Error while trying to assign a role via CUP in Portal

Hello Experts,
I am trying to create a request to assign a role in EP via CUP ( 5.3)
EP Connector is working fine as I have imported Portal roles etc
SPML service is working fine
I have done the mapping in the Provisioning tab for Portal system
logonname in portal is email address of an employee
So the I have done the following mapping
AC Field Application field
email addres-Stndard logonname
And I have the following error while trying to create a request which I grabbed form the log
ERROR Exception during EJB call, Ignoring and trying Webservice Call
LinkageError: loader constraints violated when linking com/virsa/cc/xsys/webservices/dto/WSRAInputParamDTO class
ERROR com.virsa.ae.core.BOException: Exception from the service : Invalid System
com.virsa.ae.core.BOException: Exception from the service : Invalid System
ERROR : BO Exception in Save request
Any suggestions would be really appreciated
Regards
Kev

Kevin,
I was able to replicate your issue and there is a setting in the CUP that you have to disable, Goto the config tab in the CUP and select NO for the "Risk Analysis On Request Submission " under risk analysis.
Issue here is you did not create a connector for your EP in the RAR, I believe you have the above mentioned parameter to yes and so when you are submitting a request CUP is trying to do the risk analysis but RAR was not able to find any System, so it is thowing an error.
You can resolve this issue in two ways, one is to create a connector in RAR or the other is to disable the setting in the CUP.
Hope this helps.
Naveen

Similar Messages

Error while trying to assign an empty value

Hi ,
In my bpel process i get an error while trying to assign an empty output to a variable. It occurs in assign activity copy operation. What can i do? How can i skip this? Sometimes there may be null /empty values ...below is the error message
Error in evaluate <from> expression at line "146". The result is empty for the XPath expression : "/ns5:getAccessSwitchResponse/SwitchPortInfo/SwitchID
Thanks in advance
Edited by: Turkmen Mustafa on 27.Haz.2011 04:08

Hi,
No it is not possible. However this issue is resolved in SOA Suite 11g PS3. Where it uses BPEL WS 2.0 standards.
Edited by: user9285225 on Jun 27, 2011 4:42 AM

Error while trying to publish 2013 workflow via designer. Probably a workflow manager backend user account issue?

Hello, I am getting error while publishing the 2013 workflow via designer. Also, under sharepoint designer if I try to delete any workflow then the page just refreshes and the workflow does not get deleted.
I checked the services.msc and found that the workflow backend service was stopped. (this happened as the password of the user under which this serivce was running had changed).
So, the network admin changed the service user to LOCAL SYSTEM and started the service.
Now, the workflow backend service is started. We have run the iisreset also.
However, I am still getting the same error:-
System.IO.InvalidDataException: A response was returned that did not come from the Workflow Manager. Status code = 503:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>Service Unavailable</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD>
<BODY><h2>Service Unavailable</h2>
<hr><p>HTTP Error 503. The service is unavailable.</p>
</BODY></HTML>
Client ActivityId : ee94689c-4e08-b055-fe9c-268d7a94
Please find attached snapshot.
Is the error as a result of the change in service user? Can you tell me what priviledges should the account running the workflow backend service must have?
UPDATE 1:-
We have set the workflow service backend account user as farm admin and also tried to set it to site admin. The service is re-started. Now, for a new web application,
I can delete workflows. However, for existing site, I am not able to delete the existing workflows.. Also, I am not able to publish workflows (present under new and previous sites) and the error is same as described earlier.

