Error while trying to restore - "Resource was not found"

I just got a replacement for my old 60GB color Ipod.
I plug it in to restore to make it compatible for windows, and this is what I get:
"THERE WAS A PROBLEM DOWNLOADING THE iPOD SOFTWARE FOR THE iPOD. THE REQUESTED RESOURCE WAS NOT FOUND".
That's the error message that comes on when I try to restore.
I am using the brand new iTunes.

Thanks for the reply.
I did try and changed it several times but that didn't work. After about 4 hours of trying and disconnecting and removing deamon tools like someon suggested, i got it to be read, only to tell me that it is corrupt and that it needs to be restored.
After many tries again, i managed to restore it and start from scratch. It is currently working fine as I am loading it up with music. But if I disconnect it, that's it. No way to add any more new music, which completely *****.
I dont even know what I can do by now, and I dont see what could be the problem.

Similar Messages

HT201210 Hey guys, i was trying to restore my ipad 3 through itunes but it shows an error "The requested resource was not found".. so what do i do now?

Guys im getting an error "The requested resource was not found. what do i do???

Make sure you disable antivirus and firewall.
Reboot iPad and computer.

HT201210 When trying to restore the iPhone 4, I get a message that says "The requester resource was not found." What does this mean?

When trying to restore the iPhone 4, I get a message that says "The requester resource was not found." What does this mean?

Hi timtim89,
Thanks for visiting Apple Support Communities.
You may need to restore your iPhone after placing it in recovery mode. See this article for the steps:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Regards,
Jeremy

Problem restoring my iPod - "Resource was not found"

My iPod hardrive is a little bit dodgy (to say the least.) When I try to connect it to my computer, it comes up with an error message that says "ITunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod."
So I restore it, but then another message pops up that says "There was a problem downloading the iPod software for the iPod “iPod.” The requested resource was not found." and then iTunes stops recognizing my iPod.
Any suggestions?

i was also having the same problem. i seem to have fixed the problem but time will tell.
here is what i did.
1. you have to get rid of itunes 7. i did a lot of reading on the internet looking into error 1418 and 1429 and this is happening to a lot of people after they do the software update. trash everything except the itunes music folder, (where all of your mp3's a stored. don't empty the trash until you have your old songs back on your new old version of itunes 6, just to be safe.
2. find a download for itunes 6. not the easiest thing in the world but you should be able to find it on a bit torrent or ask a friend that might still be running on that to send you a copy.
3. you can try and restore your ipod with the old ipod updater that comes with itunes 6, (2006-01-10). it might not work the first time, it might not work after several. but at least give it a go. mine would update sometimes but then when i tried to play songs on it later it would just tear through songs and not play anything.
4. open up your disk utility program. i ran a repair permissions and repair disk first, both times i got a message saying there was a bad btree situation going on. if you don't get this message, i suggest trying to restore it again before you go to step five.
5. you are going to have to completely erase the **** thing. choose erase and pick the default option that comes up (mac os extended (journaled))
6. your ipod is going to be in disk mode now, don't trip out.
7. run the ipod updater again. once again, mine wouldn't allow me to eject the ipod once it was done so i just restarted it.
after all this, it opened up itunes and asked me to name my ipod. everything has been cool now since this morning. good luck!

I am trying to install itunes on my pc again but keep getting an error that says'apple application support was not found. try reinstalling itunes.' error 2

I am trying to install itunes on my pc again but keep getting an error that says'apple application support was not found. try reinstalling itunes.' error 2.
We have had itunes on this pc for 2 years and recently it wouldn't open and another error message kept popping up saying it couldn't open because MSVCR80.dll was missing. I have unistalled the apple programs and tried reinstalling several times but to no avail. Hopefully my music library is not gone. Any Ideas out there?

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

HT201442 I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

Error 3194:
This device isn't eligible for the requested build
It means that Apple has stopped signing the version of iOS that you have, try downloading the latest iOS version, then try Restore again.

