Error while trying to process multiple Recordsets in Flat file.

Hi All,
I am working on Flat File to Flat File scenario and my structure is as follows.
Recordset
     Record1
          Field1
          Field2
     Record2
          Field3
          Field4
     |
     Record9
          Field5
          Field6
     I am going to receiver multiple Recordsets from my input and need to pass them as output flat file after doing some manipulations in mapping(I am using Java mapping).
     In Moni I am able to see multiple Recordset XMLs created but the message is failing in receiver communication channel with error
"Failed to process message content. Reason: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)' (Software version: 3.0.1)"
     When I am trying to pass Single Recordset I am able to see the output, but when I am trying with multiple Recordsets it is throwing error.
     Can anybody help me in finding the root cause to this problem.
     My Receiver channel Content conversion is as follows.
     RecordsetStructure: Record1,Record2, -- - - ,Record9
          Record1.fieldFixedLengths
          Record1.fieldNames
          Record1.endSeparator so on till Record9
Regards,
Jayaram.G

You might want to check the following things
Are u specifying field names,separators for Record1,Record2..Record9.
Is you occurence repeats after record1..record9 again?
Change your structure occurence as per the runtime data you provide..
See whether your java mapping modifies the structure that does not match with fcc configuration. You might want to pay attention over there too.

Similar Messages

Getting Error while trying to enter multiple records using PA70

Hi all,
While trying to enter multiple records for a custom infotype using transaction PA70,
the system asked to provide details of the custom infotype in T588Q and T588r tables after giving the details i'm able to enter into the custom infotype screen but the Personnel number is defaultly taken as
zero and im not able to change the value and if i click save after entering the other details it is throwing an error telling that Infotype doesnt exist.
Please Help..
Thanks & Regards,
Kumar Madduru

Hi,
Let us know the detailed error text. Probably you haven't included the infotype to maintain in Fast Entry or doesn't have the authorization.
Good Luck
Om

Getting error while trying to delete multiple rows

Hi Experts,
Working in jdev 11.1.1.3.0 with ADF BC and rich faces.
i am trying to delete multiple records from the table, everything is working fine if i use filter or not using horizontal scroll bar of the table. if i try to delete last records on the table and the records are deleting from UI and from the DB also, but i am getting error like
ADFv:Count not find row:_$<to-calc>$_with key:oracle.jbo.key[2333] inside parent: XxwfsAvcardXXXXXXXVO1Iterator with key:null
I have changed my method with the below link
Re: JDev 11g-Multiple Row Selection Table-Ctrl+A error
but till i am getting the same error:
Method:
public void deleteRec(ActionEvent actionEvent) {
// Add event code here...
RowKeySet rowKeySet = (RowKeySet)this.embossTB.getSelectedRowKeys();
CollectionModel cm = (CollectionModel)this.embossTB.getValue();
Row specRow = null;
ArrayList rowList = new ArrayList();
int listLength = 0;
ArrayList<Number> printReqLST=new ArrayList<Number>();
ViewObject vo1=null;
boolean flag=false;
for (Object facesTreeRowKey : rowKeySet) {
cm.setRowKey(facesTreeRowKey);
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)cm.getRowData();
specRow = rowData.getRow();
rowList.add(specRow);
listLength++;
for (int index = 0; index < listLength; index++){
specRow = (Row)rowList.get(index);
Number printReqID = (Number)specRow.getAttribute("PrintRequestId");
String PrintState = specRow.getAttribute("PrintState").toString();
if (PrintState.equalsIgnoreCase("PRINTED")) {
System.out.println("cann't delete");
FacesContext fctx = FacesContext.getCurrentInstance();
FacesMessage message =
new FacesMessage("Cann't Delete the selected row:" + printReqID);
message.setSeverity(FacesMessage.SEVERITY_ERROR);
fctx.addMessage(null, message);
} else {
System.out.println("delete");
flag=true;
specRow.remove();
if(flag){
System.out.println("before commit");
commitRows();
Can any one help me....