Hi Nachiket,
According to your description, my understanding is that you got an error while publishing the 2013 workflow via SharePoint 2013 Designer.
As you have changed the password of this service. Please open IIS and make sure identify of the WorkflowMgmtPool is correct, you can re-type the identify. Then make this pool is started.
Open Services, find Service Bus Message Broker service and Windows Fabric Host Service. Make sure they are running. If not, firstly, start Windows Fabric Host Service, then start Service Bus Message Broker service. If Service Bus Message Broker service is
started, stop and re-start it.
Here are some similar posts for you to take a look at:
http://developers.de/blogs/damir_dobric/archive/2012/10/23/deploying-sharepoint-workflows.aspx
http://developers.de/blogs/damir_dobric/archive/2012/09/18/servicebus-message-broker-service-is-starting-and-starting.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Error while trying to assign an output type to medium external send in smar

Hi,
My requirement is to send a smartform through e-mail as PDF attachment.I have made the changes in the print program of the smart form.When I try to assign the output type to the medium external send in vt02n transaction,it is being saved but it is showing the status as 'not processed'.When I check the processing log it is showing 'Please maintain a output device in your user master data'.But I am able to send the mail and open the attachment.When I try to assign the same o/p type to medium special function,this is being successfully processed .Why am I getting error when I try to assign theo/p type to external send?
Regards,
Hema

Check the logic in the entity adapter ENT_Prov_Permitted_Resources.
This adapter is causing problems when you are trying to assign the resource.

Error while trying to assign an o/p type to medium external send in smartfo

Hi,
My requirement is to send a smartform through e-mail as PDF attachment.I have made the changes in the print program of the smart form.When I try to assign the output type to the medium external send in vt02n transaction,it is being saved but it is showing the status as 'not processed'.
When I check the processing log it is showing 'Please maintain a output device in your user master data'.But I am able to send the mail and open the attachment.
When I try to assign the same o/p type to medium special function,this is being successfully processed .Why am I getting error when I try to assign theo/p type to medium external send?
Regards,
Hema

Well ok, think i don't need it anymore. thx anyways...

Dvm error while trying to assign dvm value to a variable using Assign

<bpelFault><faultType>0</faultType><subLanguageExecutionFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is dvm:lookupValue('S:/JDeveloper/mywork/GPRDSecurityLevelDataRouterApp/GPRDSecurityLevelDataRouter/EnterpriseAppSecurityLevels.dvm','SecurityLevel','1','EnterpriseAppQueueName',''). The XPath expression failed to execute; the reason was: internal xpath error. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. </summary></part><part name="code"><code>XPathExecutionError</code></part></subLanguageExecutionFault></bpelFault>
Kindly help identifying the issue here.
Regards,
Sridhar.

It worked when I used this
dvm:lookupValue('EnterpriseAppSecurityLevels.dvm','SecurityLevel','1','EnterpriseAppQueueName','Default')
instead of this
dvm:lookupValue('S:/JDeveloper/mywork/GPRDSecurityLevelDataRouterApp/GPRDSecurityLevelDataRouter/EnterpriseAppSecurityLevels.dvm','SecurityLevel','1','EnterpriseAppQueueName','')

Getting error while trying to install ADRMS role on Windows Server 2008 R2 SP1.

Hello,
I am trying to install ADRMS on Windows Server 2008 R2 SP1 (This machine also has domain controller and Exchange Server 2010 SP3 installed). But I am getting following error:
Install-ADRMS : The configuration object is read only, because it has been committed by a call to ServerManager.CommitChanges().
If write access is required, use ServerManager to get a new reference. at Microsoft.Web.Administration.Configuration.SetDirty()
Not sure what is causing this error. Any help to solve it would be appreciated.
Thanks.
Jigar Mehta

Hello,
I am trying to install ADRMS on Windows Server 2008 R2 SP1 (This machine also has domain controller and Exchange Server 2010 SP3 installed). But I am getting following error:
Install-ADRMS : The configuration object is read only, because it has been committed by a call to ServerManager.CommitChanges().
If write access is required, use ServerManager to get a new reference. at Microsoft.Web.Administration.Configuration.SetDirty()
Not sure what is causing this error. Any help to solve it would be appreciated.
Thanks.
Jigar Mehta

