Error while trying to install AIA3.0 - Managed Server not found
Hi,
I am trying to install AIA3.0 on soa suite 11g. I have installed soa suite 11g and started the weblogic server, soa_server1 and BAM server (these were 2 managed servers), also the Node manager is running.
However on the screen "Soa Server Details" : when i enter the reqd details like host, domain name, username and pwd..it is not pulling up the list of 'Managed Server' instead in the dropdown it shows that "Cannot connect to the server"
Any pointers what could be wrong here? I have tried entering the host as ip address as well as fullname
Please help
Thanks and Regards
Hi,
Thanks for the replies. However I tried all that was given in the link and the node manager configurations are correct and i could start the soa and bam servers.
however i am getting the same error during installation, is there any specific JDBC/database level configurations or paths that it validates during installation, is a datasource mandatory?
Thanks and Regards
Similar Messages
-
Error while trying to install EBS 12.1.1
We are getting an error while trying to install EBS R12.1.1 on Linux x86_64 os(RHEL 5.2).We are getting the error at step 2 of 5 during database configuration stage 33% (65%) stage.The error is as given below,
RW-50004:Error code received when running external process.Check log files for details.Running Database Install Driver for TEST instance.
We checked the log files and in ApplyDB_****.log the error is
RW-50010 :script has returned an error: 1
How to fix these issues??
Regards,
RupdiptHi Taj,
I am getting these error messages consistently throughout the log file,
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : testerp
sDbDomain : eigl.com
sDbPort : 1521
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@testerp.eigl.com:1521:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST.eigl.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST.eigl.com)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Wed Jul 22 17:47:10 IST 2009
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle/TEST/db/tech_st/11.1.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /d01/oracle/TEST/db/tech_st/11.1.0/perl/bin:/d01/oracle/TEST/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/d01/oracle/TEST/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/d04/StageR12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:.
LD_LIBRARY_PATH : /d01/oracle/TEST/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/TEST/db/tech_st/11.1.0/lib:/usr/dt/lib:/d01/oracle/TEST/db/tech_st/11.1.0/ctx/lib
Executable : /d01/oracle/TEST/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
/d01/oracle/TEST/db/tech_st/11.1.0/appsutil/log/TEST_testerp/adcrdb_TEST.txt
Creating the control file for TEST_testerp database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Wed Jul 22 17:47:11 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size 2166536 bytes
Variable Size 427819256 bytes
Database Buffers 624951296 bytes
Redo Buffers 14000128 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'/d01/oracle/TEST/db/apps_st/data/system05.dbf'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.eigl.com"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size 2166536 bytes
Variable Size 427819256 bytes
Database Buffers 624951296 bytes
Redo Buffers 14000128 bytes
ORA-00205: error in identifying control file, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4652
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size 2166536 bytes
Variable Size 427819256 bytes
Database Buffers 624951296 bytes
Redo Buffers 14000128 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'/d01/oracle/TEST/db/apps_st/data/system05.dbf'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.eigl.com"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.1.0.7.0 - Production on Wed Jul 22 17:47:20 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
.end std out.
.end err out.
Whats the solution??
Regards,
Rupdipt -
Error while trying to install SAP CE 7.1 EHP 1 on Windows 7
I am trying to install SAP CE 7.1 EHP 1 on Windows 7. I am getting below error while trying to install. can you please help to fix this problem?
Running msiexec failed with return code 1603: undefined
Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
If you want the installer to retry, choose Yes. If you want the installer to abort the installation, choose No.
Thanks,
Sridhar.I donu2019t think so it is windows 7 or 64/32 bit hardware/software issue. I have faced u201Cmsiexec failed with return code 1603u201D error many times during SAP installation and solved this issue with below mentioned procedure.
Solution:
Just change the location of temp directory to empty folder in user environment variable without cancel installation in current user session. After that, click on yes button to continue the installation. If installation will ended after click on yes button, restart the installation with continue old installation option.
Regards.
Yasir -
receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7
There isn't much here which is actionable. Please review your installation logs by following the steps listed at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.
-
Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only
After installation fo ECC6,When I am trying to connect to visual admin,I am getting given below error.
I am also not able to login to NWA
Application cannot be started.
Details:
com.sap.engine.services.deploy.container.ExceptionInfo: Naming error.
