Error while trying to export with Preview: 'unable to convert NSNamedColorSpace System controlColor to Device RGB colorspace'

When I try to export a PDF with preview, the dialog doesn't show and this error appears in the system log.
11/2/13 2:01:01.684 PM Preview[828]: -[NSRemoteView viewDidMoveToWindow] caught non-fatal NSInternalInconsistencyException 'unable to convert NSNamedColorSpace System controlColor to Device RGB colorspace' with backtrace (
          0   CoreFoundation                      0x00007fff8e24d41c __exceptionPreprocess + 172
          1   libobjc.A.dylib                     0x00007fff8a400e75 objc_exception_throw + 43
          2   CoreFoundation                      0x00007fff8e24d1f8 +[NSException raise:format:arguments:] + 104
          3   Foundation                          0x00007fff8be42c61 -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 189
          4   ViewBridge                          0x00007fff8a08165c -[NSSecureColor initWithColor:] + 724
          5   ViewBridge                          0x00007fff8a08136f +[NSSecureColor secureColorWithColor:] + 48
          6   ViewBridge                          0x00007fff8a0a4cfb -[NSRemoteView sendFontSmoothingBackgroundColorToService:] + 40
          7   ViewBridge                          0x00007fff8a0a5bf5 -[NSRemoteView viewDidMoveToWindow] + 197
          8   AppKit                              0x00007fff881461d0 -[NSView _setWindow:] + 2899
          9   AppKit                              0x00007fff88143804 -[NSView addSubview:] + 364
          10 AppKit                              0x00007fff88157953 -[NSFrameView addSubview:] + 45
          11 AppKit                              0x00007fff88165cb5 -[NSWindow setContentView:] + 511
          12 AppKit                              0x00007fff889cb233 -[NSVBSavePanel init] + 287
          13 AppKit                              0x00007fff8874d5b9 +[NSSavePanel newRemotePanel] + 309
          14 AppKit                              0x00007fff8874d675 +[NSSavePanel _crunchyRawUnbonedPanel] + 120
          15 AppKit                              0x00007fff885a54fc -[NSDocument _preparedSavePanelForOperation:] + 260
          16 AppKit                              0x00007fff885a5f6f __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke_2 + 320
          17 AppKit                              0x00007fff885d5910 -[NSDocument _commitEditingThenContinue:] + 501
          18 AppKit                              0x00007fff885d5abd -[NSDocument _commitEditingWithDelegate:didSomethingSelector:contextInfo:thenContinue:] + 138
          19 AppKit                              0x00007fff885a5e20 __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke + 375
          20 AppKit                              0x00007fff885989b8 -[NSDocument _processActivity:blockingMainThread:] + 1373
          21 AppKit                              0x00007fff88599921 -[NSDocument performActivityWithSynchronousWaiting:usingBlock:cancellationHandler:] + 220
          22 AppKit                              0x00007fff885a5c9a -[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:] + 137
          23 Preview                             0x000000010392901b Preview + 917531
          24 AppKit                              0x00007fff8834d3d0 -[NSApplication sendAction:to:from:] + 327
          25 AppKit                              0x00007fff88368348 -[NSMenuItem _corePerformAction] + 394
          26 AppKit                              0x00007fff88368084 -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 117
          27 AppKit                              0x00007fff883b74dd -[NSMenu _internalPerformActionForItemAtIndex:] + 35
          28 AppKit                              0x00007fff883b7359 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 104
          29 AppKit                              0x00007fff8835e176 NSSLMMenuEventHandler + 716
          30 HIToolbox                           0x00007fff8973c6d4 _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 892
          31 HIToolbox                           0x00007fff8973bc87 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 385
          32 HIToolbox                           0x00007fff8974fd90 SendEventToEventTarget + 40
          33 HIToolbox                           0x00007fff89785a30 _ZL18SendHICommandEventjPK9HICommandjjhPKvP20OpaqueEventTargetRefS5_PP14OpaqueE ventRef + 420
          34 HIToolbox                           0x00007fff897b8618 SendMenuCommandWithContextAndModifiers + 59
          35 HIToolbox                           0x00007fff897b85c4 SendMenuItemSelectedEvent + 178
          36 HIToolbox                           0x00007fff897b84a5 _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 94
          37 HIToolbox                           0x00007fff897c0425 _ZL14MenuSelectCoreP8MenuData5PointdjPP13OpaqueMenuRefPt + 718
          38 HIToolbox                           0x00007fff897c0051 _HandleMenuSelection2 + 446
          39 AppKit                              0x00007fff882d079c _NSHandleCarbonMenuEvent + 284
          40 AppKit                              0x00007fff8812f56e _DPSNextEvent + 2170
          41 AppKit                              0x00007fff8812e8db -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
          42 AppKit                              0x00007fff881229cc -[NSApplication run] + 553
          43 AppKit                              0x00007fff8810d803 NSApplicationMain + 940
          44 libdyld.dylib                       0x00007fff868025fd start + 1
          45 ???                                 0x0000000000000001 0x0 + 1
timestamp: 14:01:01.684 Saturday 02 November 2013
process/thread/queue: Preview (828) / 0x7fff741cc310 / com.apple.main-thread
code: line 607 of /SourceCache/ViewBridge/ViewBridge-46/ViewBridgeUtilities.m in logCaughtException
domain: exceptions

