Error while trying to install Crystal Reports XI

Hey there,
I am trying to install this on to my server but I keep getting this error:
Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 11\win32_x86\plugins\auth\secLDAP\secldap.dll failed to register.  HRESULT-2147024770. Contact your support personal.
Can anyone on here offer any advise on what the problem could be?
Thx

Hello Shawn,
it looks like an older version was maybe installed on this system before.
I recommend to use a registry clean tool like [REGCLEAN|http://www.regclean.com/?hop=publish2] and to install again.
Hope this helps
Falk

Similar Messages

  • Error while trying to install Crystal Reports 2008 SP3

    Has anyone else come across this error before when running the SP3 update installer;
    Crystal Reports 2008 SP3 Update is not allowed to install because a patch with a higher version was detected.
    The installation then terminates.  There has been nothing installed on this server to do with Crystal, aside from CR2008, SP1 and then the attempt at SP3.
    ANY help appreciated
    Edited by: Ludek Uher on Aug 18, 2010 2:07 PM

    Priyanka,
    I'm already extremely annoyed that a new server build requires installation of CR2008, then SP1 before SP3 will even allow installation.  Adding SP2 into the mix just makes it seem like none of the developers tested anything (which I'm seeing from just about every software company I deal with these days).
    Besides, the 'SAP Business Objects Support Software Downloads' page no longer lists SP1 or SP2 as available downloads, so I'm going to have to try Don's solution first.
    Regards.

  • Error while trying to open crystal report with SAP B1 8.8

    Hello Experts
        I found one problem when I open my Crystal Report from SAP B1 8.8 then it gives me error like
       "Failed to retrieve data from database.  Details : [Database Vendor Code : 156]"
       This report perfectly work while open in crystal report outside from SAP.    
    Waiting for your replies...
    Hepil Doshi

    Dear Experts,
    I face the exactly same problem, please forgive if i am not suppose to ask the same question in other people thread.
    I am using SAP 8.8, PL09, SQL Server 2005, the Crystal Report is working perfectly after import into SAP B1.
    However, when i do the same configuration in my customer server, the error message prompt:
    Failed to retrieve data from the database.
    Detail: [Database Vendor Code: 156]
    Failed to retrieve data from the database.
    Error in File Temp {8090e857-e2a3-4fa9-80dc-9e776e5991b8}{0912E6A5-88EF-406C-BD89-0155AE10F045}.rpt:
    Failed to retrieve data from the database.
    Detail: [Database Vendor Code: 156]
    The server is using SAP 8.8, PL09, with SQL Server 2008.
    Could it be some setting require for SQL Server 2008?
    Please advice.
    Thanks.
    Regards,
    Lay Chin

  • Error while trying to load Crystal report via Windows service

    Hi,
    I am trying to generate PDF file using crystal reports. I have developed a console application which works absolutely fine, however when I converted the code to work as windows service (wcf hosted in Windows service), this below error I see from stack trace:
    Load report failed.
    at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
    at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
    at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
    at AtDataWindowsService.GetData.generatePDF(DataTable dt)
    The code used is:
    CrystalDecisions.Shared.ExportFormatType exportFormat;
    ReportDocument reportObj = new ReportDocument();
    exportFormat = CrystalDecisions.Shared.ExportFormatType.PortableDocFormat;
    //Load the Crystal Report
    reportObj.Load("CrystalReport.rpt");
    reportObj.SetDataSource(dt);
    What might be going wrong here?

    Hello,
    Thank you for your post.
    Based on your description, I am afraid that the issue is out of support of VS General Question forum which mainly discusses
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    I suggest that you can consult your issue directly on SAP Crystal Reports:
    http://scn.sap.com/community/crystal-reports/content?filterID=content~objecttype~objecttype[thread]
      for better solution and support.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Getting an error trying to install Crystal Reports 2008 on a 64 bit Windows

    reformatted my computer and now I'm trying to install Crystal Reports 2008 on 64 bit windows 7 box.  When the "Registering modules" portion of the install comes up, I get a message that a dll has failed to register.  I saw something about not having the Microsoft Visual c++ 2005 redistributable pack (x86) installed but that was not it either.
    The cd label say Crystal Reports to Crystal Reports 2008 Upgrade, but it does not seem like I have to have the older version of Crystal insatlled.
    Any ideas how to fix this ?