Error while trying to load Crystal report via Windows service

Hi,
I am trying to generate PDF file using crystal reports. I have developed a console application which works absolutely fine, however when I converted the code to work as windows service (wcf hosted in Windows service), this below error I see from stack trace:
Load report failed.
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at AtDataWindowsService.GetData.generatePDF(DataTable dt)
The code used is:
CrystalDecisions.Shared.ExportFormatType exportFormat;
ReportDocument reportObj = new ReportDocument();
exportFormat = CrystalDecisions.Shared.ExportFormatType.PortableDocFormat;
//Load the Crystal Report
reportObj.Load("CrystalReport.rpt");
reportObj.SetDataSource(dt);
What might be going wrong here?

Hello,
Thank you for your post.
Based on your description, I am afraid that the issue is out of support of VS General Question forum which mainly discusses
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I suggest that you can consult your issue directly on SAP Crystal Reports:
http://scn.sap.com/community/crystal-reports/content?filterID=content~objecttype~objecttype[thread]
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error while trying to set system role.

Hi all,
Me stuck up with an issue. Look at the code below.
RMResource newResource = session.getAuthentication().getGroup("<GroupName>");
RoleAccessor newAccessor =
session.getAuthorization().createRoleAccessor(newResource);
Role file_access_role = session.getAuthorization().getRoleByName("View");
newAccessor.setSystemRole(file_access_role);
If i execute the above code, I am getting the below exception.
com.sqribe.rm.ReportMartException: Not a Non-Adaptive-State System Role: Try setAdaptiveStateRole().
Below given are the Adaptive-State system Roles.
View Only
View and Process
Analyze
Analyze and Process
Query and Analyze
Datamodel and Analyze
If i try to substitute "View" with any 1 of the roles given above also, I face the same issue. Any light on this issue will be of great help.
Regards

After much ado, I contacted Apple and they told me to perform the following steps to deal with the Rights and Pricing dilemma. Choose just one country, then submit book. After everything is accepted, sign in to iTunes Connect, Manage Your Books, choose your title with an incomplete rights/pricing list, then in the upper right hand corner of the page that appears, select the blue button, "Rights and Pricing". There you can add the rest of the countries without a hitch!

Error while trying to open an added backend system in portal

Hi All,
I need one help.
I have added our Backend SAP SRM system in the Enterprise portal and it worked good.
But now if I try to open the added SRM system in the below path
System Administration à System Configuration à System Landscape -> portal contents -> system backends -> MY SRM(added system)
I am facing the error page cannot be displayed error as below
The page cannot be displayed
Explanation: There is a problem with the page you are trying to reach and it cannot be displayed.
Try the following:
u2022     Refresh page: Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion.
u2022     Check spelling: Check that you typed the Web page address correctly. The address may have been mistyped.
u2022     Access from a link: If there is a link to the page you are looking for, try accessing the page from that link.
Technical Information (for support personnel)
u2022     Error Code: 500 Internal Server Error. The request was rejected by the HTTP filter. Contact the server administrator. (12217)
Please help me to solve it, Thanks a advance.
Thanks,
Senthil

Hi,
Are you using any webdispatcher or some proxy? Is there any URL filter configured in between?
If yes then I think you have to allow these pages.
Regards,
Vamshi.