HT201210 Im getting a message that says the ipad cant be restored because the requested resource was not found. what does this mean?

Im getting a message that says the ipad cant be restored because the requested resource was not found. what does this mean?

Hi timtim89,
Thanks for visiting Apple Support Communities.
You may need to restore your iPhone after placing it in recovery mode. See this article for the steps:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Regards,
Jeremy

Error code: 0x80070035 The network path was not found

"Error code: 0x80070035 The network path was not found" while trying to access another PC running Windows 7 Ultimate I searched and read dozens of similiar posts to try to resolve this issue with no success.
The situation is, I have a router in home with 4 PC's connected. My central PC is running Windows 7 Ultimate. The others are Windows 7 Ultimate again, and 2 running XP Pro. No special Firewalls, just have Windows Firewall enabled on all PC's, and am running KasperskyInternetSecurity2010 on all. (Have disabled these on all PC's and tried to view/connect and it didnt make a difference, same error)
Fact one: not attempting a Homegroup connection at all, just simply wishing to connect in a basic network environment where I can drag and drop files between all PC's in my Home Network or in my house , however its considered. But on the Windows 7 I am unable to view either of the XP's only the other Win7, and when I try to access that one is when I get the "Error code: 0x80070035 The network path was not found".
Furthermore, while troubleshooting the problem I opened a Command Prompt in all computers, then an "ipconfig" to view each ip address. Then began to ping each machine to determin connectivity. Which resulted in partial success. My main Win7 machine (which i am on now) was able to ping successfully to all machines. But all other machines were unable to ping to me (main Win7). with a 100% loss.
So at least I determined this is most likely a helpful fact in resolving this. Going into "services.msc" I made sure that all the obvious services are started and running:
DCHP Client, Homegroup Listener, Homegroup Provider, Link-Layer Topology Discovery Mapper, NetTcp Port SHaring Service, Network Connections, Network List Service, Network Location Awareness, TCP/IP NetBIOS Helper
All strarted and running in Automactic mode.
Not sure what other information I can give at this point, to help assist in fixing this problem. Please dont hesitate to ask for me for more info if needed. Ready and willing to try anything to get this working, except for reinstalling the OS. All my programs work great and do not wish to go through the drama ao reinstalling all my programs and activating them and redoing all my Adobe settings and CAD settings.
Someone please help !

Hi,
In addition, I would like to suggest the following:
Enable NetBIOS over TCP/IP:
1.    Go to “Control Panel\Network and Internet\Network Connections”.
2.    Right-Click on the connection and choose Properties.
3.    Click “Internet Protocol (TCP/IP) Version 4” in the list.
4.    Click Properties, and then click Advanced.
5.    On the Advanced TCP/IP settings windows, go to “WINS” tab.
6.    Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.
Thanks.
Nicholas Li - MSFT

Cannot Connect to the iTunes Store. Request Resource was not found

I hope you can help me.
I get the following error when trying to connect to the iTunes store.
iTunes could not connect to the iTunes store, the requested resource was not found.
I am running Norton Internet security and have allowed all permissions for iTunes.
Following is the diagnostics log:
Thanks,
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Latitude D820
iTunes 7.1.1.5
Current user is an administrator.
Network Adapter Information
Adapter Name: {21F2991F-5976-4BE0-8031-064BC7AC9AF0}
Description: Intel(R) PRO/Wireless 3945ABG Network Connection - Minipuerto del administrador de paquetes
IP Address: 192.168.2.26
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.200
DHCP Enabled: No
DNS Servers: 192.168.2.25
168.243.165.225
Adapter Name: {CB99A2BD-1A04-482A-BC5C-53E5597BA70B}
Description: Broadcom NetXtreme 57xx Gigabit Controller - Minipuerto del administrador de paquetes
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Mon Feb 12 11:09:06 2007
Lease Expires: Tue Feb 13 11:09:06 2007
DNS Servers: 192.168.2.25
168.243.165.225
Network Connection Information
Active Connection: Conexión LAN
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was unsuccessful.
A secure network connection could not be established.

