Error ,while trying to keep position in hold

Hi
i am getting eror while tying to keep position 50001 in hold ,
its saying EE123 is not in employee data base,
i checked the relationship of the EE123 to the position 50001
found this Position 50001 position was reporting to EE123 few years back for 3 days
here is the detail :
POSITION          RELATION          VALIDITY DATE     END VALIDITY DATE
S 0050001      002   S 0050002    01/01/2001                31/12/9999
another
relationship is
P123        0008     S 0050002      01/01/2000          04/01/20001
Please let me know why i m getting error. as employee 123 master data is avilable in data base.
and employee has left the position long back,

Hi Anu,
Can you please provide a screenshot of the operation you wish to do?
Regards,
Liran

Similar Messages

I keep getting an error while trying to reinstall itunes?

I am trying to reinstall itunes and i am having an issue. I keep getting an error while trying to install and I keep getting very far but I always seem to end up with this.
"Could not open key
UNKNOWN\Components\DA42BC89BF25F5BD0AF…
\b25099274a207264182f8181add555d0.
Verify that you have sufficient access to that key, or contact your support personnel"
I was attempting to reinstall due to an error message appearing when I opened itunes
"Itunes requires a newer version of Apple Mobile Device Support Please uninstall
both Apple Mobile Device Support and iTunes, then install iTunes again."
I have tried a few solutions and for the first error when installing one was an attempt at editing a registry file which I do not think succeeded because I am running windows 8 and was being directed for windows 7.

"Could not open key
UNKNOWN\Components\DA42BC89BF25F5BD0AF…
\b25099274a207264182f8181add555d0.
Doublechecking. Have you tried the following user tip?
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?

On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?

Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin

I keep getting an error while trying to access the service

I keep getting an error while trying to access the service

Can you try to use ExportPDF directly on the website https://cloud.acrobat.com/exportpdf
[topic moved to ExportPDF forum]

I keep getting network error while trying to download itunes

i keep getting network error while trying to download itunes

Hey temuera,
Thanks for the question. I understand you are experiencing issues downloading and installing iTunes for Windows. Along with the following article, you may want to attempt downloading with an alternate browser:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

I keep getting "Icloud encountered an error while trying to contact the server "

I keep getting "Icloud encountered an error while trying to contact the server"

Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin

HT4436 When trying to sign in I keep getting the error message, "iCloud encounterd a error while trying to connect to the server". How can I get signed in?

When trying to sign in to iCloud, I always get the message, iCloud has encountered a error while trying to connect to the server. How do I get in????

Hello,
Try following step and check if issue gets resolved or not.
Find Acrobat.exe on your computer. Right click the program and click 'Troubleshoot Compatibility'. Set the compatibility to Windows XP service pack 3.
Regards,
Anoop

I keep getting an error that "iCloud encountered an error while trying to connect to the server". What's up?

I've been getting an error most of the day that says "iCloud encountered an error while trying to connect to the server" on my pc. Also, anything I update on either iPad or iPhone does not update on the other device. What's up?

Hello pongo19,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service as shown below:
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.
Set the Apple Mobile Device Service Startup type to Automatic
Remove and reinstall iTunes and AMDS
Best of luck,
Mario

Error while trying to copy template from another application

Hi,
I am getting this error while trying to copy template from another application:
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
This report is located here:
Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
best regards,

It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
I would just as a matter of course reset the TC to factory and redo its setup.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now.

"Error While Trying To Synchronise Audio And Midi"...non-tempo event found

"Error While Trying To Synchronise Audio And Midi"...non-tempo event found
now when I shutdown Logic And relaunch the Project, the notes hang and "WHAT THE FRIIGIN"
(this was a bug way back when Logic7 was first released)
this is bad!
SvK

Thanks Steven.
big help. In our session we keep getting this problem where the song counter stops, the music keeps playing and we get an error message saying:
Non Tempo-Event found in Sync Reference
We looked in the tempo list and somehow there was a tempo event of 0.00 tempo in there.
We deleted it, got the same error message, but the prob seems to be fixed.
Apple, please fix this!
Thanks
Felix

"error while trying to synchronize Audio and MIDI"

Hello All,
Just got Logic 8... installed (as upgrade from 7)
I keep (consistantly) getting this:
"error while trying to synchronize Audio and MIDI" when in play or record mode... has anyone any ideas regarding a 'fix' or maybe even to point out stupidity on my part re settings; I'm open to comments here and would obviously love to get this fixed/sorted out.
System is basically: G5 Dual 1.8/OS 10.4.10/MOTU 828 Mk2
Thanks in advance.

