Error while trying to get sessionid from webbased webservice
Hi,
I am trying to invoke startSession method of a webbased webserivce and the SOA BPEL process fails with below error.
the input Msg has no variable to be passed, but if I call same method from SOAP UI it returns the session key for that, but same does not work with BPEL invoke operation?
Can anyone help on this issue?
exception on JaxRpc invoke: serialization error: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
Hi,
I am trying to invoke startSession method of a webbased webserivce and the SOA BPEL process fails with below error.
the input Msg has no variable to be passed, but if I call same method from SOAP UI it returns the session key for that, but same does not work with BPEL invoke operation?
Can anyone help on this issue?
exception on JaxRpc invoke: serialization error: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
Similar Messages
-
Error while trying to copy template from another application
Hi,
I am getting this error while trying to copy template from another application:
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
This report is located here:
Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
best regards,It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
I would just as a matter of course reset the TC to factory and redo its setup.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now. -
Getting socket error while trying to get oracle connection using JDBC
hi,
I am getting following socket read error while trying to get database connection using JDBC. This happening with jdk1.5.0_12 version with Oracle 9i
following is the stacktrace...
Thread t@92: (state = IN_NATIVE)
- java.net.SocketInputStream.socketRead0(java.io.FileDescriptor, byte[], int, int, int) @bci=0 (Compiled frame; information may be imprecise)
- java.net.SocketInputStream.read(byte[], int, int) @bci=84, line=129 (Compiled frame)
- oracle.net.ns.Packet.receive() @bci=31 (Compiled frame)
- oracle.net.ns.DataPacket.receive() @bci=1 (Interpreted frame)
- oracle.net.ns.NetInputStream.getNextPacket() @bci=48 (Compiled frame)
- oracle.jdbc.driver.T4CMAREngine.unmarshalSB1() @bci=1, line=1070 (Compiled frame)
- oracle.jdbc.driver.T4CStatement.doOall8(boolean, boolean, boolean, boolean) @bci=617, line=207 (Compiled frame)
- oracle.jdbc.driver.T4CStatement.executeForDescribe() @bci=39, line=790 (Compiled frame)
- oracle.jdbc.driver.OracleStatement.executeMaybeDescribe() @bci=106, line=1039 (Interpreted frame)
- oracle.jdbc.driver.T4CStatement.executeMaybeDescribe() @bci=11, line=830 (Interpreted frame)
- oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout() @bci=128, line=1132 (Interpreted frame)
- oracle.jdbc.driver.OracleStatement.executeQuery(java.lang.String) @bci=76, line=1272 (Interpreted frame)
any help would appreciated. thanks in advanceI do not have exact exception message.
additionally, i have got following the tomcat log file:
INFO - Resource pool cleanup thread just woke up.
Nov 1, 2008 3:41:52 AM org.apache.tomcat.util.threads.ThreadPool logFull
SEVERE: All threads (100) are currently busy, waiting. Increase maxThreads (100) or check the servlet status
INFO - Resource pool cleanup thread just woke up.
thanks in advance -
Error while trying to pick message from weblogic queue
Hi,
We are getting the following error while trying to connect to pick up a message from weblogic queue.
We are suing oracle soa suite 10.1.3.1 and weblogic 8.1
the bad part is that, this error is not documented anywhere and couldn't get much help on this.
Would appreciate any suggestions / pointers on this.
Let me know if any further information is required.
invoke failed
org.collaxa.thirdparty.apache.wsif.WSIFException: file:/E:/product/10.1.3.1/OracleAS_4/bpel/domains/default/tmp/.bpel_OTOCBPELProcess_1.0_78fcf080ec2bd7495aebfb5373e76116.tmp/readmsg.wsdl [ Consume_Message_ptt::Consume_Message(opaque) ] - WSIF JCA Execute of operation 'Consume_Message' failed due to: ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
; nested exception is:
ORABPEL-12115
ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
---------------------------------------------------Hi!
I am facing a similar issue, does someone have an idea ?
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="detail"><detail>null</detail>
</part><part name="summary"><summary>file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_TestReceiveMessage_BPEL_1.0_e00fd88d454889b871183d0d92dc9f7d.tmp/plReceiveMessage.wsdl [ Consume_Message_ptt::Consume_Message(TestPushMessage_BPELProcessRequest) ] - WSIF JCA Execute of operation 'Consume_Message' failed due to: ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
; nested exception is:
ORABPEL-12115
ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
Please examine the log file to determine the problem.
</summary>
</part></remoteFault>
Thanks,
romain. -
Http 404 Error while trying to get the plug-in
Hi,
We have installed the Developer server 6i, and everything was working fine with jinitiator 1.1.7.30.
Recently we have installed Patchset 3A on the machine on which Developer Server was installed and downloaded jinitiator 1.1.8.3. When we try to run the test form from the client machines, we are prompted to get the plug-in 1.1.8.3, and when we click on the "Get the Plug-in", it gives us an HTTP Error 404: "404 Not Found. The Web server cannot find the file or script you asked for. Please check the URL to ensure that the path is correct.Please contact the server's administrator if this problem persists."
