Error while trying to complete a maintenance cycle

Hi,
I created a maintenance cycle and had some requests created underneath it, some of them gone into production and some of them till QA and one in Dev stage. Created another project along with created another maintenance cycle. Have some requests on that.
Now when i try to close the first cycle it showed all the requests completed and the one still in the cycle (testing stage, dev stage) and also it gave a message like if you complete now it will not be reused in this cycle but when next cycle for that project is created it will be transferred there. I went ahead and tried to complete (close) the cycle, but it is not doing it. The following is what the error showing:
CTS projects for Solman project ZMAINT_1 could not be releaed
CTS project DR1_P0004 in system DR1 client 130 could not be released
Status is showing as Being Completed and it is not allowing to create new cycle since the previous is not completed properly.
Any idea like anything particularly to be done for those CTS project in development system.
Thanks,
Murali.

Hi Ruben,
Thanks for the reply and it worked after releasing the modifiable requests under that cycle. But when i created another cycle under that project it transferred all the urgent correction transports (some of them went to production, some of them not) from the previous closed one but it is not showing any normal correction related transport requests, what happened to those normally when you close a cycle ?
Thanks,
Murali.

Similar Messages

I receive this error while trying to update to iTunes 10.6.3

I receive this error while trying to complete an Itunes 10.6.3 update.
"The update could not be verified. It may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."
I have tried installing again many times with the same result. If someone and tell me how to proceed, this would be great!! Thanks, Kim

I'd try updating using a .dmg installer downloaded from the Apple Website:
http://www.apple.com/itunes/download/

Error while trying to retrieve the task: EventId(complete) does not belong

Hi Experts,
I have created a process composer DC in which i have created a process with two human tasks.
Each tasks is binded with web dynpro Iviews (means followed all the steps neccesary).
I deploed the DC successfully. now i started the process and got a task in my UWL but on click of the task i got the below error.
Error while trying to retrieve the task: EventId(complete) does not belong to referenced component interface of ComponentUsage(com.sap.tc.bpem.wdui.appcontainer.containercomp.ContainerComp:com.infosys.mdm.LoadRepositoryComp, createOnDemand=false, childComponent=com.infosys.mdm.LoadRepositoryComp)
[EXCEPTION]
java.lang.IllegalArgumentException: EventId(complete) does not belong to referenced component interface of ComponentUsage(com.sap.tc.bpem.wdui.appcontainer.containercomp.ContainerComp:com.infosys.mdm.LoadRepositoryComp, createOnDemand=false, childComponent=com.infosys.mdm.LoadRepositoryComp)
I have rechecked the event that i have created in the component controller and Interface controller.
Can you please help me in debunging the error.
thanks
Narendra

Hi,
sounds like an program error. That is an problem which occurs if one or multiple components try to lock the same galaxy object at the same point in time. Did you configured something special on the given task? e.g deadlines?
My proposal is to open an Customer Message so that we can have a detailed look onto the system. If this is not possible could you please provide the complete trace file and some more details about the modeled task?
Best Regards
Andreas

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.

Getting the error "Error while trying to update record" when I try to force complete a plan in DAC

Hello Everyone ,
I am using OBIA 7.9.3.7 . One of my execution plan has finished executing all the tasks but it is still in running mode . When I try to force complete it , it gives the error " Error while trying to update record" . Upon checking the log file , I found the below errors :
MESSAGE:::ORA-04092: cannot COMMIT in a trigger
ORA-06512: at "DAC_CUSTSCM.ETL_FAIL_NOTOFICATION", line 9
ORA-04088: error during execution of trigger 'DAC_CUSTSCM.ETL_FAIL_NOTOFICATION'
EXCEPTION CLASS::: java.sql.SQLSyntaxErrorException
The Plan is in running state for past couple of days . I tried to re-start the DAC services , but again it gave the same error . Kindly suggest .
Regards
Satyendra

Just to correct , the version of obia is 7.9.6.3

Trying to setup new iCloud in system preferences and get error message: "iCloud encountered an error while trying to connect to the server."