Similar Messages

Error while trying to export my database using this command

Hi,
I am trying to export my database using this command :
expdp system/manager@db1 full=n schemas=kul4231 dumpfile=kul4231_20091122.dmp logfile=kul4231_20091122.log directory=dump_dir1
Error:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-31626: job does not exist
ORA-31637: cannot create job SYS_EXPORT_SCHEMA_05 for user SYSTEM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 600
ORA-39080: failed to create queues "KUPC$C_1_20091122101110" and "" for Data Pump job
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPC$QUE_INT", line 1606
ORA-01008: not all variables bound
DB version : Release 10.2.0.4.0
all ideas are welcomed!!!!!!!!!!!! let me know where am i going wrong!!!!!!!
thanks in advance..!!!!!!!!
venkat.

What is your SGA settings? (especially streams_pool_size).
You can try to bump streams_pool_size to 100M if your current setting is below that.
Regards
Tomasz K.

Error while trying send emai with attachment

Hello,
I am facing an error while trying to send email with attachment (spreadsheet).
Error is: "Error in calling 'SBCOMS_SEND_REQUEST_CREATE' in 'SO_DOCUMENT_SEND_API1' with Sy-subcr = 1".
Do I need to configure the sender email address or some configuration at the sender system?
I followed the example given in the below link.
http://wiki.sdn.sap.com/wiki/display/ABAP/HowtowriteanABAPProgramtoplaceanExcelfileinapathandsenditasan+Attachment
Could you please help on this?
Thanks & regards,
Ravish

Hi Ravish,
sure you can create local excel using [Desktop Office Integration (BC-CI)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf], load as binary and attach.
More elegant, future-oriented and advanced is the [excel-from-scratch-approach abap2xlsx by Ivan Femia|http://wiki.sdn.sap.com/wiki/display/ABAP/abap2xlsx]
Regards,
Clemens

Object Open Error while trying to export the vDataFact table

I am getting an error when trying to export the vDataFact table to a flat file. I have been able to do this several time before with the segment tables but would like to run this against vDataFact
The error in the error log is:
   ERROR:
       Code............ -2147217915
       Description..... Object was open.
The screen error is:
      The connection cannot be used to perform this operation. It is either closed or invalid in this context.
The line that appears to cause the issue is: Set rssql = API.DataWindow.DataAccess.farsKeySet(CStr(strSQL))
Here is my complete script:
Sub webdatafacts()
'Declare Variables
   Dim objFileSystem 'File System
   Dim strFileName 'File name
   Dim ObjTextFile
'SQL variables
Dim strSQL ' Placehold for SQL Query
Dim rssql 'Placeholder for result set for sql query execution
'SQL Statement
            strSQL = "SELECT PartitionKey, Account, AccountX, Entity, EntityX, ICP, ICPX, UD1, UD1X, UD2, UD2X, UD3, UD3X, UD4, UD4X, Amount FROM vDataFact"
            set rsSQL = DW.DataAccess.farsFireHose(strSQL,False)
'Create the filesystem object
            Set objFileSystem = CreateObject("Scripting.FileSystemObject")
            Set ObjTextFile = objFileSystem.OpenTextFile(DW.Connection.PstrDirInbox & "\VDataFactExport.txt", 2, TRUE, 0)
            ObjTextFile.Close
            If Not rssql.EOF and Not rssql.BOF Then
            Set objTextFile = objFileSystem.OpenTextFile(DW.Connection.PstrDirInbox & "\VDataFactExport.txt", 2, FALSE, 0)
            Do Until rssql.EOF
'Loop across all fields in recordset delimiting them with a tab key
            For i = 0 To rssql.Fields.Count -1
           strString = StrString & rssql(i) & vbTab
           Next
'Output the resulting string to the text file
          ObjTextFile.WriteLine (strString)
'Reset the string to empty for the next record
         strString = ""
'Move to the next record in the recordset
              rssql.MoveNext
              Loop
'Close the recordset and the text file
             rssql.Close
             ObjTextFile.Close
    End If
'Destroy the instance of the recordset from memory
      Set rssql = Nothing
End Sub

