Error while trying to adjust demand data in /SAPAPO/SPPDMRD

Hello SAP APO gurus,
We are running into the error message "
(Close) realtime data load (DS 9ARAWCRT, QS SCACLNT800, DTA 9ARAWCRT) not started" Message Number /SAPAPO/PDEM119
While trying to change the demand in tcode /SAPAPO/SPPDMRD.
We have looked at OSS Notes 918444 and 967059 and it is not applicable to 7.0.
We have checked the RFC connection and it is correct as well. We are stuck and not able to find out the solution to this issue.
Please advise how we can fix this issue as it is holding up testing,

Hi Vivek,
I have added Master Data in the past as well. Recently this system (Z45) was upgraded and the planning area was re-activated by my Project Lead. After the re-activation i am unable to add any Master Data and Save.
Thanks,
Thahir Masdook

Similar Messages

Error while trying to add Master Data in S&OP

Hi,
I am getting the below error while trying to add new Master Data entries in S&OP. Can anyone help here please? I have added new items in the past, but did not get any error before.
code: MASTER_DATA_OPERATION_EXCEPTION
severity: INFO
description: Error during Stage 02 of Data Integration
log id: 08f6b26e-5981-4e21-ad65-17df697fdc62
I have also attached the screenshot and the new data i am trying to add.
Thanks,
Thahir Masdook

Hi Vivek,
I have added Master Data in the past as well. Recently this system (Z45) was upgraded and the planning area was re-activated by my Project Lead. After the re-activation i am unable to add any Master Data and Save.
Thanks,
Thahir Masdook

Error while trying to Lock the data in Essbase

Hi All,
I am currently facing a issue in Essbase when I am trying to lock the data it shows me the following error message.
Error Encountered is : "You do have sufficient access to perform a lock on this database". I have checked with the administrators / support team and according to them there is nothing wrong with my access. I have the write access to the database and I should be able to lock and send the data but they are unable to figure out why my access is not working or i am facing the above issue. They asked me to select update mode in the essbase options and try but even that didn't work. I am able to make the changes on the same data in Hyperion Planning. I want to lock and send the data directly to server. But I am unable to lock the data. Please expedite.
Thanks a lot for your help in advance.

From your post, it sounds like the problem is not Update mode since you mentioned you tried turning it on (I do not recommend having it on). It does sound like a security issue. Depending on the version, planning and Essbase can use different IDs for the same perosn (If I remember planning used to create two IDs one for planning and one for Essbase) The Essbase id had less access than the planning id did. I would test this by having a test Essbase ID set up that has write access and see if that ID can write directly to Essbase. If it can, I would look at filters and groups the ID is on to see if there is some sort of conflict. I have sen that message when a user had read access to part of the DB and write access to another part, but they were pulling data from the read access section only