Here's the sequence of events:
Setting up a new iMac.
Migration Assistant was aborted during setup and a normal setup was completed.
Then ran Migration Assistant from the newly setup account.
It ran fine, but put all the data in a new account called "user".
Renamed "user" to a new name, renamed the home folder to a new name following these instructions: OS X: How to change your account name or home directory name
Delete the account we originally created, so just have one account with the name we want and all the data, email. Works fine.
Sign into the App Store with the account we share for purchases.
Now, the problem:
Go to System Preferences to setup iCloud with a new Apple ID
Get this error: "iCloud encountered an error while trying to connect to the server."
So I'm unable to setup iCloud for photo stream, FaceTime, etc.
Internet works fine, we can get mail, etc.
Rebooting doesn't help
Ideas?

never mind the problem is gone this morning.

Error while trying to use Photomerge and stitch a few pictures with Photoshop CC 14 on Windows 8.1

I am getting an error while trying to merge some pictures together using photomerge in photoshop cc14, it says photoshop has encounter an error, and it closes photoshop after that, I cannot use photomerge at all, everything else works fine. Any help anyone???

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Error while trying to install EBS 12.1.1

We are getting an error while trying to install EBS R12.1.1 on Linux x86_64 os(RHEL 5.2).We are getting the error at step 2 of 5 during database configuration stage 33% (65%) stage.The error is as given below,
RW-50004:Error code received when running external process.Check log files for details.Running Database Install Driver for TEST instance.
We checked the log files and in ApplyDB_****.log the error is
RW-50010 :script has returned an error: 1
How to fix these issues??
Regards,
Rupdipt

Hi Taj,
I am getting these error messages consistently throughout the log file,
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : testerp
sDbDomain : eigl.com
sDbPort : 1521
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@testerp.eigl.com:1521:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST.eigl.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST.eigl.com)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Wed Jul 22 17:47:10 IST 2009
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle/TEST/db/tech_st/11.1.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /d01/oracle/TEST/db/tech_st/11.1.0/perl/bin:/d01/oracle/TEST/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/d01/oracle/TEST/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/d04/StageR12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:.
LD_LIBRARY_PATH : /d01/oracle/TEST/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/TEST/db/tech_st/11.1.0/lib:/usr/dt/lib:/d01/oracle/TEST/db/tech_st/11.1.0/ctx/lib
Executable : /d01/oracle/TEST/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
     /d01/oracle/TEST/db/tech_st/11.1.0/appsutil/log/TEST_testerp/adcrdb_TEST.txt
Creating the control file for TEST_testerp database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Wed Jul 22 17:47:11 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size          2166536 bytes
Variable Size          427819256 bytes
Database Buffers     624951296 bytes
Redo Buffers          14000128 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'/d01/oracle/TEST/db/apps_st/data/system05.dbf'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.eigl.com"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size          2166536 bytes
Variable Size          427819256 bytes
Database Buffers     624951296 bytes
Redo Buffers          14000128 bytes
ORA-00205: error in identifying control file, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4652
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size          2166536 bytes
Variable Size          427819256 bytes
Database Buffers     624951296 bytes
Redo Buffers          14000128 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'/d01/oracle/TEST/db/apps_st/data/system05.dbf'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.eigl.com"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.1.0.7.0 - Production on Wed Jul 22 17:47:20 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
.end std out.
.end err out.
Whats the solution??
Regards,
Rupdipt

Error while trying to start OC4j11g in standalone mode

I get the following error while trying to start OC4j 11g 11.1.1 in standalone mode:
Error initializing server: Shared library "oracle.fabric.runtime" could not be found.
FYI, I have the imports for oracle.fabric, oracle.fabric.interceptors in server.xml already.
Any thoughts?
Thanks
Ramesh