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

Error while trying to create new assignment with supervisor through API

Hi Experts,
I'am trying to create new assignment with supervisor for employee, but i'am facing this error:
=============================================================
ORA-20008: Error While Create new assignment..-20001
ORA-20001: The supervisor assignment that you have entered is invalid.
Please check that you have entered the supervisor,
that the supervisor assignment belongs to this supervisor and that the assignment is effective.
ORA-06512: at line 198
=============================================================
This is my script, (Oracle EBS 12.1.1)(DB 11):
DECLARE
v_user_id NUMBER;
v_res_id NUMBER;
v_res_appl_id NUMBER;
v_org_now_no_manager_warning BOOLEAN;
v_spp_delete_warning BOOLEAN;
v_other_manager_warning BOOLEAN;
v_tax_district_changed_warning BOOLEAN;
v_entries_changed_warning VARCHAR(4000);
v_person_id per_all_assignments_f.person_id %TYPE;
v_business_group_id hr_all_organization_units_tl.organization_id %TYPE;
v_people_group_id per_all_assignments_f.people_group_id %TYPE;
v_object_version_number per_all_assignments_f.object_version_number %TYPE;
v_special_ceiling_step_id per_all_assignments_f.special_ceiling_step_id %TYPE;
v_group_name pay_people_groups.group_name %TYPE;
v_ass_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
v_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
v_effective_end_date per_all_assignments_f.effective_end_date %TYPE;
v_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_sup_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_supervisor_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_job_id per_jobs.job_id %TYPE;
v_grade_id per_grades.grade_id %TYPE;
v_location_id hr_locations_all.location_id %TYPE;
v_payroll_id pay_all_payrolls_f.payroll_id %TYPE;
v_pay_basis_id per_pay_bases.pay_basis_id %TYPE;
BEGIN
v_user_id := FND_GLOBAL.user_id ;
v_res_id := FND_GLOBAL.resp_id ;
v_res_appl_id:= FND_GLOBAL.resp_appl_id;
FND_GLOBAL.apps_initialize(v_user_id, v_res_id, v_res_appl_id);
BEGIN
SELECT organization_id
INTO v_business_group_id
FROM hr_all_organization_units_tl
WHERE name = 'Vision University'
AND language = 'US';
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20000,'Error While Retrieving (Business Group ID) Info...'||SQLCODE||' '||SQLERRM);
END;
FOR R IN (SELECT * FROM xx_assignment) LOOP
BEGIN
SELECT assignment_id , ass_f.object_version_number
INTO v_assignment_id , v_object_version_number
FROM per_all_assignments_f ass_f, per_all_people_f p_f
WHERE ass_f.person_id = p_f.person_id
AND ass_f.business_group_id = p_f.business_group_id
AND ass_f.business_group_id = v_business_group_id
AND p_f.employee_number = R.employee_number
AND TRUNC(p_f.effective_start_date)= TRUNC(ass_f.effective_start_date)
AND TRUNC(p_f.effective_end_date) = TRUNC(ass_f.effective_end_date);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001,'Error While Retrieving (Assignmet_ID) for employee..'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT job_id
INTO v_job_id
FROM per_jobs
WHERE trim(lower(name)) = trim(lower(r.employee_job))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20002,'Error While Retrieving (Job_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT grade_id
INTO v_grade_id
FROM per_grades
WHERE trim(lower(name)) = trim(lower(r.employee_grade))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20003,'Error While Retrieving (Grade_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT location_id
INTO v_location_id
FROM hr_locations_all
WHERE trim(lower(description))= trim(lower(r.employee_location))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20004,'Error While Retrieving (Location_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT payroll_id
INTO v_payroll_id
FROM pay_all_payrolls_f
WHERE trim(lower(payroll_name)) = trim(lower(r.payroll_name))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20005,'Error While Retrieving (Payroll_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT pay_basis_id
INTO v_pay_basis_id
FROM per_pay_bases
WHERE trim(lower(pay_basis)) = trim(lower(r.pay_basis))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20006,'Error While Retrieving (Pay_Basis_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT person_id
INTO v_person_id
FROM per_all_people_f
WHERE employee_number = r.supervisor_number
AND business_group_id= v_business_group_id;
SELECT assignment_id
INTO v_sup_assignment_id
FROM per_all_assignments_f
WHERE person_id = v_person_id
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20007,'Error While Retrieving (Assignmet_ID) for supervisor..'||SQLCODE||' '||SQLERRM);
end;
BEGIN
hr_assignment_api.update_emp_asg_criteria(p_effective_date => TRUNC(SYSDATE),
p_datetrack_update_mode => 'CORRECTION',
p_assignment_id => v_assignment_id,
p_validate => FALSE,
p_called_from_mass_update => NULL,
p_grade_id => v_grade_id,
p_position_id => NULL,
p_job_id => v_job_id,
p_payroll_id => null,--v_payroll_id,
p_location_id => v_location_id,
p_organization_id => v_business_group_id,
p_pay_basis_id => v_pay_basis_id,
p_segment1 => NULL,
p_segment2 => NULL,
p_segment3 => NULL,
p_segment4 => NULL,
p_segment5 => NULL,
p_segment6 => NULL,
p_segment7 => NULL,
p_segment8 => NULL,
p_segment9 => NULL,
p_segment10 => NULL,
p_segment11 => NULL,
p_segment12 => NULL,
p_segment13 => NULL,
p_segment14 => NULL,
p_segment15 => NULL,
p_segment16 => NULL,
p_segment17 => NULL,
p_segment18 => NULL,
p_segment19 => NULL,
p_segment20 => NULL,
p_segment21 => NULL,
p_segment22 => NULL,
p_segment23 => NULL,
p_segment24 => NULL,
p_segment25 => NULL,
p_segment26 => NULL,
p_segment27 => NULL,
p_segment28 => NULL,
p_segment29 => NULL,
p_segment30 => NULL,
p_employment_category => NULL,
p_concat_segments => NULL,
p_grade_ladder_pgm_id => NULL,
p_supervisor_assignment_id => v_sup_assignment_id,
p_people_group_id => v_people_group_id,
p_object_version_number => v_object_version_number,
p_special_ceiling_step_id => v_special_ceiling_step_id,
p_group_name => v_group_name,
p_effective_start_date => v_ass_effective_start_date,
p_effective_end_date => v_effective_end_date,
p_org_now_no_manager_warning => v_org_now_no_manager_warning ,
p_spp_delete_warning => v_spp_delete_warning,
p_entries_changed_warning => v_entries_changed_warning,
p_tax_district_changed_warning => v_tax_district_changed_warning,
p_other_manager_warning => v_other_manager_warning);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20008,'Error While Create new assignment..'||SQLCODE||' '||SQLERRM);
END;
END LOOP;
COMMIT;
END;
Thank you & Best Regards