Has anyone actually tried this suggestion posted by jeffporfiro's. He seems to be posting in any topic related to iTunes Store connection probs.
Is there any credibility to his suggestion? (below)
<<jeffporfirio wrote:
Solution is as follows:
Goto your C:\WINDOWS\system32\drivers
find a file named “hosts”, mine was located in a directory named “etc” under the “drivers” directory, rename the file, to something other than its name (eg. rem-old.host) and done ! >>

NQS Error: 47077 NQS Config .ini file was not found

Hi All,
I just installed OBIEE 11.1.1.7 on my windows 64 bit. And trying to install OBIA 7.9.6.4 on the top of this . While installing I am getting an error :
NQS Error : 47077 NQS Config.ini file was not found. Make sure your environment is set up properly.
Pleasw help me out guys.. I am new to this OBIA installation.

its a BUG
see this Installing BI Applications 7.9.6.4 on BI EE 11.1.1.7.0 (Doc ID 1561846.1)
Please down the attached file Technote1561846.1_InstallSecurity.zip and apply the solution.

Can not create a mobile Service RDFE: The upstream server reported that the resource was not found.

Hi,
I am trying to create a mobile service and no matter what I do I receive the attached error:
RDFE: The upstream server reported that the resource was not found.
What does this error mean and how do I resolve it.
I have created mobil services on this account a few days ago.. I deleted most of my azure resources and I am not sue I deleted one that is required for this

Thanks for reporting this problem. The Mobile Service team is looking into this, and we believe that we identified the issue. We are working on a fix now. I'll let you know when we've resolved the issue.

Error Code 0x80070035 - The network path was not found, Windows Server 2008 SP2

I have bee receiving following "error code 0x80070035 - The network path was not found" when trying to open file shares in both directions using Windows Server 2008 Standard SP2 at both ends. The issue is identical to the KB article KB958285, however the hotfix is only valid up to but not including SP2. One of the servers in question has moved several times between 2 subnets seperated by a VPN. I have tried changing settings in and around the local NIC/DNS Suffix and in the network connection sharing centre, but with no luck. Firewalls are turned off at both sites, and pings and AD queries are successful (one server is a DC). DNS is also working correctly at both sites. Any help/suggestions would be appreciated.
Richard

I thought I would add in another scenario, since this link came to the top of my list in the search engine.
We are running 2008 R2 with SP1 (it happened without SP1 as well)
We could not map using UNC (IP, FQDN, or netbios name). We could ping access the other servers via other utils like event viewer and services.msc but just could not map.
In our case it turned out to be a VMWARE issue but we still had to make a regedit change first
You have to go to regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\
And add LanmanWorkstation to Providerorder
I found on a Citrix board that citrix has an issue with this as well
If you're running VM here is an additional step you should do as well
When you upgrade VMware Tools installed with HGFS from ESX 3.x to ESX 4.x, the HGFS driver may not get uninstalled properly. In this case, the virtual machine's network Provider Order tab in Network Connections
> Advanced > Advanced Settings displays incorrect information and the virtual machine may lose network connectivity.
To avoid this issue, uninstall VMware Tools 3.x before installing VMware Tools 4.x.
To workaround this issue, if you have already upgraded VMware Tools:
Click Start >
Run, type regedit, and click OK. The Registry Editor window opens.
Navigate to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\.
Delete the reference to
hgfs.
Reboot the virtual machine.
We found that if you strip out the HGFS, you do not have to reboot for the provider order tab to come back
I hope that this saves people a lot of time. I spent days researching this.
This was the solution for me on 2008 R2 DC w/ Exchange. I do not have VMWare installed but do have Hyper-V. Thank you so much!