The URL is http://<server_name>:port/jinitiator/us/jinit_download.htm?application/x-jinit-applet;version=1.1.8.3
I've checked the virtual mapping of jinitiator, it points to <ORACLE_HOME>/jinit.
Is there anything else that we need to do to get the latest plug-in?
Thanks in advance
LVHi
I am also facing the same error while trying to bring REFOBJ (IBase) context node fields in Interaction Record.
Did you get a reply from SAP about this issue? If yes, can you please state the OSS # ?
Thanks in advance
Vishal -
Error while trying to get the IBase in Interaction Record
We are trying to bring the Ibase component in the Interaction Record and Activity, for that in UI configuration we have enabled the
Ibase and Component field. Once the enter the Ibase id and press enter we are getting the following Short dump.
"An error occured during event processing in view BTSHeader.htm1 of &2 &3"
An exception has occurred
CX_CRM_CIC_PARAMETER_ERROR- Entry parameter ES_KEY of method CL_CRM_GENIL_CONTAINER_OBJECT->GET_KEY contains value , which is not allowed
Method: CL_CRM_GENIL_CONT_SIMPLE_OBJ=>IF_GENIL_CONT_SIMPLE_OBJECT~GET_KEY
Source Text
Row:37Hi
I am also facing the same error while trying to bring REFOBJ (IBase) context node fields in Interaction Record.
Did you get a reply from SAP about this issue? If yes, can you please state the OSS # ?
Thanks in advance
Vishal -
Error while trying to retrieve data from BW BEx query
The following error is coming while trying to retrieve data from BW BEx query (on ODS) when the Characters are more than 50.
In BEx report there is a limitation but is it also a limitation in Webi report.
Is there any other solution for this scenario where it is possible to retrieve more than 50 Characters?
A database error occured. The database error text is: The MDX query SELECT { [Measures].[3OD1RJNV2ZXI7XOC4CY9VXLZI], [Measures].[3P71KBWTVNGY9JTZP9FTP6RZ4], [Measures].[3OEAEUW2WTYJRE2TOD6IOFJF4] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZHOST_ID2].[LEVEL01].MEMBERS, [ZHOST_ID3].[LEVEL01].MEMBERS ), [ZHOST_ID1].[LEVEL01].MEMBERS ), [ZREVENDDT__0CALDAY].[LEVEL01].MEMBERS ) ........................................................ failed to execute with the error Invalid MDX command with UNSUPPORTED: > 50 CHARACT.. (WIS 10901)Hi,
That warning / error message will be coming from the MDX interface on the BW server. It does not originate from BOBJ.
This question would be better asked to support component BW-BEX-OT-MDX
Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
Regards,
Henry -
Getting Bad request error while trying to get a specific document details from c#.
Hi,
While trying to retrieve a specific document details using RESTful WS API from C#, it is throwing "The remote server returned an error: (400) Bad Request" exception.
the request URL i am using for this is like; "http://<Server>:6405/biprws/raylight/v1/documents/1111"
But it is working fine, if i change my request URL to get the dataproviders of the same document like; "http://<Server>:6405/biprws/raylight/v1/documents/1111/dataproviders"
Please let me know if i am missing any thing in first case, getting the details of a specific document, while sending a request to RESTful SDK.
Thanks,
KalyanI think you are using “Content-Type” header or an “Accept” header.
You should be using “Accept: application/xml” for that request
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center
Canada
Follow us on Twitter -
Error while trying to get F4 help for a field mapped to an info object
Hi,
I am getting the following exception while trying to attach a search help to a drop down list box.The field belongs to a table on the BW server which has an explicit search help attached to it.I am getting the following exception:
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_BSP_SERVICES_SHLP', was neither
caught nor passed along using a RAISING clause, in the procedure "_ONCREATE" "(METHOD)" . Since the caller of the procedure could not have expected this exception to occur, the running program was terminated. The reason for the exception is: The input help is not suitable.
As I am new to BW server I am unable to find the solution.Please help me out.
Regards
TejaswiniHi Craig,
I was actually not using the f4 help of the
IF_BSP_SERVICES class. Now I want to implement this as I have got many fields on my page. But I am getting the above mentioned error while doing this. The Code in OnInitialization() is:
data: dataref1 type ref to data.
data:wa_r8t_prog type ZR8T_S_API_PROG_H.
get reference of wa_r8t_prog-ZR8CPRGTY into dataref1.
try.
call method runtime->ddic_utils->get_simple_helpvalues
exporting
data_object_ref = dataref1
changing
helpvalue_tab = t_vallist.
catch cx_bsp_services.
endtry.
But I have a search help attached to 'ZR8T_S_API_PROG_H-ZR8CPRGTY' field
My 'ZR8T_S_API_PROG_H' structure definition is as follows:
.INCLUDE ZR8T_REBATE_PROG 0 0 Rebate Program
ZR8CPRGID /BIC/OIZR8CPRGID CHAR 32 0 Rebate Program ID
COMP_CODE /BI0/OICOMP_CODE CHAR 4 0 Company Code
ZR8CPRGTY /BIC/OIZR8CPRGTY CHAR 5 0 Program type
Can I get f4 help from search help exits or do I have to use only value tables?