Hi,
I first did what the manual was telling me but that made no difference as the sync would drop within 5 to 15 bars... very frustrating.
Since my original posting I have spoken with MOTU regarding this Audio/MIDI sync problem. There is evidently a simple reset that needs to be done (that is if like me you are using a MOTU 828 Mk2 interface), you have to toggle through both digital input and output settings in the Audio Control Panel. The problem then goes away.
I hope that is helpful. I think that this probably is relevant to all MOTU interfaces, or is at least worth trying if you are having this problem... maybe other manufacturers too... ?
Cheers, Kick

Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device.

Sometimes, while playing back my software instrument songs, I get an intermittent pop-up error message, saying "Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device."
(Sometimes the five digit number is different, but remains a five-digit number beginning with "4".)
Simultaneously, the song stops until I press the "Okay" button in the pop-up window.
When I continue to play the song, the sound is jerky and clipped, and the playhead doesn't keep up with the song, and then suddenly jumps to the part of the song currently being played.
There's also a sound of static.
The issue seems to occur whether or not I have my MIDI controller turned on and plugged into my desktop Imac.
Tony

Hello,
open your Audio MIDI Setup utility and set the input to 44100
https://discussions.apple.com/message/12710638#12710638

Error while trying to update to ios 5

I keep getting an error while trying to update to iOS 5. I update iTunes this morning to the lastest version so I know that isn't the problem. I have tried restarting both my computer and my phone, but contine getting "The iPhone could not be restore. An unknow error occurred (3194)." PLease help! Thanks in advance

I am also getting the error 43 when the update tries to back the phone up. Im using the latest version of itunes. This is on an iphone4, I am in the UK.
I tried deleting all of the historical backups to see if a fresh backup folder helps. It did not.
Ive tried running iTunes in 'administrator' mode on my Windows 7 machine. This made no difference.
Ive tried putting the phone in airplane mode. No difference.
I tried getting it into restore mode just to see if it worked on a iphone4. However it did not seem to want to do it.
Im not not too sure about proceeding with this update as I done want to loose any of the apps I have. (or 3 my 3 stars in every angry birds level on all 3 versions of the game!!)
Please someone, HELP !! !!

Error while trying to sync audio and video.

Suddenly out of the blue I'm have all sorts of problems with Logic 8. I keep getting the "error while trying to synchronize audio and midi" error message. Even when I'm just using using the audio side. Do you know of a local logic tech that could check out my system? Might be a problem with my motu 828mk11 audio interface or corrupt drivers, bad preferences. I'm unable to do any work in Logic until I get this problem solved.

(Did you do any upgrades with the Firewire plugged in?)
Usually a MOTU reset will fix this.
Follow these steps to restore the 828mkII to Factory Default Settings.
•Disconnect the firewire cable from the 828mkII
•Press the Setup knob
•Turn the Setup knob all the way to the right
•Press the Select knob
•Press the Value knob
•Power off the interface and plug the firewire cable back in
•Power the interface back on
http://www.motu.com/techsupport/technotes/document.2004-06-16.6405589976/view
If that doesn't work.
1) Unplug ALL cables from the 828MkII.
2) Double check that the power cord is really unplugged.
3. Switch the voltage switch on the side from your setting (110 in the US) to the other setting and back a few times.
4) Make sure you've set the voltage switch back to the right setting for your country.
5) Plug everything back in.
pancenter-

How to solve: Error while trying to synchronize Audio and MIDI.

The project consists of an hour long DVD of a play which I have loaded into Logic ( on a MacbookPro) and stripped the audio
and cut it up into regions to name the different parts of the play ( verse/music etc)
Usually I am able to play the project with a small window showing the Movie and watching the audio in the back ground adding markers and notes.
Most of the time this works fine.. but then I get the following message re-occurring every few seconds:
"Error while trying to synchronize Audio and MIDI.
Sample Rate 26848 recognized.
Check conflict between Logic Pro and external device"
There is no MIDI, there is no external device, the Sample Rate is the usual 44.1
Can anyone explain how to stop getting this error message which keeps interrupting workflow?

Hello,
open your Audio MIDI Setup utility and set the input to 44100
https://discussions.apple.com/message/12710638#12710638

Error ,while trying to keep position in hold

Similar Messages

Maybe you are looking for