Error while trying to publish a targeter in ATG10.2

The below error happens when we try to publish a targeter. Looks like an OOTB defect. The targeter goes through an publishes fine and works.
11:10:10,859 ERROR [STDERR] sax error:: D:\ATG\ATG10.2\DPS-UI\config\config.jar/atg/web/targeting/targetingPropertyConfiguration.xml : Attribute "xml-combine"
must be declared for element type "repository-property-configuration-registry". : line [9] : col [85]
Regards,
Naveen

Hi Shaik,
There are no errors in start up. This error is thrown only when we try to publish a targeter.
Regards,
Naveen

Similar Messages

Error while trying to publish a web service in UDDI client

hi
i m getting this error when trying to publish my web service in UDDI client.I have
configured my uddi client using Visual Administrator.I created a local test registry.The name of my registry is QuickCarRentalRegistry_Local.I created this at admin level.I also tried at level 1 Tier.But it was giving the same error.
The error is "<b> Internet Explorer Script Error</b>".my ie version is 7.0
In my alert window it displays error: 'ur_txt' is undefined.
Regards
mythri.

Hi mythri.
Did you find a way out of this error? Could you share the solution with me? Because I am facing a problem that looks just like the one you had.
Thanks in advance.
Renan

Error while trying to publish 2013 workflow via designer. Probably a workflow manager backend user account issue?

Hello, I am getting error while publishing the 2013 workflow via designer. Also, under sharepoint designer if I try to delete any workflow then the page just refreshes and the workflow does not get deleted.
I checked the services.msc and found that the workflow backend service was stopped. (this happened as the password of the user under which this serivce was running had changed).
So, the network admin changed the service user to LOCAL SYSTEM and started the service.
Now, the workflow backend service is started. We have run the iisreset also.
However, I am still getting the same error:-
System.IO.InvalidDataException: A response was returned that did not come from the Workflow Manager. Status code = 503:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>Service Unavailable</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD>
<BODY><h2>Service Unavailable</h2>
<hr><p>HTTP Error 503. The service is unavailable.</p>
</BODY></HTML>
Client ActivityId : ee94689c-4e08-b055-fe9c-268d7a94
Please find attached snapshot.
Is the error as a result of the change in service user? Can you tell me what priviledges should the account running the workflow backend service must have?
UPDATE 1:-
We have set the workflow service backend account user as farm admin and also tried to set it to site admin. The service is re-started. Now, for a new web application,
I can delete workflows. However, for existing site, I am not able to delete the existing workflows.. Also, I am not able to publish workflows (present under new and previous sites) and the error is same as described earlier.

Hi Nachiket,
According to your description, my understanding is that you got an error while publishing the 2013 workflow via SharePoint 2013 Designer.
As you have changed the password of this service. Please open IIS and make sure identify of the WorkflowMgmtPool is correct, you can re-type the identify. Then make this pool is started.
Open Services, find Service Bus Message Broker service and Windows Fabric Host Service. Make sure they are running. If not, firstly, start Windows Fabric Host Service, then start Service Bus Message Broker service. If Service Bus Message Broker service is
started, stop and re-start it.
Here are some similar posts for you to take a look at:
http://developers.de/blogs/damir_dobric/archive/2012/10/23/deploying-sharepoint-workflows.aspx
http://developers.de/blogs/damir_dobric/archive/2012/09/18/servicebus-message-broker-service-is-starting-and-starting.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Error while trying to publish

So I've been trying to publish my website and I keep receiving this error. I've tried deactivating my muse and signing back into muse incase it was a problem with my sign in information but I still continue to receive this "Unknown Adobe Business Catalyst error". I've attached a photo. Thanks in advance for any help with the issue.

