Error while trying to reinstall os x leopard

alright, my imac broke down on me and would not boot up, so I went to my friend and borrowed his install disk(leopard), I tried to reinstall the os and got an error message it says "the installer could not validate the contents of the 'Essentials package Contact the software manufacturer for assistance" someone help or give advice on what I should do?

You cannot use an install disc from another computer, it has o be the one that came with your machine.  You can, however, use a retail copy of Leopard, the one with the black face and the big X on it.

Similar Messages

  • I keep getting an error while trying to reinstall itunes?

    I am trying to reinstall itunes and i am having an issue. I keep getting an error while trying to install and I keep getting very far but I always seem to end up with this.
    "Could not open key
    UNKNOWN\Components\DA42BC89BF25F5BD0AF…
    \b25099274a207264182f8181add555d0.
    Verify that you have sufficient access to that key, or contact your support personnel"
    I was attempting to reinstall due to an error message appearing when I opened itunes
    "Itunes requires a newer version of Apple Mobile Device Support Please uninstall
    both Apple Mobile Device Support and iTunes, then install iTunes again."
    I have tried a few solutions and for the first error when installing one was an attempt at editing a registry file which I do not think succeeded because I am running windows 8 and was being directed for windows 7.

    "Could not open key
    UNKNOWN\Components\DA42BC89BF25F5BD0AF…
    \b25099274a207264182f8181add555d0.
    Doublechecking. Have you tried the following user tip?
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

  • !!!HI, SO I BOUGHT MOUNTAIN LION ON MY MACBOOK PRO TRYING TO UPGRADE FROM SNOW LEOPARD, AND WHILE TRYING TO REINSTALL THE OS SETUP AS IT SHOWED IT COULDNT BE VERIFIED, I CROSSED OUT MOUNTAIN LION FROM MY PURCHASES, ITS NOW GONE, DO I HAVE TO BUY IT AGAIN?

    HI, SO I BOUGHT MOUNTAIN LION ON MY MACBOOK PRO TRYING TO UPGRADE FROM SNOW LEOPARD, AND WHILE TRYING TO REINSTALL THE OS SETUP AS IT SHOWED IT COULDNT BE VERIFIED, I CROSSED OUT MOUNTAIN LION FROM MY PURCHASES, ITS NOW GONE, DO I HAVE TO BUY IT AGAIN?

    Please google search for "Mountain Lion disk crash" before upgrading you mac pro. You might need to replace you Mac hard drive after the upgrade.So many people had the same problems including me.
    Be aware of the Mountain Lion upgrade problem.

  • When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

    When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Error while trying to open RME home in Ciscoworks LMS 3.2

    Dear friends,
    I get the following error while trying to open RME home.
    "Error occurred while fetching Out-of-Sync count"
    Here's the exact error message:
    HOME0004: Error occurred while fetching Out-of-Sync count. Check RMEHome.log for more details.
    Pls advise.
    Thanks a lot
    Gautam

    Dear Jason,
    Now, i dont get this error and the home page opens but i get the following message in red text for some portions of RME:
    You are not authorized to view the detailsI also tried creating another user with full privileges and used his login but still i see the same results.I had installed LMS the first time in non-ACS mode and the second time i re-installed on top of the previous installation again because i got some Apache errors. I dont think that the reinstall prompted me for the ACS mode but from what i see, it is local and not ACS.Do you think that i should try to reinstall again Ciscoworks? Is reinstall better or uninstall and a subsequent fresh install?

  • Error while trying to create a new company

    Hey All
    I found an error while trying to create a new company.
    the Error like - No matching Records Found - [ODBC -2028]
    This can generate only database but not any tables in that database.
    Please help me.
    Thanking you
    Hepil Doshi

    Hello,
    I would prefer local language instead of US english.....
    My tips.
    1. DID you tried to Not apply the UDO/UDF things?
    2. Do not log in to the database, start from
    3. Please post the error message itself....
    4. If you are running on MS SQL 2005 server (not express) , You can start SQL profiler, and monitor the New Database creation.... you will see in profielr where is the error message and which tables / data is missing.
    If i know well,
    When you create a new company, the SBO-COMMON database is used to deploy the new database....
    If you get stock, reinstall your sbo-common from the last applyied patch..... (Detach SBO-common, move the files another directory, and start upgarder.exe).
    Regards,
    J.