Thanks, that was one of my suspicions, however, i was able to get the script to work by changing:
set rsSQL = DW.DataAccess.farsFireHose(strSQL,False)
to
set rsSQL = DW.DataAccess.farsFireHose(strSQL,True)
...to be honest though, i'm not entirely sure why that fixed my issue

BI portal error while trying to export to excel

Hi All,
In BI portal, I am getting an error message when trying to export the report to excel. Following is the error message:
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with SAP NetWeaver 7.0 Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1164789.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,
Required information for reproduction according to note 948490.
Can anyone please help me out.
Thanks & Regards,
Deb

Hi,
Let me know How much amount of data you are exporting and your system information(ABAP and Java)?
Thanks,
Venkat

Getting an "Internal Error" while trying to export.. Please Help??????

I am using Windows 7 with photoshop cs5 on a PC. When i try and export an image to my canon printer I get a popup telling me that an "internal error has occured". What is wierd is everything was fine before and have used it a bunch of times then all of a sudden it stopped. I have tryed to unistall photoshop then reinstall and everything. I am trying to export to a canon plugin so i can print from photoshop. Any one have any ideas on how to fix this problem. I am extremely frustrated. Thanks
Josh

Chris,
Yes that is all that pops up. Its really weird. When i export it gets about half way on the progress bar then a little box pops up saying " An Internal Error..." I don't remember all the words but it is less than 5 words. Never thought it could be the plugin. How do you delete a plug in that was installed on photoshop? Thanks
Josh

"General error" while trying to export my movie.

Hi all, I saw a few threads with this topic but no one seems to have a solution so I thought I would post a new one hoping for a miracle
I have a small movie that I made that I want to export with "using quicktime conversion" option. As soon as I rename the title and choose a destination, I get the "General Error" message that pops up with no number or error code attached to it. I tried saving the file to different hard drives with a lot of space to spare and still won't work. I also did the "render all" option before trying to export my movie. BTW, I'm only at around 11 minutes of movie and my whole project should be about 2 hours...
Also, I chose the correct AVCHD 1920 X 1080 codec since my original data comes from my Canon HF200.
When i was only a few minutes into my project, I did a test film and I managed to export it but had no sound when playing the test movie on my WDTV (that's another problem though) but now it won't even export at all... Any ideas?
Thanks,
Rob

A couple things to try:
1. Decrease the amount of RAM allowed to the application and see if it was a problem with the OS not having enough to function.
2. Basic troubleshooting procedure, trashing preferences and repairing permissions:
http://fcpbook.com/Misc1.html

Error while trying to export data from Solution Manager 3.1

Hello, when trying to export a project via SOLAR_MIGRATION in Solution Manager 3.1, I get the following error when trying to release the transport:
COMMUNICATION_FAILURE for RFC call SCMS_CONT_EXPORT (destination SAPKPROTP): / RfcExecProg: SAP0451.
Error in calling KPro transport server
Has anyone experienced this or have an idea how to reslove it? I opened a message through OSS and received this feedback:
sapkprotp is not available for AS/400.
In your case, sapkprotp must be started on the SAP Content Server.
sapkprotp must then be started via a SAP Gateway connection.
Please change the RFC destination of SAPKPROTP so that
the program must be started on your SAP Gateway on the content server
computer.
We currently don't have a Content Server and I would like to be able to export this project without having to install a new application on a Windows server. I would appreciate any insight you may have into this. Thank you.
~TJ

If you don't have one already create a gateway instance on your Content Server.
Change or create the RFC destination : SAPKPROTP type = T
Check the radio button to start on Expicit Host
Enter the program = c:\winnt\sapkprotp.exe
Enter target host - use the hostname of the server for your Content Server
Enter the Gateway information
Regards,
Brian

Error while trying to export a report into PDF using JRC (Linux env)