I deployed the map example app that Oracle posted online (GEOTAGS - Oracle Open World Conference in 2007) on the JDeveloper's embeded OC4J 11g Tech Preview 3. The deployment went well. However, it doesn't seem to work when I go to the main.jsp (http://localhost:8888/geotags/main.jsp). The following is the error. Please tell me what I need to do to solve this problem.
C:\jdeveloper11\jdev\bin>rem ===================================================
========================
Starting OC4J with command: "C:\devtools\Java\jdk1.5.0_14\\bin\java.exe" -XX:Max
PermSize=512m -jar oc4j.jar
Apr 4, 2008 5:23:57 PM oracle.j2ee.xml.XMLMessages warningException
WARNING: Exception Encountered
08/04/04 17:24:05 WARNING: ApplicationServer.enableOC4JDocumentChangeNotifier Al
ternate DocumentChangeNotifier in use!
08/04/04 17:24:05 JMS server will listen on port 9127.
08/04/04 17:24:06 oracle.j2ee.jms.oc4j.JMSServer startup complete
08/04/04 17:24:08 Don't know how to map non-serializable type: interface javax.m
anagement.j2ee.statistics.Stats to Open MBean Type.
08/04/04 17:24:09 WARNING: J2EE JNDI-00002
08/04/04 17:24:09 WARNING: No javax.jms.ConnectionFactory found at null
08/04/04 17:24:12 WARNING: oracle.j2ee.jmsrouter.RouterException: JMS Destinatio
n, {0}, does not exist
08/04/04 17:25:03 Oracle Containers for J2EE 11g (11.1.1.0.0) initialized.
08/04/04 17:32:29 geotags: JspServlet error: Servlet unable to dispatch to the f
ollowing requested page: The following exception occurred:oracle.jsp.parse.JspPa
rseException: /main.jsp: Line # 4, <%@ taglib uri="http://java.sun.com/jsf/core"
prefix="f"%>
Error: Internal error, registered Directive handlers MUST descend from JspDirect
ive or one of its subclasses: {0}
08/04/04 17:32:29 Unable to dispatch JSP Page : The following exception occurred
:oracle.jsp.parse.JspParseException: /main.jsp: Line # 4, <%@ taglib uri="http:/
/java.sun.com/jsf/core" prefix="f"%>
Error: Internal error, registered Directive handlers MUST descend from JspDirect
ive or one of its subclasses: {0}

Re: ERROR while trying to synchronize Audio and MIDI

Hi Guys/Gals
A bit of a strange one. Yes, I have posted a similar question concerning my trusted 2.7ghz G5 PPC and my Digidesign 003R which it turned out that the Digi's FW ports were to blame.
New issue. I have just completed an install on a client's machine, here's it's specs etc:
Hardware:
iMac 2.8Ghz Duo Core Intel, 4Gb ram, 500Gb HD etc (the custom top end before last week's upgrade) arrived last week. Running Leopard 10.5.2 and has all the latest updates. (firmware/software)
Apogee Ensemble (with newest firmware update/upgrade)
Iomega ULTRAMAX HARD DRIVE 1TB USB 2.0/FIREWIRE® 400/800 (sorry, copied from their site)
M-Audio Axiom 49 USB Midi controller/keyboard
Software:
Logic Pro 8 (latest 8.0.1) All standard plugs/samples, no third parties at all, just 100% Apple install.
Reason 4 (latest 4.0.1)
I reformatted the built-in hd to two partitions of equal size, one for the OS and one for whatever. I formated the external terrabyte into two partitions also of equal size, non are journalized, all are GUI partitions. I copied the LP 8 demos to both the internal "spare" partition and to the primary "Audio1" partition of the external drive. The Iomega HD is connected via the 800FW port and the Apogee Ensemble is connected via the 400FW port (the iMac has one of each). If I play any of the demo songs from the internal partition, they play perfectly, if I play them off the external Iomega partitions (either) within 8 bars I get:
"Error while trying to synchronize Audio and MIDI
Sample Rate 45946 recognized.
Check conflict between Logic Pro and external device."
As I said, any demo played back from the internal drives absolutely perfectly..... Any ideas?
Cheers!!
Bobs