  • Error while trying to retrieve text for error ORA-12705

    I am getting the message "Error while trying to retrieve text for error ORA-12705" when trying to connect to a remote oracle database on the network.
    I can access this database using:
    sqlplus username/password@database
    from a dos prompt.
    For some reason I can't connect when using PHP (through my local Apache2 server on Windows XP).
    'phpinfo' says oracle in enabled (installed as per: http://www.oracle.com/technology/pub/notes/technote_php_instant.html), so I'm pretty sure the problem isn't with php itself.
    My guess is it's something with Apache, and maybe environment variables or user permissions or instantclient (10).
    All the folders, from instantclient to the Apache server have full permissions set for "Everyone" which I would assume includes this mysterious "nobody" user I've read about.
    As for instantclient, I have placed that "tnsnames.ora" file from the oracle server there, and that hasn't changed much.
    I've tried setting, unsetting, editing (environment variables):
    LD_LIBRARY_PATH
    ORACLE_HOME
    ORACLE_SID
    TNS_ADMIN
    NLS_LANG
    ORA_NLS33
    in both the system environment, and even with PHP's "putenv" function. (Note: and restarting each time I changed a system var.)
    In PHP i'm using:
    $c = oci_connect("username","pasword", "database")
    I've tried OCILogon instead of oci_connect
    For "database" I've tried:
    - using the path to the oracle db: //Oracle1/e/oracle/ora81
    - mapping the path to x: drive and using: x:/oracle/ora81
    - using the name of the database by itself
    - using the name of the database underscored with the database name
    - using "(ADDRESS=(PROTOCOL=TCP)(HOST = host)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=database)))"
    I have tried everything I can find from:
    the Oracle installation page: http://www.oracle.com/technology/pub/notes/technote_php_instant.html
    the Oracle troubleshooting page: http://www.oracle.com/technology/tech/php/htdocs/php_troubleshooting_faq.html#connect
    and these forumswith no results, just the same error.
    I have also spent about 16 hours Googling for help, and nothing.
    Can someone please tell me, what exactly does a user using:
    Windows XP
    Apache 2
    PHP
    intantclient10
    Oracle 8i (on a remote server)
    need to do to connect to Oracle before jumping off a bridge?

    Turns out Oracle was previously installed on this company laptop :(
    I deleted any 'Oracle' mention in the registry with 'regedit' (from the command line) using the Find option. Not sure if it's always a good idea to do that, but I backed up the important stuff first anyway.
    I uninstalled and reinstalled everything using the same guide mentioned above, and then it worked.
    Now I can be friends with Oracle again.
    Would be nice if the "Deinstall" removed the registry entries that caused this issue...

  • HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

    HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

    I have the same problem, and the solutions in   Error changing modules | Lightroom do not work.  Even uninstalling and reinstalling a new copy did not solve the problem.  As anyone got an idea what other lingering files might be causing the problem?

  • Solution for "Error while trying to synchronize Audio and MIDI" and "System Overload" messages

    Article for those who hate Logic error windows
    Seen in Logic Pro 9.1.7 on Mac OS X Lion 10.7.4
    and Logic Pro 9.0.0 on Mac OS X Snow Leopard 10.6.5
    Logic Pro:
    System Overload.
    The audio engine was not able to process all required data in time.
    (-10011)
    Error while trying to synchronize Audio and MIDI.
    Sample Rate xxxxx recognized.
    Check conflict between Logic Pro and external device.
    The search in the help given as follows: overload occurs when you use a lot of tracks and a lot of effects on them, and the synchronization is lost when the selected MIDI track for recording or playback. Yes, this is all that is written in the resources. And here are useful tips that have been found:
    The Bounce function allows the entire instrument track to be recorded as an audio file. This bounced audio file can then be used (as an audio region) on a standard audio track, allowing you to reassign the available processing power for further software instrument tracks. For more details, see "Bouncing Your Project."
    You can also make use of the Freeze function to capture the output of a software instrument track, again saving processing power. For details, see "Freezing Tracks in the Arrange Area."
    These tips - about the timing. About overload - there are no tips, except as "reducing the number of plug-ins" and "increasing latency". Zero useful tips - I got two errors in the test project with a blank audio track with no effects, MIDI drums and standard synthesizer, it was no aux buses, and the entire project was only a single plugin in the master track.
    Here is the configuration of my computer:
    iMac12, 2
    CPU: Intel Core i5 3,1 GHz
    Memory: 4 GB
    And here's a project that almost immediately stops Logic, all instruments and plug-ins with the init-patch, ie not the most demanding settings:
    It's sad.
    When this happened the first time, I could start the project only if the empty audio track has been selected, a track specially designed so that you can at least start the project. Then, this problem has evaporated along with the changing conditions of work and I forgot about it until the last case.
    I was looking for the cause of the problem in the console and the system monitor for two days, and finally I found that Logic ping to the network frequently. I remembered the exact time of occurrence of the problem, and system logs revealed that the problems began immediately, as soon as I deactivate the service of the Internet.
    Solution: enable the Internet, or add a new network service on a computer with no Internet. I just created the Ethernet connection to the ip address 1.0.0.0
    Logic immediately began to sing.