Write back error while trying to update the data

This is my writeback.xml file*
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="UpdateBA">
<XML>
<writeBack connectionPool="Oracle Data Warehouse Connection Pool">
<insert> </insert>
<update> UPDATE XXAUD_W_BUD_QTA_F SET BUDGET_AMT=@{c19},attribute2='@{c15}'
where INTEGRATION_ID='@{c6}'</update>
</writeBack>
</XML>
</WebMessage>
<WebMessage name="UpdateQA">
<XML>
<writeBack connectionPool="Oracle Data Warehouse Connection Pool">
<insert> </insert>
<update> UPDATE XXAUD_W_BUD_QTA_F SET QUOTA_AMT=@{c21},ATTRIBUTE3='@{c18}'
where INTEGRATION_ID='@{c6}'</update>
</writeBack>
</XML>
</WebMessage>
<WebMessage name="UpdateFA">
<XML>
<writeBack connectionPool="Oracle Data Warehouse Connection Pool">
<insert> </insert>
<update> UPDATE XXAUD_W_FORECAST_F SET FORECAST_AMT=@{c19},attribute1='@{c22}'
where INTEGRATION_ID='@{c15}'</update>
</writeBack>
</XML>
</WebMessage>
<WebMessage name="UpdatePO">
<XML>
<writeBack connectionPool="Oracle Data Warehouse Connection Pool">
<insert> </insert>
<update> UPDATE XXAUD_W_SALESLOGIN_DTL SET ACTIVE_FLG='@{c2}' WHERE RESOURCE_ID=@{c1}</update>
</writeBack>
</XML>
</WebMessage>
<WebMessage name="UpdateRET">
<XML>
<writeBack connectionPool="Oracle Data Warehouse Connection Pool">
<insert> </insert>
<update> UPDATE XXAUD_W_RET_TARGET_F SET JUL_RET_TAR=@{c3},AUG_RET_TAR=@{c4},SEP_RET_TAR=@{c5},
OCT_RET_TAR=@{c6},NOV_RET_TAR=@{c7},DEC_RET_TAR=@{c8},JAN_RET_TAR=@{c9},FEB_RET_TAR=@{c10},
MAR_RET_TAR=@{c11},APR_RET_TAR=@{c12},MAY_RET_TAR=@{c13},JUN_RET_TAR=@{c14}
WHERE INTEGRATION_ID='@{c0}'</update>
</writeBack>
</XML>
its getting updated at some time but when i tried to update after some time i am getting error
can you please tell me the reason for this???
*An error occurred while writing to the server. Please check to make sure you have entered appropriate values. If the problem persists, contact your system administrator.
Sax parser returned an exception. Message: Expected entity name for reference, Entity publicId: , Entity systemId: , Line number: 1, Column number: 344*
Error Details
Error Codes: UH6MBRBC:E6MUPJPH
Xml parsed: <writeBack template="UpdateQA"><record action="update"><value columnID="c6">ICS_US~1721~15041~1~2009~135</value><value columnID="c7">2009</value><value columnID="c13">2009 / 01</value><value columnID="c17">Specialty</value><value columnID="c15">Carroll, Patrick</value><value columnID="c16">SALES_PERSON</value><value columnID="c12">1st Auto & Casualty Insurance</value><value columnID="c11">ICS_US</value><value columnID="c21">3334</value><value columnID="c18">as</value></record><record action="update"><value columnID="c6">ICS_CAN~1438~15454~1~2009~135</value><value columnID="c7">2009</value><value columnID="c13">2009 / 01</value><value columnID="c17">Specialty</value><value columnID="c15">Barrette, Denis (Denis)</value><value columnID="c16">SALES_PERSON</value><value columnID="c12">AXA Assurances</value><value columnID="c11">ICS_CAN</value><value columnID="c21">147</value><value columnID="c18">fg</value></record></writeBack>

Hi,
i changed my xml by replacing update stmt in <insert> but still facing same problem.
One thing the table with columns customer name, amount,comments.
the customer name have some spl character like *"&"* (john&Franklin).I think this might be a problem(special char &),due to this getting error????
Sax parser returned an exception.
Message: Expected entity name for reference, Entity publicId: , Entity systemId
SAX parsor is not able to read this character???
Help me out!!!
Thanks,
Varanasi Saichand

OBIEE ERROR WHILE TRYING TO RETRIVE THE DATA FROM ESSBASE SOURCE

Hi All,
We have build Essbase ASO Cube and generating the reports through OBIEE.
While we are trying to reteive data with 5-6 dimensions we are getting below error.
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 96002] Essbase Error: Internal MDX API error: invalid cluster offsets (HY000)
SQL Issued: SELECT 0 s_0, "Test Script - Metrics"."Application Details"."Application Full Name" s_1, "Test Script - Metrics"."Application Details"."Tech Executive" s_2, "Test Script - Metrics"."Application Details"."Three Dot Hierarchy" s_3, "Test Script - Metrics"."H0_Ini_Org_Appl"."H0 Initiative" s_4, SORTKEY("Test Script - Metrics"."Application Details"."Application Full Name") s_5, SORTKEY("Test Script - Metrics"."Application Details"."Tech Executive") s_6, SORTKEY("Test Script - Metrics"."Application Details"."Three Dot Hierarchy") s_7, "Test Script - Metrics"."Script Metrics (Historical Trending)"."OverallTotal" s_8 FROM "Test Script - Metrics"
Any Help is appreciated
Thanks,
Reddy