I think this is essentially saying that the Supervisor Assignment is wrong or no longer effective. Looking at your SQL to fetch the Supervisor Assignment there are a number of potential issues. This is what you've currently got:
SELECT person_id
INTO v_person_id
FROM per_all_people_f
WHERE employee_number = r.supervisor_number
AND business_group_id= v_business_group_id;
SELECT assignment_id
INTO v_sup_assignment_id
FROM per_all_assignments_f
WHERE person_id = v_person_id
AND business_group_id = v_business_group_id;
Potential Problems/Clarifications
1. What is r.supervisor_number, what does it contain and how is it derived? I can't see that anywhere else in the block...
2. Is there a chance that r.supervisor_number is referencing an employee who has left, ie, now an ex-employee?
3. The SELECT statement that fetches the assignment_id does not perform any date-effective restrictions, which means you might be lucky enough to fetch the person's current assignment. But you might also fetch an old or future-dated assignment.
4. The SELECT statement that fetches the assignment_id does not restrict the type of assignment, so if this manager has applied for a job (ie, they have an applicant assignment) or some other type of non-employee assignment you might be picking that up.
This would work better for you:
SELECT paaf.assignment_id
INTO v_sup_assignment_id
FROM per_all_people_f papf
,per_all_assignments_f paaf
WHERE papf.employee_number = r.supervisor_number
AND papf.business_group_id = v_business_group_id
AND nvl(papf.current_employee_flag, 'N') = 'Y'
AND trunc(sysdate) BETWEEN
papf.effective_start_date AND papf.effective_end_date
AND papf.person_id = paaf.person_id
AND paaf.assignment_type = 'E'
AND paaf.primary_flag = 'Y'
AND trunc(sysdate) BETWEEN
paaf.effective_start_date AND paaf.effective_end_date;
If it doesn't return a row it means that the supervisor (or whatever employee is returned by r.supervisor_number) is not active as at sysdate and cannot be used. Note that this SQL only applies for employees. If you can have Contingent Workers as supervisors in your implementation then this needs tweaking.
Does that help?