    Hi gabaghoul
    Yes, it worked for me on four different OS and Logic versions (10.6 - 10.8 and 9.0 - 9.1.6)
    It does not work in some cases, hard enough to tell in which one, but you can try, it very easy: go to the net settings and create new Ethernet connection to the ip address 1.0.0.0 and connect LAN cable to the port.
    Also you can try to figure out what happens in your system while Logic error occured - fot that you just start Console and search "logicpro"
    Pay attention to repetitive events in a console and events with suitable timing, not so far from error
    The problem may be related to the GUI or system memory, sometimes turning off Safari (or Chrome, others browsers) might help.
    Message was edited by: spred

  • Re: ERROR while trying to synchronize Audio and MIDI

    Hi Guys/Gals
    A bit of a strange one. Yes, I have posted a similar question concerning my trusted 2.7ghz G5 PPC and my Digidesign 003R which it turned out that the Digi's FW ports were to blame.
    New issue. I have just completed an install on a client's machine, here's it's specs etc:
    Hardware:
    iMac 2.8Ghz Duo Core Intel, 4Gb ram, 500Gb HD etc (the custom top end before last week's upgrade) arrived last week. Running Leopard 10.5.2 and has all the latest updates. (firmware/software)
    Apogee Ensemble (with newest firmware update/upgrade)
    Iomega ULTRAMAX HARD DRIVE 1TB USB 2.0/FIREWIRE® 400/800 (sorry, copied from their site)
    M-Audio Axiom 49 USB Midi controller/keyboard
    Software:
    Logic Pro 8 (latest 8.0.1) All standard plugs/samples, no third parties at all, just 100% Apple install.
    Reason 4 (latest 4.0.1)
    I reformatted the built-in hd to two partitions of equal size, one for the OS and one for whatever. I formated the external terrabyte into two partitions also of equal size, non are journalized, all are GUI partitions. I copied the LP 8 demos to both the internal "spare" partition and to the primary "Audio1" partition of the external drive. The Iomega HD is connected via the 800FW port and the Apogee Ensemble is connected via the 400FW port (the iMac has one of each). If I play any of the demo songs from the internal partition, they play perfectly, if I play them off the external Iomega partitions (either) within 8 bars I get:
    "Error while trying to synchronize Audio and MIDI
    Sample Rate 45946 recognized.
    Check conflict between Logic Pro and external device."
    As I said, any demo played back from the internal drives absolutely perfectly..... Any ideas?
    Cheers!!
    Bobs

    There are a lot of different opinions about partitioning in Mac OS X and you can read some of them here:
    http://forums.cnet.com/5208-7592_102-0.html?forumID=25&threadID=44865&messageID= 530144
    and here
    http://forums.appleinsider.com/archive/index.php/t-8096.html
    My opinion is that partitions cam be useful when:
    1. the OS can't manage big volumes (as it was in the past)
    2. the OS can't optimize the space on big volumes
    3. want to install 2 or more separate OSes
    4. organization (like in your case).
    Now, OS X filesystem (HFS+) is robust and reliable and OS X is a multitasking system that parallelizes I/O operations like reading or writing a disk.
    So if you have 2 separate hard disk the system can parallelize the operations (i.e. reading from one and writing into another one) but if you have 2 partitions the system (or better the disk subsystem) have to jump back and forth among the partitions.
    About the linking schema of the Audio interfaces and the FW hard disks it can change: I connect my FW disk to the MOTU and the MOTU to the mac while a friend of mine have to put the disk before of his Presonus.
    Thanks for the beer!
    cheers
    rob

  • (rare?) Error while trying to synchronize Audio and MIDI.

    Hello there,
    My problem: Until today, I've been working with all my projects without any problems with my configuration, but today I've turned on the computer and when I play any project (including a new project with one or two audio tracks or the SAME PROJECT that i've been working the last night), 3 or 4 seconds later I get the fantastic and typical error from logic and an apparently more slow performance loading projects...
    everytime... play, and error...play (or pause) and error...
    "Error while trying to synchronize Audio and MIDI.
    Sample Rate 41347 recognized.
    Check conflict between Logic Pro and external device."
    and sometimes... (randomly)  
    "System Overload. The audio engine was not able to process all required data in time."
    ... and I haven't touched anything / no updates / no setup changes... NOTHING.
    I've tried all these things (searching in the forum) with NO luck:
    http://support.apple.com/kb/TS2111
    http://support.apple.com/kb/TA24535
    My equipment:
    Macbook pro 2,4 Intel Core 2 Duo / 2 GB RAM
    Logic Pro 9.1.3
    Snow Leopard 10.6.7
    Motu ultralite Mk2
    Lacie quadra 1 TB (FW800)
    - I have a motu ultralite mk2, but i've tried with the built-in audio too, and I'll just get the same performance.
    - I've tried with the lacie hardrive on and off and with projects in the internal hardrive and others with all the audios in the external.
    The funny thing is that i've been working in a project this last night and all PERFECT, and now its impossible work with it, and I haven't changed anything.
    PLEASE, any help? I'm confused and I need to finish some works...
    THANKS!

