Error while trying to publish a site...

Hello,
I'm quite new to Muse and I wanted to try to publish my site, (which is at its very beginning) but I got an error message.
It says "Error: Error uploading file +.png. Click resume to try again. If this problem persists, try again later".
I know I did make the mistake of creating a file named "+", it was just for a test and I immediately deleted it, so I don't understand why it's asking for it while publishing. In doubt I checked the assets and did not find the file in the list. I renamed the file in my folder as "plus.png" and I made a search on my entire computer to make sure I hadn't forgotten one somewhere. I quitted Muse and relaunched it but the problem remains. Does anyone have an idea?
Thanks in advance

Sorry to have bothered. I found where the problem was. In fact, in one of my pages I had an animation made with Edge Animate and in the Images panel was the "+.png" that was causing the problem. I don't know why it's still there but it is. The animation I made has nothing to do with the plus image and that image is not used in the animation... well... I changed the name to plus.png and the problem was solved.

Similar Messages

Error while trying to publish a web service in UDDI client

hi
i m getting this error when trying to publish my web service in UDDI client.I have
configured my uddi client using Visual Administrator.I created a local test registry.The name of my registry is QuickCarRentalRegistry_Local.I created this at admin level.I also tried at level 1 Tier.But it was giving the same error.
The error is "<b> Internet Explorer Script Error</b>".my ie version is 7.0
In my alert window it displays error: 'ur_txt' is undefined.
Regards
mythri.

Hi mythri.
Did you find a way out of this error? Could you share the solution with me? Because I am facing a problem that looks just like the one you had.
Thanks in advance.
Renan

Error while trying to publish 2013 workflow via designer. Probably a workflow manager backend user account issue?

Hello, I am getting error while publishing the 2013 workflow via designer. Also, under sharepoint designer if I try to delete any workflow then the page just refreshes and the workflow does not get deleted.
I checked the services.msc and found that the workflow backend service was stopped. (this happened as the password of the user under which this serivce was running had changed).
So, the network admin changed the service user to LOCAL SYSTEM and started the service.
Now, the workflow backend service is started. We have run the iisreset also.
However, I am still getting the same error:-
System.IO.InvalidDataException: A response was returned that did not come from the Workflow Manager. Status code = 503:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>Service Unavailable</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD>
<BODY><h2>Service Unavailable</h2>
<hr><p>HTTP Error 503. The service is unavailable.</p>
</BODY></HTML>
Client ActivityId : ee94689c-4e08-b055-fe9c-268d7a94
Please find attached snapshot.
Is the error as a result of the change in service user? Can you tell me what priviledges should the account running the workflow backend service must have?
UPDATE 1:-
We have set the workflow service backend account user as farm admin and also tried to set it to site admin. The service is re-started. Now, for a new web application,
I can delete workflows. However, for existing site, I am not able to delete the existing workflows.. Also, I am not able to publish workflows (present under new and previous sites) and the error is same as described earlier.

Hi Nachiket,
According to your description, my understanding is that you got an error while publishing the 2013 workflow via SharePoint 2013 Designer.
As you have changed the password of this service. Please open IIS and make sure identify of the WorkflowMgmtPool is correct, you can re-type the identify. Then make this pool is started.
Open Services, find Service Bus Message Broker service and Windows Fabric Host Service. Make sure they are running. If not, firstly, start Windows Fabric Host Service, then start Service Bus Message Broker service. If Service Bus Message Broker service is
started, stop and re-start it.
Here are some similar posts for you to take a look at:
http://developers.de/blogs/damir_dobric/archive/2012/10/23/deploying-sharepoint-workflows.aspx
http://developers.de/blogs/damir_dobric/archive/2012/09/18/servicebus-message-broker-service-is-starting-and-starting.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Error while trying to publish

So I've been trying to publish my website and I keep receiving this error. I've tried deactivating my muse and signing back into muse incase it was a problem with my sign in information but I still continue to receive this "Unknown Adobe Business Catalyst error". I've attached a photo. Thanks in advance for any help with the issue.

This error usually occurs when Muse is not able to sign in to the Business catalyst account. Most common reasons are -
1. There is an outage on the Bc servers, you can always double check that here, http://status.businesscatalyst.com/
2. There is a system/network firewall blocking the connection. Please check with your IT if you are in a corporate environment or check the firewall or anti-virus settings.
If you still face this issue there could be something more specific about it, so in that case I will recommend that you contact the support using this link, http://helpx.adobe.com/contact/
- Abhishek Maurya

Sharepoint 2013: Workflow Error , while trying to publish a Sharepoint 2013 Workflow, from the Sharepoint Designer 2013