Regards
Tejaswini
Message was edited by: Tejaswini Das -
TNS-12518 error while trying to fetch data from SQL Server
Hi everyone,
I'm trying to establish connectivity from Oracle 10.2 server to a SQL Server 2005. These are the server details
DOVER - This is where I installed Oracle Gateway for SQL Server. There's already an Oracle home in this server and I have used the existing listener for the incoming connections
LUNDY - This is where my actual Oracle server resides
HEBRIDES - This is where SQL Server 2005 instance resides, the database name is TRACKIT90
I've set everything as explained in Oracle documentation http://download.oracle.com/docs/cd/B19306_01/gateways.102/b14270/ch2.htm#i1005694 but in the end I'm getting an TNS-12518: TNS:listener could not hand off client connection when I run a test query and this is what it says in the listener.log of DOVER
01-MAR-2010 15:33:19 * (CONNECT_DATA=(SERVICE_NAME=tg4msql)(HS=OK)(CID=(PROGRAM=w:\oracle\product\10.2.0\db_1\bin\ORACLE.EXE)(HOST=LUNDY)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.0.0.58)(PORT=3887)) * establish * tg4msql * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
My initialization parameter under \\ORACLE_HOME\tg4msql\admin of gateway installation in DOVER is as below:
HS_FDS_CONNECT_INFO=hebrides.TRACKIT90
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
The listener.ora of the active listener in DOVER has the following lines, by the way this listener does not reside on the same ORACLE_HOME as the gateway's ORACLE_HOME but it is the current active listener in the server. The listener has also been stopped and started:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dover)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
SID_LIST_LISTENER =
(SID_DESC =
(SID_NAME = tg4msql)
(ORACLE_HOME = E:\oracle\product\10.2.0\tg_1)
(PROGRAM = tg4msql)
The following entry has been added to the tnsnames.ora in LUNDY server where my actual Oracle database resides.
TRACKIT_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = DOVER)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = tg4msql)
(HS = OK)
And finally a database link is created by using the below DDL statement:
CREATE DATABASE LINK "DLINK" CONNECT TO "username" IDENTIFIED BY "password" USING 'TRACKIT_DATA';
When I do a select statement on one of the tables of TRACKIT database by using the following query I got the TNS-12518 error with above details
select * from announcement@dlink;
I would appreciate any help and also please let me know if I missed out any details.
Thanks.This is the output comes with the "lsnrctl service listener" command on DOVER server
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 02-MAR-2010 11:48:55
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "STD81" has 1 instance(s).
Instance "STD81", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:5 refused:0
LOCAL SERVER
Service "STD81" has 1 instance(s).
Instance "std81", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:4234 refused:0 state:ready
LOCAL SERVER
Service "STD81_XPT" has 1 instance(s).
Instance "std81", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:4234 refused:0 state:ready
LOCAL SERVER
Service "tg4msql" has 1 instance(s).
Instance "tg4msql", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:22
LOCAL SERVER
The command completed successfully -
Error While trying to Get XML element(tag) Values
We are trying to get XML element (TAG) value from the XML pay load.
Example.
Getting XML String from a web service and then converting into XML payload.
ora:parseEscapedXML(bpws:getVariableData('signOn_Out','signOnReturn'))
From this XML payload we are trying to get an element (Tag) value.
We are getting following error
Error in evaluate <from> expression at line "130". The result is empty for the XPath expression : "/client:TririgaProcessResponse/client:User/client:LastName".
oracle.xml.parser.v2.XMLElement@118dc2a
{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.
- <selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
- <part name="summary">
<summary>
empty variable/expression result.
xpath variable/expression expression "/client:TririgaProcessResponse/client:User/client:LastName" is empty at line 130, when attempting reading/copying it.
Please make sure the variable/expression result "/client:TririgaProcessResponse/client:User/client:LastName" is not empty.
</summary>
</part>
</selectionFailure>
Here are signOnReturn and XML Payload XSD's
<schema attributeFormDefault="unqualified"
elementFormDefault="qualified"
targetNamespace="http://xmlns.oracle.com/Web1"
xmlns="http://www.w3.org/2001/XMLSchema">
<element name="Web1ProcessRequest">
<complexType>
<sequence>
<element name="userName" type="string"/>
<element name="password" type="string"/>
</sequence>
</complexType>
</element>
<element name="Web1ProcessResponse">
<complexType>
<sequence>
<element name="result" type="string"/>
</sequence>
</complexType>
</element>
</schema>
<?xml version="1.0" encoding="windows-1252" ?>
<schema attributeFormDefault="unqualified"
elementFormDefault="qualified"
targetNamespace="http://xmlns.oracle.com/Web"
xmlns="http://www.w3.org/2001/XMLSchema">
<element name="TProcessResponse">
<complexType>
<sequence>
<element name="result" type="string"/>
<element name="User">
<complexType>
<sequence>
<element name="Id" type="string"/>
<element name="CompanyId" type="string"/>
<element name="SecurityToken" type="string"/>
<element name="FirstName" type="string"/>
<element name="LastName" type="string"/>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
</element>
</schema>I am sure and can see the data in audit trail.