This error usually occurs when Muse is not able to sign in to the Business catalyst account. Most common reasons are -
1. There is an outage on the Bc servers, you can always double check that here, http://status.businesscatalyst.com/
2. There is a system/network firewall blocking the connection. Please check with your IT if you are in a corporate environment or check the firewall or anti-virus settings.
If you still face this issue there could be something more specific about it, so in that case I will recommend that you contact the support using this link, http://helpx.adobe.com/contact/
- Abhishek Maurya

Sharepoint 2013: Workflow Error , while trying to publish a Sharepoint 2013 Workflow, from the Sharepoint Designer 2013

I don't know what might be wrong but I have tried everything possible I suppose.
Configuration: 1 App Server SharePoint Standard 2013 + SQL Server. On App Server, I have installed Workflow Manager as well.
Installed Sharepoint Designer 2013 on my laptop.
Before I was able to publish the workflows, but now it refuses, thwroing me the following error:
System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.WorkflowCommunicationException: The request was aborted: The request was canceled. Client ActivityId : ac85cf9c-053a-e0db-1f47-608050559d31. ---> System.Net.WebException:
The request was aborted: The request was canceled. ---> System.ServiceModel.CommunicationException: There was an error reading from the pipe: The pipe has been ended. (109, 0x6d). ---> System.IO.PipeException: There was an error reading from
What I have tried so far:
a. Re-installed Workflow, Service Bus, Windows Fabric, Sharepoint Designer... no luck
b. Run the configuration script... -Force enabled... no luck
c. Remove WF Manager, SB, etc... Deleted all WF and sb Databases from SQL, and re-installed all icluding updates... no luck
d. Tried to run services using Farm account, still no luck.
e. All services on the Server are running as well
f. The workflow is checked that it is associated with the site collection.
I don't know what else to try... seems like I am experiencing unique issue here... please help!

One last thing I can suggest - In case if you have installed CU Update for WF manager 1.0 and service bus. Some time that creates problem, [Please take backup before make any changes] -
- Clear everything, WF config , SharePoint WF setting, un register WF from SP , You can delete and recreate WF service Apps
- IISreset at WF and SP server
- Uninstall CU update for Workflow manager 1.0 and Service Bus from WF server [Control Panel - Programs - Update], you can delete all update installed
- ReStart WF server
- Reconfigure WF manager , Test WF sites , should return XML
Get-WFFarm | ft HttpPort
- Reconfigure WF at SP , Make sure should have enough free memory
Register-SPWorkflowService –SPSite "http://SPsite/" –WorkflowHostUri "http://WFServer:12291" –AllowOAuthHttp
http or https , depend on your configuration
And retest from SPD again.
Good luck:)
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Error while trying to publish a site...

Hello,
I'm quite new to Muse and I wanted to try to publish my site, (which is at its very beginning) but I got an error message.
It says "Error: Error uploading file +.png. Click resume to try again. If this problem persists, try again later".
I know I did make the mistake of creating a file named "+", it was just for a test and I immediately deleted it, so I don't understand why it's asking for it while publishing. In doubt I checked the assets and did not find the file in the list. I renamed the file in my folder as "plus.png" and I made a search on my entire computer to make sure I hadn't forgotten one somewhere. I quitted Muse and relaunched it but the problem remains. Does anyone have an idea?
Thanks in advance

Sorry to have bothered. I found where the problem was. In fact, in one of my pages I had an animation made with Edge Animate and in the Images panel was the "+.png" that was causing the problem. I don't know why it's still there but it is. The animation I made has nothing to do with the plus image and that image is not used in the animation... well... I changed the name to plus.png and the problem was solved.

"unknown error" while trying to publish

I'm still publishing in Ilife 06.... I haven't edited my website for three months, last time it worked fine .. I just tried to edit .. won't work ... keep getting unknown error .. any help or suggestions would be appreciated thanks so much

1rodc wrote:
...keep getting unknown error...
Welcome to the discussions. If you're seeing this: +"Publish error: An unknown error occurred"+, take a look at this Apple doc:
_MobileMe: Troubleshooting iWeb publishing issues_.