    If the MOTU unit has a reset procedure, unplug it from the Mac and do it now. That's simialr to what the older 828MkII units used do when they needed to be run through the reset procedure.
    It can be caused by a Firewire/USB glitch or power surge when powering up the computer.
    p.s.
    As a side note, I remember that same error.....
    "Error while trying to synchronize Audio and MIDI. Sample Rate 41347 recognized."
    From Logic 3.5, it's been around for that long, with different sample rates of course.
    Back then it was from bad audio drivers.. it's difficult to pin down some of these errors as they can be caused by different things.
    pancenter-

  • I keep getting an error that "iCloud encountered an error while trying to connect to the server". What's up?

    I've been getting an error most of the day that says "iCloud encountered an error while trying to connect to the server" on my pc. Also, anything I update on either iPad or iPhone does not update on the other device. What's up?

    Hello pongo19,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    Close iTunes and disconnect the iPhone, iPad, or iPod touch.
    Click the Windows Start button .
    In the Start Search field type Services.
    In the Programs section of the search results, Click "Services".
    Select Apple Mobile Device and click Stop the service as shown below:
    After the service has stopped, click Start the service.
    After the Apple Mobile Device service has started again, open iTunes and connect the device.
    Set the Apple Mobile Device Service Startup type to Automatic
    Remove and reinstall iTunes and AMDS
    Best of luck,
    Mario

  • Excel service and OWA - getting ERROR while trying to open/edit Excel documents

    Hi All,
    We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
    After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
    We are not able to view/edit the excel workbook from the browser (through OWA).
    To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
    Error details are given below:
    Event code: 3005
    Event message: An unhandled exception has occurred.
    Event time: 3/25/2013 1:29:08 PM
    Event time (UTC): 3/25/2013 7:59:08 AM
    Event ID: fc2e0530f493493896e6c8b6297a0423
    Event sequence: 10
    Event occurrence: 3
    Event detail code: 0
    Application information:
        Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
        Trust level: Full
        Application Virtual Path: /x
        Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
        Machine name: VHYDMANTHSTP-02
    Process information:
        Process ID: 1252
        Process name: w3wp.exe
        Account name: NT AUTHORITY\NETWORK SERVICE
    Exception information:
        Exception type: ArgumentException
        Exception message: An entry with the same key already exists.
       at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
       at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
       at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
       at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
       at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
       at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Request information:
        Request URL:
    http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
        Request path: /x/_layouts/xlpreview.aspx
        User host address: 10.81.138.92
        User: 
        Is authenticated: False
        Authentication Type: 
        Thread account name: NT AUTHORITY\NETWORK SERVICE
    Thread information:
        Thread ID: 13
        Thread account name: NT AUTHORITY\NETWORK SERVICE
        Is impersonating: False
        Stack trace:    at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
       at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
       at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
       at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
       at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
       at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
       at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

    I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
    One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
    is microsoft alive??
    Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176

  • "Error while trying to sync Audio and Midi"

    "Error while trying to sync Audio and Midi" I have been having this problem now and then for some time. Now, I can't run any audio files without a lot of popping. I tried all the suggestions on the support document for this issue. I even downloaded new drivers from Motu for my Express XT Midi interface and my 828MK11 Audio interface. There has been no change. HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!!!!!!
    Also, I have tried reseting the 828 to factory default and that does not help.
    Jonathan Jenkins

    Hi,
    I solved my own problem by resetting the factory presets:
    Follow these steps to restore the MOTU 828mkII to Factory Default Settings.
    Disconnect the firewire cable from the 828mkII
    Press the Setup knob
    Turn the Setup knob all the way to the right
    Press the Select knob
    Press the Value knob
    Power off the interface and plug the firewire cable back in
    Power the interface back on
    The same steps can be followed to restore the Factory Default Settings on a Traveler.
    -Robert

  • "Error While Trying To Synchronise Audio And Midi"...non-tempo event found

    "Error While Trying To Synchronise Audio And Midi"...non-tempo event found
    now when I shutdown Logic And relaunch the Project, the notes hang and "WHAT THE FRIIGIN"
    (this was a bug way back when Logic7 was first released)
    this is bad!
    SvK

    Thanks Steven.
    big help. In our session we keep getting this problem where the song counter stops, the music keeps playing and we get an error message saying:
    Non Tempo-Event found in Sync Reference
    We looked in the tempo list and somehow there was a tempo event of 0.00 tempo in there.
    We deleted it, got the same error message, but the prob seems to be fixed.
    Apple, please fix this!
    Thanks
    Felix

Maybe you are looking for