[2006/12/12 09:17:36]
Updated variable "signOn_Output"
- <signOn_Output>
- <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="payload">
- <WebMethodsProcessResponse xmlns="http://xmlns.oracle.com/WebMethods">
<Result xmlns="">
Success
</Result>
- <User xmlns="">
<Id>
2694069
</Id>
<CompanyId>
208133
</CompanyId>
<SecurityToken>
1165936654605
</SecurityToken>
<FirstName>
Jagan
</FirstName>
<LastName>
Rao
</LastName>
</User>
</WebMethodsProcessResponse>
</part>
</signOn_Output>
Copy details to clipboard
[2006/12/12 09:17:36]
Updated variable "tririga"
- <tririga>
- <TririgaProcessResponse xmlns="http://xmlns.oracle.com/WebMethods">
<Result xmlns="">
Success
</Result>
- <User xmlns="">
<Id>
2694069
</Id>
<CompanyId>
208133
</CompanyId>
<SecurityToken>
1165936654605
</SecurityToken>
<FirstName>
Jagan
</FirstName>
<LastName>
Rao
</LastName>
</User>
</TririgaProcessResponse>
</tririga>
Copy details to clipboard
[2006/12/12 09:17:36]
Updated variable "Variable_2"
- <Variable_2>
- <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="payload">
- <TririgaProcessResponse xmlns="http://xmlns.oracle.com/WebMethods">
<Result xmlns="">
Success
</Result>
- <User xmlns="">
<Id>
2694069
</Id>
<CompanyId>
208133
</CompanyId>
<SecurityToken>
1165936654605
</SecurityToken>
<FirstName>
Jagan
</FirstName>
<LastName>
Rao
</LastName>
</User>
</TririgaProcessResponse>
</part>
</Variable_2>
Copy details to clipboard
[2006/12/12 09:17:36]
Error in evaluate <from> expression at line "130". The result is empty for the XPath expression : "/client:TririgaProcessResponse/client:User/client:LastName".
oracle.xml.parser.v2.XMLElement@1c8768e
Copy details to clipboard
[2006/12/12 09:17:36]
"{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.
- <selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
- <part name="summary">
<summary>
empty variable/expression result.
xpath variable/expression expression "/client:TririgaProcessResponse/client:User/client:LastName" is empty at line 130, when attempting reading/copying it.
Please make sure the variable/expression result "/client:TririgaProcessResponse/client:User/client:LastName" is not empty.
</summary>
</part>
</selectionFailure>
Copy details to clipboard -
OIA-OIM Integration, Error while trying to import users from OIM to OIA
Hi Experts,
I have used depreciation method to integrate OIA 11gR1 with OIM 9.1.0.2 BP13.
When I am trying to import Users from OIM to OIA, I am getting the following error: " failed reading the magic number mapping file"
Here are logs. Can anyone tell me what is this error about?
12:28:33,000 DEBUG [QuartzJobListener] OIM1: job about to be executed
12:28:33,000 DEBUG [IAMJob] ******* executing job OIM1 *******
12:28:33,000 INFO [DefaultRemoter] Exec: dwrSchedulerService.getJobStatus()
12:28:33,000 DEBUG [DefaultRemoter] --Object created, not stored. id=0
12:28:33,000 DEBUG [DebuggingPrintWriter] out(46): throw 'allowScriptTagRemoting is false.';
12:28:33,000 DEBUG [DebuggingPrintWriter] out(46): //#DWR-INSERT
12:28:33,000 DEBUG [DebuggingPrintWriter] out(46): //#DWR-REPLY
12:28:33,000 DEBUG [DebuggingPrintWriter] out(46): var s0={};var s1={};s0.currentCount=0;s0.groupName="IAM";s0.job=null;s0.jobName="OIM1";s0.jobStatusId=null;s0.jobType="Import/Export Progress";s0.lastAccessedTime=0;s0.launcher=null;s0.monitorMap=s1;s0.status=1;s0.timeElapsed=0;s0.totalCount=0;
dwr.engine._remoteHandleCallback('20','0',[s0]);
12:28:33,015 DEBUG [IAMJob] ---> executing job 'OIM1' using IAMJobExecutor
12:28:33,015 DEBUG [IAMJobExecutor] found valid iam service
12:28:33,015 DEBUG [IAMJobExecutor] looking for iam server connection 'OIM1'
12:28:33,031 DEBUG [IAMJobExecutor] ----> adding connection defined in config files [dbIAMConnection, fileIAMConnection]
12:28:33,031 DEBUG [IAMJobExecutor] found 3 iam server connections
12:28:33,031 DEBUG [IAMJobExecutor] checking iam server connection 'OIM1'
12:28:33,031 DEBUG [IAMJobExecutor] found matching iam server connection 'OIM1'
12:28:33,031 DEBUG [IAMJobExecutor] found valid iam server OIM1
12:28:33,031 DEBUG [IAMJobExecutor] IAM action specified is ACTION_IMPORT_USERS[2]
12:28:33,031 DEBUG [OIMIAMSolution] In Read Users ...