Can any one help me...
i written logic in AM but still i am facing the same issue.
can any one help me, is this is bug or coding issue.
If i am not doing scroll down and trying to delete rows then there is no error.... only error is coming when i scroll down and try to delete.
Method:
public void deleteRec(ActionEvent actionEvent) {
// Add event code here...
RowKeySet rowKeySet = (RowKeySet)this.embossTB.getSelectedRowKeys();
CollectionModel cm = (CollectionModel)this.embossTB.getValue();
List<Row> rowsToDelete = new ArrayList<Row>();
for (Object facesTreeRowKey : rowKeySet) {
cm.setRowKey(facesTreeRowKey);
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)cm.getRowData();
Number printReqID = (Number)rowData.getAttribute("PrintRequestId");
String PrintState=rowData.getAttribute("PrintState").toString();
if (PrintState.equalsIgnoreCase("PRINTED")){
System.out.println("cann't delete");
FacesContext fctx = FacesContext.getCurrentInstance();
FacesMessage message =
new FacesMessage("Cann't Delete the selected row:" + printReqID);
message.setSeverity(FacesMessage.SEVERITY_ERROR);
fctx.addMessage(null, message);
} else{
System.out.println("delete");
Row row1 = rowData.getRow();
rowsToDelete.add(row1);
// deletePrintRecords(printReqID);
for (Row row : rowsToDelete){
System.out.println("inside deleting rows");
row.remove();
//commitRows();
System.out.println("After commit from am");
public void commitRows(){
// System.out.println("commit");
DCIteratorBinding embossIter =
ADFUtils.findIterator("XxwfsAvcardEmbossInterfaceVO1Iterator");
ADFUtils.invokeEL("#{bindings.Commit.execute}");
embossIter.getViewObject().executeQuery();
AdfFacesContext.getCurrentInstance().addPartialTarget(embossTB);
Edited by: user5802014 on Sep 3, 2010 11:47 AM
Edited by: user5802014 on Sep 3, 2010 1:07 PM

Error while trying to use Export to create dump-file....................

I am trying to export my portal PAGEGROUP plus other objects under it i.e. pages etc. and followed the instructions listed in:
http://download-uk.oracle.com/docs/cd/B14099_11/portal.1012/b14037/cg_imex.htm#i1030999
but when I run the .cmd script generated through portal after export I get the following error:
Verifying the environment variables...
Verifying the Oracle Client version...
export Mode Selected
Verifying the portal schema passed...
ERROR:
ORA-01017: invalid username/password; logon denied
SP2-0751: Unable to connect to Oracle. Exiting SQL*Plus
Error: Could not connect. Invalid Portal Schema, Password or Connect String
Export/Import aborted.Eventhough I successfully logged-on as a portal user through SQLPLUS / JDEVELOPER and em console. And am giving the same username/password when I run the script but somehow keeps giving me the above error. Here is my export command that I am using:
C:\Export>exportscript.cmd -mode export -s PORTAL -p <portal_password> -pu <portal_username>
-pp <portal_usernamepassword> -company <companyname> -c ORCL -d <dumpdfilename>
here ORCL is the connect_string.
Any help is appreciated.
Thanks

I got it working so please disregard actually the PORTAL password wasn't correct I retrieved the password using the following:
C:\Export>ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w <password> -b "cn=IAS
Infrastructure Databases,cn=IAS,cn=Products,cn=OracleContext" -s sub "orclResou
rcename=portal"and used the value for orclpasswordattribute as a portal password and it worked fine.
Thanks

Getting error while loading Data into ASO cube by flat file.

Hi All,
i am getting this error Essbase error 1270040: Data load buffer[1] does not exist while loading data into ASO cube.
does anyone have solution.
Regards,
VM

Are you using ODI to load the data or maxl? If you are using an ODI interface, are you using a load rule also which version of essbase and ODI are you using
Cheers
John
http://john-goodwin.blogspot.com/