System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400010000000001A6B16F0004A600094A9828#1308418992937#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-13,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Cannot authenticate the user.#
#1.5#C000C0A8016400020000000001A6B16F0004A6000C292AF0#1308419041078#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-24,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400030000000001A6B16F0004A6001D1853B8#1308419325187#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-35,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400000000000001CA1A680004A6008F78FF48#1308421244125#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-2,5,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400010000000001CA1A680004A600919BB068#1308421279953#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-13,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Cannot authenticate the user.#
#1.5#C000C0A8016400020000000001CA1A680004A6009220F598#1308421288687#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-24,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
#1.5#C000C0A8016400030000000001CA1A680004A60097A70598#1308421381359#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-35,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Cannot authenticate the user.#
#1.5#C000C0A8016400040000000001CA1A680004A6009867E880#1308421394000#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-46,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Cannot authenticate the user.#
#1.5#C000C0A8016400000000000001402EEB0004A600E643EE28#1308422700265#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-2,5,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only role administrators is allowed to access JMX#
Any help would be highly appreciated.
Thanks
SukrutHello,
If you have a installation of dual stack(ABAP + JAVA) system.. check in SU01 transaction if SAP_J2EE_ADMIN role is assigned to the J2EE_ADMIN user. If not, please assign it.
For only JAVA stack systems, default administrator user is Administrator.
thanks
ashish -
Error while trying to install Oracle 8.15 on Redhat 6.1
I have been trying to install Oracle 8i (8.15) on my machine but I got an error while trying to run runInstaller:
Initializing java virtual machine from /usr/local/jre/bin/jre. Please wait
Error in CreateOUIProcess(): -1
: Bad Address
FYI:
- I downloaded the Oracle 8i from the technet download site (I am not using a CD)
- I am using Redhat 6.1
- I downloaded and installed JRE as advised in the documentation.
- My machine is a AMD K6, so is non-intel but I have not noticed any other problems using Redhat.
- I currently only have 96MB RAM as opposed to the recommended 128MB.
Please Help!!!
null(All comments are based on redhat 6.0, not sure about other distros)
If u are only using one linux machine, then I don't think you need to have 'DISPLAY' defined. Unset it then. This variable tells X clients where to display its X output. If unsetting does not make it work, then try 'export DISPLAY=ip_address:0.0' and then 'xhost +ip_address', where ip_address is the IP of your machine, or try 127.0.0.1.
If u have two linux machines, like what I did:
* Ran X on client machine (192.168.0.2).
* Telnet to server machine (192.168.0.1 - where 8i will be installed), login as 'oracle'
* On the telnet session, I 'su' as root then mounted the CD, then 'exit' to return to the 'oracle' login on the telnet session.
* On the telnet session, I did 'export DISPLAY=192.168.0.2:0.0' - telling it that all X clients on this telnet session will send its X output to the host on 192.168.0.1.
* On the client machine (where X is running), opened another shell, did a 'xhost +192.168.0.1' - telling the X server on the client machine to accept X connections from the server machine (192.168.0.1).
* Went back to the telnet session to the server machine, then ran the installer.
In short, everything you do can be done remotely, apart from putting the CD on the server machine.
The installer runs on the server but send its output to the client.
null -
Error while trying to install SAP 8.8 Pl 10 Server on Windows 7
Hellow All,
I am facing the problem while trying to instal the Server and Server Tool os SAP 8.8 Patch Level 10 on the windows server.It is displaying the error failed to installed:1628 error evertime I try to run the Server Installer.
regards,
pankajkDear,
Check the below link:
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1434624&nlang=E&smpsrv=https%3a%2f%2fwebsmp110%2esap-ag%2ede
Thanks,
Neetu -
1603 error while trying to install skype
I'm having an issue while trying to install Skype on this computer, when I try to install it, it pops up and says "Object Already Exists" and then I get a second window saying "Error 1603 has occured: Fatal Error During Installation." I had Skype and it told me I needed to update so I clicked it and I've been getting this message ever sense. I tried to find Skype to uninstall it but after clicking that update the program was gone. So I went into Program files and deleted all skype related things and tried to download and install again. Got the same message. Please help!
You have to reboot for that fix to work. If you already did this then for whatever reason the solution didn't work on your machine (possibly due to some other corruption). The issue you are having is not Skype based but Windows/OS installer based. Try to install the latest Windows updates to see if that will fix the issue as newer Windows updates were designed to address that problem. If you have already tried that then remove the problematic Windows updates that causes this issue on some computers.
http://community.skype.com/t5/Windows-desktop-client/Skype-Installation-fatal-error-1603/td-p/366472... -
Error 109, network connection error while trying to install cs6 trial
I am getting a error as described above while trying to install the CS6 trial. First time install on a new computer with Vista.
any advice/ help..? ThankshI Atul_Soni
Error 109 indicates there were problems with your network connection. Please try initiating a direct download by following the steps listed athttp://forums.adobe.com/thread/981369. If you continue to experience difficulties then you may want to try an alternate Internet connection...