12:28:33,031 DEBUG [OIMIAMSolution] publishing import starting event...
12:28:33,031 DEBUG [OIMIAMSolution] Starting import run id ---> null
12:28:33,031 DEBUG [OIMIAMSolution] Trying to establish a connection with OIM Server...
12:28:33,031 DEBUG [OIMIAMSolution] ************** OIM Connection Params *************
12:28:33,031 DEBUG [OIMIAMSolution] XL Home ---> E:\Middleware10G_Home\xellerate
12:28:33,031 DEBUG [OIMIAMSolution] login config ---> E:\Middleware10G_Home\xellerate\config\auth.config
12:28:33,031 DEBUG [OIMIAMSolution] Naming Factory Initial ---> : weblogic.jndi.WLInitialContextFactory
12:28:33,031 DEBUG [OIMIAMSolution] Provider URL --> t3://vkalyan-in:7001
12:28:33,031 DEBUG [OIMIAMSolution] ****************************************************
12:28:33,031 DEBUG [OIMIAMSolution] ********** Connecting to OIM Server **********
12:28:33,031 DEBUG [DefaultIAMListener] storing new ImportRun
12:28:33,109 DEBUG [SrmIndexDaemon] Checking Imports or Re-Indexing Activity...
12:28:33,109 INFO [SrmIndexDaemon] Imports or Re-Indexing are Running. Stopping online indexing
12:28:33,156 ERROR [JobRunShell] Job IAM.OIM1 threw an unhandled Exception:
java.lang.ExceptionInInitializerError
at org.jgroups.conf.ClassConfigurator.<clinit>(ClassConfigurator.java:46)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at org.jgroups.stack.ProtocolStack.<init>(ProtocolStack.java:88)
at org.jgroups.JChannel.init(JChannel.java:1568)
at org.jgroups.JChannel.<init>(JChannel.java:257)
at org.jgroups.JChannel.<init>(JChannel.java:240)
at org.jgroups.blocks.NotificationBus.<init>(NotificationBus.java:69)
at com.opensymphony.oscache.plugins.clustersupport.JavaGroupsBroadcastingListener.initialize(JavaGroupsBroadcastingListener.java:113)
at com.opensymphony.oscache.base.AbstractCacheAdministrator.configureStandardListeners(AbstractCacheAdministrator.java:328)
at com.opensymphony.oscache.general.GeneralCacheAdministrator.createCache(GeneralCacheAdministrator.java:305)
at com.opensymphony.oscache.general.GeneralCacheAdministrator.<init>(GeneralCacheAdministrator.java:99)
at com.thortech.xl.cache.OSCacheProvider.initialize(Unknown Source)
at com.thortech.xl.cache.CacheFactory.getCacheProvider(Unknown Source)
at com.thortech.xl.cache.CacheUtil.<clinit>(Unknown Source)
at Thor.API.tcUtilityFactory.getPropertyValue(Unknown Source)
at Thor.API.tcUtilityFactory.<init>(Unknown Source)
at com.vaau.rbacx.iam.oracle.OIMIAMSolution.getUtilityFactory(OIMIAMSolution.java:2542)
at com.vaau.rbacx.iam.oracle.OIMIAMSolution.readUsers(OIMIAMSolution.java:754)
at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.importUsers(RbacxIAMServiceImpl.java:119)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy116.importUsers(Unknown Source)
at com.vaau.rbacx.scheduling.executor.iam.IAMJobExecutor.execute(IAMJobExecutor.java:121)
at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
Caused by: org.jgroups.ChannelException: failed reading the magic number mapping file
at org.jgroups.conf.ClassConfigurator.init(ClassConfigurator.java:101)
at org.jgroups.conf.ClassConfigurator.<clinit>(ClassConfigurator.java:43)
... 38 more
Caused by: java.io.IOException
at org.jgroups.conf.MagicNumberReader.parseClassData(MagicNumberReader.java:89)
at org.jgroups.conf.MagicNumberReader.parse(MagicNumberReader.java:69)
at org.jgroups.conf.MagicNumberReader.readMagicNumberMapping(MagicNumberReader.java:57)
at org.jgroups.conf.ClassConfigurator.init(ClassConfigurator.java:73)
... 39 more
Caused by: java.lang.NullPointerException
at org.jgroups.conf.MagicNumberReader.parseClassData(MagicNumberReader.java:84)
... 42 more
12:28:33,156 ERROR [ErrorLogger] Job (IAM.OIM1 threw an exception.