Thanks Deepak.However users dont want to apply any filter.
Any settings needs to be done for Essbase cube as source.
Thanks,
SatyaB

Getting error while trying to upload the data in excel from SSIS package through sql agent job

We are getting below errors.
Error:
The Microsoft Jet database engine cannot open the file '\\serversdev\Documents\QC Files\Prod.xls'. It is already opened exclusively by another
user, or you need permission to view its data.
Please suggest ASAP
Regards,
Ramu
Ramu Gade

Hi Dikshan Gade,
According to your description, you want to upload data from excel to database, when you call ssis package through SQL Server Agent job, you got the error message.
To troubleshoot the problem, please refer to the following steps:
Validate that the account has permissions on the file and the folder.
Verify that the file and the data source name (DSN) are not marked as Exclusive.
Make sure SQL Server Agent Services service account has the permission to access the database.
We can check SQL Server Agent’s activity logs, Windows Event logs and SSIS logs to get more clues. Also the tool Process Monitor is helpful to track the cause of registry or file access related issues. For more information about the issue, please refer to
the following KB article:
http://support.microsoft.com/kb/306269
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Error While trying to Convert a Date Value to string in POI API (Excel)

Hi
How can I convet a date value in excel to string value ? I am using POI API for excel sheet reading in JSP .

Hello Esther,
the problem seems to be that the temp folder of the target Integration Builder system can't be found:
'The system cannot find the path specified
at [..] FileAccess.getTempDirectory([..])'.
You'll experience the same problem if you try a file based import or export within the Integration Builder directly.
I would recommend to continue the search there. You could check if the environment variables (for Windows: TEMP and TMP) of the OS of the system with the target Integration Builder to an existing path. Check also if the WebAs can access this path.
Good luck
Frank

Error while trying to log into dealer portal - Organisational data not main

Error while trying to log into dealer portal - Organisational data not maintained. This is happening for a specific user.
This information is used in the URL for the VMS dealer portal.
<Protocol>://< Host Name>:<Port>/sap/bc/bsp/sapdii/dwb/c_vms_main.do?sap-client=<Client number>
Does anyone have any experience of similar problem ?

so why are you posting this to Oracle database forum?
I see nothing involving the database.

Getting Incorrect data type error while trying to do a CAST in table

Getting an error while trying to compile the following piece of code
CREATE OR REPLACE PACKAGE BODY A_pkg AS
FUNCTION A(O_error_message IN OUT varchar2)
RETURN BOOLEAN IS
--Declaring the local variables and CURSORs used in the program unit
L_attrib_tbl CFA_SQL.TYP_attrib_tbl;
cursor c1 is
select list_first1.number_11
from TABLE (CAST (L_attrib_tbl AS "CFA_SQL.TYP_attrib_tbl")) list_first1;
BEGIN
L_group_id = '22'
IF L_merch_type_value = 'G' OR L_merch_type_value = 'I' THEN
CFA_SQL.QUERY_ATTRIB(L_attrib_tbl,
L_group_id) ;
END IF;
open C1;
Fetch C1 into L_number;
close C1;
return true;
END A;
END;
Also pasting the Spec for CFA_SQL which contains TYP_attrib_tbl
TYPE TYP_attrib_rec IS RECORD
group_id CFA_ATTRIB_GROUP.GROUP_ID%TYPE,
varchar2_1 VARCHAR2,
number_11 number(10,0));
TYPE TYP_attrib_tbl is TABLE of TYP_attrib_rec INDEX BY BINARY_INTEGER;
The error is coming in the line
cursor c1 is
select list_first1.number_11
from TABLE (CAST (L_attrib_tbl AS "CFA_SQL.TYP_attrib_tbl")) list_first1;
with the error as Invalid data type pointing to CFA_SQL.TYP_attrib_tbl as invalid, but I have initialized L_attrib_tbl as of that datatype only. Ahy help would be greatly appreciated.
Regards,
Joydeep