There are a lot of different opinions about partitioning in Mac OS X and you can read some of them here:
http://forums.cnet.com/5208-7592_102-0.html?forumID=25&threadID=44865&messageID= 530144
and here
http://forums.appleinsider.com/archive/index.php/t-8096.html
My opinion is that partitions cam be useful when:
1. the OS can't manage big volumes (as it was in the past)
2. the OS can't optimize the space on big volumes
3. want to install 2 or more separate OSes
4. organization (like in your case).
Now, OS X filesystem (HFS+) is robust and reliable and OS X is a multitasking system that parallelizes I/O operations like reading or writing a disk.
So if you have 2 separate hard disk the system can parallelize the operations (i.e. reading from one and writing into another one) but if you have 2 partitions the system (or better the disk subsystem) have to jump back and forth among the partitions.
About the linking schema of the Audio interfaces and the FW hard disks it can change: I connect my FW disk to the MOTU and the MOTU to the mac while a friend of mine have to put the disk before of his Presonus.
Thanks for the beer!
cheers
rob

"error while trying to access the service"

I am trying to convert a pdf file to an excel file. I get a completely unhelpful message that says "error while trying to access the service" .
What does this mean and how do i fix it?

Hi sd433m,
Thank you for posting on the Adobe forums. If you are already subscribed to the service, kindly try the steps mentioned below.
1) Open Adobe Reader Edit>preferences
2) Go to Adobe Online services>change the email address to the one you have subscribed the service with
3) Go to identity> change the email address there as well
4) Click OK
5) Restart the Adobe Reader and try to access the service again.
If you have not subscribed to the service please do that as, we do not offer trial for Create PDF.
Thanks,
Vikrantt Singh

BPM throws: "Error while trying to retrieve the task"

Hi,
 
When clicking on a task(WD-UI) in UWL, BPM throws an error message: 
Error while trying to retrieve the task 
Though, I am able to open up the task when I restart the server ( CE 7.1 EHP1 SP04 patched).
 
Anyone an idea?
 
Regards,
 
Wesley
 
The log file presents the following information (partially):
 
Caused by: java.lang.IllegalStateException: com.sap.glx.core.kernel.api.TransitionRollbackException: Exception during prepare, rolling back
at com.sap.bpem.tm.adapter.core.TaskAdapter$TicketSynchronization.beforeCompletion(TaskAdapter.java:581)
at com.sap.engine.services.ts.jta.impl.SynchronizationWrapper.beforeCompletion(SynchronizationWrapper.java:27)
at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:234)
... 86 more
Caused by: com.sap.glx.core.kernel.api.TransitionRollbackException: Exception during prepare, rolling back
at com.sap.glx.core.kernel.mmtx.AbstractTransactionBase.rollback(AbstractTransactionBase.java:544)
at com.sap.glx.core.kernel.mmtx.AbstractTransaction.do_prepare(AbstractTransaction.java:174)
at com.sap.glx.core.kernel.mmtx.AbstractTransaction.commit(AbstractTransaction.java:77)
at com.sap.bpem.tm.adapter.core.TaskAdapter$TicketSynchronization.beforeCompletion(TaskAdapter.java:579)
... 88 more
Caused by: com.sap.glx.core.kernel.trigger.TriggerLockingException: Cannot acquire lock for update <Context_0_TaskAttributes_ac33d162fa908f8198b3c740708bb6c5{919e4f4b-1581-11df-c72f-02004c4f4f50}(Instance_0_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f45-1581-11df-b4f9-02004c4f4f50}(?),Scope_13_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f4a-1581-11df-94e6-02004c4f4f50}(?),3,true)|Context_0_TaskAttributes_ac33d162fa908f8198b3c740708bb6c5(Instance_0_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f45-1581-11df-b4f9-02004c4f4f50}(Instance_0_bpmboundary_new_24449a1f1a041ff7cd7deb8d764c6405{0d4c2925-157b-11df-b84e-02004c4f4f50}(?),null,Token_0_bpmboundary_new_24449a1f1a041ff7cd7deb8d764c6405{917829a3-1581-11df-b6e0-02004c4f4f50}(?),false),Scope_13_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f4a-1581-11df-94e6-02004c4f4f50}(Instance_0_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f45-1581-11df-b4f9-02004c4f4f50}(?)),4,*true)>
at com.sap.glx.core.kernel.trigger.node.LockingTreeJoinNode.process(LockingTreeJoinNode.java:638)
at com.sap.glx.core.kernel.trigger.core.BFSController.update(BFSController.java:173)
at com.sap.glx.core.kernel.trigger.impl.TriggerNetworkManagerImpl$SequentialController.update(TriggerNetworkManagerImpl.java:550)
at com.sap.glx.core.kernel.mmtx.AbstractTransaction.do_trigger(AbstractTransaction.java:199)
at com.sap.glx.core.kernel.mmtx.AbstractTransaction.do_prepare(AbstractTransaction.java:170)
... 90 more
Caused by: com.sap.glx.core.kernel.trigger.TriggerLockingException: Cannot acquire read row lock for after image (key = Instance_0_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f45-1581-11df-b4f9-02004c4f4f50}(Instance_0_bpmboundary_new_24449a1f1a041ff7cd7deb8d764c6405{0d4c2925-157b-11df-b84e-02004c4f4f50}(?),null,Token_0_bpmboundary_new_24449a1f1a041ff7cd7deb8d764c6405{917829a3-1581-11df-b6e0-02004c4f4f50}(?),false), name = JOIN_CompletionDeadlineWithRealDelayConditionalSequenceConnector_context_join_0_69)
at com.sap.glx.core.kernel.trigger.node.LockingTreeJoinNode.lockAfterRow(LockingTreeJoinNode.java:308)
at com.sap.glx.core.kernel.trigger.node.LockingTreeJoinNode.process(LockingTreeJoinNode.java:636)
... 94 more

