Error while trying to generate tax invoice output

Hi Gurus,
I am trying to generate tax invoice output for the billing document at that time system is generating the following error message " Enter tax rate for position 000010 document 6111000019".Actually I have maintained the Tax condition records correctly and it's showed in billing document.Please let me know any one have idea on this why its throwing the error message and stoping me to generate the VAT invoice output.
Thanks
Hari Challa.

Closed due to no responses from any body

Similar Messages

Getting error while trying to generate SNP PPM

Hi Experts,
I am getting error, while trying to generate SNP PPM fron PP/DS PPM. It says Set up matrix for resource in planning version is not define. But I checked that i havea set up matrix as well as setup group.
Any help will be appreciated. Thanks In advance.
Sani

Hi Sani,
Try running resource & ppds ppm consistency check against
their respective transactions (/sapapo/res01 & /sapapo/scc_03)
and check any inconsistencies found.
Regards
R. Senthil Mareeswaran.

OWB: Error while trying to Generate

I have a project defined in OWB 3i and everything was working fine till last week. Today while I am trying to
generate a mapping it is giving the following error
Locking error, unable to continue with generation.
Another wierd thing I noticed is, when you go to configure option for mappings, under operators the only option
available now is access specification. It does not show hints, partition etc at all.
All the mappings in this module got the same problems while mapping from other module in the same
project can be generated sucessfully. I am thinking this is an issue at module level. And validation happens fine
for these mappings.
I tried all the basic things like every one logged out and getting the repository data base and target
database bounced.
Has anyone encountered this before, please pass on any information which might help.

Closed due to no responses from any body

Error while trying to generate SAP Query

Awaiting reply...
Hello ABAP Experts,
I tried to add REGUP-BUDAT to a query infoset, which already had BSAK and LFA1 table. While generating I get the following error message:
Global syntax check
Additional tables
Error in code for table REGUP
Field "AND" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement.
Warning messages
Identification of text fields
Text field for BSAK-UMSKZ was re-identified
Text field for BSAK-ZUMSK was re-identified
I am an FI person with very limited ABAP knowledge, so please explain, how I can best resolve this.
Thank you.
Edited by: Munair on Feb 7, 2012 11:01 AM

Closed due to no responses from any body

Idoc in error while trying to post vendor invoice(higher items not allowed)

Hi All,
we have two SAP systems. SAP A and SAP B.
SAP A is the vendor for SAP B system we have created a sales order/delivery/out bound invoice in SAP A system.The sales order has BOM material with main item and sub items. We have the same material master data and BOM master data in system A and system B since we are following split architecture.
The outbound invoice(with main and sub item) in system A has generated an outbound idoc and the idoc has gone to SAP
system B. There are the usual segments like E1EDP01 for main item and another E1EDp01 for the sub itmes in the outbound
idoc.The message type is INVOIC and basic type INVOIC02 with no extension.
In system B, the inbound idoc (coming from system A) has failed giving the error message "higher level items not allowed". The
segment E1EDP01 for sub item is highlighted in red ! basically the inbound idoc in sap system B is posting a vendor
invoice since the inbound idoc in B is calling the FM IDOC_INPUT_INVOIC_MRM... I think this is doing vendor invoice
verification.
I have checked in system A, all is ok and the outbound idoc is ok but the issue is in sap system B, the inbound idoc has failed
with message "higher level items not allowed". The segment E1EDP01 for sub item is highlighted in red in inbound idoc in
system B. The segments are the same for inbound idoc in B and outbound idoc in A.
Can someone pls tell what is wrong in system B.(config or data issue) as we are managing both systems.
regds
Edited by: sapsd73 on Jul 9, 2010 3:26 PM
Edited by: sapsd73 on Jul 9, 2010 3:27 PM

I do not see any reason why you would need to use COND_A04 if COND_A01 is working.
What if you could get COND_A04 to post and you would face the same result as in COND_A01?
If SAP does not check wrong values, then you have to do it yourself, or you report an incident at SAP (after you have searched for OSS notes that may have fixed this error already)
For example OSS Note 1169998 - IDoc: KONP-LIFNR values not checked
fixed a situation where the vendor number was not validated.

Getting error while trying to generate IPA

I am creating an iphone project. While generating the .ipa file from flash builder 4.6. its giving me the below mentioned error.
A fatal error has been dected by Java runtime environment. Please help me asap.