org.quartz.SchedulerException: Job threw an unhandled exception. [See nested exception: java.lang.ExceptionInInitializerError]
at org.quartz.core.JobRunShell.run(JobRunShell.java:213)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
Caused by: java.lang.ExceptionInInitializerError
at org.jgroups.conf.ClassConfigurator.<clinit>(ClassConfigurator.java:46)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at org.jgroups.stack.ProtocolStack.<init>(ProtocolStack.java:88)
at org.jgroups.JChannel.init(JChannel.java:1568)
at org.jgroups.JChannel.<init>(JChannel.java:257)
at org.jgroups.JChannel.<init>(JChannel.java:240)
at org.jgroups.blocks.NotificationBus.<init>(NotificationBus.java:69)
at com.opensymphony.oscache.plugins.clustersupport.JavaGroupsBroadcastingListener.initialize(JavaGroupsBroadcastingListener.java:113)
at com.opensymphony.oscache.base.AbstractCacheAdministrator.configureStandardListeners(AbstractCacheAdministrator.java:328)
at com.opensymphony.oscache.general.GeneralCacheAdministrator.createCache(GeneralCacheAdministrator.java:305)
at com.opensymphony.oscache.general.GeneralCacheAdministrator.<init>(GeneralCacheAdministrator.java:99)
at com.thortech.xl.cache.OSCacheProvider.initialize(Unknown Source)
at com.thortech.xl.cache.CacheFactory.getCacheProvider(Unknown Source)
at com.thortech.xl.cache.CacheUtil.<clinit>(Unknown Source)
at Thor.API.tcUtilityFactory.getPropertyValue(Unknown Source)
at Thor.API.tcUtilityFactory.<init>(Unknown Source)
at com.vaau.rbacx.iam.oracle.OIMIAMSolution.getUtilityFactory(OIMIAMSolution.java:2542)
at com.vaau.rbacx.iam.oracle.OIMIAMSolution.readUsers(OIMIAMSolution.java:754)
at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.importUsers(RbacxIAMServiceImpl.java:119)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy116.importUsers(Unknown Source)
at com.vaau.rbacx.scheduling.executor.iam.IAMJobExecutor.execute(IAMJobExecutor.java:121)
at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
... 1 more
Caused by: org.jgroups.ChannelException: failed reading the magic number mapping file
at org.jgroups.conf.ClassConfigurator.init(ClassConfigurator.java:101)
at org.jgroups.conf.ClassConfigurator.<clinit>(ClassConfigurator.java:43)
... 38 more
Caused by: java.io.IOException
at org.jgroups.conf.MagicNumberReader.parseClassData(MagicNumberReader.java:89)
at org.jgroups.conf.MagicNumberReader.parse(MagicNumberReader.java:69)
at org.jgroups.conf.MagicNumberReader.readMagicNumberMapping(MagicNumberReader.java:57)
at org.jgroups.conf.ClassConfigurator.init(ClassConfigurator.java:73)
... 39 more
Caused by: java.lang.NullPointerException
at org.jgroups.conf.MagicNumberReader.parseClassData(MagicNumberReader.java:84)
... 42 more
12:28:33,156 DEBUG [QuartzJobListener] OIM1: job was executed
12:28:33,156 DEBUG [VaauSchedulerEventListenerImpl] Processing VaauSchedulerEvent
12:28:33,156 INFO [VaauSchedulerEventListenerImpl] Job executed: OIM1, IAM
12:28:33,156 INFO [VaauSchedulerEventListenerImpl] Job run time: 0s
12:28:33,156 INFO [VaauSchedulerEventListenerImpl] Next Run: null
Regards
KalyanI solved the above error by removing oscache***.jar file and keeping only oscache.jar in lib directory.
However I am getting some other error this time. Let me know if you have any suggestions:
11:27:08,015 DEBUG [QuartzJobListener] job1: job about to be executed
11:27:08,015 DEBUG [IAMJob] ******* executing job job1 *******
11:27:08,046 DEBUG [IAMJob] ---> executing job 'job1' using IAMJobExecutor
11:27:08,046 DEBUG [IAMJobExecutor] found valid iam service
11:27:08,046 DEBUG [IAMJobExecutor] looking for iam server connection 'OIM1'
11:27:08,078 DEBUG [IAMJobExecutor] ----> adding connection defined in config files [dbIAMConnection, fileIAMConnection]
11:27:08,078 DEBUG [IAMJobExecutor] found 3 iam server connections
11:27:08,078 DEBUG [IAMJobExecutor] checking iam server connection 'OIM1'
11:27:08,078 DEBUG [IAMJobExecutor] found matching iam server connection 'OIM1'
11:27:08,078 DEBUG [IAMJobExecutor] found valid iam server OIM1
11:27:08,078 DEBUG [IAMJobExecutor] IAM action specified is ACTION_IMPORT_USERS[2]
11:27:08,078 DEBUG [OIMIAMSolution] In Read Users ...
11:27:08,078 DEBUG [OIMIAMSolution] publishing import starting event...
11:27:08,078 DEBUG [OIMIAMSolution] Starting import run id ---> null
11:27:08,078 DEBUG [OIMIAMSolution] Trying to establish a connection with OIM Server...