NotSerializable error while trying to write arraylist

I am getting a NotSerializable error while trying to write an arraylist to a file.
Here's the part of the code causing problem
File temp = fileOpenerAndSaver.getSelectedFile(); // fileOpenerAndSaver is a JFileChooser object which has been created and initialized and was already used to select a file with
currentWorkingFile = new File (temp.getAbsolutePath() + ".gd"); // currentWorking file is a file object
try
 ObjectOutput output = new ObjectOutputStream (new BufferedOutputStream(new FileOutputStream(currentWorkingFile)));
 output.writeObject(nodeList); // <-- This is the line causing problem (it is line 1475 on which exception is thrown)
 output.writeObject(edgeList);
 output.writeObject(nodesWithSelfLoop);
 output.writeObject(nextId);
 output.writeUTF(currentMessage);
 output.close();
catch (Exception e2)
 JOptionPane.showMessageDialog (graphDrawer, "Unknown error writing.", "Error", JOptionPane.ERROR_MESSAGE);
 e2.printStackTrace();
} As far as what nodeList is -- it's an arraylist of my own class Node which has been serialized and any object used inside the class has been serialized as well.
Here is the declaration of nodeList:
 private ArrayList <Node> nodeList; // ArrayList to hold a list all the nodesLet me show you whats inside the node class:
private class Node implements Serializable
 private static final long serialVersionUID = -4625153386839971250L;
 /* edgeForThisNodeList holds all the edges that are between this node and another node
 * nodesConnected holds all the nodes that are connected (adjacent) to this node
 * p holds the top left corner coordinate of this node. The centre. of this node is at (p.x + 5, p.y + 5)
 * hasSelfLoop holds whether this node has a self loop.
 * **NOTE**: ONLY ONE SELF LOOP IS ALLOWED FOR A NODE.
 ArrayList <Edge> edgeForThisNodeList = new ArrayList <Edge> ();
 ArrayList <Node> nodesConnected = new ArrayList <Node> ();
 Point p;
 boolean hasSelfLoop = false;
 int index = -1;
 BigInteger id;
 ... some methods following this....
}Here is the edge class
private class Edge implements Serializable
 private static final long serialVersionUID = -72868914829743947L;
 Node p1, p2; // The two nodes
 Line2D line;
 * Constructor:
 * Assigns nodes provided as appropriate.
 * Also calls the addEdge method on each of the two nodes, and passes
 * "this" edge and the other node to the nodes, so that
 * this edge and the other node can be added to the
 * data of the node.
 public Edge (Node p1, Node p2)
 this.p1 = p1;
 this.p2 = p2;
 line = new Line2D.Float(p1.p.x+5,p1.p.y+5,p2.p.x+5,p2.p.y+5);
 p1.addEdge(this, p2, true);
 p2.addEdge(this, p1, false);
 }Here is the error I am getting:
java.io.NotSerializableException: javax.swing.plaf.metal.MetalFileChooserUI
 at java.io.ObjectOutputStream.writeObject0(Unknown Source)
 at java.io.ObjectOutputStream.defaultWriteFields(Unknown Source)
 at java.io.ObjectOutputStream.writeSerialData(Unknown Source)
 at java.io.ObjectOutputStream.writeOrdinaryObject(Unknown Source)
 at java.io.ObjectOutputStream.writeObject0(Unknown Source)
 at java.io.ObjectOutputStream.writeOrdinaryObject(Unknown Source)
 at java.io.ObjectOutputStream.writeObject0(Unknown Source)
 at java.io.ObjectOutputStream.writeObject(Unknown Source)
 at MyPanel.save(MyPanel.java:1475)
 at GraphDrawer.actionPerformed(GraphDrawer.java:243)
 I inentionally did not write the whole error stack because it was way too long and I ran out of characters. But line 1475 is where I do the writeObject call. I also goet some weird not serialized exceptions before on some other classes that are not being written to the file or are not part of the object that I am writing. I serialized those classes and now it's this unknown object that's causing problems.
Edit: The problem may be due to the JFileChooser I am using to select the file as it is a non-serializable object. But I am not trying to write it to the file and in fact am just writing the arrayLists and BigInteger as objects to the file.
Edited by: Cricket_struck on Dec 21, 2009 1:25 PM
Edited by: Cricket_struck on Dec 21, 2009 1:32 PM
Edited by: Cricket_struck on Dec 21, 2009 2:16 PM

java.io.NotSerializableException: javax.swing.plaf.metal.MetalFileChooserUIThat's a Swing component and it is clearly related to the JFileChooser.
I also get some weird not serialized exceptions before on some other classes that are not being written to the file or are not part of the object that I am writing.That's a contradiction in terms. If you get NotSerialzableException it means the objects are being written. So they are reachable from the objects you're writing.
Edit: The problem may be due to the JFileChooser I am using to select the file as it is a non-serializable object.JFileChooser implements Serializable, but you're right, you shouldn't try to serialize it. But clearly this is the current problem. Somewhere you have a reference to it reachable via the object(s) you are serializing.
I suspect that Node and Edge inner classes and that you aren't aware that inner classes contain a hidden reference to their containing class. The solution for serializaition purposes is to make them static nested classes, or outer classes.