    Hello together,
    i've had the same problem. Tried to install CR SP 2 "cr2008win_sp2.exe" onto an existing CR 2008 SP1 installation, and got the above error. After extracting the cr2008win_sp2.exe to an folder using Winzip (or just start Installation, the source would be extracted to "c:\temp" ), navigate to the subfolder "\package" and execute the CrystalReports.msp (in my case: c:\temp\package\CrystalReports.msp). This start's the Installation of SP 2. If you get an version mismatch, use parameter SKIP_PATCH_VERSION_CHECK=1 by typing command in an dos prompt "c:\temp\package\CrystalReports.msp SKIP_PATCH_VERSION_CHECK=1" but remember, you need to have an SP1 installed (somebody said, SP's are incremental).
    Reboot and apply then the  CR 2008 SP2 FixPack 7 "cr2008fp27.exe". Use this Link to Download CR and Xcelsius Stuff:
    [https://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm]
    I would suggest you not to use IE for downloading, use an alternative browser. I got only bad downloads (IE8 on Win7).
    This is the way i did and this works pretty good.
    Good Luck
    Matthias

  • Invalid Key Code when trying to install Crystal Reports XI

    Hi, I was referred to your web site by SAP phone support.
    I am trying to install Crystal Reports Developer XI on a Windows Server 2003 machine, and the key code I retrieved from the service.sap.com site is not being accepted by the installation program. It gives me an error message saying that the key code is invalid or expired.
    What can I do? I tried posting a message to XX-SER-LIKEY-BOF as instructed on service.sap.com but they only answered by giving me the same non-working key code again.
    I tried calling the phone support site, and they instructed me to go to sdn.sap.com. I guess this forum is what they meant.

    I would suggest calling the Customer Service department; you can get the info from the following link:
    http://www.businessobjects.com/company/contact_us/
    Call either the Canadian or USA number. If they can't help you directly, they should be able to tell you who you need to contact to resolve your issue.
    Hope this helps!!
    Regards,
    Shweta

  • Error while trying to install EBS 12.1.1

    We are getting an error while trying to install EBS R12.1.1 on Linux x86_64 os(RHEL 5.2).We are getting the error at step 2 of 5 during database configuration stage 33% (65%) stage.The error is as given below,
    RW-50004:Error code received when running external process.Check log files for details.Running Database Install Driver for TEST instance.
    We checked the log files and in ApplyDB_****.log the error is
    RW-50010 :script has returned an error: 1
    How to fix these issues??
    Regards,
    Rupdipt

    Hi Taj,
    I am getting these error messages consistently throughout the log file,
    Executing CreateDB...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : testerp
    sDbDomain : eigl.com
    sDbPort : 1521
    sDbSid : TEST
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@testerp.eigl.com:1521:TEST
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST)))
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Trying to connect using SID as ServiceName.DomainName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST.eigl.com)))
    Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
    The Connection descriptor used by the client was:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST.eigl.com)))
    Connection could not be obtained; returning null
    -------------------ADX Database Utility Finished---------------
    adcrdb.sh started at Wed Jul 22 17:47:10 IST 2009
    The environment settings are as follows ...
    ORACLE_HOME : /d01/oracle/TEST/db/tech_st/11.1.0
    ORACLE_SID : TEST
    TWO_TASK :
    PATH : /d01/oracle/TEST/db/tech_st/11.1.0/perl/bin:/d01/oracle/TEST/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/d01/oracle/TEST/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/d04/StageR12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:.
    LD_LIBRARY_PATH : /d01/oracle/TEST/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/TEST/db/tech_st/11.1.0/lib:/usr/dt/lib:/d01/oracle/TEST/db/tech_st/11.1.0/ctx/lib
    Executable : /d01/oracle/TEST/db/tech_st/11.1.0/bin/sqlplus
    The log information will be written to
         /d01/oracle/TEST/db/tech_st/11.1.0/appsutil/log/TEST_testerp/adcrdb_TEST.txt
    Creating the control file for TEST_testerp database ...
    SQL*Plus: Release 11.1.0.7.0 - Production on Wed Jul 22 17:47:11 2009
    Copyright (c) 1982, 2008, Oracle. All rights reserved.
    Connected to an idle instance.
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1068937216 bytes
    Fixed Size          2166536 bytes
    Variable Size          427819256 bytes
    Database Buffers     624951296 bytes
    Redo Buffers          14000128 bytes
    CREATE CONTROLFILE REUSE SET DATABASE "TEST"
    ERROR at line 1:
    ORA-01503: CREATE CONTROLFILE failed
    ORA-01565: error in identifying file
    '/d01/oracle/TEST/db/apps_st/data/system05.dbf'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    alter database open resetlogs
    ERROR at line 1:
    ORA-01507: database not mounted
    alter tablespace TEMP1 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp01.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    alter tablespace TEMP2 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp02.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.eigl.com"
    ERROR at line 1:
    ORA-01109: database not open
    ORA-01507: database not mounted
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1068937216 bytes
    Fixed Size          2166536 bytes
    Variable Size          427819256 bytes
    Database Buffers     624951296 bytes
    Redo Buffers          14000128 bytes
    ORA-00205: error in identifying control file, check alert log for more info
    BEGIN dbms_backup_restore.zeroDbid(0); END;
    ERROR at line 1:
    ORA-00210: cannot open the specified control file
    ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4652
    ORA-06512: at line 1
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1068937216 bytes
    Fixed Size          2166536 bytes
    Variable Size          427819256 bytes
    Database Buffers     624951296 bytes
    Redo Buffers          14000128 bytes
    CREATE CONTROLFILE REUSE SET DATABASE "TEST"
    ERROR at line 1:
    ORA-01503: CREATE CONTROLFILE failed
    ORA-01565: error in identifying file
    '/d01/oracle/TEST/db/apps_st/data/system05.dbf'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    alter database open resetlogs
    ERROR at line 1:
    ORA-01507: database not mounted
    alter tablespace TEMP1 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp01.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    alter tablespace TEMP2 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp02.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.eigl.com"
    ERROR at line 1:
    ORA-01109: database not open
    Error Running create/replace library with adupdlib.sql
    ORA-01109: database not open
    PL/SQL procedure successfully completed.
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    exit_code=0
    Checking for errors ...
    The database has not been successfully created. Shutting down the instance ...
    SQL*Plus: Release 11.1.0.7.0 - Production on Wed Jul 22 17:47:20 2009
    Copyright (c) 1982, 2008, Oracle. All rights reserved.
    Connected.
    ORACLE instance shut down.
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    .end std out.
    .end err out.
    Whats the solution??
    Regards,
    Rupdipt