Error while trying to save a crystal report via the Add-ins

Hi All,
I'm getting an error while trying to save the crystal report after I have opened it from the SAP.
When I'm trying to save the report via the Add-ins I'm getting the next error :
Unknown error accured failed to get the internal key of the current user.
Thanks for your help,
Eyal

Hi Eyal,
Even though you posted your 1st message couple of month ago, I would still say welcome you to post on the forum.
What is your B1 version and PL?
Thanks,
Gordon

NotSerializable error while trying to write arraylist

I am getting a NotSerializable error while trying to write an arraylist to a file.
Here's the part of the code causing problem
File temp = fileOpenerAndSaver.getSelectedFile(); // fileOpenerAndSaver is a JFileChooser object which has been created and initialized and was already used to select a file with
currentWorkingFile = new File (temp.getAbsolutePath() + ".gd");      // currentWorking file is a file object
try
     ObjectOutput output = new ObjectOutputStream (new BufferedOutputStream(new FileOutputStream(currentWorkingFile)));
     output.writeObject(nodeList); // <-- This is the line causing problem (it is line 1475 on which exception is thrown)
     output.writeObject(edgeList);
     output.writeObject(nodesWithSelfLoop);
     output.writeObject(nextId);
     output.writeUTF(currentMessage);
     output.close();
catch (Exception e2)
     JOptionPane.showMessageDialog (graphDrawer, "Unknown error writing.", "Error", JOptionPane.ERROR_MESSAGE);
     e2.printStackTrace();
} As far as what nodeList is -- it's an arraylist of my own class Node which has been serialized and any object used inside the class has been serialized as well.
Here is the declaration of nodeList:
     private ArrayList <Node> nodeList; // ArrayList to hold a list all the nodesLet me show you whats inside the node class:
private class Node implements Serializable
     private static final long serialVersionUID = -4625153386839971250L;
     /* edgeForThisNodeList holds all the edges that are between this node and another node
      * nodesConnected holds all the nodes that are connected (adjacent) to this node
      * p holds the top left corner coordinate of this node. The centre. of this node is at (p.x + 5, p.y + 5)
      * hasSelfLoop holds whether this node has a self loop.
      * **NOTE**: ONLY ONE SELF LOOP IS ALLOWED FOR A NODE.
     ArrayList <Edge> edgeForThisNodeList = new ArrayList <Edge> ();
     ArrayList <Node> nodesConnected = new ArrayList <Node> ();
     Point p;
     boolean hasSelfLoop = false;
     int index = -1;
     BigInteger id;
                 ... some methods following this....
}Here is the edge class
private class Edge implements Serializable
     private static final long serialVersionUID = -72868914829743947L;
     Node p1, p2; // The two nodes
     Line2D line;
      * Constructor:
      * Assigns nodes provided as appropriate.
      * Also calls the addEdge method on each of the two nodes, and passes
      * "this" edge and the other node to the nodes, so that
      * this edge and the other node can be added to the
      * data of the node.
     public Edge (Node p1, Node p2)
          this.p1 = p1;
          this.p2 = p2;
          line = new Line2D.Float(p1.p.x+5,p1.p.y+5,p2.p.x+5,p2.p.y+5);
          p1.addEdge(this, p2, true);
          p2.addEdge(this, p1, false);
     }Here is the error I am getting:
java.io.NotSerializableException: javax.swing.plaf.metal.MetalFileChooserUI
     at java.io.ObjectOutputStream.writeObject0(Unknown Source)
     at java.io.ObjectOutputStream.defaultWriteFields(Unknown Source)
     at java.io.ObjectOutputStream.writeSerialData(Unknown Source)
     at java.io.ObjectOutputStream.writeOrdinaryObject(Unknown Source)
     at java.io.ObjectOutputStream.writeObject0(Unknown Source)
     at java.io.ObjectOutputStream.writeOrdinaryObject(Unknown Source)
     at java.io.ObjectOutputStream.writeObject0(Unknown Source)
     at java.io.ObjectOutputStream.writeObject(Unknown Source)
     at MyPanel.save(MyPanel.java:1475)
     at GraphDrawer.actionPerformed(GraphDrawer.java:243)
     I inentionally did not write the whole error stack because it was way too long and I ran out of characters. But line 1475 is where I do the writeObject call. I also goet some weird not serialized exceptions before on some other classes that are not being written to the file or are not part of the object that I am writing. I serialized those classes and now it's this unknown object that's causing problems.
Edit: The problem may be due to the JFileChooser I am using to select the file as it is a non-serializable object. But I am not trying to write it to the file and in fact am just writing the arrayLists and BigInteger as objects to the file.
Edited by: Cricket_struck on Dec 21, 2009 1:25 PM
Edited by: Cricket_struck on Dec 21, 2009 1:32 PM
Edited by: Cricket_struck on Dec 21, 2009 2:16 PM