For other error codes, please see the below link : http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assista nt.html
Reasons and Solutions are provided in the above link. -
Error while trying to install WS2012 R2 Essentials evaluation copy
While trying to install (Setup.exe) the evaluation copy of Windows Server 2012 R2 Essentials which I downloaded from the Microsoft site, after clicking on install and the temporary files start to unpack, I received the following error:
Windows cannot open required file C:\Users\Donald\Desktop\Windows Server 2012 Essentials\9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US-DV5\Sources\install.wim. Make sure all files required for installation are
available, and restart the installation. Error code: 0x8007000B
I checked in the sources folder and install.wim is present. Should I suspect the file is corrupt? This was extracted from the downloaded 9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5.ISO file.
ThanksHi,
As Dave mentioned, maybe the ISO is corrupted. Please try to download it again to see if the issue persists.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support -
Getting error while trying to install ADRMS role on Windows Server 2008 R2 SP1.
Hello,
I am trying to install ADRMS on Windows Server 2008 R2 SP1 (This machine also has domain controller and Exchange Server 2010 SP3 installed). But I am getting following error:
Install-ADRMS : The configuration object is read only, because it has been committed by a call to ServerManager.CommitChanges().
If write access is required, use ServerManager to get a new reference. at Microsoft.Web.Administration.Configuration.SetDirty()
Not sure what is causing this error. Any help to solve it would be appreciated.
Thanks.
Jigar MehtaHello,
I am trying to install ADRMS on Windows Server 2008 R2 SP1 (This machine also has domain controller and Exchange Server 2010 SP3 installed). But I am getting following error:
Install-ADRMS : The configuration object is read only, because it has been committed by a call to ServerManager.CommitChanges().
If write access is required, use ServerManager to get a new reference. at Microsoft.Web.Administration.Configuration.SetDirty()
Not sure what is causing this error. Any help to solve it would be appreciated.
Thanks.
Jigar Mehta -
Access denied error while trying to install graphics drivers
Hello,
I have a new toshiba laptop P70-A. I have installed windows 7 and the pc was working excellent up until now. Noticed yesterday that the nvidia automated system failed to install the new update. When I tried to install the new driver manually, even from the
device manager, I got the access denied message.
A day now wasted reading all the possible causes and solutions but with no luck. Read all the forums and all the posts, tried almost everything. Below youll find everything I tried as a solution and failed.
1.Disabled UAC
2.Enabled the administrator account and trying to take control from there
3.Run the subinacl and the reset.cmd
4.Tried manually to take control the folder windows (and access denied while changing the rights)
5. Scanned the system with everything there is available ( Kaspersky, MalwareBytes, RegCurePro, Tuneup Utilities, CCleaner) The system came out clean.
6. Tried restoring the system to an earlier time (got again access denied error code 0x80070005)
7. Checked all the group policies (all seem to be fine)
8. Run a script to take immediate ownership over all of C:
TAKEOWN /A /F C:
then the next one
TAKEOWN /F C:
9. With subinacl I run all the above scripts... (still nothing changed)
@echo off
title Resetting ACLs...
echo.
echo Determine whether we are on an 32 or 64 bit machine
echo.
if "%PROCESSOR_ARCHITECTURE%"=="x86" if "%PROCESSOR_ARCHITEW6432%"=="" goto x86
set ProgramFilesPath=%ProgramFiles(x86)%
goto startResetting
:x86
set ProgramFilesPath=%ProgramFiles%
:startResetting
echo.
cd /d "%ProgramFilesPath%\Windows Resource Kits\Tools"
echo.
echo Resetting ACLs...
echo (this may take several minutes to complete)
echo.
echo IMPORTANT NOTE: For this script to run correctly, you must change
echo the values named Athena to be the Windows user account that
echo you are logged in with.
echo.
echo ==========================================================================
echo.
echo.