Get error when trying to publish crystal report to infoview

Hi, Gurus,
I got an error while trying to publish a Crystal report.
The error message says: Fail to read data from report file C:\TEMP~crw{70BDE794-E283-4773-A259-BA810F3E1697}.rpt. Failed to read parameter object.
I'm using a dynamic cascading parameter. The report runs fine in development enviornment.
I'm using Crystal 2008 SP2 and XI3.1
Thank you.
Kiki

There are several SAP NOTES (KB articles) on this error, have you tried searching Knowledge base ?
Most likely it's due to the fact that you have a verson mismatch between CR 2008 and XI3.1.

Error publishing a folio: An error has occurred while trying to publish your folio. We could not start this operation. Please try again later.

I can't publish a folio into my DPS Professional Account.
This is the error message:
An error has occurred while trying to publish your folio.
We could not start this operation. Please try again later.
Anyone can help?
Tks

Hi,
It seems there is something wrong with your sign up process, sorry for the inconvenience, this is technical forum, the account issue is out of our range, please follow steps below to contact with azure support, it's a best choice for you.
Get the support channel at:
http://www.windowsazure.com/en-us/support/options/
If you have any other concern, please feel free to let me know.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Shared error:21 while trying to publish to business catalyst!?

shared error:21 while trying to publish to business catalyst!? This never happened before I'm not sharing any login info. This is a new multinational client and mission critical. And now this!!!??? HELP!

Hello,
Please sign out of Muse and sign in again and this should fix the issue.
To sign out of Muse go to Help > Sign Out.
Regards
Vivek

Keep getting this: Sorry, an error occurred while trying to publish. {"status":500,"message":"Error: [object Object]"}

My daughter is the first time user of Thimble. She is using your amazing tools to create a webpage but she can't save her work at all. Everytime she press SAVE, a message: Sorry, an error occurred while trying to publish. {"status":500,"message":"Error: [object Object]"} . Any suggestion to solving this problem will be greatly appreciated

Reload the webpage while bypassing the cache
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Clear the cache and the cookies from sites that cause problems.
'''Clear the Cache''': Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
'''Remove Cookies''' from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Error while trying to instanciate IUriMapperService

Hello,
I'm getting an error while trying to instanciate the IUriMapperService.
The error I get is the following:
Failed to initialize the ServiceFactory: java.lang.NoClassDefFoundError: com/sapportals/wcm/crt/CrtClassLoaderRegistry
at com.sapportals.wcm.service.ServiceFactory.getInstance(ServiceFactory.java:66)
at com.sapportals.wcm.service.urimapper.UriMapperServiceFactory.getInstance(UriMapperServiceFactory.java:40)
The code I use is:
public String getGUIDFromPath(String path) {
          String guid = null;
          try {
               IUriMapperService mapper = UriMapperServiceFactory.getInstance(); //there is where I get the error
               guid = mapper.getGuidRIDFromRID(RID.getRID(path)).toString();
          } catch (Exception e) {
               guid = null;
          return guid;
Anybody knows what is wrong.
Thank you

Hi again,
more tracks:
If I use the same code:
public String getGUIDFromPath(String path) {
String guid = null;
try {
IUriMapperService mapper = UriMapperServiceFactory.getInstance(); //there is where I get the error
guid = mapper.getGuidRIDFromRID(RID.getRID(path)).toString();
} catch (Exception e) {
guid = null;
return guid;
in my WD it worked fine, no error occurs.
I have the following sharing reference in my WD: PORTAL:sap.com/com.sap.km.application.
But when I call the same method in my EJB I get the error described in the first post. The EAR has the sharing references:
<application-j2ee-engine>
     <reference
          reference-type="hard">
          <reference-target
               provider-name="upcnet.es"
               target-type="library">kmlibrar</reference-target>
     </reference>
     <reference
          reference-type="weak">
          <reference-target
               provider-name="sap.com"
               target-type="application">com.sap.km.application</reference-target>
     </reference>
     <provider-name>upcnet.es</provider-name>
     <fail-over-enable
          mode="disable"/>
</application-j2ee-engine>
Any hint to what I'm missing? I guess is a problem with the sharing references, but I can't see the error.