Error while trying to retrieve the task: EventId(complete) does not belong

Hi Experts,
I have created a process composer DC in which i have created a process with two human tasks.
Each tasks is binded with web dynpro Iviews (means followed all the steps neccesary).
I deploed the DC successfully. now i started the process and got a task in my UWL but on click of the task i got the below error.
Error while trying to retrieve the task: EventId(complete) does not belong to referenced component interface of ComponentUsage(com.sap.tc.bpem.wdui.appcontainer.containercomp.ContainerComp:com.infosys.mdm.LoadRepositoryComp, createOnDemand=false, childComponent=com.infosys.mdm.LoadRepositoryComp)
[EXCEPTION]
java.lang.IllegalArgumentException: EventId(complete) does not belong to referenced component interface of ComponentUsage(com.sap.tc.bpem.wdui.appcontainer.containercomp.ContainerComp:com.infosys.mdm.LoadRepositoryComp, createOnDemand=false, childComponent=com.infosys.mdm.LoadRepositoryComp)
I have rechecked the event that i have created in the component controller and Interface controller.
Can you please help me in debunging the error.
thanks
Narendra

Hi,
sounds like an program error. That is an problem which occurs if one or multiple components try to lock the same galaxy object at the same point in time. Did you configured something special on the given task? e.g deadlines?
My proposal is to open an Customer Message so that we can have a detailed look onto the system. If this is not possible could you please provide the complete trace file and some more details about the modeled task?
Best Regards
Andreas

BPM throws: "Error while trying to retrieve the task"

Hi,
 
When clicking on a task(WD-UI) in UWL, BPM throws an error message: 
Error while trying to retrieve the task 
Though, I am able to open up the task when I restart the server ( CE 7.1 EHP1 SP04 patched).
 
Anyone an idea?
 
Regards,
 
Wesley
 
The log file presents the following information (partially):
 
