Error while trying to generate SAP Query

Awaiting reply...
Hello ABAP Experts,
I tried to add REGUP-BUDAT to a query infoset, which already had BSAK and LFA1 table. While generating I get the following error message: 
Global syntax check
Additional tables
Error in code for table REGUP
Field "AND" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement.
Warning messages
Identification of text fields
Text field for BSAK-UMSKZ was re-identified
Text field for BSAK-ZUMSK was re-identified
I am an FI person with very limited ABAP knowledge, so please explain, how I can best resolve this.
Thank you.
Edited by: Munair on Feb 7, 2012 11:01 AM

Closed due to no responses from any body

Similar Messages

  • Getting error while trying to generate SNP PPM

    Hi Experts,
    I am getting error, while trying to generate SNP PPM fron PP/DS PPM. It says Set up matrix for resource in planning version is not define. But I checked that i havea set up matrix as well as setup group.
    Any help will be appreciated. Thanks In advance.
    Sani

    Hi Sani,
    Try running resource & ppds ppm consistency check against
    their respective transactions (/sapapo/res01 & /sapapo/scc_03)
    and check any inconsistencies found.
    Regards
    R. Senthil Mareeswaran.

  • Error while trying to install SAP CE 7.1 EHP 1 on Windows 7

    I am trying to install SAP CE 7.1 EHP 1 on Windows 7.  I am getting below error while trying to install. can you please help to fix this problem?
    Running msiexec failed with return code 1603: undefined
    Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
    If you want the installer to retry, choose Yes. If you want the installer to abort the installation, choose No.
    Thanks,
    Sridhar.

    I donu2019t think so it is windows 7 or 64/32 bit hardware/software issue. I have faced u201Cmsiexec failed with return code 1603u201D error many times during SAP installation and solved this issue with below mentioned procedure.
    Solution:
    Just change the location of temp directory to empty folder in user environment variable without cancel installation in current user session. After that, click on yes button to continue the installation. If installation will ended after click on yes button, restart the installation with continue old installation option.
    Regards.
    Yasir

  • Error while trying to install SAP 8.8 Pl 10 Server on Windows 7

    Hellow All,
                       I am facing the problem while trying to instal the Server and Server Tool os SAP 8.8 Patch Level 10 on the windows server.It is displaying the error failed to installed:1628 error evertime I try to run the Server Installer.
    regards,
    pankajk

    Dear,
    Check the below link:
    https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1434624&nlang=E&smpsrv=https%3a%2f%2fwebsmp110%2esap-ag%2ede
    Thanks,
    Neetu

  • OWB: Error while trying to Generate

    I have a project defined in OWB 3i and everything was working fine till last week. Today while I am trying to
    generate a mapping it is giving the following error
    Locking error, unable to continue with generation.
    Another wierd thing I noticed is, when you go to configure option for mappings, under operators the only option
    available now is access specification. It does not show hints, partition etc at all.
    All the mappings in this module got the same problems while mapping from other module in the same
    project can be generated sucessfully. I am thinking this is an issue at module level. And validation happens fine
    for these mappings.
    I tried all the basic things like every one logged out and getting the repository data base and target
    database bounced.
    Has anyone encountered this before, please pass on any information which might help.

    Closed due to no responses from any body

  • Error while trying to generate tax invoice output

    Hi Gurus,
    I am trying to generate tax invoice output for the billing document at that time system is generating the following error message " Enter tax rate for  position 000010 document 6111000019".Actually I have maintained the Tax  condition records correctly and it's showed in billing document.Please let me know any one have idea on this why its throwing the error message and stoping me to generate the VAT invoice output.
    Thanks
    Hari Challa.

    Closed due to no responses from any body

  • Error while trying to run Bex Query -------- Field symbol is not assigned.

    Hello Every body,
    I am facing the following error after giving some value in Selection screen and trying to run the Bex Query
    ERROR : Field symbol is not assigned.
    Thanks in advance,
    Praveen

    can u plz give details of variables, what it is build on and the value u r inputing,
    also is thr any dump.
    double click on the error message it shows u. it will give u the detailed error message. post that too

  • Getting error while trying to generate IPA

    I am creating an iphone project. While generating the .ipa file from flash builder 4.6. its giving me the below mentioned error.
    A fatal error has been dected by Java runtime environment. Please help me asap.

    Hi Sani,
    Try running resource & ppds ppm consistency check against
    their respective transactions (/sapapo/res01 & /sapapo/scc_03)
    and check any inconsistencies found.
    Regards
    R. Senthil Mareeswaran.