11:27:08,078 DEBUG [OIMIAMSolution] ************** OIM Connection Params *************
11:27:08,078 DEBUG [OIMIAMSolution] XL Home ---> E:\Middleware10G_Home\xellerate
11:27:08,078 DEBUG [OIMIAMSolution] login config ---> E:\Middleware10G_Home\xellerate\config\auth.config
11:27:08,078 DEBUG [OIMIAMSolution] Naming Factory Initial ---> : weblogic.jndi.WLInitialContextFactory
11:27:08,078 DEBUG [OIMIAMSolution] Provider URL --> t3://vkalyan-in:7001
11:27:08,078 DEBUG [OIMIAMSolution] ****************************************************
11:27:08,078 DEBUG [OIMIAMSolution] ********** Connecting to OIM Server **********
11:27:08,078 DEBUG [DefaultIAMListener] storing new ImportRun
11:27:08,156 INFO [DefaultRemoter] Exec: dwrSchedulerService.getJobStatus()
11:27:08,156 DEBUG [DefaultRemoter] --Object created, not stored. id=0
11:27:08,156 DEBUG [DebuggingPrintWriter] out(35): throw 'allowScriptTagRemoting is false.';
11:27:08,156 DEBUG [DebuggingPrintWriter] out(35): //#DWR-INSERT
11:27:08,156 DEBUG [DebuggingPrintWriter] out(35): //#DWR-REPLY
11:27:08,156 DEBUG [DebuggingPrintWriter] out(35): var s0={};var s1={};s0.currentCount=0;s0.groupName="IAM";s0.job=null;s0.jobName="job1";s0.jobStatusId=null;s0.jobType="Import/Export Progress";s0.lastAccessedTime=0;s0.launcher=null;s0.monitorMap=s1;s0.status=1;s0.timeElapsed=0;s0.totalCount=0;
dwr.engine._remoteHandleCallback('139','0',[s0]);
11:27:11,187 ERROR [JobRunShell] Job IAM.job1 threw an unhandled Exception:
java.lang.AssertionError: Failed to generate class for com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_1032_WLStub
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:790)
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:779)
at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:74)
at weblogic.rmi.internal.StubInfo.resolveObject(StubInfo.java:226)
at weblogic.rmi.internal.StubInfo.readResolve(StubInfo.java:207)
at sun.reflect.GeneratedMethodAccessor81.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at java.io.ObjectStreamClass.invokeReadResolve(ObjectStreamClass.java:1061)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1762)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at weblogic.rmi.extensions.server.CBVInputStream.readObject(CBVInputStream.java:64)
at weblogic.rmi.internal.ServerRequest.unmarshalReturn(ServerRequest.java:100)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_HomeImpl_1032_WLStub.create(Unknown Source)
at Thor.API.tcUtilityFactory.getUnauthenticatedOperations(Unknown Source)
at Thor.API.tcUtilityFactory.getPropertyValue(Unknown Source)
at Thor.API.tcUtilityFactory.<init>(Unknown Source)
at com.vaau.rbacx.iam.oracle.OIMIAMSolution.getUtilityFactory(OIMIAMSolution.java:2542)
at com.vaau.rbacx.iam.oracle.OIMIAMSolution.readUsers(OIMIAMSolution.java:754)
at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.importUsers(RbacxIAMServiceImpl.java:119)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy114.importUsers(Unknown Source)
at com.vaau.rbacx.scheduling.executor.iam.IAMJobExecutor.execute(IAMJobExecutor.java:121)
at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:788)
... 37 more
Caused by: java.lang.ArrayIndexOutOfBoundsException: 20
at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_1032_WLStub.ensureInitialized(Unknown Source)
at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_1032_WLStub.<init>(Unknown Source)
... 42 more
11:27:11,203 ERROR [ErrorLogger] Job (IAM.job1 threw an exception.