Hi Sani,
Try running resource & ppds ppm consistency check against
their respective transactions (/sapapo/res01 & /sapapo/scc_03)
and check any inconsistencies found.
Regards
R. Senthil Mareeswaran.

File not found error while trying to generate stub using wsdl2java

Hi
I am facing this peculiar problem while generating the stub thru the wsdl2java command.
It shows series of file not found exception.
What all thing need to be set or taken care while we execute the command . anybody having window script for doing this please share it with me.
Your help is higly appreciated
Thanks
Ottran

It could be that the wsdl file is not found if you are invoking this command for a wsdl which is locally existing
Could you send the command and the exception msgs that you are getting
Regards
Mari

Error while trying to assign an empty value

Hi ,
In my bpel process i get an error while trying to assign an empty output to a variable. It occurs in assign activity copy operation. What can i do? How can i skip this? Sometimes there may be null /empty values ...below is the error message
Error in evaluate <from> expression at line "146". The result is empty for the XPath expression : "/ns5:getAccessSwitchResponse/SwitchPortInfo/SwitchID
Thanks in advance
Edited by: Turkmen Mustafa on 27.Haz.2011 04:08

Hi,
No it is not possible. However this issue is resolved in SOA Suite 11g PS3. Where it uses BPEL WS 2.0 standards.
Edited by: user9285225 on Jun 27, 2011 4:42 AM

Comm. error while checking accnt assignment for invoice 8000338378 in syste

Hi all,
Comm. error while checking accnt assignment for invoice (8000338378) in system .
But every thing is good.but we are geting error list above error
Reagrds,
Srikanth

Hi Praveen and all,
Thanks for your replies.
I tried doing setting with VKOA and checked with
VF02, Environment-Account determination analysis.
--> it says account determination is found.
Then i clicked the Flag button(Release to accounting) in VF02.
It gives below error in status bar
<b>"only output tax is allowed for account 175000 JTC1, E0 is not allowed"</b>
How to go ahead or solve this error.
suggest me please.
regards
Ambichan

"error while trying to synchronize Audio and MIDI"

Hello All,
Just got Logic 8... installed (as upgrade from 7)
I keep (consistantly) getting this:
"error while trying to synchronize Audio and MIDI" when in play or record mode... has anyone any ideas regarding a 'fix' or maybe even to point out stupidity on my part re settings; I'm open to comments here and would obviously love to get this fixed/sorted out.
System is basically: G5 Dual 1.8/OS 10.4.10/MOTU 828 Mk2
Thanks in advance.

Hi,
I first did what the manual was telling me but that made no difference as the sync would drop within 5 to 15 bars... very frustrating.
Since my original posting I have spoken with MOTU regarding this Audio/MIDI sync problem. There is evidently a simple reset that needs to be done (that is if like me you are using a MOTU 828 Mk2 interface), you have to toggle through both digital input and output settings in the Audio Control Panel. The problem then goes away.
I hope that is helpful. I think that this probably is relevant to all MOTU interfaces, or is at least worth trying if you are having this problem... maybe other manufacturers too... ?
Cheers, Kick

Error while trying to create a new company

Hey All
I found an error while trying to create a new company.
the Error like - No matching Records Found - [ODBC -2028]
This can generate only database but not any tables in that database.
Please help me.
Thanking you
Hepil Doshi

Hello,
I would prefer local language instead of US english.....
My tips.
1. DID you tried to Not apply the UDO/UDF things?
2. Do not log in to the database, start from
3. Please post the error message itself....
4. If you are running on MS SQL 2005 server (not express) , You can start SQL profiler, and monitor the New Database creation.... you will see in profielr where is the error message and which tables / data is missing.
If i know well,
When you create a new company, the SBO-COMMON database is used to deploy the new database....
If you get stock, reinstall your sbo-common from the last applyied patch..... (Detach SBO-common, move the files another directory, and start upgarder.exe).
Regards,
J.

Error while trying to use Photomerge and stitch a few pictures with Photoshop CC 14 on Windows 8.1

I am getting an error while trying to merge some pictures together using photomerge in photoshop cc14, it says photoshop has encounter an error, and it closes photoshop after that, I cannot use photomerge at all, everything else works fine. Any help anyone???