Caused by: java.lang.IllegalStateException: com.sap.glx.core.kernel.api.TransitionRollbackException: Exception during prepare, rolling back
at com.sap.bpem.tm.adapter.core.TaskAdapter$TicketSynchronization.beforeCompletion(TaskAdapter.java:581)
at com.sap.engine.services.ts.jta.impl.SynchronizationWrapper.beforeCompletion(SynchronizationWrapper.java:27)
at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:234)
... 86 more
Caused by: com.sap.glx.core.kernel.api.TransitionRollbackException: Exception during prepare, rolling back
at com.sap.glx.core.kernel.mmtx.AbstractTransactionBase.rollback(AbstractTransactionBase.java:544)
at com.sap.glx.core.kernel.mmtx.AbstractTransaction.do_prepare(AbstractTransaction.java:174)
at com.sap.glx.core.kernel.mmtx.AbstractTransaction.commit(AbstractTransaction.java:77)
at com.sap.bpem.tm.adapter.core.TaskAdapter$TicketSynchronization.beforeCompletion(TaskAdapter.java:579)
... 88 more
Caused by: com.sap.glx.core.kernel.trigger.TriggerLockingException: Cannot acquire lock for update <Context_0_TaskAttributes_ac33d162fa908f8198b3c740708bb6c5{919e4f4b-1581-11df-c72f-02004c4f4f50}(Instance_0_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f45-1581-11df-b4f9-02004c4f4f50}(?),Scope_13_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f4a-1581-11df-94e6-02004c4f4f50}(?),3,true)|Context_0_TaskAttributes_ac33d162fa908f8198b3c740708bb6c5(Instance_0_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f45-1581-11df-b4f9-02004c4f4f50}(Instance_0_bpmboundary_new_24449a1f1a041ff7cd7deb8d764c6405{0d4c2925-157b-11df-b84e-02004c4f4f50}(?),null,Token_0_bpmboundary_new_24449a1f1a041ff7cd7deb8d764c6405{917829a3-1581-11df-b6e0-02004c4f4f50}(?),false),Scope_13_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f4a-1581-11df-94e6-02004c4f4f50}(Instance_0_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f45-1581-11df-b4f9-02004c4f4f50}(?)),4,*true)>
at com.sap.glx.core.kernel.trigger.node.LockingTreeJoinNode.process(LockingTreeJoinNode.java:638)
at com.sap.glx.core.kernel.trigger.core.BFSController.update(BFSController.java:173)
at com.sap.glx.core.kernel.trigger.impl.TriggerNetworkManagerImpl$SequentialController.update(TriggerNetworkManagerImpl.java:550)
at com.sap.glx.core.kernel.mmtx.AbstractTransaction.do_trigger(AbstractTransaction.java:199)
at com.sap.glx.core.kernel.mmtx.AbstractTransaction.do_prepare(AbstractTransaction.java:170)
... 90 more
Caused by: com.sap.glx.core.kernel.trigger.TriggerLockingException: Cannot acquire read row lock for after image (key = Instance_0_TaskHelloWorld2_ac33d162fa908f8198b3c740708bb6c5{919e4f45-1581-11df-b4f9-02004c4f4f50}(Instance_0_bpmboundary_new_24449a1f1a041ff7cd7deb8d764c6405{0d4c2925-157b-11df-b84e-02004c4f4f50}(?),null,Token_0_bpmboundary_new_24449a1f1a041ff7cd7deb8d764c6405{917829a3-1581-11df-b6e0-02004c4f4f50}(?),false), name = JOIN_CompletionDeadlineWithRealDelayConditionalSequenceConnector_context_join_0_69)
at com.sap.glx.core.kernel.trigger.node.LockingTreeJoinNode.lockAfterRow(LockingTreeJoinNode.java:308)
at com.sap.glx.core.kernel.trigger.node.LockingTreeJoinNode.process(LockingTreeJoinNode.java:636)
... 94 more

Hi,
sounds like an program error. That is an problem which occurs if one or multiple components try to lock the same galaxy object at the same point in time. Did you configured something special on the given task? e.g deadlines?
My proposal is to open an Customer Message so that we can have a detailed look onto the system. If this is not possible could you please provide the complete trace file and some more details about the modeled task?
Best Regards
Andreas

Excel service and OWA - getting ERROR while trying to open/edit Excel documents

Hi All,
We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
We are not able to view/edit the excel workbook from the browser (through OWA).
To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
Error details are given below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/25/2013 1:29:08 PM
Event time (UTC): 3/25/2013 7:59:08 AM
Event ID: fc2e0530f493493896e6c8b6297a0423
Event sequence: 10
Event occurrence: 3
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
    Trust level: Full
    Application Virtual Path: /x
    Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
    Machine name: VHYDMANTHSTP-02
Process information:
    Process ID: 1252
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: ArgumentException
    Exception message: An entry with the same key already exists.
   at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
    Request URL:
http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
    Request path: /x/_layouts/xlpreview.aspx
    User host address: 10.81.138.92
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 13
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
is microsoft alive??
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176

Error while trying to query mbean

I am getting an error while trying to query MBeans:
<Mar 27, 2007 4:27:32 AM MDT> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
ERROR: Tue Mar 27 04:27:32 MDT 2007MBeanHome being refreshed weblogic.management.NoAccessRuntimeException: User guest does not have access permission on weblogic.admin.mbean.MBeanHome
Bea doc says that the cause of this error is that the context is closed in a different thread than the one that created it. I have multiple thread that query the mbeans. The code that does the above is in a synchronized block. The code runs fine on some environments. On wls 8.1 it is giving the above error.
Anyone faced this issue? Any ideas, suggestions?
thanks a lot
Jain

Hi Daniel
Thanks for your help. Here is some more info.
I have another application that goes out and tries to get the MBeanHome. Here is the code:
Environment env = new Environment();
env.setProviderUrl(t3URL);
env.setSecurityPrincipal(t3UserName);
env.setSecurityCredentials(t3Password);
ctx = env.getInitialContext();
mBeanHome = (MBeanHome) ctx.lookup MBeanHome.ADMIN_JNDI_NAME);
This code runs fine in the app. where it is not threaded. But the same code when run in a separate thread is throwing the error. It is happening only in wbl 8.1. In wls 6.1 it runs fine. It is strange. Any clues will be appreciated.