Hi all,
I have my web app installed on a Linux environment. When trying to export a CR report into PDF using JRC
PrintOutputController controller = reportClientDoc.getPrintOutputController();
          ByteArrayInputStream byteArrayInputStream = (ByteArrayInputStream) controller.export(ReportExportFormat.PDF);
I got this error message:
19/02/2009     10:21:37     b     INFO     PdfExporter: PdfDocumentModeller.modelPage (page 1)
19/02/2009     10:21:37     b     INFO     PdfExporter: Modelling page
19/02/2009     10:21:37     b     INFO     PdfExporter: Creating document manager, text modeller and image modeller.
19/02/2009     10:21:37     b     ERROR     PdfExporter: Exception caught in PDFFormatter.formatPage (from PdfDocumentModeller.modelPage); aborting export
java.lang.IllegalArgumentException: Data type is not supported.
     at java.awt.image.Raster.createInterleavedRaster(Raster.java:212)
     at java.awt.image.Raster.createInterleavedRaster(Raster.java:178)
     at java.awt.image.ComponentColorModel.createCompatibleWritableRaster(ComponentColorModel.java:2826)
     at java.awt.image.BufferedImage.<init>(BufferedImage.java:439)
     at com.crystaldecisions.reports.exporters.format.page.pdf.pdflib.u.<init>(Unknown Source)
     at com.crystaldecisions.reports.exporters.format.page.pdf.b.k.a(Unknown Source)
     at com.crystaldecisions.reports.exporters.format.page.pdf.b.k.a(Unknown Source)
     at com.crystaldecisions.reports.exporters.format.page.pdf.b.d(Unknown Source)
     at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)
     at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
     at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
     at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
     at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
     at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)
On my Windows environment the JRC export into PDF work perfectly. I know that there are some known issues regarding the usage of JRC on Linux environments. Could this be one of those?
Any solution (or workaround) would be highly appreciated!
Thank you!
PS Maybe this is relevant: I use a MySQL database!
Edited by: Sandila Catalin on Feb 19, 2009 10:01 AM

What kind of image do you have in the report?
Do you have -Djava.awt.headless=true specified for the Java JVM option?
Sincerely,
Ted Ueda

Getting Error While trying to export Data in Table Mode

Hi Guru's,
My DB Version: 10.2.0.1.0
My OS Version: Windows Server 2003
During exporting Table data i am getting below error:
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
ORA-31626: job does not exist
ORA-31637: cannot create job SYS_EXPORT_TABLE_01 for user SYS
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 601
ORA-39080: failed to create queues "" and "" for Data Pump job
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPC$QUE_INT", line 1550
ORA-01403: no data found
command which i used for export is ;
expdp username/password@db_name tables=(schema.table_name:partition_name) directory=test_dir dumpfile=file_name.dmp logfile=logfile_name.log content=all
Can you please help me what happen to export
when i use original export import i am able to do that but not with expdp why is it so

It is a bug. The following metalink note will will help you out
ORA-31626 ORA-31637 ORA-06512 ORA-39080 ORA-1403 Received When Using DataPump Export [ID 744700.1]

Experiencing error while trying to render with motion tile effect

I am working on a work project and I am ready to render and when I do I get an error message, here it is
"Motion Tile cannot allocate a buffer larger than 30000 pixels in either dimension" (516) (25 :: 56)
I have tried several things to overcome this bu to no avail, my deadline is very near, can someone please help me!
Thanks, Cisco X.

I purchased an AE template from VideoHive website and I was trying to
replace an image. The project looks like this: your going thru a grungy
corridor, the corridor seems to go go a long way. I was trying to replace
the image of grungy texture with another image for my project I copied all
effcts attributes over to new image and that's when I kept getting error
message. Here is a link to the site to see the project I bought.
http://videohive.net/item/grungy-corridor-with-old-looking-pictures-text/44732
Thanks for the help I really appreciate it.
Cisco X.
Message was edited by: Andrew Yoole: Removed double post, fixed broken hyperlink

I keep getting "iCloud encountered an error while trying to connect with the server" - ideas?

I'm on my PC at work and cannot access anything - my calendar, reminders or contacts. The apple support website doesn't show any outages - any ideas?

Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin

Compressor error mesage while trying to export

I how do I fix this issue while trying to export my project ? Tbhis message appears when trying to export.
"The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"

You probably need to update the software to a version that works with Mavericks.

Error while trying to remove an object with dsrm command

hello,
i get an error while trying to delete an object computer with the command line tool, DSRM. i get this view:
actually, it's a one of hundreds of commands, that help cleaning the active directory of the obsolete objects. it is saying : "Access Denied" (in french, accès refusé). i say that the account used to execute this command, is a member of domain
admins group, and enterprise admins group too. so i cannot believe it's a mater of some missing rights... :/
thanks in advance, for your help,
regards
Lotfi BOUCHERIT

Hi,
I was able to reproduce your issue when using a non-elevated command prompt in a 2008R2 box. So please try to elevate your command prompt and your command will most likely go through.
In addition to above, I'd suggest you look in to PowerShell instead, which in most cases is more effective.(and doesn't need to run in an elevated prompt to make AD-Changes)
The same as above could be done with the powershell cmdlet Remove-AdComputer.
Remove-AdComputer -Identity "Distinguishedname"
Hope this helps you!
Microsoft Certified Trainer
MCSE: Desktop, Server, Private Cloud, Messaging
Blog: http://365lab.net

A network error occurred while trying to communicate with the server.

Hello All,
I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
In console I'm seeing these errors when I try to access various services:
2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
"<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?

Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems.

Error while trying to export with Preview: 'unable to convert NSNamedColorSpace System controlColor to Device RGB colorspace'

Similar Messages

Maybe you are looking for