  • Error while trying to install SAP CE 7.1 EHP 1 on Windows 7

    I am trying to install SAP CE 7.1 EHP 1 on Windows 7.  I am getting below error while trying to install. can you please help to fix this problem?
    Running msiexec failed with return code 1603: undefined
    Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
    If you want the installer to retry, choose Yes. If you want the installer to abort the installation, choose No.
    Thanks,
    Sridhar.

    I donu2019t think so it is windows 7 or 64/32 bit hardware/software issue. I have faced u201Cmsiexec failed with return code 1603u201D error many times during SAP installation and solved this issue with below mentioned procedure.
    Solution:
    Just change the location of temp directory to empty folder in user environment variable without cancel installation in current user session. After that, click on yes button to continue the installation. If installation will ended after click on yes button, restart the installation with continue old installation option.
    Regards.
    Yasir

  • Receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7

    receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7

    There isn't much here which is actionable.  Please review your installation logs by following the steps listed at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

  • License problem when trying to install Crystal reports XI on Win 7

    I'm trying to install Crystal Reports XI on a machine with Win 7, the installation in successful on older machines with Win XP.
    I'm trying to upgrade the programs we use at work, but this install fails.
    The installer doesn't accept my old license/registration/activation codes.
    How do I solve that?
    Do we need to buy new licences for our development?
    Is there anyone I should mail about it?

    Hello,
    One problem is XI is not supported on Windows 7. Multiple configuration problems with DEP. You may have to turn it off completely. Search forums on DEP and you'll find lots of postings on how to.
    It's possible the the keycode.dll can not be register. Try copying it to our install folder if it's not there already and then use regsvr32.exe "path to dll.keycode.dll" and then try again.
    If that doesn't work you have a few options, use Process Monitor to see what's missing or upgrade to CR XI R2 ( 11.5 ) for free. Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
    Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
    SP 6 does support Windows 7. Only issue is exporting to MAPI ( Outlook 2007 e-mail ) and it's bee tracked and the fix should be out sometime this year.
    Other common issues is possibly the 1.1 and 2.0 .NET framework is not there or needs to be updated.
    YOU also MUST be a local PC Administrator and have full rights to install programs, browse to the setup.exe and right click on it and then select Run as Administrator, that may fix the issue also.
    Thank you
    Don

  • Error when trying to patch Crystal Report 10

    Hi, I'm having problem when trying to apply patches on PC running on Windows 7 64bit. Below is the error msg I got:
    [http://imageshack.us/photo/my-images/845/errorcy.jpg/]
    It seemed to be something to do with the registry as I was unable to find crystal report entries under ''HKEY_LOCAL_MACHINE\SOFTWARE\Crystal Decisions\Crystal Reports\......" but all the .dll files were found under "C:\Program Files (x86)\Common Files\Crystal Decisions........." though.
    Anyone able to help? Thanks..