java.io.NotSerializableException: javax.swing.plaf.metal.MetalFileChooserUIThat's a Swing component and it is clearly related to the JFileChooser.
I also get some weird not serialized exceptions before on some other classes that are not being written to the file or are not part of the object that I am writing.That's a contradiction in terms. If you get NotSerialzableException it means the objects are being written. So they are reachable from the objects you're writing.
Edit: The problem may be due to the JFileChooser I am using to select the file as it is a non-serializable object.JFileChooser implements Serializable, but you're right, you shouldn't try to serialize it. But clearly this is the current problem. Somewhere you have a reference to it reachable via the object(s) you are serializing.
I suspect that Node and Edge inner classes and that you aren't aware that inner classes contain a hidden reference to their containing class. The solution for serializaition purposes is to make them static nested classes, or outer classes.

Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only

After installation fo ECC6,When I am trying to connect to visual admin,I am getting given below error.
I am also not able to login to NWA
Application cannot be started.
Details:
com.sap.engine.services.deploy.container.ExceptionInfo: Naming error.
System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400010000000001A6B16F0004A600094A9828#1308418992937#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-13,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Cannot authenticate the user.#
#1.5#C000C0A8016400020000000001A6B16F0004A6000C292AF0#1308419041078#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-24,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400030000000001A6B16F0004A6001D1853B8#1308419325187#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-35,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400000000000001CA1A680004A6008F78FF48#1308421244125#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-2,5,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400010000000001CA1A680004A600919BB068#1308421279953#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-13,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Cannot authenticate the user.#
#1.5#C000C0A8016400020000000001CA1A680004A6009220F598#1308421288687#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-24,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400030000000001CA1A680004A60097A70598#1308421381359#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-35,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Cannot authenticate the user.#
#1.5#C000C0A8016400040000000001CA1A680004A6009867E880#1308421394000#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-46,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Cannot authenticate the user.#
#1.5#C000C0A8016400000000000001402EEB0004A600E643EE28#1308422700265#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-2,5,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
Any help would be highly appreciated.
Thanks
Sukrut

Hello,
If you have a installation of dual stack(ABAP + JAVA) system.. check in SU01 transaction if SAP_J2EE_ADMIN role is assigned to the J2EE_ADMIN user. If not, please assign it.
For only JAVA stack systems, default administrator user is Administrator.
thanks
ashish

Error while trying to assign a role via CUP in Portal

Similar Messages

Maybe you are looking for