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Solution for "Error while trying to synchronize Audio and MIDI" and "System Overload" messages

Article for those who hate Logic error windows
Seen in Logic Pro 9.1.7 on Mac OS X Lion 10.7.4
and Logic Pro 9.0.0 on Mac OS X Snow Leopard 10.6.5
Logic Pro:
System Overload.
The audio engine was not able to process all required data in time.
(-10011)
Error while trying to synchronize Audio and MIDI.
Sample Rate xxxxx recognized.
Check conflict between Logic Pro and external device.
The search in the help given as follows: overload occurs when you use a lot of tracks and a lot of effects on them, and the synchronization is lost when the selected MIDI track for recording or playback. Yes, this is all that is written in the resources. And here are useful tips that have been found:
The Bounce function allows the entire instrument track to be recorded as an audio file. This bounced audio file can then be used (as an audio region) on a standard audio track, allowing you to reassign the available processing power for further software instrument tracks. For more details, see "Bouncing Your Project."
You can also make use of the Freeze function to capture the output of a software instrument track, again saving processing power. For details, see "Freezing Tracks in the Arrange Area."
These tips - about the timing. About overload - there are no tips, except as "reducing the number of plug-ins" and "increasing latency". Zero useful tips - I got two errors in the test project with a blank audio track with no effects, MIDI drums and standard synthesizer, it was no aux buses, and the entire project was only a single plugin in the master track.
Here is the configuration of my computer:
iMac12, 2
CPU: Intel Core i5 3,1 GHz
Memory: 4 GB
And here's a project that almost immediately stops Logic, all instruments and plug-ins with the init-patch, ie not the most demanding settings:
It's sad.
When this happened the first time, I could start the project only if the empty audio track has been selected, a track specially designed so that you can at least start the project. Then, this problem has evaporated along with the changing conditions of work and I forgot about it until the last case.
I was looking for the cause of the problem in the console and the system monitor for two days, and finally I found that Logic ping to the network frequently. I remembered the exact time of occurrence of the problem, and system logs revealed that the problems began immediately, as soon as I deactivate the service of the Internet.
Solution: enable the Internet, or add a new network service on a computer with no Internet. I just created the Ethernet connection to the ip address 1.0.0.0
Logic immediately began to sing.

Hi gabaghoul
Yes, it worked for me on four different OS and Logic versions (10.6 - 10.8 and 9.0 - 9.1.6)
It does not work in some cases, hard enough to tell in which one, but you can try, it very easy: go to the net settings and create new Ethernet connection to the ip address 1.0.0.0 and connect LAN cable to the port.
Also you can try to figure out what happens in your system while Logic error occured - fot that you just start Console and search "logicpro"
Pay attention to repetitive events in a console and events with suitable timing, not so far from error
The problem may be related to the GUI or system memory, sometimes turning off Safari (or Chrome, others browsers) might help.
Message was edited by: spred

GarageBand: Error while trying to synchronize Audio and MIDI.

This error recently started popping up for me while using garageband.
GarageBand: Error while trying to synchronize Audio and Midi
Sample rate xxxxxx recognized
Check conflict between garageband and external device
When I use garageband, my input and output are usually set to my scarlett 2i2 interface and I've never received the synchronizing error before today. I am not using any Midi.
I've checked the Audio Midi Setup tool to make sure that my format is at 44100.0Hz and have set the "sound" in system preferences to use my scarlett 2i2 interface for input and built-in system for output.
Can anyone help me out with why i'm receiving this error?

Good grief! I'm on a Mac OS X and was having this same problem. All these discussions about so much technical jargon just had me exhausted ... not only did I not understand what was being referred to, but I couldn't imagine how to do what was being said.
Here's what got me straight:
1. Go to System Preferences and click on Sound
2. Click on Input and select your USB mic (or whatever you're using)
3. Click on Output and select Internal Speakers
Done. No more problem with Garageband!

OperatorClient.jar throws an error while trying to sign in

Hello,
I get this error while trying to sing in in operatorClient.jar:
Signing in: java.security.NoSuchAlgorithmException: RSA/ECB/PKCS1Padding: RSA
OS: CentOS 5.3
Java: 1.6.0.16
Tomcat: 6.0.20

This means the Java that you have installed does not have support for RSA/ECB/PKCS1Padding. What is the full output of "java -version", since I'm wondering if you have the Sun distro installed or something else?

Error while trying to generate tax invoice output

Similar Messages

Maybe you are looking for