Hi Kelly,
There is no data that is entered in that period.The data will be entered for that period next month.
POV is also not set to that period,but still the problem persists.
Thanks

Error while trying to start Enterprise manager(Data Base Control)

We are getting error while trying to start the EM Database Control in database 11g (11.1.0.6).The error is given below.
#emctl start dbconsole
OC4J Configuration issue. /user1/oracledb/app/testdb/product/11.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_appvserver.rssoftware.com_ORCL not found.
How to resolve this issue?
Regards,
Rup

Check here:
OC4J Configuration issue.
http://arjudba.blogspot.com/2008/04/troubleshooting-dbconsole-error-oc4j.html
HTH
-Anantha

Solution for "Error while trying to synchronize Audio and MIDI" and "System Overload" messages

Article for those who hate Logic error windows
Seen in Logic Pro 9.1.7 on Mac OS X Lion 10.7.4
and Logic Pro 9.0.0 on Mac OS X Snow Leopard 10.6.5
Logic Pro:
System Overload.
The audio engine was not able to process all required data in time.
(-10011)
Error while trying to synchronize Audio and MIDI.
Sample Rate xxxxx recognized.
Check conflict between Logic Pro and external device.
The search in the help given as follows: overload occurs when you use a lot of tracks and a lot of effects on them, and the synchronization is lost when the selected MIDI track for recording or playback. Yes, this is all that is written in the resources. And here are useful tips that have been found:
The Bounce function allows the entire instrument track to be recorded as an audio file. This bounced audio file can then be used (as an audio region) on a standard audio track, allowing you to reassign the available processing power for further software instrument tracks. For more details, see "Bouncing Your Project."
You can also make use of the Freeze function to capture the output of a software instrument track, again saving processing power. For details, see "Freezing Tracks in the Arrange Area."
These tips - about the timing. About overload - there are no tips, except as "reducing the number of plug-ins" and "increasing latency". Zero useful tips - I got two errors in the test project with a blank audio track with no effects, MIDI drums and standard synthesizer, it was no aux buses, and the entire project was only a single plugin in the master track.
Here is the configuration of my computer:
iMac12, 2
CPU: Intel Core i5 3,1 GHz
Memory: 4 GB
And here's a project that almost immediately stops Logic, all instruments and plug-ins with the init-patch, ie not the most demanding settings:
It's sad.
When this happened the first time, I could start the project only if the empty audio track has been selected, a track specially designed so that you can at least start the project. Then, this problem has evaporated along with the changing conditions of work and I forgot about it until the last case.
I was looking for the cause of the problem in the console and the system monitor for two days, and finally I found that Logic ping to the network frequently. I remembered the exact time of occurrence of the problem, and system logs revealed that the problems began immediately, as soon as I deactivate the service of the Internet.
Solution: enable the Internet, or add a new network service on a computer with no Internet. I just created the Ethernet connection to the ip address 1.0.0.0
Logic immediately began to sing.

Hi gabaghoul
Yes, it worked for me on four different OS and Logic versions (10.6 - 10.8 and 9.0 - 9.1.6)
It does not work in some cases, hard enough to tell in which one, but you can try, it very easy: go to the net settings and create new Ethernet connection to the ip address 1.0.0.0 and connect LAN cable to the port.
Also you can try to figure out what happens in your system while Logic error occured - fot that you just start Console and search "logicpro"
Pay attention to repetitive events in a console and events with suitable timing, not so far from error
The problem may be related to the GUI or system memory, sometimes turning off Safari (or Chrome, others browsers) might help.
Message was edited by: spred