Error while trying to configure Resource Object in Design Console

Hi,
I am getting the following error while trying to update any value in Resource Object(checking/unchecking any checkbox)
Description: Allow Multiple option cannot be changed from true to false. : Allow Multiple option cannot be changed from true to false.
Any clue as to what is happening?

We are on OIM 11.1.1.3 BP 6

Error while trying to open the discoverer connections page

Dears,
please your kindly help!!!
Error while trying to open the discoverer connections page
When I tried to open the link http://192.168.4.222:7778/discoverer/viewer
I received the error:
An error occurred while handling the event. See the application log for more details.
A fatal application error has occurred. Please consult with your OracleAS administrator or look at the application log file.
I checked the OC4J application.log file and I found the following:
10/03/11 10:34:16 discoverer: [ERROR] [AJPRequestHandler-ApplicationServerThread-6] oracle.discoverer.applications.framework.
GlobalExceptionHandler.execute null
java.lang.NullPointerException
at java.io.FileOutputStream.<init>(FileOutputStream.java:172)
at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
at java.awt.Font$2.run(Font.java:606)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Font.createFont(Font.java:600)
at oracle.discoverer.renderer.pdf.XDOConfig._discoverFonts(Unknown Source)
at oracle.discoverer.renderer.pdf.XDOConfig.<init>(Unknown Source)
at oracle.discoverer.renderer.pdf.XDOConfig.getNewInstance(Unknown Source)
at oracle.discoverer.renderer.pdf.PDFGenerator.initPDF(Unknown Source)
at oracle.discoverer.applications.viewer.model.ViewerApplication.init(Unknown Source)
at oracle.discoverer.applications.framework.ApplicationFactory.create(Unknown Source)
at oracle.discoverer.applications.framework.ApplicationController.getApplication(Unknown Source)
at oracle.discoverer.applications.framework.ApplicationController.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
invoke(ServletRequestDispatcher.java:824)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
forward(ServletRequestDispatcher.java:222)
at oracle.discoverer.applications.viewer.url.URLServlet._process(Unknown Source)
at oracle.discoverer.applications.viewer.url.URLServlet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFil
ter(ResourceFilterChain.java:65)
at oracle.discoverer.applications.framework.ApplicationEncodingFilter.doFilter(Unknown Source)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
invoke(ServletRequestDispatcher.java:663)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.proces
sRequest(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJP
RequestHandler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJP
RequestHandler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor
$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
10/03/11 10:34:16 discoverer: [ERROR] [AJPRequestHandler-ApplicationServerThread-6] oracle.discoverer.applications.framework.
ApplicationController._logException error.handling.event
oracle.discoverer.applications.framework.ApplicationException: error.handling.event
at oracle.discoverer.applications.framework.GlobalExceptionHandler.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processException(RequestProcessor.java:553)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:486)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
invoke(ServletRequestDispatcher.java:824)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
forward(ServletRequestDispatcher.java:222)
at oracle.discoverer.applications.viewer.url.URLServlet._process(Unknown Source)
at oracle.discoverer.applications.viewer.url.URLServlet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFil
ter(ResourceFilterChain.java:65)
at oracle.discoverer.applications.framework.ApplicationEncodingFilter.doFilter(Unknown Source)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
invoke(ServletRequestDispatcher.java:663)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.
forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.proces
sRequest(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJP
RequestHandler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJP
RequestHandler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor
$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.NullPointerException
at java.io.FileOutputStream.<init>(FileOutputStream.java:172)
at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
at java.awt.Font$2.run(Font.java:606)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Font.createFont(Font.java:600)
at oracle.discoverer.renderer.pdf.XDOConfig._discoverFonts(Unknown Source)
at oracle.discoverer.renderer.pdf.XDOConfig.<init>(Unknown Source)
at oracle.discoverer.renderer.pdf.XDOConfig.getNewInstance(Unknown Source)
at oracle.discoverer.renderer.pdf.PDFGenerator.initPDF(Unknown Source)
at oracle.discoverer.applications.viewer.model.ViewerApplication.init(Unknown Source)
at oracle.discoverer.applications.framework.ApplicationFactory.create(Unknown Source)
at oracle.discoverer.applications.framework.ApplicationController.getApplication(Unknown Source)
at oracle.discoverer.applications.framework.ApplicationController.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
... 21 more
10/03/11 10:34:16 discoverer: TemplateUINode, localName='documentTemplate': /u01/oracle/ias/j2ee/OC4J_BI_Forms/applications/d
iscoverer/discoverer/cabo/styles/dc-blaf.xss: Parsing error, line 5, column 22: <laf> is not an understood element.
This sometimes means the element's namespace (http://xmlns.oracle.com/uix/style) is set incorrectly. This may also be an issue with the syntax of its parent element.
Please anyone can help.
Best Regards ,
Yasser