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=Athena=f /setowner=administrators > %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=Athena=f /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
echo System Drive...
subinacl /subdirectories %ProgramFilesPath%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
echo.
echo.
echo Windows Directory...
subinacl /subdirectories %windir%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
echo.
echo.
echo ==========================================================================
echo.
echo FINISHED.
echo.
echo Press any key to exit . . .
pause >NUL
Im frustrated really... ANY help at all would be really appreciated.
Thanks in Advance and sorry for the long post
AthenaHello,
Thanks for the replies, i much appreciate it. I tried all of the above with no luck again. Safe mode allows me though to install drivers but thats reverting the moment im entering windows. Im always running commands and programs as a administrator or in
the Admin enabled account.
It seems the problem is solved today. Via tune up utilities I disabled most of the startup programs and services and it seems that 1 service is causing this issue. Although I havent played much with the disabled services but 3 remain to be checked. One of
the three is causing this.
Thanks again guys and Ill keep you posted about the soft. conflict.
Athena -
Error while trying to install printer on Airport Express
Hi,
I'm trying to install a HP Deskjet 3930 on my Macbook through the Airport Express. I'm getting an error:
An error occured while trying to add the selected printer Error:-9672
Anyone have any ideas?BINGO!!
After trying every driver possible (and there were many...), I finally got my HP Deskjet 3930 to print through Bonjour. Here's how:
1. Reset the printing system with Printer Setup Repair from fixamacsoftware.com
2. Add a new printer with Printer Setup Utility
3. Select the HP 3930 connected through Bonjour
4. Instead of using the default HP driver, select the HP PSC 1110 Foomatic/hpijs driver (available at http://www.linuxprinting.org/macosx/hpijs/)
I've tested the printer on a variety of print jobs and so far everything seems to be working smoothly. I should probably note that this driver does not grant access to the printer utilities, but at least it works.
Hopefully someone finds this useful.
Macbook Pro Mac OS X (10.4.7) -
Error while trying to get Property Set Management in 3.2
Hi,
Using WLS 5.1 with sp6 and using WLCS 3.2. When I go into the
Administration Tools Home Page and click on the Property Set Management
I get the following errors. I just installed WLCS 3.2 and I'm trying
to run the Tour by "adding properties within a property set".
Wed Mar 14 09:35:26 MST 2001:<E> <WebAppServletContext-tools> Servlet
failed with Exception
weblogic.servlet.jsp.JspException: (line -1): Error in tag library at:
'wl': For tag 'repeat', cannot load extra info class
'weblogicx.jsp.tags.RepeatTagInfo'
at
weblogic.servlet.jsp.StandardTagLib.jspException(StandardTagLib.java:138)
at
weblogic.servlet.jsp.StandardTagLib.processTag(StandardTagLib.java:201)
at
weblogic.servlet.jsp.StandardTagLib.processTagElements(StandardTagLib.java:146)
at weblogic.servlet.jsp.StandardTagLib.<init>(StandardTagLib.java:125)
at weblogic.servlet.jsp.JspLexer.loadTagLib(JspLexer.java:87)
at
weblogic.servlet.jsp.JspLexer.mTAGLIB_DIRECTIVE_BODY(JspLexer.java:3739)
at weblogic.servlet.jsp.JspLexer.mTAGLIB_DIRECTIVE(JspLexer.java:3495)
at weblogic.servlet.jsp.JspLexer.mDIRECTIVE(JspLexer.java:3356)
at weblogic.servlet.jsp.JspLexer.mSTANDARD_THING(JspLexer.java:1694)
at weblogic.servlet.jsp.JspLexer.mTOKEN(JspLexer.java:1535)
at weblogic.servlet.jsp.JspLexer.nextToken(JspLexer.java:1425)
at weblogic.servlet.jsp.JspLexer.parse(JspLexer.java:825)
at weblogic.servlet.jsp.JspParser.doit(JspParser.java:69)
at weblogic.servlet.jsp.JspParser.parse(JspParser.java:116)
at weblogic.servlet.jsp.Jsp2Java.outputs(Jsp2Java.java:97)
at
weblogic.utils.compiler.CodeGenerator.generate(CodeGenerator.java:242)
at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java:265)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:180)
at
weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:181)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:118)
at
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:154)
at
com.beasys.commerce.foundation.flow.ServletDestinationHandler.handleDestination(ServletDestinationHandler.java:51)
at
com.beasys.commerce.foundation.flow.FlowManager.service(FlowManager.java:448)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:123)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:761)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:708)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:252)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:346)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:246)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135)Fixed the problem I didn't have the weblogic-tags-510.jar from WLS 5.1 service pack 6.