Hi,
sounds like an program error. That is an problem which occurs if one or multiple components try to lock the same galaxy object at the same point in time. Did you configured something special on the given task? e.g deadlines?
My proposal is to open an Customer Message so that we can have a detailed look onto the system. If this is not possible could you please provide the complete trace file and some more details about the modeled task?
Best Regards
Andreas

Excel service and OWA - getting ERROR while trying to open/edit Excel documents

Hi All,
We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
We are not able to view/edit the excel workbook from the browser (through OWA).
To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
Error details are given below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/25/2013 1:29:08 PM
Event time (UTC): 3/25/2013 7:59:08 AM
Event ID: fc2e0530f493493896e6c8b6297a0423
Event sequence: 10
Event occurrence: 3
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
    Trust level: Full
    Application Virtual Path: /x
    Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
    Machine name: VHYDMANTHSTP-02
Process information:
    Process ID: 1252
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: ArgumentException
    Exception message: An entry with the same key already exists.
   at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
    Request URL:
http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
    Request path: /x/_layouts/xlpreview.aspx
    User host address: 10.81.138.92
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 13
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
is microsoft alive??
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176

"Error while trying to sync Audio and Midi"

"Error while trying to sync Audio and Midi" I have been having this problem now and then for some time. Now, I can't run any audio files without a lot of popping. I tried all the suggestions on the support document for this issue. I even downloaded new drivers from Motu for my Express XT Midi interface and my 828MK11 Audio interface. There has been no change. HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!!!!!!
Also, I have tried reseting the 828 to factory default and that does not help.
Jonathan Jenkins

Hi,
I solved my own problem by resetting the factory presets:
Follow these steps to restore the MOTU 828mkII to Factory Default Settings.
Disconnect the firewire cable from the 828mkII
Press the Setup knob
Turn the Setup knob all the way to the right
Press the Select knob
Press the Value knob
Power off the interface and plug the firewire cable back in
Power the interface back on
The same steps can be followed to restore the Factory Default Settings on a Traveler.
-Robert

"Error While Trying To Synchronise Audio And Midi"...non-tempo event found

"Error While Trying To Synchronise Audio And Midi"...non-tempo event found
now when I shutdown Logic And relaunch the Project, the notes hang and "WHAT THE FRIIGIN"
(this was a bug way back when Logic7 was first released)
this is bad!
SvK

Thanks Steven.
big help. In our session we keep getting this problem where the song counter stops, the music keeps playing and we get an error message saying:
Non Tempo-Event found in Sync Reference
We looked in the tempo list and somehow there was a tempo event of 0.00 tempo in there.
We deleted it, got the same error message, but the prob seems to be fixed.
Apple, please fix this!
Thanks
Felix

Error while trying to complete a maintenance cycle

Similar Messages

Maybe you are looking for