersistentPropertyValue(GSAItem.java:1339)
at atg.adapter.gsa.GSAItem.getPropertyValue(GSAItem.java:1232)
at atg.adapter.gsa.GSAItem.getPropertyValue(GSAItem.java:1510)
at atg.repository.RepositoryItemImpl.getPropertyValue(RepositoryItemImpl.java:151)
at atg.repository.nucleus.RepositoryItemPropertyMapper.getPropertyValue(RepositoryItemPropertyMapper.java:151)
at atg.beans.DynamicBeans.getPropertyValue(DynamicBeans.java:333)
at atg.beans.DynamicBeanState.initializeFrom(DynamicBeanState.java:152)
at atg.beans.DynamicBeanState.<init>(DynamicBeanState.java:122)
at atg.ui.repository.model.RepositoryItemState.<init>(RepositoryItemState.java:428)
at atg.ui.repository.model.RepositoryAgentImpl.createRepositoryItemState(RepositoryAgentImpl.java:2934)
at atg.ui.repository.model.RepositoryAgentImpl.getRepositoryItem(RepositoryAgentImpl.java:3901)
at atg.ui.repository.model.RepositoryAgentImpl.getRepositoryItem(RepositoryAgentImpl.java:1225)
at atg.ui.repository.model.RepositoryAgentImpl.getCompressedRepositoryItem(RepositoryAgentImpl.java:1251)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at atg.security.proxy.UserSessionProxy$SessionSkeletonHandler.invoke(UserSessionProxy.java:273)
at atg.rmi.context.ContextualSkeletonImpl.invoke(ContextualSkeletonImpl.java:127)
at sun.reflect.GeneratedMethodAccessor401.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:303)
at sun.rmi.transport.Transport$1.run(Transport.java:159)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:155)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:790)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:649)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:895)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:918)
at java.lang.Thread.run(Thread.java:662)

Got corrected with changing data-type for a property in the definition file.

Error while trying to access portal

Hi All,
I have installed NetWeaver CE 7.1 in my system. But when i tried to access portal with the url
http://<server name>: <port number>/irj/portal
im getting the following error
Error component failed , reason : Error while retrieving service: com.sap.portal.runtime.system.authentication.authentication Original Exception : Error while retrieving service: com.sap.portal.runtime.system.authentication.authentication
Can anyone tell me what could be the reason for this error and how to resolve this?
Please guide me........
Regards,
Padmalatha.K

HI padmalatha kontham,
If there is no any ignore option in the dilog box, just try to close it and try again. If u get that again, check the portnumber and hostname are correct or not.
there won't be any problem other than that.
example
http://<host>:<port>/irj/portal
Thanks
Suresh

Error while trying to access our inbox from nbwc

Similar Messages

Maybe you are looking for