I don't know what might be wrong but I have tried everything possible I suppose.
Configuration: 1 App Server SharePoint Standard 2013 + SQL Server. On App Server, I have installed Workflow Manager as well.
Installed Sharepoint Designer 2013 on my laptop.
Before I was able to publish the workflows, but now it refuses, thwroing me the following error:
System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.WorkflowCommunicationException: The request was aborted: The request was canceled. Client ActivityId : ac85cf9c-053a-e0db-1f47-608050559d31. ---> System.Net.WebException:
The request was aborted: The request was canceled. ---> System.ServiceModel.CommunicationException: There was an error reading from the pipe: The pipe has been ended. (109, 0x6d). ---> System.IO.PipeException: There was an error reading from
What I have tried so far:
a. Re-installed Workflow, Service Bus, Windows Fabric, Sharepoint Designer... no luck
b. Run the configuration script... -Force enabled... no luck
c. Remove WF Manager, SB, etc... Deleted all WF and sb Databases from SQL, and re-installed all icluding updates... no luck
d. Tried to run services using Farm account, still no luck.
e. All services on the Server are running as well
f. The workflow is checked that it is associated with the site collection.
I don't know what else to try... seems like I am experiencing unique issue here... please help!

One last thing I can suggest - In case if you have installed CU Update for WF manager 1.0 and service bus. Some time that creates problem, [Please take backup before make any changes] -
- Clear everything, WF config , SharePoint WF setting, un register WF from SP , You can delete and recreate WF service Apps
- IISreset at WF and SP server
- Uninstall CU update for Workflow manager 1.0 and Service Bus from WF server [Control Panel - Programs - Update], you can delete all update installed
- ReStart WF server
- Reconfigure WF manager , Test WF sites , should return XML
Get-WFFarm | ft HttpPort
- Reconfigure WF at SP , Make sure should have enough free memory
Register-SPWorkflowService –SPSite "http://SPsite/" –WorkflowHostUri "http://WFServer:12291" –AllowOAuthHttp
http or https , depend on your configuration
And retest from SPD again.
Good luck:)
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

I keep getting an error when trying to publish my site

No matter how many of these errors I fix (edit the file and re-upload it onto the site), Muse comes up with a new error every time I try and publish. How can I resolve this issue, so I can publish my updated site. It should not be a problem with the files considering I have been able to publish the same files in the past...something is wrong with Muse itself.
PLEASE HELP! =)

Try this:
go to the System/MobileMe preference pane and log out of MMe.
login with a bogus username and password like "test" and "test". This clears the caches.
login with your correct username and password. launch iWeb and try again.
If the above doesn't help try the following:
close iWeb.
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
go to your Home/Library/Caches/com.apple.iWeb folder and delete its contents.
reboot.
launch iWeb and try again.
OT

Firefox continuously brings up errors while trying to load web sites.

Over the past few months I have been having problems with Firefox loading web sites. I get the error of either the connection timed out or server took too long to respond, etc, etc. I have done all the troubleshooting tips like emptying cookies, deleting history and I even started Firefox with all plugins and add on disabled and still the same thing. I did the update for the plugins and all that and still no luck. I even uninstalled Firefox and reinstalled Firefox. I checked to make sure it wasn't my system and I even disabled all addons, plugins, and anti virus software and still no luck. The same thing happens even in private browsing mode. This has been happening ever since the last Firefox update. I can't connect to eBay, Dell, and some others even after putting those sites on the safe lists in my firewall and everything. I have no problems with other browsers. And every once in a while if I click "Retry" the page will load fine. And when the "Retry" button doesn't work, I right click and choose reload which works from time to time. Opening up the error console under "Web Developer" option and select the errors tab, it lists nothing but a bunch of Java exception errors and wrong css coding for the sites.
So what is going on?

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

"unknown error" while trying to publish

I'm still publishing in Ilife 06.... I haven't edited my website for three months, last time it worked fine .. I just tried to edit .. won't work ... keep getting unknown error .. any help or suggestions would be appreciated thanks so much

1rodc wrote:
...keep getting unknown error...
Welcome to the discussions. If you're seeing this: +"Publish error: An unknown error occurred"+, take a look at this Apple doc:
_MobileMe: Troubleshooting iWeb publishing issues_.

Error while trying to publish a targeter in ATG10.2

The below error happens when we try to publish a targeter. Looks like an OOTB defect. The targeter goes through an publishes fine and works.
11:10:10,859 ERROR [STDERR] sax error:: D:\ATG\ATG10.2\DPS-UI\config\config.jar/atg/web/targeting/targetingPropertyConfiguration.xml : Attribute "xml-combine"
must be declared for element type "repository-property-configuration-registry". : line [9] : col [85]
Regards,
Naveen

Hi Shaik,
There are no errors in start up. This error is thrown only when we try to publish a targeter.
Regards,
Naveen

Get error when trying to publish crystal report to infoview

Hi, Gurus,
I got an error while trying to publish a Crystal report.
The error message says: Fail to read data from report file C:\TEMP~crw{70BDE794-E283-4773-A259-BA810F3E1697}.rpt. Failed to read parameter object.
I'm using a dynamic cascading parameter. The report runs fine in development enviornment.
I'm using Crystal 2008 SP2 and XI3.1
Thank you.
Kiki

There are several SAP NOTES (KB articles) on this error, have you tried searching Knowledge base ?
Most likely it's due to the fact that you have a verson mismatch between CR 2008 and XI3.1.