    Hello,
    Are you using the full Crystal Reports Designer itself? Or are you using a bundled edition of Crystal Reports that ships with Visual Studio?
    Also, are you trying to patch Crystal Reports 10 itself - the actual report designer? Or are you trying to update runtime files for an application you created using the CR10 runtime files and deployed to a client machine?
    Crystal Reports 10 (full, stand alone version) was never tested on Win7. CR10 reached End of Life for patch support on June 8, 2007. There's no expectation that CR10 will install or work correctly on the Win7 operating system. It's possible that it might work anyway, but I'd be surprised if there weren't any issues.
    If you want to keep trying make sure you're using the correct patch for the product you're using. A patch for the full version of Crystal Reports will not work on a machine that is using the bundled edition of CR that ships with Visual Studio. They're not interchangeable. You didn't say which file you ran when you tried applying the patch.
    Sincerely,
    Dan Kelleher

  • Database error when trying to view Crystal Report from InfoView

    I am receiving the following error when I try to view or run a Crystal Report from the InfoView.  The report is based on an SAP InfoSet.
    "Failed to load database information."
    The report data can be refreshed with no trouble from within the Crystal Reports designer on my local machine, but the error occurs after it is published to the InfoView.  The same error appears when trying to import into Excel using LiveOffice.
    Server details:
    -Edge 3.1
    -Windows 2003 64-bit
    -SAP Integration kit installed
    Local Crystal Reports machine details:
    -Windows XP
    -SAP Integration kit installed
    -Crystal Reports 2008
    My steps to troubleshoot so far:
    -Checked Database Logon details in CMC for the report.  Username and password are entered correctly.
    -Cycled all CrystalReports background services off and on again from the CMC
    -Rebooted server
    Have I missed anything?  Any help would be appreciated.

    Hi,
    do you have any connectivity from your EDGE to the SAP System ? Like can you import roles or run a WebI ?
    Regards
    -Seb.

  • Get error when trying to publish crystal report to infoview

    Hi, Gurus,
    I got an error while trying to publish a Crystal report.
    The error message says: Fail to read data from report file C:\TEMP~crw{70BDE794-E283-4773-A259-BA810F3E1697}.rpt. Failed to read parameter object.
    I'm using a dynamic cascading parameter. The report runs fine in development enviornment.
    I'm using Crystal 2008 SP2 and XI3.1
    Thank you.
    Kiki

    There are several SAP NOTES (KB articles) on this error, have you tried searching Knowledge base ?
    Most likely it's due to the fact that you have a verson mismatch between CR 2008 and XI3.1.

  • Error while trying to install Oracle 8.15 on Redhat 6.1

    I have been trying to install Oracle 8i (8.15) on my machine but I got an error while trying to run runInstaller:
    Initializing java virtual machine from /usr/local/jre/bin/jre. Please wait
    Error in CreateOUIProcess(): -1
    : Bad Address
    FYI:
    - I downloaded the Oracle 8i from the technet download site (I am not using a CD)
    - I am using Redhat 6.1
    - I downloaded and installed JRE as advised in the documentation.
    - My machine is a AMD K6, so is non-intel but I have not noticed any other problems using Redhat.
    - I currently only have 96MB RAM as opposed to the recommended 128MB.
    Please Help!!!
    null

    (All comments are based on redhat 6.0, not sure about other distros)
    If u are only using one linux machine, then I don't think you need to have 'DISPLAY' defined. Unset it then. This variable tells X clients where to display its X output. If unsetting does not make it work, then try 'export DISPLAY=ip_address:0.0' and then 'xhost +ip_address', where ip_address is the IP of your machine, or try 127.0.0.1.
    If u have two linux machines, like what I did:
    * Ran X on client machine (192.168.0.2).
    * Telnet to server machine (192.168.0.1 - where 8i will be installed), login as 'oracle'
    * On the telnet session, I 'su' as root then mounted the CD, then 'exit' to return to the 'oracle' login on the telnet session.
    * On the telnet session, I did 'export DISPLAY=192.168.0.2:0.0' - telling it that all X clients on this telnet session will send its X output to the host on 192.168.0.1.
    * On the client machine (where X is running), opened another shell, did a 'xhost +192.168.0.1' - telling the X server on the client machine to accept X connections from the server machine (192.168.0.1).
    * Went back to the telnet session to the server machine, then ran the installer.
    In short, everything you do can be done remotely, apart from putting the CD on the server machine.
    The installer runs on the server but send its output to the client.
    null

  • Error while trying to install SAP 8.8 Pl 10 Server on Windows 7

    Hellow All,
                       I am facing the problem while trying to instal the Server and Server Tool os SAP 8.8 Patch Level 10 on the windows server.It is displaying the error failed to installed:1628 error evertime I try to run the Server Installer.
    regards,
    pankajk

    Dear,
    Check the below link:
    https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1434624&nlang=E&smpsrv=https%3a%2f%2fwebsmp110%2esap-ag%2ede
    Thanks,
    Neetu

Maybe you are looking for