Letty Campbell wrote:
Hi,
Using WLS 5.1 with sp6 and using WLCS 3.2. When I go into the
Administration Tools Home Page and click on the Property Set Management
I get the following errors. I just installed WLCS 3.2 and I'm trying
to run the Tour by "adding properties within a property set".
Wed Mar 14 09:35:26 MST 2001:<E> <WebAppServletContext-tools> Servlet
failed with Exception
weblogic.servlet.jsp.JspException: (line -1): Error in tag library at:
'wl': For tag 'repeat', cannot load extra info class
'weblogicx.jsp.tags.RepeatTagInfo'
at
weblogic.servlet.jsp.StandardTagLib.jspException(StandardTagLib.java:138)
at
weblogic.servlet.jsp.StandardTagLib.processTag(StandardTagLib.java:201)
at
weblogic.servlet.jsp.StandardTagLib.processTagElements(StandardTagLib.java:146)
at weblogic.servlet.jsp.StandardTagLib.<init>(StandardTagLib.java:125)
at weblogic.servlet.jsp.JspLexer.loadTagLib(JspLexer.java:87)
at
weblogic.servlet.jsp.JspLexer.mTAGLIB_DIRECTIVE_BODY(JspLexer.java:3739)
at weblogic.servlet.jsp.JspLexer.mTAGLIB_DIRECTIVE(JspLexer.java:3495)
at weblogic.servlet.jsp.JspLexer.mDIRECTIVE(JspLexer.java:3356)
at weblogic.servlet.jsp.JspLexer.mSTANDARD_THING(JspLexer.java:1694)
at weblogic.servlet.jsp.JspLexer.mTOKEN(JspLexer.java:1535)
at weblogic.servlet.jsp.JspLexer.nextToken(JspLexer.java:1425)
at weblogic.servlet.jsp.JspLexer.parse(JspLexer.java:825)
at weblogic.servlet.jsp.JspParser.doit(JspParser.java:69)
at weblogic.servlet.jsp.JspParser.parse(JspParser.java:116)
at weblogic.servlet.jsp.Jsp2Java.outputs(Jsp2Java.java:97)
at
weblogic.utils.compiler.CodeGenerator.generate(CodeGenerator.java:242)
at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java:265)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:180)
at
weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:181)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:118)
at
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:154)
at
com.beasys.commerce.foundation.flow.ServletDestinationHandler.handleDestination(ServletDestinationHandler.java:51)
at
com.beasys.commerce.foundation.flow.FlowManager.service(FlowManager.java:448)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:123)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:761)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:708)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:252)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:346)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:246)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135) -
HT203175 Why am I getting an Error while trying to install itunes
After a recent itunes update I started getting an error about other software interferring with itunes (I had not installed any other software) I was told to try reinstall itunes.
When I try to reinstall itunes I get an error that says "The feature you are trying to use is a network resource that is unavailable" I also get this eroor message if I try to uninstall itunes.
I am not on a network! I never have been! This is just my Home use PC laptop.
Everything else on this computer seems to be working fine.
So now I have no itunes on my PC laptop at all.
Does anyone have any idea whats going on or how to fix this problem?
Thanks
RonWhen I try to reinstall itunes I get an error that says "The feature you are trying to use is a network resource that is unavailable" I also get this eroor message if I try to uninstall itunes.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
How can i update data of DSO and Cube using ABAP??
Hello Experts I have a requrement in which i need to update/ delete data from DSO and cube based on certain keys using ABAP. Please let me know how can i modify contets of cube or active table of DSO. Thanks Sudeep
-
Creating a WSDL from a perfectly working Logical DS in ALDSP 3.2
i am just running to a small issue, i have a created a group of logical Data services. each having its own functionality. it is tested several times and is in fine working condition. i have to create a WSDL from this. these were the steps i followed.
-
I'm in the process of adding lyrics to my music files (>26,000). Quite a few of my music files are instrumental only, and do not have any lyrics. I'd like to indicate the lyrics as "Instrumental," but don't want to have to press Option+I and manually
-
Combining taxonomies + XML Forms
I would Like to use a form from "XML Forms" and Taxonomies For Example, I made a form about Tecnology, and when a save this form, I woud like to distribute in folders, related with the subject... How to do that ?
-
Im having problems when I sync my ipod when it tries to sync photos it says can not sync certain photos because they can not be displayed on you ipod, but these pics Im downloading have already been on my ipod I accidently deleted them but now I cant