I get a message Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js Line: 366"] using Vista. I don't understand how to delete the "ebay

Every time I try to use google for a search, I get the following error msg. Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js Line: 366"]. I saw the solution provided for MS XP, but not for Vista. Also, while I saw the solution, I need more explicit instructions on how to "delete the ebay extension".
== This happened ==
Every time Firefox opened
== When I try to load google from Firefox, I get the error message, Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js Line: 366"]

Tools->Add-ons->Extensions
At the top of the Firefox window, click on the Tools menu and select Add-ons. The Add-ons window will appear.
In the Add-ons window, select the Extensions panel.
Select the add-on you wish to uninstall.
Click the Uninstall button. When prompted, click Uninstall to confirm.
Then restart Firefox.
Read here:
[[Uninstalling add-ons|#How to uninstall extensions and themes|Uninstalling extensions]]

Compilation error - FPGA NI PXI-7951R board - ERROR: Xst: 2472 - Top module Puma15Top was not found.

I'm trying to compile a "user CLIP socket" for the NI PXI board - 7951R which has a Virtex-5 LX30 FPGA from Xilinx, but I got the bellow message from NI Compiler, this message is in error report Xilinx.log.
It says that module Puma15Top was not found.
But this module is a NI property and is automatically compiled by NI Compiler.
The compiler automatically generates these files (Puma15Top...) that are passed to the compiler of Xilinx. The Puma15Top files are in the path, i.e: C: \ NIFPGA \ compilation \ Told_F_I_CC5DC260 \ source_files.
This folder name is automatically generated by labview (Told_F_I_CC5DC260) for each different project or compilation.
So I have no way to configure in CLIP files where it'll be Puma15Top, once the path is automatically generated during compilation by Labview.
Does anyone have any idea how to solve this problem? Or have you experienced some like this?
Following error log:
### XstSynthesis ###
Puma15Top
Reading design: Puma15Top.prj
=========================================================================
*                          HDL Compilation                              *
=========================================================================
Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_Conf.vhd" in Library work.
Entity <CLUC001_Conf> compiled.
Entity <CLUC001_Conf> (Architecture <behavioral>) compiled.
Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_CLIP.vhd" in Library work.
Entity <CLUC001_CLIP> compiled.
Entity <CLUC001_CLIP> (Architecture <rtl>) compiled.
Entity <CLUC001_CLIP> (Architecture <behavioral>) compiled.
ERROR:Xst:2472 - Top module <Puma15Top> was not found.
ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
-->
Total memory usage is 149596 kilobytes
Number of errors   :    2 (   0 filtered)
Number of warnings :    0 (   0 filtered)
Number of infos    :    0 (   0 filtered)
Process "Synthesis" failed
Thanks in advanced!

Hi Guilherme,
Thanks your suggestion, I upgraded NI-RIO to 13.1.1 version but the problem persists, as shown below:
Project: T_old.lvproj
Target: F (RIO0, PXI-7951R)
Build Specification: I_2
Top level VI: I.vi
Compiling on local compile server
Compilation Tool: Xilinx 11.5
Start Time: 2/9/2014 18:03:51
Run when loaded to Fpga: FALSE
JobId: z8Cq8B4
Working Directory: C:\NIFPGA\compilation\Told_F_I2_F3177096
Compilation failed due to a Xilinx error.
Details:
ERROR:Xst:2472 - Top module <Puma15Top> was not found.
ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
-->
Total memory usage is 149596 kilobytes
Number of errors   :    2 (   0 filtered)
Number of warnings :    0 (   0 filtered)
Number of infos    :    0 (   0 filtered)
Process "Synthesis" failed
Start Time: 18:03:51
End Time: 18:05:19
Total Time: 00:01:27,414
Best,
JEMP

Requested Resource Was Not Found

I tried accessing the Music Store, but get a message popup saying
"iTunes could not connect to iTunes Store. The Requested Resource was not found."
I quit and restarted the computer, and launched again. Same message. It was working yesterday just fine.

Some basic information would probably be helpful: your OS version, your iTunes version, how your system connects to the Internet, and what changes if any you've made to the system since it last worked. Otherwise people will be working in the dark to guess what to suggest.
Regards.

Error while trying to restore - "Resource was not found"

Similar Messages

Maybe you are looking for