Welcome to the forums !
Pl see if MOS Doc 360403.1 (Launcing Discoverer Plus Fails With Error "Oracle.Discoverer.Applications.Framework.Globalexceptionhandler.Execute Null" in Application.log File) is applicable in your case
HTH
Srini

Error while trying to install EBS 12.1.1

We are getting an error while trying to install EBS R12.1.1 on Linux x86_64 os(RHEL 5.2).We are getting the error at step 2 of 5 during database configuration stage 33% (65%) stage.The error is as given below,
RW-50004:Error code received when running external process.Check log files for details.Running Database Install Driver for TEST instance.
We checked the log files and in ApplyDB_****.log the error is
RW-50010 :script has returned an error: 1
How to fix these issues??
Regards,
Rupdipt

Hi Taj,
I am getting these error messages consistently throughout the log file,
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : testerp
sDbDomain : eigl.com
sDbPort : 1521
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@testerp.eigl.com:1521:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST.eigl.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST.eigl.com)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Wed Jul 22 17:47:10 IST 2009
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle/TEST/db/tech_st/11.1.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /d01/oracle/TEST/db/tech_st/11.1.0/perl/bin:/d01/oracle/TEST/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/d01/oracle/TEST/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/d04/StageR12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:.
LD_LIBRARY_PATH : /d01/oracle/TEST/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/TEST/db/tech_st/11.1.0/lib:/usr/dt/lib:/d01/oracle/TEST/db/tech_st/11.1.0/ctx/lib
Executable : /d01/oracle/TEST/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
     /d01/oracle/TEST/db/tech_st/11.1.0/appsutil/log/TEST_testerp/adcrdb_TEST.txt
Creating the control file for TEST_testerp database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Wed Jul 22 17:47:11 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size          2166536 bytes
Variable Size          427819256 bytes
Database Buffers     624951296 bytes
Redo Buffers          14000128 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'/d01/oracle/TEST/db/apps_st/data/system05.dbf'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.eigl.com"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size          2166536 bytes
Variable Size          427819256 bytes
Database Buffers     624951296 bytes
Redo Buffers          14000128 bytes
ORA-00205: error in identifying control file, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4652
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size          2166536 bytes
Variable Size          427819256 bytes
Database Buffers     624951296 bytes
Redo Buffers          14000128 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'/d01/oracle/TEST/db/apps_st/data/system05.dbf'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.eigl.com"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.1.0.7.0 - Production on Wed Jul 22 17:47:20 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
.end std out.
.end err out.
Whats the solution??
Regards,
Rupdipt

Solution for "Error while trying to synchronize Audio and MIDI" and "System Overload" messages