org.quartz.SchedulerException: Job threw an unhandled exception. [See nested exception: java.lang.AssertionError: Failed to generate class for com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_1032_WLStub]
at org.quartz.core.JobRunShell.run(JobRunShell.java:213)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
Caused by: java.lang.AssertionError: Failed to generate class for com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_1032_WLStub
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:790)
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:779)
at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:74)
at weblogic.rmi.internal.StubInfo.resolveObject(StubInfo.java:226)
at weblogic.rmi.internal.StubInfo.readResolve(StubInfo.java:207)
at sun.reflect.GeneratedMethodAccessor81.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at java.io.ObjectStreamClass.invokeReadResolve(ObjectStreamClass.java:1061)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1762)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at weblogic.rmi.extensions.server.CBVInputStream.readObject(CBVInputStream.java:64)
at weblogic.rmi.internal.ServerRequest.unmarshalReturn(ServerRequest.java:100)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_HomeImpl_1032_WLStub.create(Unknown Source)
at Thor.API.tcUtilityFactory.getUnauthenticatedOperations(Unknown Source)
at Thor.API.tcUtilityFactory.getPropertyValue(Unknown Source)
at Thor.API.tcUtilityFactory.<init>(Unknown Source)
at com.vaau.rbacx.iam.oracle.OIMIAMSolution.getUtilityFactory(OIMIAMSolution.java:2542)
at com.vaau.rbacx.iam.oracle.OIMIAMSolution.readUsers(OIMIAMSolution.java:754)
at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.importUsers(RbacxIAMServiceImpl.java:119)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy114.importUsers(Unknown Source)
at com.vaau.rbacx.scheduling.executor.iam.IAMJobExecutor.execute(IAMJobExecutor.java:121)
at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
... 1 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:788)
... 37 more
Caused by: java.lang.ArrayIndexOutOfBoundsException: 20
at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_1032_WLStub.ensureInitialized(Unknown Source)
at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_1032_WLStub.<init>(Unknown Source)
... 42 more
11:27:11,203 DEBUG [QuartzJobListener] job1: job was executed
11:27:11,203 DEBUG [VaauSchedulerEventListenerImpl] Processing VaauSchedulerEvent
11:27:11,203 INFO [VaauSchedulerEventListenerImpl] Job executed: job1, IAM
11:27:11,203 INFO [VaauSchedulerEventListenerImpl] Job run time: 3s
11:27:11,203 INFO [VaauSchedulerEventListenerImpl] Next Run: null -
Error while trying to export data from Solution Manager 3.1
Hello, when trying to export a project via SOLAR_MIGRATION in Solution Manager 3.1, I get the following error when trying to release the transport:
COMMUNICATION_FAILURE for RFC call SCMS_CONT_EXPORT (destination SAPKPROTP): / RfcExecProg: SAP0451.
Error in calling KPro transport server
Has anyone experienced this or have an idea how to reslove it? I opened a message through OSS and received this feedback:
sapkprotp is not available for AS/400.
In your case, sapkprotp must be started on the SAP Content Server.
sapkprotp must then be started via a SAP Gateway connection.
Please change the RFC destination of SAPKPROTP so that
the program must be started on your SAP Gateway on the content server
computer.
We currently don't have a Content Server and I would like to be able to export this project without having to install a new application on a Windows server. I would appreciate any insight you may have into this. Thank you.
~TJIf you don't have one already create a gateway instance on your Content Server.
Change or create the RFC destination : SAPKPROTP type = T
Check the radio button to start on Expicit Host
Enter the program = c:\winnt\sapkprotp.exe
Enter target host - use the hostname of the server for your Content Server
Enter the Gateway information
Regards,
Brian -
Error while trying to access dashboards from EPM
Hi
We integrated OBIEE 10.1.3.4 with EPM 11.2 and when we are trying to access dashboards from EPM we are facing the following error : "Invalid or could not find module configuration."
Please , help us in solving the above issue.
Thanks.Hi all,
The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
In that case, you have to:
1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
Best regards,
Rudolf Hennecke
SAP NetWeaver RIG BI -
after updating to ios 6.1.2 ipad2 ended up in restore mode, i have restored it and now i need this morning's the backup that's only on icloud
but after i login (succesfully) and acept terms & condition popups an error "Connection Error - server error: apple id couldnt be created" or "impossible to login there has been a problem while connecting with server" when it should start setting up the ipad.
any clues on whats going on? i really need this backup. what can i do? there is any other way to restore using the icloud backup from somewhere else?
thankshttps://discussions.apple.com/message/19556552#19556552
Level 1 (0 points)
brandonfromhenderson
This solved my questionRe: Apple ID couldn't be created because of a server error when i try to restore from a backup 13-sep-2012 9:49 (in response to brandonfromhenderson)
Found the solution! Go To Appleid.apple.com and set your birthday and other questons..
Maybe you are looking for
-
I need to create an animated gif banner that can be no more than 50kb in size. I've created about the simplest one that I can, which consists of 8 frames and is made up from some really shrunk down image files (filesize-wise) - and it's coming in at
-
Can't use the credit on my Apple ID
I have purchased a 25$ credit gift card and redeemed it to my Apple ID account on iTunes, but can not purchase anything with it. When I try to buy a song, the Store requests billing information. I have used these cards beofre and never had a proble
-
Hello, We are having image problems when saving. We have a livecycle form that allows people to save an image with an image field and other data in some text fields. The users having problems are using Acrobat Pro XI. They seem to be able to open t
-
Rotated ASCII characters overlap in Text Layout Framework with specific Japanese/Chinese fonts
I am trying to layout rotated text with Text Layout Framework. Mostly okay, but when it comes to specific Japanese/Chinese fonts, problem happens - "hankaku" alphanumeric characters(in other words, ASCII characters) overlap in those fonts. (Full-widt
-
I keep getting an error after downloading the Mavericks upgrade
I have a 2011 mac mini running Lion 10.7.5 that I want to upgrade to mavericks. I have not had it very long so I hardly have anything on it. I have downloaded and installed all of the updates and verified that the hdd is ok and downloaded the free M