Error while trying to retrieve text for error ORA-12154

Hello,
I try to install php 5.1.2 on a WIN2003 server and IIS6 with the OCi8 extension without success from several days.
On my server I've a 920 oracle client and the 10.1 instant client, I copy the tnsnames.ora in the instant client's directory.
I've declare many environnement variables :
- NLS_LANG : AMERICAN_AMERICA.WE8MSWIN1252
- TNS_ADMIN : E:\...\oracle\instantclient_10_1
- ORA_NLS33 : E:\..\oracle\920\ocommon\nls\ADMIN\DATA
With the php command line the oci_connect function correctly works : the php command line use the instant client's tnsnames.ora. I can query with success my database.
When I try to load a web php script (the same as the php command line script) I have the following error " Error while trying to retrieve text for error ORA-12154" ( oci_connect( $user , $pass, $sid ) . The $sid variable have the value of an alias declared in the tnsnames.ora.
If I replace the sid's alias by something like this " (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xx.xx.xx.xx)(PORT=1521)))(CONNECT_DATA=(SID=xx)" in the oci_connect function, I have another error : Error while trying to retrieve text for error ORA-12705.
A web page with the phpinfo function displays the following messages about oci8 extension : It seems to be correct.
oci8
OCI8 Support enabled
Revision $Revision: 1.269.2.8 $
Active Persistent Connections 0
Active Connections 0
Temporary Lob support enabled
Collections support enabled
Do you have any idea ? Thanks a lot

The web server is not seeing the Oracle environment correctly. You need to set PATH to the instant client libraries. ORA_NLS33 is not used for Oracle 10g clients. Perhaps you have some library conflict with two versions of Oracle on the machine?
These may help:
http://www.oracle.com/technology/tech/php/htdocs/php_troubleshooting_faq.html#envvars
http://blogs.oracle.com/opal/2006/05/01

Trying to setup new iCloud in system preferences and get error message: "iCloud encountered an error while trying to connect to the server."

Here's the sequence of events:
Setting up a new iMac.
Migration Assistant was aborted during setup and a normal setup was completed.
Then ran Migration Assistant from the newly setup account.
It ran fine, but put all the data in a new account called "user".
Renamed "user" to a new name, renamed the home folder to a new name following these instructions: OS X: How to change your account name or home directory name
Delete the account we originally created, so just have one account with the name we want and all the data, email. Works fine.
Sign into the App Store with the account we share for purchases.
Now, the problem:
Go to System Preferences to setup iCloud with a new Apple ID
Get this error: "iCloud encountered an error while trying to connect to the server."
So I'm unable to setup iCloud for photo stream, FaceTime, etc.
Internet works fine, we can get mail, etc.
Rebooting doesn't help
Ideas?

never mind the problem is gone this morning.

Error while trying to synchronise audio and midi

Hi
Logic worked all day and suddenly start giving this message:
error while trying to synchronise audio and midi.
Nothing was changed and we also have no sound.
We don't have any midi device, its just the G5 and Logic installed.
Any idea how to solve this issue.
Jeanne

Howdo
Someone else has been having this problem and I've tried to help 'cos it used to happen to me too. Try adjusting your I/O buffer level in your Logic Audio Driver preferences - raise it a bit higher and the problem should go away. Problem is you get more latency. (I'm assuming it's set lower than 512, but not knowing your audio hardware... and your not using internal audio are you???)

Error while trying to activate REPLICATE

Hi Experts,
I am getting below error while trying to Replicate Data Source.Can you please help on this-
Error analysis
    Short text of error message:
    Unable to read RFC destination WORKFLOW_LOCAL
    Long text of error message:
    Technical information about the message:
    Message class....... "SWF_RUN"
    Number.............. 617
    Variable 1.......... "WORKFLOW_LOCAL_010"
    Variable 2.......... "RFC_READ_DESTINATION_TY
    Variable 3.......... "DESTINATION_NOT_EXIST"
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "CL_SWF_RUN_WIM_LOCAL==========CP" or "CL_SWF_RUN_WIM_LOCAL==========CM07Z"
    "IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER"
Please help.
Thanks in advance
Nilesh

It's purely connectivity problem .. make sure login credentials are correct! it should allow remote logon from R/3 to BI and vice versa
Please follow the doc..
http://help.sap.com/bp_bw370/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc

Error while trying to adjust demand data in /SAPAPO/SPPDMRD

Similar Messages

Maybe you are looking for