  • Error while trying to Execute the Query with Customer Exit

    Hi Experts,
           I am having a Query with Customer Exit, it is working fine for all the Employess, except for one. When i try to remove the Customer Exit it is working for her too. Below is the error i am getting.
    system error in program SAPLLRK0 and form RSRDR; CHECK_NAV_INIT_BACK
    Thanks,
    Kris.

    Hello Kris,
    Are you working with multiprovider? Please check if OSS notes 813454,840080 or 578948 are applicable in your case.
    Regards,
    Praveen

  • File not found error while trying to generate stub using wsdl2java

    Hi
    I am facing this peculiar problem while generating the stub thru the wsdl2java command.
    It shows series of file not found exception.
    What all thing need to be set or taken care while we execute the command . anybody having window script for doing this please share it with me.
    Your help is higly appreciated
    Thanks
    Ottran

    It could be that the wsdl file is not found if you are invoking this command for a wsdl which is locally existing
    Could you send the command and the exception msgs that you are getting
    Regards
    Mari

  • "Error #2032" while trying to import BEx query through SAP Netweaver BW connection in Dasboard

    Hi Team,
    BO server version: 4.1 SP3 Edge edition
    Dasboard Version: 4.1 SP3
    BI Version: NW 7.4 SP7 (ABAP only)
    We are getting Error #2032 while trying to import BEx query through SAP
    Netweaver BW connection in dasboard Xcelsius.
    Please suggest to sovle this error.
    Regards,
    Vinay Shrimali

    There are several notes about this error - please see http://service.sap.com/sap/support/notes/1856691
    http://service.sap.com/sap/support/notes/1801130

  • Error while trying to query mbean

    I am getting an error while trying to query MBeans:
    <Mar 27, 2007 4:27:32 AM MDT> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
    ERROR: Tue Mar 27 04:27:32 MDT 2007MBeanHome being refreshed weblogic.management.NoAccessRuntimeException: User guest does not have access permission on weblogic.admin.mbean.MBeanHome
    Bea doc says that the cause of this error is that the context is closed in a different thread than the one that created it. I have multiple thread that query the mbeans. The code that does the above is in a synchronized block. The code runs fine on some environments. On wls 8.1 it is giving the above error.
    Anyone faced this issue? Any ideas, suggestions?
    thanks a lot
    Jain

    Hi Daniel
    Thanks for your help. Here is some more info.
    I have another application that goes out and tries to get the MBeanHome. Here is the code:
    Environment env = new Environment();
    env.setProviderUrl(t3URL);
    env.setSecurityPrincipal(t3UserName);
    env.setSecurityCredentials(t3Password);
    ctx = env.getInitialContext();
    mBeanHome = (MBeanHome) ctx.lookup MBeanHome.ADMIN_JNDI_NAME);
    This code runs fine in the app. where it is not threaded. But the same code when run in a separate thread is throwing the error. It is happening only in wbl 8.1. In wls 6.1 it runs fine. It is strange. Any clues will be appreciated.

  • Error while trying to use '{' in the query

    Hi,
    The below mentioned query is giving Error while trying to use '{'
    Query:
    select s,x from table(SEM_MATCH(
    '{?s rdf:type <http://www.cs.com/sbip/dwh/mdm/data_modeling#Base_Term> .
    ?s ?p ?x}',
    SEM_Models('foundation'),
    SEM_RuleBases('OWLPRIME'),
    SEM_ALIASES(SEM_ALIAS('dm','http://www.cs.com/sbip/dwh/mdm/data_modeling#'),
    SEM_ALIAS('owl','http://www.w3.org/2002/07/owl#')), null, 'INVALID'))
    where regexp_like(x,'Customers','i');
    Error details:
    ORA-29532: Java call terminated by uncaught Java exception: oracle.spatial.rdf.server.TokenMgrError: Lexical error at line 1, column 1. Encountered: "{" (123), after : ""
    ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 178
    ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 67
    ORA-06512: at line 4
    I am unable to use Option, Filter in query.
    Any solution?
    Please let me know do i need to apply any patch?
    Note: I am using Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    Regards,
    Kavitha.