Article for those who hate Logic error windows
Seen in Logic Pro 9.1.7 on Mac OS X Lion 10.7.4
and Logic Pro 9.0.0 on Mac OS X Snow Leopard 10.6.5
Logic Pro:
System Overload.
The audio engine was not able to process all required data in time.
(-10011)
Error while trying to synchronize Audio and MIDI.
Sample Rate xxxxx recognized.
Check conflict between Logic Pro and external device.
The search in the help given as follows: overload occurs when you use a lot of tracks and a lot of effects on them, and the synchronization is lost when the selected MIDI track for recording or playback. Yes, this is all that is written in the resources. And here are useful tips that have been found:
The Bounce function allows the entire instrument track to be recorded as an audio file. This bounced audio file can then be used (as an audio region) on a standard audio track, allowing you to reassign the available processing power for further software instrument tracks. For more details, see "Bouncing Your Project."
You can also make use of the Freeze function to capture the output of a software instrument track, again saving processing power. For details, see "Freezing Tracks in the Arrange Area."
These tips - about the timing. About overload - there are no tips, except as "reducing the number of plug-ins" and "increasing latency". Zero useful tips - I got two errors in the test project with a blank audio track with no effects, MIDI drums and standard synthesizer, it was no aux buses, and the entire project was only a single plugin in the master track.
Here is the configuration of my computer:
iMac12, 2
CPU: Intel Core i5 3,1 GHz
Memory: 4 GB
And here's a project that almost immediately stops Logic, all instruments and plug-ins with the init-patch, ie not the most demanding settings:
It's sad.
When this happened the first time, I could start the project only if the empty audio track has been selected, a track specially designed so that you can at least start the project. Then, this problem has evaporated along with the changing conditions of work and I forgot about it until the last case.
I was looking for the cause of the problem in the console and the system monitor for two days, and finally I found that Logic ping to the network frequently. I remembered the exact time of occurrence of the problem, and system logs revealed that the problems began immediately, as soon as I deactivate the service of the Internet.
Solution: enable the Internet, or add a new network service on a computer with no Internet. I just created the Ethernet connection to the ip address 1.0.0.0
Logic immediately began to sing.

Hi gabaghoul
Yes, it worked for me on four different OS and Logic versions (10.6 - 10.8 and 9.0 - 9.1.6)
It does not work in some cases, hard enough to tell in which one, but you can try, it very easy: go to the net settings and create new Ethernet connection to the ip address 1.0.0.0 and connect LAN cable to the port.
Also you can try to figure out what happens in your system while Logic error occured - fot that you just start Console and search "logicpro"
Pay attention to repetitive events in a console and events with suitable timing, not so far from error
The problem may be related to the GUI or system memory, sometimes turning off Safari (or Chrome, others browsers) might help.
Message was edited by: spred

(rare?) Error while trying to synchronize Audio and MIDI.

Hello there,
My problem: Until today, I've been working with all my projects without any problems with my configuration, but today I've turned on the computer and when I play any project (including a new project with one or two audio tracks or the SAME PROJECT that i've been working the last night), 3 or 4 seconds later I get the fantastic and typical error from logic and an apparently more slow performance loading projects...
everytime... play, and error...play (or pause) and error...
"Error while trying to synchronize Audio and MIDI.
Sample Rate 41347 recognized.
Check conflict between Logic Pro and external device."
and sometimes... (randomly)
"System Overload. The audio engine was not able to process all required data in time."
... and I haven't touched anything / no updates / no setup changes... NOTHING.
I've tried all these things (searching in the forum) with NO luck:
http://support.apple.com/kb/TS2111
http://support.apple.com/kb/TA24535
My equipment:
Macbook pro 2,4 Intel Core 2 Duo / 2 GB RAM
Logic Pro 9.1.3
Snow Leopard 10.6.7
Motu ultralite Mk2
Lacie quadra 1 TB (FW800)
- I have a motu ultralite mk2, but i've tried with the built-in audio too, and I'll just get the same performance.
- I've tried with the lacie hardrive on and off and with projects in the internal hardrive and others with all the audios in the external.
The funny thing is that i've been working in a project this last night and all PERFECT, and now its impossible work with it, and I haven't changed anything.
PLEASE, any help? I'm confused and I need to finish some works...
THANKS!

If the MOTU unit has a reset procedure, unplug it from the Mac and do it now. That's simialr to what the older 828MkII units used do when they needed to be run through the reset procedure.
It can be caused by a Firewire/USB glitch or power surge when powering up the computer.
p.s.
As a side note, I remember that same error.....
"Error while trying to synchronize Audio and MIDI. Sample Rate 41347 recognized."
From Logic 3.5, it's been around for that long, with different sample rates of course.
Back then it was from bad audio drivers.. it's difficult to pin down some of these errors as they can be caused by different things.
pancenter-

Error while trying to process multiple Recordsets in Flat file.

Similar Messages

Maybe you are looking for