Error while installing BI Publisher Desktop - Plz Help

Hi all,
Getting following error while trying to install Oracle BI Publisher desktop
Template Builder Installer failed: Unexpected Error
-> I've downloaded "BI Publisher Desktop 10.1.3.4.2 for Windows" software from the following link
http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.html
-> OS: Windows 7 Enterprise (64-bit)
-> Microsoft Office Professional Plus 2010
-> I googled for answers, but none of the suggestions i found were working.
Please help..
Regards,
Srini

>
-> OS: Windows 7 Enterprise (64-bit)
-> Microsoft Office Professional Plus 2010
>
why not BI Publisher Desktop > 11
say BI Publisher Desktop 11.1.1.5.0
for BI Publisher Desktop 10.1.3.4.2 see System Requirements for BI Publisher Desktop Tools http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12690/T434820T487781.htm
>
Client Operating System
Windows 2000
Windows 2003 SP1 (32-bit only)
Windows XP SP2 and later
Windows Vista
>
so win7 may be rise an error because it's "Unexpected Error" :)

ORA-20600 error while trying to add RAC database

I'm receiving the following error while trying to add the RAC database in grid control. Any idea?.
ORA-20600: The specified target is in the process of being deleted
This database doesn't exists in targets. But, I'm still unable to add.

Check the metalink Note: Unable To Add Rac Database To Grid Control Getting Error Ora-20600 [ID 1218797.1]
You need to wait for a while and check the status.

Error while trying to provision OIM user to Active Directory using SSL

Hi All,
I am able to see the users through LDAP browser using SSL but am getting the following error while trying to provision OIM users to AD using SSL.
I am using Microsoft Active Directory connector type 9.11.
Response: Connection Error encountered
Response Description: Error encountered while connecting to target system
I did some testing using "Diagnostic Dashboard" and the following are the results.
Test Name: Target System SSL Trust Verification: Passed
Test Name: Test Basic Connectivity: Failed
Exceptions:
ITResource information values are not correct. Enter the correct values.
java.lang.reflect.InvocationTargetException
javax.naming.CommunicationException: simple bind failed:
unable to find valid certification path to requested target.Test Name: Test Provisioning:Failed
Note: Without SLL all the above tests got Passed.
Can anybody help me out from this issue.
Thanks in advance.
Pradeep Kumar.

I am able to connect to AD using 636 port number from LDAP browser and as the following test got Passed i think that my certificatee should be correct.
Test Name: Target System SSL Trust Verification.
Input Parameters
Target System: idm.orademo.com
Port: 636 Certificate Store
Location: /usr/java/jdk1.6.0_14/jre/lib/security/cacerts
Result : Passed
ITResource Values:
ADAM LockoutThreshold Value
ADGroup LookUp Definition     Lookup.ADReconciliation.GroupLookup
Admin FQDN     cn=Administrator,cn=Users,dc=orademo,dc=com
Admin Password     *******
Allow Password Provisioning     yes
AtMap ADGroup     AtMap.ADGroup
AtMap ADUser     AtMap.AD
Invert Display Name     no
Port Number     636
Remote Manager Prov Lookup     AtMap.AD.RemoteScriptlookUp
Remote Manager Prov Script Path
Root Context     dc=orademo,dc=com
Server Address     idm.orademo.com
Target Locale: TimeZone     GMT
UPN Domain     orademo.com
Use SSL     yes
isADAM     no
isLookupDN     no
isUserDeleteLeafNode     no
Thansk & Regards,
Pradeep Kumar.

Error while trying to publish a targeter in ATG10.2

Similar Messages

Maybe you are looking for