    Hi,
    For OPTIONAL support in 11.1.0.7.0, you need the following patch
    Patch 7600122: CURLY BRACE SYNTAX,VIRTUAL MODELS, NETWORK INDEXES AND HINTO FRAMEWORK SUPPORT
    Support for SPARQL FILTERs in SEM_MATCH is not available for 11.1.0.7.0. You will need version 11.2.0.1.0 or later for FILTER support. With 11.2.0.1.0, we recommend that you apply our latest patch set:
    Patch 9819833: SEMANTIC TECHNOLOGIES 11G R2 FIX BUNDLE 2
    All of the above patches are available through My Oracle Support.
    Thanks,
    Matt

  • JCO.Server Error while trying to execute a RFC program from SAP

    Hi,
    We are connecting to an external registered server program from SAP via Web Methods.
    The external server program is registered with the SAP Gateway. We have created a TCP/IP RFC destination and are able to connect to the destination successfully via SM59.
    An RFC function is created in SAP and is called using the syntax CALL FUNCTION "/NGN/BAPI_STRE_SEARCH_PROCESS" DESTINATION 'PRDB2B'. We have also handled the COMM_FALIURE and SYSTEM_FALIURE exceptions in the function call.
    We are monitoring the gateway via SMGW and see a connection log to the RFC destination as below
    Number - 10
    LUname - dev01
    TPName - sapgw00
    User - KRAORANE
    Status - CONNECTED
    Symbolic - PRDB2B
    Conversation - 86520353
    Prot - REG
    SAP return code - 0
    CPIC rtn code - 0
    The external program returns results as expected.
    However sometimes the RFC fails and returns the message “JCO.Server could not create server function /NGN/BAPI_STRE_SEARCH_PROCESS”.
    We are not able to figure what exactly is causing this error. Any help will be highly appreciated.
    -Kiran

    Hi,
    Please see the below links..
    JCO.Server Error while trying to execute a RFC program from SAP
    Re: JCO.Servcer could not find server function
    Re: JCO.Server could not find server function 'SET_SLD_DATA'
    /people/kathirvel.balakrishnan2/blog/2005/07/26/remote-enable-your-rfchosttoip-to-return-host-ip-to-jco
    Re: interfacing SAP with an existing java applications
    http://help.sap.com/saphelp_nw04/helpdata/en/47/80f671ee6e4b41b63c0fe46bd6e4f8/content.htm
    http://www.sapgenie.com/faq/jco.htm
    Regards
    Chilla..

  • Cnnection error while creating universe on Bex Query in BW

    Hi
    I am getting connection error while connecting to BW Bex query.
    The error i am getting while creating universe is  A runtime exception has occured Error getting levels for hierarchy  dimension .....:Unknown error.
    After this
    Also while creating universe no key figures/measures are getting generated from Bex query to designer.
    Also in Bex query which are created as mandatory variables comes as  Prompts in webi.
    But when I try to parse in Condition filter it is throwing error.
    Currently that mandatory variable is From Date and To Date
    Is we require to change the prompt syntax in Condition filter.
    Also kindly suggest solution for Connection error as impemtation is getting affected.
    Regards
    Gaurav Mang

    Hi
    R u saying allow external acces in BEX query.This option in Bex Query designer.
    Or In whether while creating universes under properties tab there is use of OLAP universes option has to be made to Yes.
    This both things we have tried
    Let me know any other option to be tried.
    Regards
    gaurav mang

Maybe you are looking for

  • IPod no longer puts out sound, tried multiple resets/headphones

    I have had my iPod for years, I believe I purchased it in 2006, and only days ago did it lose sound. I have tried to reset it, kill the battery, and I have also tried multiple headphones that work on other devices, to no avail. I've always had issues

  • How to Use Sequence created in Oracle Database in SQL Ldr Control file

    Hi, I created a sequence in oracle database. How will use the sequence in SQL loader Control file. Thanks in advance

  • I can't find video out on my iphone 3gs

    I bought an apple component cable for my iphone 3gs and/or 4th generation itouch.  But even when the cable is plugged in I can't find the video out setting. I realize that since the new update to 5, this setting is in a different location (under gene

  • CDPOS for the moving avenge price when using MIRO, MIGO & VL31N etc.

    Hi Is there a way of tracking all changes with CDPOS for the moving avenge price when using MIRO, MIGO & VL31N etc. We can show changes for MR21 in CDPOS but we need to reflect all changes made to the moving avenge price for MIRO, MIGO & VL31N etc. W

  • Acrobat Pro PDF Settings

    I'm using Acrobat Pro...Does anyone know if there is a setting so I can make a writeable pdf saveable to the user. For example, they fill out the pdf form and then are able to save the completed form in their computer.... thanks