Keep getting this: Sorry, an error occurred while trying to publish. {"status":500,"message":"Error: [object Object]"}

My daughter is the first time user of Thimble. She is using your amazing tools to create a webpage but she can't save her work at all. Everytime she press SAVE, a message: Sorry, an error occurred while trying to publish. {"status":500,"message":"Error: [object Object]"} . Any suggestion to solving this problem will be greatly appreciated

Reload the webpage while bypassing the cache
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Clear the cache and the cookies from sites that cause problems.
'''Clear the Cache''': Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
'''Remove Cookies''' from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Error publishing a folio: An error has occurred while trying to publish your folio. We could not start this operation. Please try again later.

I can't publish a folio into my DPS Professional Account.
This is the error message:
An error has occurred while trying to publish your folio.
We could not start this operation. Please try again later.
Anyone can help?
Tks

Hi,
It seems there is something wrong with your sign up process, sorry for the inconvenience, this is technical forum, the account issue is out of our range, please follow steps below to contact with azure support, it's a best choice for you.
Get the support channel at:
http://www.windowsazure.com/en-us/support/options/
If you have any other concern, please feel free to let me know.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Shared error:21 while trying to publish to business catalyst!?

shared error:21 while trying to publish to business catalyst!? This never happened before I'm not sharing any login info. This is a new multinational client and mission critical. And now this!!!??? HELP!

Hello,
Please sign out of Muse and sign in again and this should fix the issue.
To sign out of Muse go to Help > Sign Out.
Regards
Vivek

Excel service and OWA - getting ERROR while trying to open/edit Excel documents

Hi All,
We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
We are not able to view/edit the excel workbook from the browser (through OWA).
To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
Error details are given below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/25/2013 1:29:08 PM
Event time (UTC): 3/25/2013 7:59:08 AM
Event ID: fc2e0530f493493896e6c8b6297a0423
Event sequence: 10
Event occurrence: 3
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
    Trust level: Full
    Application Virtual Path: /x
    Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
    Machine name: VHYDMANTHSTP-02
Process information:
    Process ID: 1252
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: ArgumentException
    Exception message: An entry with the same key already exists.
   at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
    Request URL:
http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
    Request path: /x/_layouts/xlpreview.aspx
    User host address: 10.81.138.92
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 13
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
is microsoft alive??
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176

Re: ERROR while trying to synchronize Audio and MIDI

Hi Guys/Gals
A bit of a strange one. Yes, I have posted a similar question concerning my trusted 2.7ghz G5 PPC and my Digidesign 003R which it turned out that the Digi's FW ports were to blame.
New issue. I have just completed an install on a client's machine, here's it's specs etc:
Hardware:
iMac 2.8Ghz Duo Core Intel, 4Gb ram, 500Gb HD etc (the custom top end before last week's upgrade) arrived last week. Running Leopard 10.5.2 and has all the latest updates. (firmware/software)
Apogee Ensemble (with newest firmware update/upgrade)
Iomega ULTRAMAX HARD DRIVE 1TB USB 2.0/FIREWIRE® 400/800 (sorry, copied from their site)
M-Audio Axiom 49 USB Midi controller/keyboard
Software:
Logic Pro 8 (latest 8.0.1) All standard plugs/samples, no third parties at all, just 100% Apple install.
Reason 4 (latest 4.0.1)
I reformatted the built-in hd to two partitions of equal size, one for the OS and one for whatever. I formated the external terrabyte into two partitions also of equal size, non are journalized, all are GUI partitions. I copied the LP 8 demos to both the internal "spare" partition and to the primary "Audio1" partition of the external drive. The Iomega HD is connected via the 800FW port and the Apogee Ensemble is connected via the 400FW port (the iMac has one of each). If I play any of the demo songs from the internal partition, they play perfectly, if I play them off the external Iomega partitions (either) within 8 bars I get:
"Error while trying to synchronize Audio and MIDI
Sample Rate 45946 recognized.
Check conflict between Logic Pro and external device."
As I said, any demo played back from the internal drives absolutely perfectly..... Any ideas?
Cheers!!
Bobs

There are a lot of different opinions about partitioning in Mac OS X and you can read some of them here:
http://forums.cnet.com/5208-7592_102-0.html?forumID=25&threadID=44865&messageID= 530144
and here
http://forums.appleinsider.com/archive/index.php/t-8096.html
My opinion is that partitions cam be useful when:
1. the OS can't manage big volumes (as it was in the past)
2. the OS can't optimize the space on big volumes
3. want to install 2 or more separate OSes
4. organization (like in your case).
Now, OS X filesystem (HFS+) is robust and reliable and OS X is a multitasking system that parallelizes I/O operations like reading or writing a disk.
So if you have 2 separate hard disk the system can parallelize the operations (i.e. reading from one and writing into another one) but if you have 2 partitions the system (or better the disk subsystem) have to jump back and forth among the partitions.
About the linking schema of the Audio interfaces and the FW hard disks it can change: I connect my FW disk to the MOTU and the MOTU to the mac while a friend of mine have to put the disk before of his Presonus.
Thanks for the beer!
cheers
rob

Error while trying to publish a site...

Similar Messages

Maybe you are looking for